We can reuse the unlock label above and need not repeat the same code.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock().
Let's rename inet6_destroy_sock() to inet6_cleanup_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit d38afeec ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

SCTP sets its own sk->sk_destruct() in the sctp_init_sock(), and
SCTPv6 socket reuses it as the init function.

To call inet6_sock_destruct() from SCTPv6 sk->sk_destruct(), we
set sctp_v6_destruct_sock() in a new init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit d38afeec ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

DCCP sets its own sk->sk_destruct() in the dccp_init_sock(), and
DCCPv6 socket shares it by calling the same init function via
dccp_v6_init_sock().

To call inet6_sock_destruct() from DCCPv6 sk->sk_destruct(), we
export it and set dccp_v6_sk_destruct() in the init function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit d38afeec ("tcp/udp: Call inet6_destroy_sock()
in IPv6 sk->sk_destruct()."), we call inet6_destroy_sock() in
sk->sk_destruct() by setting inet6_sock_destruct() to it to make
sure we do not leak inet6-specific resources.

Now we can remove unnecessary inet6_destroy_sock() calls in
sk->sk_prot->destroy().

DCCP and SCTP have their own sk->sk_destruct() function, so we
change them separately in the following patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ioana Ciornei says:

====================
net: dpaa2-eth: AF_XDP zero-copy support

This patch set adds support for AF_XDP zero-copy in the dpaa2-eth
driver. The support is available on the LX2160A SoC and its variants and
only on interfaces (DPNIs) with a maximum of 8 queues (HW limitations
are the root cause).

We are first implementing the .get_channels() callback since this a
dependency for further work.

Patches 2-3 are working on making the necessary changes for multiple
buffer pools on a single interface. By default, without an AF_XDP socket
attached, only a single buffer pool will be used and shared between all
the queues. The changes in the functions are made in this patch, but the
actual allocation and setup of a new BP is done in patch#10.

Patches 4-5 are improving the information exposed in debugfs. We are
exposing a new file to show which buffer pool is used by what channels
and how many buffers it currently has.

The 6th patch updates the dpni_set_pools() firmware API so that we are
capable of setting up a different buffer per queue in later patches.

In the 7th patch the generic dev_open/close APIs are used instead of the
dpaa2-eth internal ones.

Patches 8-9 are rearranging the existing code in dpaa2-eth.c in order to
create new functions which will be used in the XSK implementation in
dpaa2-xsk.c

Finally, the last 3 patches are adding the actual support for both the
Rx and Tx path of AF_XDP zero-copy and some associated tracepoints.
Details on the implementation can be found in the actual patch.

Changes in v2:
 - 3/12:  Export dpaa2_eth_allocate_dpbp/dpaa2_eth_free_dpbp in this
   patch to avoid a build warning. The functions will be used in next
   patches.
 - 6/12:  Use __le16 instead of u16 for the dpbp_id field.
 - 12/12: Use xdp_buff->data_hard_start when tracing the BP seeding.

Changes in v3:
 - 3/12: fix leaking of bp on error path
====================
Acked-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define the dpaa2_tx_xsk_fd and dpaa2_rx_xsk_fd trace events for the XSK
zero-copy Rx and Tx path.  Also, define the dpaa2_eth_buf as an event
class so that both dpaa2_eth_buf_seed and dpaa2_xsk_buf_seed traces can
derive from the same class.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support in dpaa2-eth for packet processing on the Tx path using
AF_XDP zero copy mode.

The newly added dpaa2_xsk_tx() function will handle enqueuing AF_XDP Tx
packets into the appropriate queue and update any necessary statistics.

On a more detailed note, the dpaa2_xsk_tx_build_fd() function handles
creating a Scatter-Gather frame descriptor with only one data buffer.
This is needed because otherwise we would need to impose a headroom in
the Tx buffer to store our software annotation structures.
This tactic is already used on the normal data path of the dpaa2-eth
driver, thus we are reusing the dpaa2_eth_sgt_get/dpaa2_eth_sgt_recycle
functions in order to allocate and recycle the Scatter-Gather table
buffers.

In case we have reached the maximum number of Tx XSK packets to be sent
in a NAPI cycle, we'll exit the dpaa2_eth_poll() and hope to be
rescheduled again.

On the XSK Tx confirmation path, we are just unmapping the SGT buffer
and recycle it for further use.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support for receiving packets via the AF_XDP
zero-copy mechanism in the dpaa2-eth driver. The support is available
only on the LX2160A SoC and variants because we are relying on the HW
capability to associate a buffer pool to a specific queue (QDBIN), only
available on newer WRIOP versions.

