- 23 Oct, 2018 2 commits
-
-
Markus Pargmann authored
BugLink: https://bugs.launchpad.net/bugs/1793464 It may be useful to know in the client that a connection timed out. The current code returns success for a timeout. This patch reports the error code -ETIMEDOUT for a timeout. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> (backported from commit 1f7b5cf1) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Kleber Souza <kleber.souza@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Markus Pargmann authored
BugLink: https://bugs.launchpad.net/bugs/1793464 As discussed on the mailing list, the usage of signals for timeout handling has a lot of potential issues. The nbd driver used for some time signals for timeouts. These signals where able to get the threads out of the blocking socket operations. This patch removes all signal usage and uses a socket shutdown instead. The socket descriptor itself is cleared later when the whole nbd device is closed. The tasks_lock is removed as we do not depend on this anymore. Instead a new lock for the socket is introduced so we can safely work with the socket in the timeout handler outside of the two main threads. Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> (backported from commit 23272a67) Signed-off-by:
-
- 22 Oct, 2018 2 commits
-
-
Kiran Kumar Modukuri authored
BugLink: https://bugs.launchpad.net/bugs/1797314 [Trace] seen this in 4.4.x kernels and the same bug affects fscache in latest upstreams kernels. Jun 25 11:32:08 kernel: [4740718.880898] FS-Cache: Jun 25 11:32:08 kernel: [4740718.880920] FS-Cache: Assertion failed Jun 25 11:32:08 kernel: [4740718.880934] FS-Cache: 0 > 0 is false Jun 25 11:32:08 kernel: [4740718.881001] ------------[ cut here ]------------ Jun 25 11:32:08 kernel: [4740718.881017] kernel BUG at /usr/src/linux-4.4.0/fs/fscache/operation.c:449! Jun 25 11:32:08 kernel: [4740718.881040] invalid opcode: 0000 [#1] SMP ... Jun 25 11:32:08 kernel: [4740718.892659] Call Trace: Jun 25 11:32:08 kernel: [4740718.893506] [<ffffffffc1464cf9>] cachefiles_read_copier+0x3a9/0x410 [cachefiles] Jun 25 11:32:08 kernel: [4740718.894374] [<ffffffffc037e272>] fscache_op_work_func+0x22/0x50 [fscache] Jun 25 11:32:08 kernel: [4740718.895180] [<ffffffff81096da0>] process_one_work+0x150/0x3f0 Jun 25 11:32:08 kernel: [4740718.895966] [<ffffffff8109751a>] worker_thread+0x11a/0x470 Jun 25 11:32:08 kernel: [4740718.896753] [<ffffffff81808e59>] ? __schedule+0x359/0x980 Jun 25 11:32:08 kernel: [4740718.897783] [<ffffffff81097400>] ? rescuer_thread+0x310/0x310 Jun 25 11:32:08 kernel: [4740718.898581] [<ffffffff8109cdd6>] kthread+0xd6/0xf0 Jun 25 11:32:08 kernel: [4740718.899469] [<ffffffff8109cd00>] ? kthread_park+0x60/0x60 Jun 25 11:32:08 kernel: [4740718.900477] [<ffffffff8180d0cf>] ret_from_fork+0x3f/0x70 Jun 25 11:32:08 kernel: [4740718.901514] [<ffffffff8109cd00>] ? kthread_park+0x60/0x60 [Problem] atomic_sub(n_pages, &op->n_pages); if (atomic_read(&op->n_pages) <= 0) fscache_op_complete(&op->op, true); The code in fscache_retrieval_complete is using atomic_sub followed by an atomic_read. This causes two threads doing a decrement of pages to race with each other seeing the op->refcount 0 at same time, and end up calling fscache_op_complete in both the threads leading to the OOPs. [Fix] The fix is trivial to use atomic_sub_return instead of two calls. Signed-off-by:
Kiran Kumar Modukuri <kiran.modukuri@gmail.com> (backported from https://www.redhat.com/archives/linux-cachefs/2018-September/msg00001.html The message has been on-list since 21 September 2018 and has received no feedback whatsoever. I have cleaned up the commit message a little bit and dropped a whitespace change.) Signed-off-by:
Daniel Axtens <daniel.axtens@canonical.com> Acked-by:
-
Mauricio Faria de Oliveira authored
