- 26 Jul, 2013 35 commits
-
-
Ezequiel Garcia authored
This commit adds an early check to vidioc_s_std() to detect if the new and current standards are equal, and exit with success in that case. This is needed to prevent userspace applications that might attempt to re-set the same standard from failing if that's done when streaming has started. Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Ezequiel Garcia authored
Remove the check as there's no reason to prevent the input from being set when the device is streaming. This allows surveillance applications (such as motion, zoneminder, etc.) to configure the input while streaming. Reported-by:
Sergey 'Jin' Bostandzhyan <jin@mediatomb.cc> Signed-off-by:
-
Wei Yongjun authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Vladimir Barinov authored
ML86V7667 always transmits top field first for both PAL and NTSC -- that makes application incorrectly treat interlaced fields when relying on the standard. Hence we must set V4L2_FIELD_INTERLACED_TB format explicitly. [Sergei: added a comment.] Reported-by:
Katsuya MATSUBARA <matsu@igel.co.jp> Signed-off-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by:
-
Lubomir Rintel authored
Alongside already existing Composite input. Signed-off-by:
-
Alexey Khoroshilov authored
check_firmware() makes sure firmware is in a device. It returns zero on success and error code otherwise. Also it sets down_firmware flag to 1 if downloading occurs. The only caller poseidon_probe() checks down_firmware flag and returns 0 without any initialization if it is set. That looks very strange, so the patch removes down_firmware argument of check_firmware() and returns error code if check_firmware() fails in poseidon_probe(). Not tested on real hardware. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Alexey Khoroshilov authored
All poseidon init functions properly return error codes, but they are ignored by poseidon_probe(). The patch implements handling of error cases. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Libo Chen authored
use module_pci_driver instead of init/exit, make code clean Signed-off-by:
Libo Chen <libo.chen@huawei.com> Acked-by:
-
Libin Yang authored
This patch switchs to resource managed allocation and request in mmp-driver. It can remove free resource operations. Signed-off-by:
Albert Wang <twang13@marvell.com> Signed-off-by:
Libin Yang <lbyang@marvell.com> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Libin Yang authored
This patch adds the SOFx/EOFx pair check for marvell-ccic. When switching format, the last EOF may not arrive when stop streamning. And the EOF will be detected in the next start streaming. Must ensure clear the left over frame flags before every really start streaming. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Libin Yang authored
This patch adds some planar formats support for marvell-ccic. Signed-off-by:
-
Libin Yang authored
This patch refines mcam_set_contig_buffer() in mcam core. It can remove redundant code line and enhance readability. Signed-off-by:
-
Libin Yang authored
This patch adds the reset ccic phy operation when stop streaming. Stop streaming without reset ccic phy, the next start streaming may be unstable. Also need add CCIC2 definition when PXA688/PXA2128 support dual ccics. Signed-off-by:
-
Libin Yang authored
This patch adds the clock tree support for marvell-ccic. Signed-off-by:
-
Libin Yang authored
This patch adds the MIPI support for marvell-ccic. Board driver should determine whether using MIPI or not. Signed-off-by:
-
Lad, Prabhakar authored
add OF support for the adv7343 driver. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
This patch makes the platform data members as array wherever possible, so as this makes easier while collecting the data in DT case and read the entire array at once. This patch also makes appropriate changes to board-da850-evm.c Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Lad, Prabhakar authored
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Lad, Prabhakar authored
Add support for asynchronous subdevice probing, using the v4l2-async API. The legacy synchronous mode is still supported too, which allows to gradually update drivers and platforms. Signed-off-by:
-
Lad, Prabhakar authored
Add support for asynchronous subdevice probing, using the v4l2-async API. The legacy synchronous mode is still supported too, which allows to gradually update drivers and platforms. Signed-off-by:
-
Lad, Prabhakar authored
Both synchronous and asynchronous tvp514x subdevice probing is supported by this patch. This patch also fixes the error path by calling media_entity_cleanup() on failure in probe when CONFIG_MEDIA_CONTROLLER is enabled. Signed-off-by:
-
Lad, Prabhakar authored
