- 13 Mar, 2018 40 commits
-
-
Linus Torvalds authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 966031f3 upstream. We added support for EXTPROC back in 2010 in commit 26df6d13 ("tty: Add EXTPROC support for LINEMODE") and the intent was to allow it to override some (all?) ICANON behavior. Quoting from that original commit message: There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. but the problem turns out that "several aspects of the terminal driver are disabled" is a bit ambiguous, and you can really confuse the n_tty layer by setting EXTPROC and then causing some of the ICANON invariants to no longer be maintained. This fixes at least one such case (TIOCINQ) becoming unhappy because of the confusion over whether ICANON really means ICANON when EXTPROC is set. This basically makes TIOCINQ match the case of read: if EXTPROC is set, we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC changes, not just if ICANON changes. Fixes: 26df6d13 ("tty: Add EXTPROC support for LINEMODE") Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by:
syzkaller <syzkaller@googlegroups.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Thomas Gleixner authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 322f8b8b upstream. smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector() invoke local_flush_tlb() for no obvious reason. Digging in history revealed that the original code in the 2.1 era added those because the code manipulated a swapper_pg_dir pagetable entry. The pagetable manipulation was removed long ago in the 2.3 timeframe, but the TLB flush invocations stayed around forever. Remove them along with the pointless pr_debug()s which come from the same 2.1 change. Reported-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Thomas Gleixner authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 5d62c183 upstream. The conditions in irq_exit() to invoke tick_nohz_irq_exit() which subsequently invokes tick_nohz_stop_sched_tick() are: if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu)) If need_resched() is not set, but a timer softirq is pending then this is an indication that the softirq code punted and delegated the execution to softirqd. need_resched() is not true because the current interrupted task takes precedence over softirqd. Invoking tick_nohz_irq_exit() in this case can cause an endless loop of timer interrupts because the timer wheel contains an expired timer, but softirqs are not yet executed. So it returns an immediate expiry request, which causes the timer to fire immediately again. Lather, rinse and repeat.... Prevent that by adding a check for a pending timer soft interrupt to the conditions in tick_nohz_stop_sched_tick() which avoid calling get_next_timer_interrupt(). That keeps the tick sched timer on the tick and prevents a repetitive programming of an already expired timer. Reported-by:
Sebastian Siewior <bigeasy@linutronix.d> Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanosSigned-off-by:
-
Daniel Thompson authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit da997066 upstream. When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 07b9f128 upstream. USB 3.1 devices are not detected as 3.1 capable since 4.15-rc3 due to a off by one in commit 81cf4a45 ("USB: core: Add type-specific length check of BOS descriptors") It uses USB_DT_USB_SSP_CAP_SIZE() to get SSP capability size which takes the zero based SSAC as argument, not the actual count of sublink speed attributes. USB3 spec 9.6.2.5 says "The number of Sublink Speed Attributes = SSAC + 1." The type-specific length check patch was added to stable and needs to be fixed there as well Fixes: 81cf4a45 ("USB: core: Add type-specific length check of BOS descriptors") CC: Masakazu Mokuno <masakazu.mokuno@gmail.com> Signed-off-by:
-
Oliver Neukum authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit b9096d9f upstream. This modem needs this quirk to operate. It produces timeouts when resumed without reset. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Dmitry Fleytman Dmitry Fleytman authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 7f038d25 upstream. Commit e0429362 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. There is one more model that has the same issue - C925e, so applying the same quirk as well. See aforementioned commit message for detailed explanation of the problem. Signed-off-by:
Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by:
-
SZ Lin (林上智) authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 3920bb71 upstream. This patch adds support for YUGA CLM920-NC5 PID 0x9625 USB modem to option driver. Interface layout: 0: QCDM/DIAG 1: ADB 2: MODEM 3: AT 4: RMNET Signed-off-by:
Taiyi Wu <taiyity.wu@moxa.com> Signed-off-by:
SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniele Palmas authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 08933099 upstream. This patch adds support for PID 0x1101 of Telit ME910. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Reinhard Speyerer authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 92a18a65 upstream. Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their serial ports T: Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=9091 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms but need sendsetup = true for the NMEA port to make it work properly. Simplify the patch compared to v1 as suggested by Bjørn Mork by taking advantage of the fact that existing devices work with sendsetup = true too. Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID 0x9090. Tests with several MC73xx/MC74xx/MC77xx devices have been performed in order to verify backward compatibility. Signed-off-by:
Reinhard Speyerer <rspmn@arcor.de> Signed-off-by:
-
Max Schulze authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit c6a36ad3 upstream. Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver. Signed-off-by:
Max Schulze <max.schulze@posteo.de> Signed-off-by:
-
Shuah Khan authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 8272d099 upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 248a2204 upstream. Remove and/or change debug, info. and error messages to not print kernel pointer addresses. Signed-off-by:
-
Juan Zea authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 544c4605 upstream. usbip bind writes commands followed by random string when writing to match_busid attribute in sysfs, caused by using full variable size instead of string length. Signed-off-by:
Juan Zea <juan.zea@qindel.com> Acked-by:
-
Willem de Bruijn authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit 35b99dff ] skb_complete_tx_timestamp must ingest the skb it is passed. Call kfree_skb if the skb cannot be enqueued. Fixes: b245be1f ("net-timestamp: no-payload only sysctl") Fixes: 9ac25fc0 ("net: fix socket refcounting in skb_complete_tx_timestamp()") Reported-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Grygorii Strashko authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit c1a8d0a3 ] Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719b ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit 84aeb437 ] The early call to br_stp_change_bridge_id in bridge's newlink can cause a memory leak if an error occurs during the newlink because the fdb entries are not cleaned up if a different lladdr was specified, also another minor issue is that it generates fdb notifications with ifindex = 0. Another unrelated memory leak is the bridge sysfs entries which get added on NETDEV_REGISTER event, but are not cleaned up in the newlink error path. To remove this special case the call to br_stp_change_bridge_id is done after netdev register and we cleanup the bridge on changelink error via br_dev_delete to plug all leaks. This patch makes netlink bridge destruction on newlink error the same as dellink and ioctl del which is necessary since at that point we have a fully initialized bridge device. To reproduce the issue: $ ip l add br0 address 00:11:22:33:44:55 type bridge group_fwd_mask 1 RTNETLINK answers: Invalid argument $ rmmod bridge [ 1822.142525] ============================================================================= [ 1822.143640] BUG bridge_fdb_cache (Tainted: G O ): Objects remaining in bridge_fdb_cache on __kmem_cache_shutdown() [ 1822.144821] ----------------------------------------------------------------------------- [ 1822.145990] Disabling lock debugging due to kernel taint [ 1822.146732] INFO: Slab 0x0000000092a844b2 objects=32 used=2 fp=0x00000000fef011b0 flags=0x1ffff8000000100 [ 1822.147700] CPU: 2 PID: 13584 Comm: rmmod Tainted: G B O 4.15.0-rc2+ #87 [ 1822.148578] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 1822.150008] Call Trace: [ 1822.150510] dump_stack+0x78/0xa9 [ 1822.151156] slab_err+0xb1/0xd3 [ 1822.151834] ? __kmalloc+0x1bb/0x1ce [ 1822.152546] __kmem_cache_shutdown+0x151/0x28b [ 1822.153395] shutdown_cache+0x13/0x144 [ 1822.154126] kmem_cache_destroy+0x1c0/0x1fb [ 1822.154669] SyS_delete_module+0x194/0x244 [ 1822.155199] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 1822.155773] entry_SYSCALL_64_fastpath+0x23/0x9a [ 1822.156343] RIP: 0033:0x7f929bd38b17 [ 1822.156859] RSP: 002b:00007ffd160e9a98 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 1822.157728] RAX: ffffffffffffffda RBX: 00005578316ba090 RCX: 00007f929bd38b17 [ 1822.158422] RDX: 00007f929bd9ec60 RSI: 0000000000000800 RDI: 00005578316ba0f0 [ 1822.159114] RBP: 0000000000000003 R08: 00007f929bff5f20 R09: 00007ffd160e8a11 [ 1822.159808] R10: 00007ffd160e9860 R11: 0000000000000202 R12: 00007ffd160e8a80 [ 1822.160513] R13: 0000000000000000 R14: 0000000000000000 R15: 00005578316ba090 [ 1822.161278] INFO: Object 0x000000007645de29 @offset=0 [ 1822.161666] INFO: Object 0x00000000d5df2ab5 @offset=128 Fixes: 30313a3d ("bridge: Handle IFLA_ADDRESS correctly when creating bridge device") Fixes: 5b8d5429 ("bridge: netlink: register netdevice before executing changelink") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Ido Schimmel authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit b4681c28 ] Since commit 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") the local table uses the same trie allocated for the main table when custom rules are not in use. When a net namespace is dismantled, the main table is flushed and freed (via an RCU callback) before the local table. In case the callback is invoked before the local table is iterated, a use-after-free can occur. Fix this by iterating over the FIB tables in reverse order, so that the main table is always freed after the local table. v3: Reworded comment according to Alex's suggestion. v2: Add a comment to make the fix more explicit per Dave's and Alex's feedback. Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Tonghao Zhang authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit 8cb38a60 ] The patch(180d8cd9) replaces all uses of struct sock fields' memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem to accessor macros. But the sockets_allocated field of sctp sock is not replaced at all. Then replace it now for unifying the code. Fixes: 180d8cd9 ("foundations of per-cgroup memory pressure controlling.") Cc: Glauber Costa <glommer@parallels.com> Signed-off-by:
Tonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by:
-
Tobias Jordan authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit 589bf32f ] add appropriate calls to clk_disable_unprepare() by jumping to out_mdio in case orion_mdio_probe() returns -EPROBE_DEFER. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3d604da1 ("net: mvmdio: get and enable optional clock") Signed-off-by:
Tobias Jordan <Tobias.Jordan@elektrobit.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Brian King authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit 748a240c ] This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Christoph Paasch authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit 30791ac4 ] The MD5-key that belongs to a connection is identified by the peer's IP-address. When we are in tcp_v4(6)_reqsk_send_ack(), we are replying to an incoming segment from tcp_check_req() that failed the seq-number checks. Thus, to find the correct key, we need to use the skb's saddr and not the daddr. This bug seems to have been there since quite a while, but probably got unnoticed because the consequences are not catastrophic. We will call tcp_v4_reqsk_send_ack only to send a challenge-ACK back to the peer, thus the connection doesn't really fail. Fixes: 9501f972 ("tcp md5sig: Let the caller pass appropriate key for tcp_v{4,6}_do_calc_md5_hash().") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Reviewed-by:
-
Shaohua Li authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit 513674b5 ] sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Sebastian Sjoholm authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit aceef61e ] Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem. The USB id is added to qmi_wwan.c to allow QMI communication with the EM7565. Signed-off-by:
Sebastian Sjoholm <ssjoholm@mac.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Kevin Cernekee authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit 93c64764 ] Currently, a nlmon link inside a child namespace can observe systemwide netlink activity. Filter the traffic so that nlmon can only sniff netlink messages from its own netns. Test case: vpnns -- bash -c "ip link add nlmon0 type nlmon; \ ip link set nlmon0 up; \ tcpdump -i nlmon0 -q -w /tmp/nlmon.pcap -U" & sudo ip xfrm state add src 10.1.1.1 dst 10.1.1.2 proto esp \ spi 0x1 mode transport \ auth sha1 0x6162633132330000000000000000000000000000 \ enc aes 0x00000000000000000000000000000000 grep --binary abc123 /tmp/nlmon.pcap Signed-off-by:
Kevin Cernekee <cernekee@chromium.org> Signed-off-by:
-
Kevin Cernekee authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit a46182b0 ] Closing a multicast socket after the final IPv4 address is deleted from an interface can generate a membership report that uses the source IP from a different interface. The following test script, run from an isolated netns, reproduces the issue: #!/bin/bash ip link add dummy0 type dummy ip link add dummy1 type dummy ip link set dummy0 up ip link set dummy1 up ip addr add 10.1.1.1/24 dev dummy0 ip addr add 192.168.99.99/24 dev dummy1 tcpdump -U -i dummy0 & socat EXEC:"sleep 2" \ UDP4-DATAGRAM:239.101.1.68:8889,ip-add-membership=239.0.1.68:10.1.1.1 & sleep 1 ip addr del 10.1.1.1/24 dev dummy0 sleep 5 kill %tcpdump RFC 3376 specifies that the report must be sent with a valid IP source address from the destination subnet, or from address 0.0.0.0. Add an extra check to make sure this is the case. Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit b9b312a7 ] syzkaller reported crashes in IPv6 stack [1] Xin Long found that lo MTU was set to silly values. IPv6 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in mld code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv6 minimal MTU. [1] skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801db307508 EFLAGS: 00010286 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540 FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:109 [inline] skb_put+0x181/0x1c0 net/core/skbuff.c:1694 add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695 add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817 mld_send_cr net/ipv6/mcast.c:1903 [inline] mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448 call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x29d/0xbb2 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1d3/0x210 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920 Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1745069 [ Upstream commit b5476022 ] IPv4 stack reacts to changes to small MTU, by disabling itself under RTNL. But there is a window where threads not using RTNL can see a wrong device mtu. This can lead to surprises, in igmp code where it is assumed the mtu is suitable. Fix this by reading device mtu once and checking IPv4 minimal MTU. This patch adds missing IPV4_MIN_MTU define, to not abuse ETH_MIN_MTU anymore. Signed-off-by:
-
Linus Torvalds authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 3ce120b1 upstream. It appears that hardened gentoo enables "-fstack-check" by default for gcc. That doesn't work _at_all_ for the kernel, because the kernel stack doesn't act like a user stack at all: it's much smaller, and it doesn't auto-expand on use. So the extra "probe one page below the stack" code generated by -fstack-check just breaks the kernel in horrible ways, causing infinite double faults etc. [ I have to say, that the particular code gcc generates looks very stupid even for user space where it works, but that's a separate issue. ] Reported-and-tested-by:
Alexander Tsoy <alexander@tsoy.me> Reported-and-tested-by:
Toralf Förster <toralf.foerster@gmx.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 924c6b90 upstream. Trying to reboot via real mode fails with PCID on: long mode cannot be exited while CR4.PCIDE is set. (No, I have no idea why, but the SDM and actual CPUs are in agreement here.) The result is a GPF and a hang instead of a reboot. I didn't catch this in testing because neither my computer nor my VM reboots this way. I can trigger it with reboot=bios, though. Fixes: 660da7c9 ("x86/mm: Enable CR4.PCIDE on supported systems") Reported-and-tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 0790c9aa upstream. The parameter is only present on x86_64 systems to save a few bytes, as PCID is always disabled on x86_32. Signed-off-by:
Nadav Amit <nadav.amit@gmail.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit ce4a4e56 upstream. The UP asm/tlbflush.h generates somewhat nicer code than the SMP version. Aside from that, it's fallen quite a bit behind the SMP code: - flush_tlb_mm_range() didn't flush individual pages if the range was small. - The lazy TLB code was much weaker. This usually wouldn't matter, but, if a kernel thread flushed its lazy "active_mm" more than once (due to reclaim or similar), it wouldn't be unlazied and would instead pointlessly flush repeatedly. - Tracepoints were missing. Aside from that, simply having the UP code around was a maintanence burden, since it means that any change to the TLB flush code had to make sure not to break it. Simplify everything by deleting the UP code. Signed-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit ca6c99c0 upstream. flush_tlb_page() was very similar to flush_tlb_mm_range() except that it had a couple of issues: - It was missing an smp_mb() in the case where current->active_mm != mm. (This is a longstanding bug reported by Nadav Amit) - It was missing tracepoints and vm counter updates. The only reason that I can see for keeping it at as a separate function is that it could avoid a few branches that flush_tlb_mm_range() needs to decide to flush just one page. This hardly seems worthwhile. If we decide we want to get rid of those branches again, a better way would be to introduce an __flush_tlb_mm_range() helper and make both flush_tlb_page() and flush_tlb_mm_range() use it. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/3cc3847cf888d8907577569b8bac3f01992ef8f9.1495492063.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit ce27374f upstream. I'm about to rewrite the function almost completely, but first I want to get a functional change out of the way. Currently, if flush_tlb_mm_range() does not flush the local TLB at all, it will never do individual page flushes on remote CPUs. This seems to be an accident, and preserving it will be awkward. Let's change it first so that any regressions in the rewrite will be easier to bisect and so that the rewrite can attempt to change no visible behavior at all. The fix is simple: we can simply avoid short-circuiting the calculation of base_pages_to_flush. As a side effect, this also eliminates a potential corner case: if tlb_single_page_flush_ceiling == TLB_FLUSH_ALL, flush_tlb_mm_range() could have ended up flushing the entire address space one page at a time. Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/4b29b771d9975aad7154c314534fec235618175a.1492844372.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 29961b59 upstream. I was trying to figure out what how flush_tlb_current_task() would possibly work correctly if current->mm != current->active_mm, but I realized I could spare myself the effort: it has no callers except the unused flush_tlb() macro. Signed-off-by:
-
Andy Lutomirski authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 9ccee237 upstream. mark_screen_rdonly() is the last remaining caller of flush_tlb(). flush_tlb_mm_range() is potentially faster and isn't obsolete. Compile-tested only because I don't know whether software that uses this mechanism even exists. Signed-off-by:
-
Hui Wang authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 285d5ddc upstream. It has the codec alc256, and add its pin definition to pin quirk table to let it apply ALC255_FIXUP_DELL1_MIC_NO_PRESENCE. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit a36c2638 upstream. Since the commit 97cc2ed2 ("ALSA: hda - Fix yet another i915 pointer leftover in error path") cleared hdac_acomp pointer, the WARN_ON() non-NULL check in snd_hdac_i915_register_notifier() may give a false-positive warning, as the function gets called no matter whether the component is registered or not. For fixing it, let's get rid of the spurious WARN_ON(). Fixes: 97cc2ed2 ("ALSA: hda - Fix yet another i915 pointer leftover in error path") Reported-by:
Kouta Okamoto <kouta.okamoto@toshiba.co.jp> Signed-off-by:
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 15f8c5f2 upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent codec node was also prematurely freed, while the child node was leaked. Fixes: 2d6d649a ("ASoC: twl4030: Support for DT booted kernel") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Maciej S. Szmigiero authored
BugLink: http://bugs.launchpad.net/bugs/1745069 commit 695b78b5 upstream. AC'97 ops (register read / write) need SSI regmap and clock, so they have to be set after them. We also need to set these ops back to NULL if we fail the probe. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