BugLink: https://bugs.launchpad.net/bugs/1798110 The 'reqs' counter is incremented in the SCSI .queuecommand() path, right before virtscsi_queuecommand() is called, in either - virtscsi_queuecommand_single(), or - virtscsi_queuecommand_multi(), via virtscsi_pick_vq{_mq}(). And it's decremented only in the SCSI command completion callback (after the command is successfully queued and completed by adapter): - virtscsi_complete_cmd(). This allows for the counter to be incremented but _not_ decremented if virtscsi_queuecommand() gets an error to add/kick the command to the virtio ring (i.e., virtscsi_kick_cmd() fails with not 0 nor EIO). static virtscsi_queuecommand(...) { ... ret = virtscsi_kick_cmd(...) if (ret == -EIO) { ... virtscsi_complete_cmd(vscsi, cmd); ... } else if (ret != 0) { return SCSI_MLQUEUE_HOST_BUSY; } return 0; } In that case, the return code SCSI_MLQUEUE_HOST_BUSY causes the SCSI command to be requeued by the SCSI layer, which sends it again later in the .queuecommand() path -- incrementing the reqs counter _again_. This may happen many times for the same SCSI command, depending on the virtio ring condition/implementation, so the reqs counter will never return to zero (it's decremented only once in the completion callback). And it may happen for (m)any SCSI commands in this path. Unfortunately.. that causes a problem with a downstream/SAUCE patch for Xenial, which uses the reqs counter to sync with the completion callback: commit f1f609d8 ("UBUNTU: SAUCE: (no-up) virtio-scsi: Fix race in target free"), and waits for the value to become zero. This problem plus that patch prevent the SCSI target removal from finishing, eventually causing a CPU soft lockup on another CPU that is waiting for some kernel resource that is/remains locked in the stack chain of this CPU. This has been verified 1) with a synthetic test case with QEMU+GDB that fakes the number of available elements in virtio ring for one time (harmless), so to force the SCSI command to be requeued, then uses QEMU monitor to remove the virtio-scsi target. _AND_ 2) with the test-case reported by the customer (a for-loop on a cloud instance that repeatedly mounts the virtio-scsi drive, copy data out of it, unmount it, then detach the virtio-scsi drive). (Here, the problem usually happens in the 1st or 2nd iteration, but with the patch it has run for 35 iterations without any problems). Upstream has done away with the reqs counter (originally used only to check if any requests were still active, for steering; not for our sync purposes). Instead of trying to find an alternative sync way for now let's just fix the behavior which we know is incorrect. Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Tested-by:
David Coronel <david.coronel@canonical.com> Acked-by:
-
- 19 Oct, 2018 36 commits
-
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1769937 Sync with zfsutils-linux 0.6.5.6-0ubuntu26 to pick up fixes for LP#1769937. Upstream ZFS fix 4ceb8dd6fdfd ("Fix 'zpool create -t <tempname>'") fixes error message and error exit when using the -t option when creating a pool. Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1798770Signed-off-by:
-
Mike Snitzer authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit 013ad043 upstream. sector_div() is only viable for use with sector_t. dm_block_t is typedef'd to uint64_t -- so use div_u64() instead. Fixes: 3ab91828 ("dm thin metadata: try to avoid ever aborting transactions") Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ashish Samant authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit cbe355f5 upstream. In dlm_init_lockres() we access and modify res->tracking and dlm->tracking_list without holding dlm->track_lock. This can cause list corruptions and can end up in kernel panic. Fix this by locking res->tracking and dlm->tracking_list with dlm->track_lock instead of dlm->spinlock. Link: http://lkml.kernel.org/r/1529951192-4686-1-git-send-email-ashish.samant@oracle.comSigned-off-by:
Ashish Samant <ashish.samant@oracle.com> Reviewed-by:
Changwei Ge <ge.changwei@h3c.com> Acked-by:
Joseph Qi <jiangqi903@gmail.com> Acked-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit f8a00cef upstream. Currently, you can use /proc/self/task/*/stack to cause a stack walk on a task you control while it is running on another CPU. That means that the stack can change under the stack walker. The stack walker does have guards against going completely off the rails and into random kernel memory, but it can interpret random data from your kernel stack as instruction pointers and stack pointers. This can cause exposure of kernel stack contents to userspace. Restrict the ability to inspect kernel stacks of arbitrary tasks to root in order to prevent a local attacker from exploiting racy stack unwinding to leak kernel task stack contents. See the added comment for a longer rationale. There don't seem to be any users of this userspace API that can't gracefully bail out if reading from the