The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use predefined macro offset_in_page() instead of (addr & ~PAGE_MASK).
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace pci_[alloc|free]_consistent occurences with
dma_[alloc|free]_coherent.

The Coccinelle semantic patch that was used to make some of these
changes is as follows:
@deprecated@
idexpression id;
position p;
@@

(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@bad1@
idexpression id;
position deprecated.p;
@@
...when != &id->dev
   when != pci_get_drvdata ( id )
   when != pci_enable_device ( id )
(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@depends on !bad1@
idexpression id;
expression direction;
position deprecated.p;
@@

(
- pci_dma_supported@p ( id,
+ dma_supported ( &id->dev,
...
+ , GFP_KERNEL
  )
|
- pci_alloc_consistent@p ( id,
+ dma_alloc_coherent ( &id->dev,
...
+ , GFP_KERNEL
  )
)

gsc_hpdi_auto_attach does not affect interrupt status but contains a
call to comedi_alloc_devpriv() which calls kzalloc with GFP_KERNEL flag.
Thus, there seems to be no danger that dma_alloc_coherent can be called
with interrupts turned off, and GFP_KERNEL can be used.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the checkpatch warning that else is not generally
useful after a break or return.

This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
         s
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Goto label was ambiguous change to out_free_page to signify that
we will always go through the path even on success.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Away label is ambiguous change to it err_destroy_channel to make it
clear this is an error path.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Timothy Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: Use usb_endpoint_dir_in(endpoint) instead of (endpoint->bEndpointAddress & USB_DIR_IN).

Use usb_endpoint_dir_in(endpoint) instead of (endpoint->bEndpointAddress & USB_DIR_IN) to check if the endpoint has IN direction.
This correction is based on following semantic patch,

@@
struct usb_endpoint_descriptor *endpoint;
expression E;
@@

(
- endpoint->bEndpointAddress & USB_DIR_IN
+ usb_endpoint_dir_in(endpoint)
|
- endpoint->bEndpointAddress == USB_DIR_IN
+ usb_endpoint_dir_in(endpoint)
|
- (endpoint->bEndpointAddress & E) == USB_DIR_IN
+ usb_endpoint_dir_in(endpoint)
)
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces list_entry with list_first_entry as it makes the
code more clear.
Done using coccinelle:

@@
expression e;
@@
(
- list_entry(e->next,
+ list_first_entry(e,
  ...)
|
- list_entry(e->prev,
+ list_last_entry(e,
  ...)
)
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace pr_err() calls with respective dev_err() counterpart.
Semantic patch used to detect and apply the transformation:

@r exists@
identifier f,s,i;
position p;
@@

f(...,struct s *i,...) {
  <+...
  pr_err@p(...)
  ...+>
}

@s@
identifier r.s, dev;
@@

struct s {
	...
	struct device dev;
	...
};

@t@
identifier r.i, s.dev;
expression fmt;
position r.p;
@@

- pr_err@p(
+ dev_err(&i->dev,
			fmt, ...);
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All devm functions has a device structure as the first argument which is
required by dev_{err,info,dbg} printing functions.
This patch converts pr_err to dev_err as dev_* is preferred after calls
to devm functions.

Done using coccinelle:

@r1 exists@
expression e,e1;
identifier f =~ "^devm_";
identifier g =~ "^pcim_";
identifier h =~ "^dmam_";
@@
e=\(f\|g\|h\)(e1,...);
<+...
(
- pr_info(
+ dev_info(e1,
   ...);
|
- pr_err(
+ dev_err(e1,
  ...);
|
- pr_debug(
+ dev_dbg(e1,
  ...);
)
...+>
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the smatch error:

drivers/staging/unisys/visorbus/visorchipset.c:2217 visorchipset_ioctl()
warn: user controlled 'adjustment' cast to postive rl = 's64min-s64max'

This is because we read a s64 and pass it to a function as u64.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove & from function name,when function name passed as an argument to another function.
Function name is used as pointer without &.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This a patch to card.c to remove unnecessary blank lines in order to
remove a checkpatch.pl warning.
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the following checkpatch.pl warnings:
Unnecessary parentheses around al7230_init_table_amode[0][0]
Unnecessary parentheses around al7230_channel_table2[0][0]
Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing the macro from functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing VNSvInPortB and nesting inside iowrite8.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

removing byOrgValue variable.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

removing macro from functions
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

removig macro from functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing the macro from functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All addressing is limited to 32 bits match this to all
functions and port out functions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing the need for variable ii.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing camel case and type prefix.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use memcpy_fromio to store data removing the need for local count.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing dwData variable altogether.

The reads are always 32 bit insize.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing byData variable altogether.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing camel case.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the case of lustre routers you only need a functioning
LNet stack. Especially since often the routers are very
light weight and want to avoid any addition software that
would create additional pressures on the system.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Include a help section for Kconfig LNET.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A few errors exist for the Kconfig option LNET_MAX_PAYLOAD. First
mistake is the default size is 1MB not 2MB as it is shown to the
person configuring the kernel. Second the LNET_MAX_PAYLOAD option
is more closely related to LNET than the LUSTRE_FS option.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The lustre file system has a layered architecture with
libcfs as the lowest layer and LNet layered on top. Then
on top of LNet we run the lustre client. This patch moves
the libcfs module code out of lustre into the lnet tree.
This fits into the long term goal of eventually merging
libcfs into LNet.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sometime ago a patch was submitted to duplicate the
proc_call_handler code in the LNet layer. This was
due to the thinking libcfs was not used by the LNet
layer. This was a wrong assumption so lets make LNet
use the lprocfs_call_handler from the libcfs layer.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>