On the control path, the dpaa2_xsk_enable_pool() function is responsible
to allocate a buffer pool (BP), setup this new BP to be used only on the
requested queue and change the consume function to point to the XSK ZC
one.
We are forced to call dev_close() in order to change the queue to buffer
pool association (dpaa2_xsk_set_bp_per_qdbin) . This also works in our
favor since at dev_close() the buffer pools will be drained and at the
later dev_open() call they will be again seeded, this time with buffers
allocated from the XSK pool if needed.

On the data path, a new software annotation type is defined to be used
only for the XSK scenarios. This will enable us to pass keep necessary
information about a packet buffer between the moment in which it was
seeded and when it's received by the driver. In the XSK case, we are
keeping the associated xdp_buff.
Depending on the action returned by the BPF program, we will do the
following:
 - XDP_PASS: copy the contents of the packet into a brand new skb,
   recycle the initial buffer.
 - XDP_TX: just enqueue the same frame descriptor back into the Tx path,
   the buffer will get automatically released into the initial BP.
 - XDP_REDIRECT: call xdp_do_redirect() and exit.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Carve out code from the dpaa2_eth_rx() function in order to create and
export the dpaa2_eth_receive_skb() function. Do this in order to reuse
this code also from the XSK path which will be introduced in a later
patch.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dpaa2_eth_alloc_skb() function is added by moving code from the
dpaa2_eth_copybreak() previously defined function. What the new API does
is to allocate a new skb, copy the frame data from the passed FD to the
new skb and then return the skb.
Export this new function since we'll need the this functionality also
from the XSK code path.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of calling the internal functions which implement .ndo_stop and
.ndo_open, we can simply call dev_close and dev_open, so that we keep
the code cleaner.

Also, in the next patches we'll use the same APIs from other files
without needing to export the internal functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the dpni_set_pool() firmware API so that in the next patches we
can configure per Rx queue (per QDBIN) buffer pools.
This is a hard requirement of the AF_XDP, thus we need the newer API
version.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Export the allocated buffer pools, the number of buffers that they have
currently and which channels are using which BP.

The output looks like below:

Buffer pool info for eth2:
IDX        BPID      Buf count      CH#0      CH#1      CH#2      CH#3
BP#0         1           5124         x         x         x         x
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just give out an index for each channel that we export into the debug
file in the form of CH#<index>. This is purely to help corelate each
channel information from one debugfs file to another one.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows the configuration of multiple buffer pools associated
with a single DPNI object, each distinct DPBP object not necessarily
shared among all queues.
The user can interogate both the number of buffer pools and the buffer
count in each buffer pool by using the .get_ethtool_stats() callback.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rearrange the variables in the dpaa2_eth_get_ethtool_stats() function so
that we adhere to the reverse Christmas tree rule.
Also, in the next patch we are adding more variables and I didn't know
where to place them with the current ordering.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .get_channels() ethtool_ops callback is implemented and exports the
number of queues: Rx, Tx, Tx conf and Rx err.
The last two ones, Tx confirmation and Rx err, are counted as 'others'.

The .set_channels() callback is not implemented since the DPAA2
software/firmware architecture does not allow the dynamic
reconfiguration of the number of queues.
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document GPIO for HW reset.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an optional GPIO to be used for a hardware reset of the IC.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ff6d3658 ("soc: qcom: qmi: use const for struct
qmi_elem_info") allows QMI message encoding/decoding rules to be
const, so do that for IPA.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a matching flow spec exists its current location is as good
as ANY. If not add the new flow spec at the first available
location.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221019215123.316997-1-opendmb@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After commit 178ca044 ("sctp: Make sctp_enqueue_event tak an
skb list."), skb_list cannot be NULL.

Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20221019180735.161388-3-aleksei.kodanev@bell-sw.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After commit 013b96ec ("sctp: Pass sk_buff_head explicitly to
sctp_ulpq_tail_event().") there is one more unneeded check of
skb_list for NULL.

Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20221019180735.161388-2-aleksei.kodanev@bell-sw.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

'&asoc->ulpq' passed to sctp_ulpq_init() as the first argument,
then sctp_qlpq_init() initializes it and eventually returns the
address of the struct member back. Therefore, in this case, the
return pointer cannot be NULL.

Moreover, it seems sctp_ulpq_init() has always been used only in
sctp_association_init(), so there's really no need to return ulpq
anymore.

Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20221019180735.161388-1-aleksei.kodanev@bell-sw.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter.

  Current release - regressions:

   - revert "net: fix cpu_max_bits_warn() usage in
     netif_attrmask_next{,_and}"

   - revert "net: sched: fq_codel: remove redundant resource cleanup in
     fq_codel_init()"

   - dsa: uninitialized variable in dsa_slave_netdevice_event()

   - eth: sunhme: uninitialized variable in happy_meal_init()

  Current release - new code bugs:

   - eth: octeontx2: fix resource not freed after malloc

  Previous releases - regressions:

   - sched: fix return value of qdisc ingress handling on success

   - sched: fix race condition in qdisc_graft()

   - udp: update reuse->has_conns under reuseport_lock.

   - tls: strp: make sure the TCP skbs do not have overlapping data

   - hsr: avoid possible NULL deref in skb_clone()

   - tipc: fix an information leak in tipc_topsrv_kern_subscr

   - phylink: add mac_managed_pm in phylink_config structure

   - eth: i40e: fix DMA mappings leak

   - eth: hyperv: fix a RX-path warning

   - eth: mtk: fix memory leaks

  Previous releases - always broken:

   - sched: cake: fix null pointer access issue when cake_init() fails"

* tag 'net-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
  net: phy: dp83822: disable MDI crossover status change interrupt
  net: sched: fix race condition in qdisc_graft()
  net: hns: fix possible memory leak in hnae_ae_register()
  wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new()
  sfc: include vport_id in filter spec hash and equal()
  genetlink: fix kdoc warnings
  selftests: add selftest for chaining of tc ingress handling to egress
  net: Fix return value of qdisc ingress handling on success
  net: sched: sfb: fix null pointer access issue when sfb_init() fails
  Revert "net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()"
  net: sched: cake: fix null pointer access issue when cake_init() fails
  ethernet: marvell: octeontx2 Fix resource not freed after malloc
  netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements
  netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
  ionic: catch NULL pointer issue on reconfig
  net: hsr: avoid possible NULL deref in skb_clone()
  bnxt_en: fix memory leak in bnxt_nvm_test()
  ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed
  udp: Update reuse->has_conns under reuseport_lock.
  net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable()
  ...

Pull ata fixes from Damien Le Moal:
 "Several minor fixes:

   - Fix the module alias for the ahci_imx driver to get autoloading to
     work (Alexander)

   - Fix a potential array-index-out-of-bounds problem with the
     enclosure managment support in the ahci driver (Kai-Heng)

   - Several patches to fix compilation warnings thrown by clang in the
     ahci_st, sata_rcar, ahci_brcm, ahci_xgene, ahci_imx and ahci_qoriq
     drivers (me)"

* tag 'ata-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci_qoriq: Fix compilation warning
  ata: ahci_imx: Fix compilation warning
  ata: ahci_xgene: Fix compilation warning
  ata: ahci_brcm: Fix compilation warning
  ata: sata_rcar: Fix compilation warning
  ata: ahci_st: Fix compilation warning
  ata: ahci: Match EM_MAX_SLOTS with SATA_PMP_MAX_PORTS
  ata: ahci-imx: Fix MODULE_ALIAS

Merge tag 'for-6.1/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Fix dm-bufio to use test_bit_acquire to properly test_bit on arches
   with weaker memory ordering.

 - DM core replace DMWARN with DMERR or DMCRIT for fatal errors.

 - Enable WQ_HIGHPRI on DM verity target's verify_wq.

 - Add documentation for DM verity's try_verify_in_tasklet option.

 - Various typo and redundant word fixes in code and/or comments.

* tag 'for-6.1/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm clone: Fix typo in block_device format specifier
  dm: remove unnecessary assignment statement in alloc_dev()
  dm verity: Add documentation for try_verify_in_tasklet option
  dm cache: delete the redundant word 'each' in comment
  dm raid: fix typo in analyse_superblocks code comment
  dm verity: enable WQ_HIGHPRI on verify_wq
  dm raid: delete the redundant word 'that' in comment
  dm: change from DMWARN to DMERR or DMCRIT for fatal errors
  dm bufio: use the acquire memory barrier when testing for B_READING

Instead of discovering the kmalloc bucket size _after_ allocation, round
up proactively so the allocation is explicitly made for the full size,
allowing the compiler to correctly reason about the resulting size of
the buffer through the existing __alloc_size() hint.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/lkml/4d75a9fd-1b94-7208-9de8-5a0102223e68@ieee.orgSigned-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221018092724.give.735-kees@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

If the cable is disconnected the PHY seems to toggle between MDI and
MDI-X modes. With the MDI crossover status interrupt active this causes
roughly 10 interrupts per second.

