- 03 Nov, 2008 2 commits
-
-
Steven Rostedt authored
Impact: ia64+tracing build fix When a function is kprobed, the return address is set to the kprobe_trampoline, or something similar. This caused the output of the trace to look confusing when the parent seemed to be this "kprobe_trampoline" function. To fix this, Abhishek Sagar added a test of the instruction pointer of the parent to see if it matched the kprobe_trampoline. If it did, the output would print a "[unknown/kretprobe'd]" instead. Unfortunately, not all archs do this the same way, and the trampoline function may not be exported, which causes failures in builds. This patch will compare the name instead of the pointer to see if it matches. This prevents us from depending on a function from being exported, and should work on all archs. The worst that can happen is that an arch might use a different name and then we go back to the confusing output. At least the arch will still build. Reported-by:
Abhishek Sagar <sagar.abhishek@gmail.com> Signed-off-by:
Steven Rostedt <srostedt@redhat.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Tested-by:
-
Al Viro authored
Impact: build fix on !stacktrace architectures only select STACKTRACE on architectures that have STACKTRACE_SUPPORT ... since we also need to ifdef out the guts of ftrace_trace_stack(). We also want to disallow setting TRACE_ITER_STACKTRACE in trace_flags on such configs, but that can wait. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Acked-by:
-
- 02 Nov, 2008 19 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide-gd: re-get capacity on revalidate tx4938ide: Avoid underflow on calculation of a wait cycle tx4938ide: Do not call devm_ioremap for whole 128KB tx4938ide: Check minimum cycle time and SHWT range (v2) ide: Switch to a common address ide-cd: fix DMA alignment regression
-
Borislav Petkov authored
We need to re-get a removable media's capacity when revalidating the disk so that its partitions get rescanned by the block layer. Signed-off-by:
Borislav Petkov <petkovbb@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: axboe@kernel.dk Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Atsushi Nemoto authored
Make 'wt' variable signed while it can be negative during calculation. Suggested-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: sshtylyov@ru.mvista.com Signed-off-by:
-
Atsushi Nemoto authored
Call devm_ioremap() for CS0 and CS1 separetely. And some style cleanups. Suggested-by:
-
Atsushi Nemoto authored
SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx release to address invalid hold time, so it actualy applies 4 times and so constitutes -DIOx recovery time. Check requirement of the recovery time and cycle time. Also check SHWT maximum value. Suggested-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Borislav Petkov authored
e5318b53 ("ide: use the dma safe check for REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading performance and ultimately causing an excessive amount of underruns. The issue is documented also in: http://bugzilla.kernel.org/show_bug.cgi?id=11742. Signed-off-by:
Valerio Passini <valerio.passini@unicam.it> [bart: fixup patch description per comments from Sergei Shtylyov] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix PCI resource mapping on sparc64 sparc64: Kill annoying warning when building compat_binfmt_elf.o sparc32: kernel/trace/trace.c wants DIE_OOPS sparc64: Fix __copy_{to,from}_user_inatomic defines.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) af_unix: netns: fix problem of return value IRDA: remove double inclusion of module.h udp: multicast packets need to check namespace net: add documentation for skb recycling key: fix setkey(8) policy set breakage bpa10x: free sk_buff with kfree_skb xfrm: do not leak ESRCH to user space net: Really remove all of LOOPBACK_TSO code. netfilter: nf_conntrack_proto_gre: switch to register_pernet_gen_subsys() netns: add register_pernet_gen_subsys/unregister_pernet_gen_subsys net: delete excess kernel-doc notation pppoe: Fix socket leak. gianfar: Don't reset TBI<->SerDes link if it's already up gianfar: Fix race in TBI/SerDes configuration at91_ether: request/free GPIO for PHY interrupt amd8111e: fix dma_free_coherent context atl1: fix vlan tag regression SMC91x: delete unused local variable "lp" myri10ge: fix stop/go mmio ordering bonding: fix panic when taking bond interface down before removing module ...