Both synchronous and asynchronous tvp7002 subdevice probing is supported by this patch. Signed-off-by:
-
Lad, Prabhakar authored
Both synchronous and asynchronous adv7343 subdevice probing is supported by this patch. Signed-off-by:
-
Lad, Prabhakar authored
add OF support for the ths8200 driver. Signed-off-by:
-
Lad, Prabhakar authored
This patch supports both synchronous and asynchronous ths8200 subdevice probing. Signed-off-by:
-
Philipp Zabel authored
Add a bitstream ringbuffer using kfifo. Queued source buffers are to be copied into the bitstream ringbuffer immediately and marked as done, if possible. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Philipp Zabel authored
This patch splits the global workbuf into a global tempbuf and a per-context workbuf, adds the codec mode aux register, and restores the work buffer pointer on commands. With the new firmware, there is only a single set of read/write pointers which need to be restored between context switches. This allows more than four active contexts at the same time. All auxiliary buffers are now allocated through a helper function to avoid code duplication. Signed-off-by:
-
Philipp Zabel authored
The encoder only ever needs two buffers, but we'll have to increase CODA_MAX_FRAMEBUFFERS for the decoder. Signed-off-by:
-
Philipp Zabel authored
This sets up IRAM areas used as temporary memory for the different hardware units depending on the frame size. Signed-off-by:
-
Philipp Zabel authored
As stated in the vb2_buffer documentation, drivers should not directly fill in v4l2_planes[0].bytesused, but should use the vb2_set_plane_payload() function instead. No functional changes. Signed-off-by:
-
Antti Palosaari authored
It is not allowed to build driver as a build-in when RC_CORE (remote controller support) is build as a module. randconfig build error with next-20130719, in drivers/media/usb drivers/built-in.o: In function `dvb_usbv2_disconnect': (.text+0x154b39): undefined reference to `rc_unregister_device' drivers/built-in.o: In function `dvb_usbv2_init_work': dvb_usb_core.c:(.text+0x155b2d): undefined reference to `rc_allocate_device' dvb_usb_core.c:(.text+0x155c38): undefined reference to `rc_register_device' dvb_usb_core.c:(.text+0x155c5b): undefined reference to `rc_free_device' drivers/built-in.o: In function `anysee_rc_query': anysee.c:(.text+0x157795): undefined reference to `rc_keydown' Reported-by:
Jim Davis <jim.epost@gmail.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Philipp Zabel authored
On mem2mem decoders with a hardware bitstream ringbuffer, to drain the buffer at the end of the stream, remaining frames might need to be decoded from the bitstream buffer without additional input buffers being provided. To achieve this, allow a queue to be marked as buffered by the driver, and allow scheduling of device_runs when buffered ready queues are empty. This also allows a driver to copy input buffers into their bitstream ringbuffer and immediately mark them as done to be dequeued. The motivation for this patch is hardware assisted h.264 reordering support in the coda driver. For high profile streams, the coda can hold back out-of-order frames, causing a few mem2mem device runs in the beginning, that don't produce any decompressed buffer at the v4l2 capture side. At the same time, the last few frames can be decoded from the bitstream with mem2mem device runs that don't need a new input buffer at the v4l2 output side. The decoder command ioctl can be used to put the decoder into the ringbuffer draining end-of-stream mode. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
- 22 Jul, 2013 1 commit
-
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
- 21 Jul, 2013 4 commits
-
-
Mauro Carvalho Chehab authored
Linux 3.11-rc2 * tag 'v3.11-rc2': (9535 commits) Linux 3.11-rc2 ext3: fix a BUG when opening a file with O_TMPFILE flag ext4: fix a BUG when opening a file with O_TMPFILE flag vfs: constify dentry parameter in d_count() livelock avoidance in sget() allow O_TMPFILE to work with O_WRONLY Btrfs: fix wrong write offset when replacing a device Btrfs: re-add root to dead root list if we stop dropping it Btrfs: fix lock leak when resuming snapshot deletion Btrfs: update drop progress before stopping snapshot dropping arm64: use common reboot infrastructure arm64: mm: don't treat user cache maintenance faults as writes arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler() arm64: Only enable local interrupts after the CPU is marked online MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION um: remove dead code um: siginfo cleanup MIPS: Octeon: Fix DT pruning bug with pip ports uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge cases um: Fix wait_stub_done() error handling ...