As the crossover status isn't checked by the driver, the interrupt can
be disabled to reduce the interrupt load.

Fixes: 87461f7a ("net: phy: DP83822 initial driver submission")
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We had one syzbot report [1] in syzbot queue for a while.
I was waiting for more occurrences and/or a repro but
Dmitry Vyukov spotted the issue right away.

<quoting Dmitry>
qdisc_graft() drops reference to qdisc in notify_and_destroy
while it's still assigned to dev->qdisc
</quoting>

Indeed, RCU rules are clear when replacing a data structure.
The visible pointer (dev->qdisc in this case) must be updated
to the new object _before_ RCU grace period is started
(qdisc_put(old) in this case).

[1]
BUG: KASAN: use-after-free in __tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066
Read of size 4 at addr ffff88802065e038 by task syz-executor.4/21027

CPU: 0 PID: 21027 Comm: syz-executor.4 Not tainted 6.0.0-rc3-syzkaller-00363-g7726d4c3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__tcf_qdisc_find.part.0+0xa3a/0xac0 net/sched/cls_api.c:1066
__tcf_qdisc_find net/sched/cls_api.c:1051 [inline]
tc_new_tfilter+0x34f/0x2200 net/sched/cls_api.c:2018
rtnetlink_rcv_msg+0x955/0xca0 net/core/rtnetlink.c:6081
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5efaa89279
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5efbc31168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f5efab9bf80 RCX: 00007f5efaa89279
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005
RBP: 00007f5efaae32e9 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5efb0cfb1f R14: 00007f5efbc31300 R15: 0000000000022000
</TASK>

Allocated by task 21027:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:45 [inline]
set_alloc_info mm/kasan/common.c:437 [inline]
____kasan_kmalloc mm/kasan/common.c:516 [inline]
____kasan_kmalloc mm/kasan/common.c:475 [inline]
__kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:525
kmalloc_node include/linux/slab.h:623 [inline]
kzalloc_node include/linux/slab.h:744 [inline]
qdisc_alloc+0xb0/0xc50 net/sched/sch_generic.c:938
qdisc_create_dflt+0x71/0x4a0 net/sched/sch_generic.c:997
attach_one_default_qdisc net/sched/sch_generic.c:1152 [inline]
netdev_for_each_tx_queue include/linux/netdevice.h:2437 [inline]
attach_default_qdiscs net/sched/sch_generic.c:1170 [inline]
dev_activate+0x760/0xcd0 net/sched/sch_generic.c:1229
__dev_open+0x393/0x4d0 net/core/dev.c:1441
__dev_change_flags+0x583/0x750 net/core/dev.c:8556
rtnl_configure_link+0xee/0x240 net/core/rtnetlink.c:3189
rtnl_newlink_create net/core/rtnetlink.c:3371 [inline]
__rtnl_newlink+0x10b8/0x17e0 net/core/rtnetlink.c:3580
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593
rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 21020:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track+0x21/0x30 mm/kasan/common.c:45
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
____kasan_slab_free mm/kasan/common.c:367 [inline]
____kasan_slab_free+0x166/0x1c0 mm/kasan/common.c:329
kasan_slab_free include/linux/kasan.h:200 [inline]
slab_free_hook mm/slub.c:1754 [inline]
slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1780
slab_free mm/slub.c:3534 [inline]
kfree+0xe2/0x580 mm/slub.c:4562
rcu_do_batch kernel/rcu/tree.c:2245 [inline]
rcu_core+0x7b5/0x1890 kernel/rcu/tree.c:2505
__do_softirq+0x1d3/0x9c6 kernel/softirq.c:571