file fails. Therefore, I believe that this change is unlikely to break things. In the case that this patch does end up needing a revert, the next-best solution might be to fake a single-entry stack based on wchan. Link: http://lkml.kernel.org/r/20180927153316.200286-1-jannh@google.com Fixes: 2ec220e2 ("proc: add /proc/*/stack") Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ken Chen <kenchen@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Leonard Crestez authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit d80771c0 upstream. When compiling with CONFIG_DEBUG_ATOMIC_SLEEP=y the mxs-dcp driver prints warnings such as: WARNING: CPU: 0 PID: 120 at kernel/sched/core.c:7736 __might_sleep+0x98/0x9c do not call blocking ops when !TASK_RUNNING; state=1 set at [<8081978c>] dcp_chan_thread_sha+0x3c/0x2ec The problem is that blocking ops will manipulate current->state themselves so it is not allowed to call them between set_current_state(TASK_INTERRUPTIBLE) and schedule(). Fix this by converting the per-chan mutex to a spinlock (it only protects tiny list ops anyway) and rearranging the wait logic so that callbacks are called current->state as TASK_RUNNING. Those callbacks will indeed call blocking ops themselves so this is required. Cc: <stable@vger.kernel.org> Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit 709ae62e upstream. The issue is the same as commit dd9aa335 ("ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO"), the output requires to connect to a node with Amp-out capability. Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue. BugLink: https://bugs.launchpad.net/bugs/1775068Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Aurelien Aptel authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit 0595751f upstream. When mounting a Windows share that is the root of a drive (eg. C$) the server does not return . and .. directory entries. This results in the smb2 code path erroneously skipping the 2 first entries. Pseudo-code of the readdir() code path: cifs_readdir(struct file, struct dir_context) initiate_cifs_search <-- if no reponse cached yet server->ops->query_dir_first dir_emit_dots dir_emit <-- adds "." and ".." if we're at pos=0 find_cifs_entry initiate_cifs_search <-- if pos < start of current response (restart search) server->ops->query_dir_next <-- if pos > end of current response (fetch next search res) for(...) <-- loops over cur response entries starting at pos cifs_filldir <-- skip . and .., emit entry cifs_fill_dirent dir_emit pos++ A) dir_emit_dots() always adds . & .. and sets the current dir pos to 2 (0 and 1 are done). Therefore we always want the index_to_find to be 2 regardless of if the response has . and .. B) smb1 code initializes index_of_last_entry with a +2 offset in cifssmb.c CIFSFindFirst(): psrch_inf->index_of_last_entry = 2 /* skip . and .. */ + psrch_inf->entries_in_buffer; Later in find_cifs_entry() we want to find the next dir entry at pos=2 as a result of (A) first_entry_in_buffer = cfile->srch_inf.index_of_last_entry - cfile->srch_inf.entries_in_buffer; This var is the dir pos that the first entry in the buffer will have therefore it must be 2 in the first call. If we don't offset index_of_last_entry by 2 (like in (B)), first_entry_in_buffer=0 but we were instructed to get pos=2 so this code in find_cifs_entry() skips the 2 first which is ok for non-root shares, as it skips . and .. from the response but is not ok for root shares where the 2 first are actual files pos_in_buf = index_to_find - first_entry_in_buffer; // pos_in_buf=2 // we skip 2 first response entries :( for (i = 0; (i < (pos_in_buf)) && (cur_ent != NULL); i++) { /* go entry by entry figuring out which is first */ cur_ent = nxt_dir_entry(cur_ent, end_of_smb, cfile->srch_inf.info_level); } C) cifs_filldir() skips . and .. so we can safely ignore them for now. Sample program: int main(int argc, char **argv) { const char *path = argc >= 2 ? argv[1] : "."; DIR *dh; struct dirent *de; printf("listing path <%s>\n", path); dh = opendir(path); if (!dh) { printf("opendir error %d\n", errno); return 1; } while (1) { de = readdir(dh); if (!de) { if (errno) { printf("readdir error %d\n", errno); return 1; } printf("end of listing\n"); break; } printf("off=%lu <%s>\n", de->d_off, de->d_name); } return 0; } Before the fix with SMB1 on root shares: <.> off=1 <..> off=2 <$Recycle.Bin> off=3 <bootmgr> off=4 and on non-root shares: <.