-
Jeff Garzik authored
s/user/used/ Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Max Dmitrichenko authored
There is a problem discovered in recent versions of ATI Mach64 driver in X.org on sparc64 architecture. In short, the driver fails to mmap MMIO aperture (PCI resource #2). I've found that kernel's __pci_mmap_make_offset() returns EINVAL. It checks whether user attempts to mmap more than the resource length, which is 0x1000 bytes in our case. But PAGE_SIZE on SPARC64 is 0x2000 and this is what actually is being mmaped. So __pci_mmap_make_offset() failed for this PCI resource. Signed-off-by:
Max Dmitrichenko <dmitrmax@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
GCC warns because some tests against 32-bit values never evaluate to true due to how TASK_SIZE is defined. I always wanted to mimick powerpc's definition of TASK_SIZE, which is simply TASK_SIZE_OF(current) and that also fixes the warning. Signed-off-by: -
Al Viro authored
Signed-off-by:
-
Hugh Dickins authored
Alexander Beregalov reports oops in __bzero() called from copy_from_user_fixup() called from iov_iter_copy_from_user_atomic(), when running dbench on tmpfs on sparc64: its __copy_from_user_inatomic and __copy_to_user_inatomic should be avoiding, not calling, the fixups. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Jianjun Kong authored
fix problem of return value net/unix/af_unix.c: unix_net_init() when error appears, it should return 'error', not always return 0. Signed-off-by:
Jianjun Kong <jianjun@zeuux.org> Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Current UDP multicast delivery is not namespace aware. Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Acked-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Stephen Hemminger authored
Commit 04a4bb55 ("net: add skb_recycle_check() to enable netdriver skb recycling") added a method for network drivers to recycle skbuffs, but while use of this mechanism was documented in the commit message, it should really have been added as a docbook comment as well -- this patch does that. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
-
- 01 Nov, 2008 16 commits
-
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
cirrusfb_zorro_unmap() may be called both from __devexit and (on cleanup path) from __devinit. So it needs to be a normal function, same as for cirrusfb_pci_unmap() Signed-off-by:
-
Al Viro authored
Insufficient dependency - we really want CONFIG_RTC_CLASS=y there. That will give us CONFIG_RTC_LIB=y, so the old dependency can be simply replaced. Signed-off-by:
-
Al Viro authored
We broke O_NONBLOCK handling in OSS dmasound_core in 2.3.11-pre3 - the original code copied f_flags to open_mode and then checked for O_NONBLOCK in there, but that got changed to copying f_mode and O_NONBLOCK has not reached that field in any kernel version. Since we do not care for any other bits, the fix is obvious... Signed-off-by:
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix AMDC1E and XTOPOLOGY conflict in cpufeature x86: build fix
-
Huang Weiyi authored
Removed duplicated #include <linux/delay.h> in init/do_mounts_md.c. The same compile error ("error: implicit declaration of function 'msleep'") got fixed twice: - f8b77d39 ("init/do_mounts_md.c: msleep compile fix") - 73b4a24f ("init/do_mounts_md.c must #include <linux/delay.h>") by people adding the <linux/delay.h> include in two slightly different places. Andrew's quilt scripts happily ignore the fuzz, and will re-apply the patch even though they had conflicts. Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Linus Torvalds authored
This makes the late e820 resources use 'insert_resource_expand_to_fit()' instead of doing a 'reserve_region_with_split()', and also avoids marking them as IORESOURCE_BUSY. This results in us being perfectly happy to use pre-existing PCI resources even if they were marked as being in a reserved region, while still avoiding any _new_ allocations in the reserved regions. It also makes for a simpler and more accurate resource tree. Example resource allocation from Jonathan Corbet, who has firmware that has an e820 reserved entry that covered a big range (e0000000-fed003ff), and that had various PCI resources in it set up by firmware. With old kernels, the reserved range would force us to re-allocate all pre-existing PCI resources, and his reserved range would end up looking like this: e0000000-fed003ff : reserved fec00000-fec00fff : IOAPIC 0 fed00000-fed003ff : HPET 0 where only the pre-allocated special regions (IOAPIC and HPET) were kept around. With 2.6.28-rc2, which uses 'reserve_region_with_split()', Jonathan's resource tree looked like this: e0000000-fe7fffff : reserved fe800000-fe8fffff : PCI Bus 0000:01 fe800000-fe8fffff : reserved fe900000-fe9d9aff : reserved fe9d9b00-fe9d9bff : 0000:00:1f.3 fe9d9b00-fe9d9bff : reserved fe9d9c00-fe9d9fff : 0000:00:1a.7 fe9d9c00-fe9d9fff : reserved fe9da000-fe9dafff : 0000:00:03.3 