From: Alan Cox <alan@redhat.com>

I think it might be a good thing if this was fixed to match 2.4
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

__init is only for functions
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Based on "eata_generic.h", this SCSI controller has 9 bytes of IO
space, not 8, so update request_region(), release_region(), and
n_io_port to use 9 instead of 8.

diffstat:=
 drivers/scsi/eata_pio.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

On Wed, 2004-05-19 at 05:38, Herbert Xu wrote:
> This is a resend of my patch that adds basic support for highmem
> on i386 to the advansys driver.  It has been tested in
> http://bugs.debian.org/245238.
>
> The maintainer email address listed in the MAINTAINERS file bounced
> so someone else will need to look at this.

I converted your patch to use the DMA-API.  This will be necessary to
use the EISA advansys boards---Of course, EISA won't work properly until
the entire driver is converted to the driverfs probing API, sigh, but
I'll get around to that eventually.

OK, and I couldn't resist getting rid of the stupid in_isr locking on
the done function.

Converted from original patch by Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

again, the init code could use some bigger rework, but let's stick to
the minimal fix until we have some testers.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

I'd love to rework the init sequence a bit more, but without beeing able
to actually test the driver I'd rather stick to the bulletproof fix.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Original patch from
http://marc.theaimsgroup.com/?l=linux-scsi&m=107428662718579&w=2
reworked to according to James' suggestion to handle NO_SENSE the same
as RECOVERED_ERROR.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

megaraid does sleep_on_timeout on a stack waitq - use msleep instead.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

On Sun, 23 May 2004, Christoph Hellwig wrote:
> The other thing is that most calls to dc390_findDCB could probably be
> replaced with stroing the pDCB in scsi_device->hostdata on slave_alloc,
> but that could aswell be done in an incremental patch.

Done in the attached patch. Tested as usual and a bit harder.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This patch has been floating around for ages, got reminded of it again
when looking at the debian kernel package.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Here is an updated version v2.26.00.009 of the 3ware 9000 SATA-RAID driver.

Changes in this release:
   - Convert driver to pci_driver format.
   - Remove proc interface, add sysfs attributes.
   - Return SCSI_MLQUEUE_HOST_BUSY when card status is busy.

Future versions may include:
   - PAE fix
   - 80 column wrap fixes
   - Remove more prototypes by re-ordering functions.
   - sysfs queue depth adjustment instead of module_param
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This patch improves some of the handling of PA-RISC tulip cards.

 - Introduce HAS_SWAPPED_SEEPROM and NEEDS_FAKE_MEDIA_TABLE
 - Only trigger this code on GSC machines.  The pure PCI machines don't
   have these cards.
 - Allow the chip_name to be overridden in tulip_init_one().
 - Fix some indentation.
 - Handle the output from tulip_read_eeprom() better.

> From: Ralf Baechle <ralf@linux-mips.org>
> Subject: [PATCH] Stop queue on close in hdlcdrv
> To: Jeff Garzik <garzik@gtf.org>
> Date: Tue, 4 May 2004 13:59:15 +0200
>
> The stop method of a driver should ensure queueing is stopped ...
>
> diff -u -r1.19 hdlcdrv.c
> --- suckage/drivers/net/hamradio/hdlcdrv.c 12 Apr 2004 20:23:32 -0000

the above means the following is needed for my drivers - please apply to 2.6:

i386 gets it implicitly from somewhere but some architectures don't.
Also move <asm/uaccess.h> down so we have asm after linux headers.

s2io_rem_nic() is marked __exit and is being referred to from .data.
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

drivers/net/ixgb/ixgb_main.c: In function `ixgb_intr':
drivers/net/ixgb/ixgb_main.c:1593: warning: unused variable `hw'
(catch by J. Cherry).

This happens because `hw' is only used when CONFIG_IXGB_NAPI is not set.
As `hw' is used only to have the code readable, we can use it for
!CONFIG_IXGB_NAPI too.
Signed-off-by: Andrew Morton <akpm@osdl.org>

into redhat.com:/spare/repo/net-drivers-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into nuts.davemloft.net:/disk1/BK/sparc-2.6

into kernel.bkbits.net:/home/davem/bluetooth-2.6

Some RTX Telecom based USB dongles offer SCO support, but their
implementation is broken. This patch disables the use of the ISOC
interface for these devices.

If no channel is specified for a RFCOMM server socket, it will search
for the next free one and automaticly bind to it.

Proposed by Stephen Crane <steve.crane@rococosoft.com>

If no PSM is specified for a L2CAP server socket, it will search
for the next free one and automaticly bind to it.

Proposed by Stephen Crane <steve.crane@rococosoft.com>

This patch allocates the next free protocol number for the upcoming
HIDP support.

This patch updates the address of the BlueZ project and changes
some wording of the help entries.

Since we are using Bitkeeper the CVS tags are useless. This patch
removes them and makes some whitespace cleanups.

With Linux 2.6 there is no need to keep the function exports in a
central file and thus the use of syms.c makes no real sense. Remove
it and add the EXPORT_SYMBOL calls to the functions they belong to.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

The timing calculations used by the PXA platforms did not always take
account of the timings handed to us by PCMCIA, and where it did, it
assumed IO timings for memory windows.

We fix this, and provide a generic function which calculates the
required timings (in nanoseconds) for IO, memory and attribute
windows.  The SOC drivers only have to convert this information to
whatever format the hardware requires to achieve at least these
timing parameters.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Some machines decided to initialise this element.  It's not necessary
since find_memend_and_nodes() initialises this itself.  However,
'end' is not required if we initialise high_memory in this function
rather than waiting until mem_init() is called.

From: Eugene Surovegin <ebs@ebshome.net>

Put back DECLARE_PCI_UNMAP_???  and friends accidentaly removed during DMA
API reorganization.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>