> off=1 <..> off=4 <-- after adding .., the offsets jumps to +2 because <2536> off=5 we skipped . and .. from response buffer (C) <411> off=6 but still incremented pos <file> off=7 <fsx> off=8 Therefore the fix for smb2 is to mimic smb1 behaviour and offset the index_of_last_entry by 2. Test results comparing smb1 and smb2 before/after the fix on root share, non-root shares and on large directories (ie. multi-response dir listing): PRE FIX ======= pre-1-root VS pre-2-root: ERR pre-2-root is missing [bootmgr, $Recycle.Bin] pre-1-nonroot VS pre-2-nonroot: OK~ same files, same order, different offsets pre-1-nonroot-large VS pre-2-nonroot-large: OK~ same files, same order, different offsets POST FIX ======== post-1-root VS post-2-root: OK same files, same order, same offsets post-1-nonroot VS post-2-nonroot: OK same files, same order, same offsets post-1-nonroot-large VS post-2-nonroot-large: OK same files, same order, same offsets REGRESSION? =========== pre-1-root VS post-1-root: OK same files, same order, same offsets pre-1-nonroot VS post-1-nonroot: OK same files, same order, same offsets BugLink: https://bugzilla.samba.org/show_bug.cgi?id=13107Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Paulo Alcantara <palcantara@suse.deR> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Josh Abraham authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 4dca864b ] This patch removes duplicate macro useage in events_base.c. It also fixes gcc warning: variable ‘col’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Joshua Abraham <j.abraham1776@gmail.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Olaf Hering authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 3366cdb6 ] The command 'xl vcpu-set 0 0', issued in dom0, will crash dom0: BUG: unable to handle kernel NULL pointer dereference at 00000000000002d8 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 65 Comm: xenwatch Not tainted 4.19.0-rc2-1.ga9462db-default #1 openSUSE Tumbleweed (unreleased) Hardware name: Intel Corporation S5520UR/S5520UR, BIOS S5500.86B.01.00.0050.050620101605 05/06/2010 RIP: e030:device_offline+0x9/0xb0 Code: 77 24 00 e9 ce fe ff ff 48 8b 13 e9 68 ff ff ff 48 8b 13 e9 29 ff ff ff 48 8b 13 e9 ea fe ff ff 90 66 66 66 66 90 41 54 55 53 <f6> 87 d8 02 00 00 01 0f 85 88 00 00 00 48 c7 c2 20 09 60 81 31 f6 RSP: e02b:ffffc90040f27e80 EFLAGS: 00010203 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff8801f3800000 RSI: ffffc90040f27e70 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffff820e47b3 R09: 0000000000000000 R10: 0000000000007ff0 R11: 0000000000000000 R12: ffffffff822e6d30 R13: dead000000000200 R14: dead000000000100 R15: ffffffff8158b4e0 FS: 00007ffa595158c0(0000) GS:ffff8801f39c0000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002d8 CR3: 00000001d9602000 CR4: 0000000000002660 Call Trace: handle_vcpu_hotplug_event+0xb5/0xc0 xenwatch_thread+0x80/0x140 ? wait_woken+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x3a/0x50 This happens because handle_vcpu_hotplug_event is called twice. In the first iteration cpu_present is still true, in the second iteration cpu_present is false which causes get_cpu_device to return NULL. In case of cpu#0, cpu_online is apparently always true. Fix this crash by checking if the cpu can be hotplugged, which is false for a cpu that was just removed. Also check if the cpu was actually offlined by device_remove, otherwise leave the cpu_present state as it is. Rearrange to code to do all work with device_hotplug_lock held. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Reviewed-by:
-
Vitaly Kuznetsov authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 87dffe86 ] When guest receives a sysrq request from the host it acknowledges it by writing '\0' to control/sysrq xenstore node. This, however, make xenstore watch fire again but xenbus_scanf() fails to parse empty value with "%c" format string: sysrq: SysRq : Emergency Sync Emergency Sync complete xen:manage: Error -34 reading sysrq code in control/sysrq Ignore -ERANGE the same way we already ignore -ENOENT, empty value in control/sysrq is totally legal. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 097f5863 ] We need to verify that the "data_offset" is within bounds. Reported-by:
Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 0ac1487c ] For inbound data with an unsupported HW header format, only dump the actual HW header. We have no idea how much payload follows it, and what it contains. Worst case, we dump past the end of the Inbound Buffer and access whatever is located next in memory. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 6ad56901 ] After system suspend, sometimes the r8169 doesn't work when ethernet cable gets pluggued. This issue happens because rtl_reset_work() doesn't get called from rtl8169_runtime_resume(), after system suspend. In rtl_task(), RTL_FLAG_TASK_* only gets cleared if this condition is met: if (!netif_running(dev) || !test_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags)) ... If RTL_FLAG_TASK_ENABLED was cleared during system suspend while RTL_FLAG_TASK_RESET_PENDING was set, the next rtl_schedule_task() won't schedule task as the flag is still there. So in addition to clearing RTL_FLAG_TASK_ENABLED, also clears other flags. Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Miguel Ojeda authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 13aceef0 ] All other uses of "asm goto" go through asm_volatile_goto, which avoids a miscompile when using GCC < 4.8.2. Replace our open-coded "asm goto" statements with the asm_volatile_goto macro to avoid issues with older toolchains. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 5c41aaad ] Building drivers/mtd/nand/raw/nandsim.c on arch/hexagon/ produces a printk format build warning. This is due to hexagon's ffs() being coded as returning long instead of int. Fix the printk format warning by changing all of hexagon's ffs() and fls() functions to return int instead of long. The variables that they return are already int instead of long. This return type matches the return type in <asm-generic/bitops/>. ../drivers/mtd/nand/raw/nandsim.c: In function 'init_nandsim': ../drivers/mtd/nand/raw/nandsim.c:760:2: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'long int' [-Wformat] There are no ffs() or fls() allmodconfig build errors after making this change. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-hexagon@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Patch-mainline: linux-kernel @ 07/22/2018, 16:03 Signed-off-by:
Richard Kuo <rkuo@codeaurora.org> Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 200f351e ] Fix build warning in arch/hexagon/kernel/dma.c by casting a void * to unsigned long to match the function parameter type. ../arch/hexagon/kernel/dma.c: In function 'arch_dma_alloc': ../arch/hexagon/kernel/dma.c:51:5: warning: passing argument 2 of 'gen_pool_add' makes integer from pointer without a cast [enabled by default] ../include/linux/genalloc.h:112:19: note: expected 'long unsigned int' but argument is of type 'void *' Signed-off-by:
-
Joe Thornber authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 3ab91828 ] Committing a transaction can consume some metadata of it's own, we now reserve a small amount of metadata to cover this. Free metadata reported by the kernel will not include this reserve. If any of the reserve has been used after a commit we enter a new internal state PM_OUT_OF_METADATA_SPACE. This is reported as PM_READ_ONLY, so no userland changes are needed. If the metadata device is resized the pool will move back to PM_WRITE. These changes mean we never need to abort and rollback a transaction due to running out of metadata space. This is particularly important because there have been a handful of reports of data corruption against DM thin-provisioning that can all be attributed to the thin-pool having ran out of metadata space. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Stephen Rothwell authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit bcfb84a9 ] A powerpc build of cifs with gcc v8.2.0 produces this warning: fs/cifs/cifssmb.c: In function ‘CIFSSMBNegotiate’: fs/cifs/cifssmb.c:605:3: warning: ‘strncpy’ writing 16 bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] strncpy(pSMB->DialectsArray+count, protocols[i].name, 16); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Since we are already doing a strlen() on the source, change the strncpy to a memcpy(). Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Ben Skeggs authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 0a6986c6 ] This Falcon application doesn't appear to be present on some newer systems, so let's not fail init if we can't find it. TBD: is there a way to determine whether it *should* be there? Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ben Hutchings authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 14427b86 ] snprintf() always returns the full length of the string it could have printed, even if it was truncated because the buffer was too small. So in case the counter value is truncated, we will over-read from in_buffer and over-write to the caller's buffer. I don't think it's actually possible for this to happen, but in case truncation occurs, WARN and return -EIO. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 0d23ba60 ] The current code grabs the private_data of whatever file descriptor userspace has supplied and implicitly casts it to a `struct ucma_file *`, potentially causing a type confusion. This is probably fine in practice because the pointer is only used for comparisons, it is never actually dereferenced; and even in the comparisons, it is unlikely that a file from another filesystem would have a ->private_data pointer that happens to also be valid in this context. But ->private_data is not always guaranteed to be a valid pointer to an object owned by the file's filesystem; for example, some filesystems just cram numbers in there. Check the type of the supplied file descriptor to be safe, analogous to how other places in the kernel do it. Fixes: 88314e4d ("RDMA/cma: add support for rdma_migrate_id()") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Sandipan Das authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit fa694160 ] This makes sure that the SyS symbols are ignored for any powerpc system, not just the big endian ones. Reported-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Reviewed-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Anton Vasilyev authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit c37bd528 ] There is no deallocation of fotg210->ep[i] elements, allocated at fotg210_udc_probe. The patch adds deallocation of fotg210->ep array elements and simplifies error path of fotg210_udc_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Daniel Black authored
BugLink: https://bugs.launchpad.net/bugs/1798770 commit d41aa525 upstream. Reproducer, assuming 2M of hugetlbfs available: Hugetlbfs mounted, size=2M and option user=testuser # mount | grep ^hugetlbfs hugetlbfs on /dev/hugepages type hugetlbfs (rw,pagesize=2M,user=dan) # sysctl vm.nr_hugepages=1 vm.nr_hugepages = 1 # grep Huge /proc/meminfo AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 1 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 2048 kB Code: #include <sys/mman.h> #include <stddef.h> #define SIZE 2*1024*1024 int main() { void *ptr; ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_HUGETLB | MAP_ANONYMOUS, -1, 0); madvise(ptr, SIZE, MADV_DONTDUMP); madvise(ptr, SIZE, MADV_DODUMP); } Compile and strace: mmap(NULL, 2097152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB, -1, 0) = 0x7ff7c9200000 madvise(0x7ff7c9200000, 2097152, MADV_DONTDUMP) = 0 madvise(0x7ff7c9200000, 2097152, MADV_DODUMP) = -1 EINVAL (Invalid argument) hugetlbfs pages have VM_DONTEXPAND in the VmFlags driver pages based on author testing with analysis from Florian Weimer[1]. The inclusion of VM_DONTEXPAND into the VM_SPECIAL defination was a consequence of the large useage of VM_DONTEXPAND in device drivers. A consequence of [2] is that VM_DONTEXPAND marked pages are unable to be marked DODUMP. A user could quite legitimately madvise(MADV_DONTDUMP) their hugetlbfs memory for a while and later request that madvise(MADV_DODUMP) on the same memory. We correct this omission by allowing madvice(MADV_DODUMP) on hugetlbfs pages. [1] https://stackoverflow.com/questions/52548260/madvisedodump-on-the-same-ptr-size-as-a-successful-madvisedontdump-fails-wit [2] commit 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Link: http://lkml.kernel.org/r/20180930054629.29150-1-daniel@linux.ibm.com Link: https://lists.launchpad.net/maria-discuss/msg05245.html Fixes: 0103bd16 ("mm: prepare VM_DONTDUMP for using in drivers") Reported-by:
Kenneth Penza <kpenza@gmail.com> Signed-off-by:
Daniel Black <daniel@linux.ibm.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
-