fe9da000-fe9dafff : reserved fe9db000-fe9dbfff : 0000:00:19.0 fe9db000-fe9dbfff : reserved fe9dc000-fe9dffff : 0000:00:1b.0 fe9dc000-fe9dffff : reserved fe9e0000-fe9fffff : 0000:00:19.0 fe9e0000-fe9fffff : reserved fea00000-fea7ffff : 0000:00:02.0 fea00000-fea7ffff : reserved fea80000-feafffff : 0000:00:02.1 fea80000-feafffff : reserved feb00000-febfffff : 0000:00:02.0 feb00000-febfffff : reserved fec00000-fed003ff : reserved fec00000-fec00fff : IOAPIC 0 fed00000-fed003ff : HPET 0 and because the reserved entry had been split and moved into the individual resources, and because it used the IORESOURCE_BUSY flag, the drivers that actually wanted to _use_ those resources couldn't actually attach to them: e1000e 0000:00:19.0: BAR 0: can't reserve mem region [0xfe9e0000-0xfe9fffff] HDA Intel 0000:00:1b.0: BAR 0: can't reserve mem region [0xfe9dc000-0xfe9dffff] with this patch, the resource tree instead becomes e0000000-fed003ff : reserved fe800000-fe8fffff : PCI Bus 0000:01 fe9d9b00-fe9d9bff : 0000:00:1f.3 fe9d9c00-fe9d9fff : 0000:00:1a.7 fe9d9c00-fe9d9fff : ehci_hcd fe9da000-fe9dafff : 0000:00:03.3 fe9db000-fe9dbfff : 0000:00:19.0 fe9db000-fe9dbfff : e1000e fe9dc000-fe9dffff : 0000:00:1b.0 fe9dc000-fe9dffff : ICH HD audio fe9e0000-fe9fffff : 0000:00:19.0 fe9e0000-fe9fffff : e1000e fea00000-fea7ffff : 0000:00:02.0 fea80000-feafffff : 0000:00:02.1 feb00000-febfffff : 0000:00:02.0 fec00000-fec00fff : IOAPIC 0 fed00000-fed003ff : HPET 0 ie the one reserved region now ends up surrounding all the PCI resources that were allocated inside of it by firmware, and because it is not marked BUSY, drivers have no problem attaching to the pre-allocated resources. Reported-and-tested-by:
Jonathan Corbet <corbet@lwn.net> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Robert Hancock <hancockr@shaw.ca> Signed-off-by:
-
Linus Torvalds authored
This one apparently doesn't generate any warnings, because the function is only used during system bootup, when the warnings are disabled. But it's still very wrong. The __reserve_region_with_split() function is called with the resource_lock held for writing, so it must only ever do GFP_ATOMIC allocations. Signed-off-by: -
git://www.jni.nu/crisLinus Torvalds authored
* 'link_removal' of git://www.jni.nu/cris: [CRIS] Remove links from CRIS build [CRIS] Merge asm-offsets.c for both arches into one file.
-
git://www.jni.nu/crisLinus Torvalds authored
* 'cris_move' of git://www.jni.nu/cris: [CRIS] Move header files from include to arch/cris/include. [CRISv32] Remove warning in io.h
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: SELinux: properly handle empty tty_files list
-
Huang Weiyi authored
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/leds/leds-hp-disk.c drivers/misc/panasonic-laptop.c This patch removes the said #include <version.h>. Signed-off-by:
-
Al Viro authored
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by:
-
Serge Hallyn authored
While Linux doesn't honor setuid on scripts. However, it mistakenly behaves differently for file capabilities. This patch fixes that behavior by making sure that get_file_caps() begins with empty bprm->caps_*. That way when a script is loaded, its bprm->caps_* may be filled when binfmt_misc calls prepare_binprm(), but they will be cleared again when binfmt_elf calls prepare_binprm() next to read the interpreter's file capabilities. Signed-off-by:
Serge Hallyn <serue@us.ibm.com> Acked-by:
David Howells <dhowells@redhat.com> Acked-by:
Andrew G. Morgan <morgan@kernel.org> Signed-off-by:
-
- 31 Oct, 2008 3 commits
-
-
Alexey Dobriyan authored
Steps to reproduce: #/usr/sbin/setkey -f flush; spdflush; add 192.168.0.42 192.168.0.1 ah 24500 -A hmac-md5 "1234567890123456"; add 192.168.0.42 192.168.0.1 esp 24501 -E 3des-cbc "123456789012123456789012"; spdadd 192.168.0.42 192.168.0.1 any -P out ipsec esp/transport//require ah/transport//require; setkey: invalid keymsg length Policy dump will bail out with the same message after that. -recv(4, "\2\16\0\0\32\0\3\0\0\0\0\0\37\r\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208 +recv(4, "\2\16\0\0\36\0\3\0\0\0\0\0H\t\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: NLM: Set address family before calling nlm_host_rebooted() nfsd: fix failure to set eof in readdir in some situations
-
Eric Paris authored
SELinux has wrongly (since 2004) had an incorrect test for an empty tty->tty_files list. With an empty list selinux would be pointing to part of the tty struct itself and would then proceed to dereference that value and again dereference that result. An F10 change to plymouth on a ppc64 system is actually currently triggering this bug. This patch uses list_empty() to handle empty lists rather than looking at a meaningless location. [note, this fixes the oops reported in https://bugzilla.redhat.com/show_bug.cgi?id=469079] Signed-off-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
James Morris <jmorris@namei.org>
-