Last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
call_rcu+0x99/0x790 kernel/rcu/tree.c:2793
qdisc_put+0xcd/0xe0 net/sched/sch_generic.c:1083
notify_and_destroy net/sched/sch_api.c:1012 [inline]
qdisc_graft+0xeb1/0x1270 net/sched/sch_api.c:1084
tc_modify_qdisc+0xbb7/0x1a00 net/sched/sch_api.c:1671
rtnetlink_rcv_msg+0x43a/0xca0 net/core/rtnetlink.c:6090
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348
kvfree_call_rcu+0x74/0x940 kernel/rcu/tree.c:3322
neigh_destroy+0x431/0x630 net/core/neighbour.c:912
neigh_release include/net/neighbour.h:454 [inline]
neigh_cleanup_and_release+0x1f8/0x330 net/core/neighbour.c:103
neigh_del net/core/neighbour.c:225 [inline]
neigh_remove_one+0x37d/0x460 net/core/neighbour.c:246
neigh_forced_gc net/core/neighbour.c:276 [inline]
neigh_alloc net/core/neighbour.c:447 [inline]
___neigh_create+0x18b5/0x29a0 net/core/neighbour.c:642
ip6_finish_output2+0xfb8/0x1520 net/ipv6/ip6_output.c:125
__ip6_finish_output net/ipv6/ip6_output.c:195 [inline]
ip6_finish_output+0x690/0x1160 net/ipv6/ip6_output.c:206
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1ed/0x540 net/ipv6/ip6_output.c:227
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820
mld_send_cr net/ipv6/mcast.c:2121 [inline]
mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2653
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

The buggy address belongs to the object at ffff88802065e000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 56 bytes inside of
1024-byte region [ffff88802065e000, ffff88802065e400)

The buggy address belongs to the physical page:
page:ffffea0000819600 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20658
head:ffffea0000819600 order:3 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 0000000000000000 dead000000000001 ffff888011841dc0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3523, tgid 3523 (sshd), ts 41495190986, free_ts 41417713212
prep_new_page mm/page_alloc.c:2532 [inline]
get_page_from_freelist+0x109b/0x2ce0 mm/page_alloc.c:4283
__alloc_pages+0x1c7/0x510 mm/page_alloc.c:5515
alloc_pages+0x1a6/0x270 mm/mempolicy.c:2270
alloc_slab_page mm/slub.c:1824 [inline]
allocate_slab+0x27e/0x3d0 mm/slub.c:1969
new_slab mm/slub.c:2029 [inline]
___slab_alloc+0x7f1/0xe10 mm/slub.c:3031
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3118
slab_alloc_node mm/slub.c:3209 [inline]
__kmalloc_node_track_caller+0x2f2/0x380 mm/slub.c:4955
kmalloc_reserve net/core/skbuff.c:358 [inline]
__alloc_skb+0xd9/0x2f0 net/core/skbuff.c:430
alloc_skb_fclone include/linux/skbuff.h:1307 [inline]
tcp_stream_alloc_skb+0x38/0x580 net/ipv4/tcp.c:861
tcp_sendmsg_locked+0xc36/0x2f80 net/ipv4/tcp.c:1325
tcp_sendmsg+0x2b/0x40 net/ipv4/tcp.c:1483
inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
sock_write_iter+0x291/0x3d0 net/socket.c:1108
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:578
ksys_write+0x1e8/0x250 fs/read_write.c:631
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1449 [inline]
free_pcp_prepare+0x5e4/0xd20 mm/page_alloc.c:1499
free_unref_page_prepare mm/page_alloc.c:3380 [inline]
free_unref_page+0x19/0x4d0 mm/page_alloc.c:3476
__unfreeze_partials+0x17c/0x1a0 mm/slub.c:2548
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:447
kasan_slab_alloc include/linux/kasan.h:224 [inline]
slab_post_alloc_hook mm/slab.h:727 [inline]
slab_alloc_node mm/slub.c:3243 [inline]
slab_alloc mm/slub.c:3251 [inline]
__kmem_cache_alloc_lru mm/slub.c:3258 [inline]
kmem_cache_alloc+0x267/0x3b0 mm/slub.c:3268
kmem_cache_zalloc include/linux/slab.h:723 [inline]
alloc_buffer_head+0x20/0x140 fs/buffer.c:2974
alloc_page_buffers+0x280/0x790 fs/buffer.c:829
create_empty_buffers+0x2c/0xee0 fs/buffer.c:1558
ext4_block_write_begin+0x1004/0x1530 fs/ext4/inode.c:1074
ext4_da_write_begin+0x422/0xae0 fs/ext4/inode.c:2996
generic_perform_write+0x246/0x560 mm/filemap.c:3738
ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:270
ext4_file_write_iter+0x44a/0x1660 fs/ext4/file.c:679
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x9e9/0xdd0 fs/read_write.c:578

Fixes: af356afa ("net_sched: reintroduce dev->qdisc for use by sch_api")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221018203258.2793282-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Inject fault while probing module, if device_register() fails,
but the refcount of kobject is not decreased to 0, the name
allocated in dev_set_name() is leaked. Fix this by calling
put_device(), so that name can be freed in callback function
kobject_cleanup().