Naoya Horiguchi authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 7ab660f8 ] debugfs_known_mountpoints[] is not used any more, so let's remove it. Link: http://lkml.kernel.org/r/1535102651-19418-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Naoya Horiguchi authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 90450656 ] Currently we get the following compiler warning: slabinfo.c:854:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (s->object_size < min_objsize) ^ due to the mismatch of signed/unsigned comparison. ->object_size and ->slab_size are never expected to be negative, so let's define them as unsigned int. [n-horiguchi@ah.jp.nec.com: convert everything - none of these can be negative] Link: http://lkml.kernel.org/r/20180826234947.GA9787@hori1.linux.bs1.fc.nec.co.jp Link: http://lkml.kernel.org/r/1535103134-20239-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by:
-
Emmanuel Grumbach authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit c6e57b38 ] When tracing is enabled, all the debug messages are recorded and must not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the user with: WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Workqueue: phy1 ieee80211_iface_work [mac80211] RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Call Trace: __sdata_dbg+0xbd/0x120 [mac80211] ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211] ieee80211_iface_work+0x21d/0x320 [mac80211] Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ilan Peer authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 0007e943 ] When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit f3ffb6c3 ] We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 8442938c ] The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we are truncating away the high bits. I noticed this bug because in commit 9cf0a0b4 ("cfg80211: Add support for 60GHz band channels 5 and 6") we made "freq <= 56160 + 2160 * 6" a valid requency when before it was only "freq <= 56160 + 2160 * 4" that was valid. It introduces a static checker warning: net/wireless/util.c:1571 ieee80211_chandef_to_operating_class() warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)' But really we probably shouldn't have been truncating the high bits away to begin with. Signed-off-by:
-
Jon Kuhn authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit c15e3f19 ] When a Mac client saves an item containing a backslash to a file server the backslash is represented in the CIFS/SMB protocol as as U+F026. Before this change, listing a directory containing an item with a backslash in its name will return that item with the backslash represented with a true backslash character (U+005C) because convert_sfm_character mapped U+F026 to U+005C when interpretting the CIFS/SMB protocol response. However, attempting to open or stat the path using a true backslash will result in an error because convert_to_sfm_char does not map U+005C back to U+F026 causing the CIFS/SMB request to be made with the backslash represented as U+005C. This change simply prevents the U+F026 to U+005C conversion from happenning. This is analogous to how the code does not do any translation of UNI_SLASH (U+F000). Signed-off-by:
Jon Kuhn <jkuhn@barracuda.com> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 16fe10cf ] The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 4c85609b ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: 6a62974b ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 38f5d8d8 ] This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: dd6fd4a3 ("i2c: uniphier: add UniPhier FIFO-less I2C driver") Signed-off-by:
-
Xiao Ni authored
BugLink: https://bugs.launchpad.net/bugs/1798770 [ Upstream commit 1d0ffd26 ] In raid10 reshape_request it gets max_sectors in read_balance. If the underlayer disks have bad blocks, the max_sectors is less than last. It will call goto read_more many times. It calls raise_barrier(conf, sectors_done != 0) every time. In this condition sectors_done is not 0. So the value passed to the argument force of raise_barrier is true. In raise_barrier it checks conf->barrier when force is true. If force is true and conf->barrier is 0, it panic. In this case reshape_request submits bio to under layer disks. And in the callback function of the bio it calls lower_barrier. If the bio finishes before calling raise_barrier again, it can trigger the BUG_ON. Add one pair of raise_barrier/lower_barrier to fix this bug. Signed-off-by:
Xiao Ni <xni@redhat.com> Suggested-by:
Neil Brown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