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI video support fixes from Rafael Wysocki: "I'm sending a separate pull request for this as it may be somewhat controversial. The breakage addressed here is not really new and the fixes may not satisfy all users of the affected systems, but we've had so much back and forth dance in this area over the last several weeks that I think it's time to actually make some progress. The source of the problem is that about a year ago we started to tell BIOSes that we're compatible with Windows 8, which we really need to do, because some systems shipping with Windows 8 are tested with it and nothing else, so if we tell their BIOSes that we aren't compatible with Windows 8, we expose our users to untested BIOS/AML code paths. However, as it turns out, some Windows 8-specific AML code paths are not tested either, because Windows 8 actually doesn't use the ACPI methods containing them, so if we declare Windows 8 compatibility and attempt to use those ACPI methods, things break. That occurs mostly in the backlight support area where in particular the _BCM and _BQC methods are plain unusable on some systems if the OS declares Windows 8 compatibility. [ The additional twist is that they actually become usable if the OS says it is not compatible with Windows 8, but that may cause problems to show up elsewhere ] Investigation carried out by Matthew Garrett indicates that what Windows 8 does about backlight is to leave backlight control up to individual graphics drivers. At least there's evidence that it does that if the Intel graphics driver is used, so we've decided to follow Windows 8 in that respect and allow i915 to control backlight (Daniel likes that part). The first commit from Aaron Lu makes ACPICA export the variable from which we can infer whether or not the BIOS believes that we are compatible with Windows 8. The second commit from Matthew Garrett prepares the ACPI video driver by making it initialize the ACPI backlight even if it is not going to be used afterward (that is needed for backlight control to work on Thinkpads). The third commit implements the actual workaround making i915 take over backlight control if the firmware thinks it's dealing with Windows 8 and is based on the work of multiple developers, including Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu. The final commit from Aaron Lu makes us follow Windows 8 by informing the firmware through the _DOS method that it should not carry out automatic brightness changes, so that brightness can be controlled by GUI. Hopefully, this approach will allow us to avoid using blacklists of systems that should not declare Windows 8 compatibility just to avoid backlight control problems in the future. - Change from Aaron Lu makes ACPICA export a variable which can be used by driver code to determine whether or not the BIOS believes that we are compatible with Windows 8. - Change from Matthew Garrett makes the ACPI video driver initialize the ACPI backlight even if it is not going to be used afterward (that is needed for backlight control to work on Thinkpads). - Fix from Rafael J Wysocki implements Windows 8 backlight support workaround making i915 take over bakclight control if the firmware thinks it's dealing with Windows 8. Based on the work of multiple developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu. - Fix from Aaron Lu makes the kernel follow Windows 8 by informing the firmware through the _DOS method that it should not carry out automatic brightness changes, so that brightness can be controlled by GUI" * tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: no automatic brightness changes by win8-compatible firmware ACPI / video / i915: No ACPI backlight if firmware expects Windows 8 ACPI / video: Always call acpi_video_init_brightness() on init ACPICA: expose OSI version -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext[34] tmpfile bugfix from Ted Ts'o: "Fix regression caused by commit af51a2ac which added ->tmpfile() support (along with a similar fix for ext3)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext3: fix a BUG when opening a file with O_TMPFILE flag ext4: fix a BUG when opening a file with O_TMPFILE flag
-