unreferenced object 0xffff00c01aba2100 (size 128):
  comm "systemd-udevd", pid 1259, jiffies 4294903284 (age 294.152s)
  hex dump (first 32 bytes):
    68 6e 61 65 30 00 00 00 18 21 ba 1a c0 00 ff ff  hnae0....!......
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000034783f26>] slab_post_alloc_hook+0xa0/0x3e0
    [<00000000748188f2>] __kmem_cache_alloc_node+0x164/0x2b0
    [<00000000ab0743e8>] __kmalloc_node_track_caller+0x6c/0x390
    [<000000006c0ffb13>] kvasprintf+0x8c/0x118
    [<00000000fa27bfe1>] kvasprintf_const+0x60/0xc8
    [<0000000083e10ed7>] kobject_set_name_vargs+0x3c/0xc0
    [<000000000b87affc>] dev_set_name+0x7c/0xa0
    [<000000003fd8fe26>] hnae_ae_register+0xcc/0x190 [hnae]
    [<00000000fe97edc9>] hns_dsaf_ae_init+0x9c/0x108 [hns_dsaf]
    [<00000000c36ff1eb>] hns_dsaf_probe+0x548/0x748 [hns_dsaf]

Fixes: 6fe6611f ("net: add Hisilicon Network Subsystem hnae framework support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221018122451.1749171-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Inject fault while probing module, if device_register() fails,
but the refcount of kobject is not decreased to 0, the name
allocated in dev_set_name() is leaked. Fix this by calling
put_device(), so that name can be freed in callback function
kobject_cleanup().

unreferenced object 0xffff88810152ad20 (size 8):
  comm "modprobe", pid 252, jiffies 4294849206 (age 22.713s)
  hex dump (first 8 bytes):
    68 77 73 69 6d 30 00 ff                          hwsim0..
  backtrace:
    [<000000009c3504ed>] __kmalloc_node_track_caller+0x44/0x1b0
    [<00000000c0228a5e>] kvasprintf+0xb5/0x140
    [<00000000cff8c21f>] kvasprintf_const+0x55/0x180
    [<0000000055a1e073>] kobject_set_name_vargs+0x56/0x150
    [<000000000a80b139>] dev_set_name+0xab/0xe0

Fixes: f36a111a ("wwan_hwsim: WWAN device simulator")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20221018131607.1901641-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Filters on different vports are qualified by different implicit MACs and/or
VLANs, so shouldn't be considered equal even if their other match fields
are identical.

Fixes: 7c460d9b ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10")
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Round up allocations with kmalloc_size_roundup() so that openvswitch's
use of ksize() is always accurate and no special handling of the memory
is needed by KASAN, UBSAN_BOUNDS, nor FORTIFY_SOURCE.

Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221018090628.never.537-kees@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Missing flowi uid field in nft_fib expression, from Guillaume Nault.
   This is broken since the creation of the fib expression.

2) Relax sanity check to fix bogus EINVAL error when deleting elements
   belonging set intervals. Broken since 6.0-rc.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements
  netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
====================

Link: https://lore.kernel.org/r/20221019065225.1006344-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Address a bunch of kdoc warnings:

include/net/genetlink.h:81: warning: Function parameter or member 'module' not described in 'genl_family'
include/net/genetlink.h:243: warning: expecting prototype for struct genl_info. Prototype was for struct genl_dumpit_info instead
include/net/genetlink.h:419: warning: Function parameter or member 'net' not described in 'genlmsg_unicast'
include/net/genetlink.h:438: warning: expecting prototype for gennlmsg_data(). Prototype was for genlmsg_data() instead
include/net/genetlink.h:244: warning: Function parameter or member 'op' not described in 'genl_dumpit_info'

Link: https://lore.kernel.org/r/20221018231310.1040482-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Edward Cree says:

====================
netlink: formatted extacks

Currently, netlink extacks can only carry fixed string messages, which
 is limiting when reporting failures in complex systems.  This series
 adds the ability to return printf-formatted messages, and uses it in
 the sfc driver's TC offload code.
Formatted extack messages are limited in length to a fixed buffer size,
 currently 80 characters.  If the message exceeds this, the full message
 will be logged (ratelimited) to the console and a truncated version
 returned over netlink.
There is no change to the netlink uAPI; only internal kernel changes
 are needed.
====================

Link: https://lore.kernel.org/r/cover.1666102698.git.ecree.xilinx@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It no longer does anything now that we're using formatted extacks instead.
So we can remove the driver's whole get/set priv_flags implementation.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>