On Spectrum-2, Spectrum-3 and Spectrum-4 machines, request SW
responsibility for placement of the LAG table.

On Spectrum-1, some FW versions claim to support lag_mode field despite
quietly ignoring any settings made to that field. Thus refrain from
attempting to configure lag_mode on those systems at all.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In this patch, if the LAG mode is SW, allocate the LAG table and configure
SGCR to indicate where it was allocated.

We use the default "DDD" (for dynamic data duplication) layout of the LAG
table. In the DDD mode, the membership information for each LAG is copied
in 8 PGT entries. This is done for performance reasons. The LAG table then
needs to be allocated on an address aligned to 8. Deal with this by
moving the LAG init ahead so that the LAG table is allocated at address 0.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PGT blocks are allocated through the function
mlxsw_sp_pgt_mid_alloc_range(). The interface assumes that the caller knows
which piece of PGT exactly they want to get. That was fine while the FID
code was the only client allocating blocks of PGT. However for SW-allocated
LAG table, there will be an additional client: mlxsw_sp_lag_init(). The
interface should therefore be changed to not require particular
coordinates, but to take just the requested size, allocate the block
wherever, and give back the PGT address.

In this patch, change the interface accordingly. Initialize FID family's
pgt_base from the result of the PGT allocation (note that mlxsw makes a
copy of the family structure, so what gets initialized is not actually the
global structure). Drop the now-unnecessary pgt_base initializations and
the corresponding defines.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PGT blocks are allocated through the function
mlxsw_sp_pgt_mid_alloc_range(). The interface assumes that the caller knows
which piece of PGT exactly they want to get. That was fine while the FID
code was the only client allocating blocks of PGT. However for SW-allocated
LAG table, there will be an additional client: mlxsw_sp_lag_init(). The
interface should therefore be changed to not require particular
coordinates, but to take just the requested size, allocate the block
wherever, and give back the PGT address.

The current FID mode has one place where PGT address can be stored: the FID
family's pgt_base. The allocation scheme should therefore be changed from
allocating a block per FID flood table, to allocating a block per FID
family.

Do just that in this patch.

The per-family allocation is going to be useful for another related feature
as well: the CFF mode.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add to struct mlxsw_config_profile a field lag_mode_prefer_sw for the
driver to indicate that SW LAG mode should be configured if possible. Add
to the PCI module code to set lag_mode as appropriate.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lag_mode describes where the responsibility for LAG table placement lies:
SW or FW. The bus module determines whether LAG is supported, can configure
it if it is, and knows what (if any) configuration has been applied.
Therefore add a bus callback to determine the configured LAG mode. Also add
to core an API to query it.

The LAG mode is for now kept at the default value of 0 for FW-managed. The
code to actually toggle it will be added later.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add QUERY_FW.lag_mode_support, which determines whether
CONFIG_PROFILE.lag_mode is available.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add CONFIG_PROFILE.lag_mode, which serves for moving responsibility for
placement of the LAG table from FW to SW. Whether lag_mode should be
configured is determined by CONFIG_PROFILE.set_lag_mode, which also add.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A number of CONFIG_PROFILE fields' comments refer to a field named like
cmd_mbox_config_* instead of cmd_mbox_config_profile_*. Correct these
omissions.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add SGCR.lag_lookup_pgt_base, which is used for configuring the base
address of the LAG table within the PGT table for cases when the driver
is responsible for the table placement.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SGCR, Switch General Configuration Register, has not been used since commit
b0d80c01 ("mlxsw: Remove Mellanox SwitchX-2 ASIC support"). We will
need the register again shortly, so instead of dropping it and
reintroducing again, just drop the sole unused field.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
netlink: add variable-length / auto integers

Add netlink support for "common" / variable-length / auto integers
which are carried at the message level as either 4B or 8B depending
on the exact value. This saves space and will hopefully decrease
the number of instances where we realize that we needed more bits
after uAPI is set is stone. It also loosens the alignment requirements,
avoiding the need for padding.

This mini-series is a fuller version of the previous RFC:
https://lore.kernel.org/netdev/20121204.130914.1457976839967676240.davem@davemloft.net/
No user included here. I have tested (and will use) it
in the upcoming page pool API but the assumption is that
it will be widely applicable. So sending without a user.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Support uint / sint types in specs and YNL.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently push everyone to use padding to align 64b values
in netlink. Un-padded nla_put_u64() doesn't even exist any more.

The story behind this possibly start with this thread:
https://lore.kernel.org/netdev/20121204.130914.1457976839967676240.davem@davemloft.net/
where DaveM was concerned about the alignment of a structure
containing 64b stats. If user space tries to access such struct
directly:

	struct some_stats *stats = nla_data(attr);
	printf("A: %llu", stats->a);

lack of alignment may become problematic for some architectures.
These days we most often put every single member in a separate
attribute, meaning that the code above would use a helper like
nla_get_u64(), which can deal with alignment internally.
Even for arches which don't have good unaligned access - access
aligned to 4B should be pretty efficient.
Kernel and well known libraries deal with unaligned input already.

Padded 64b is quite space-inefficient (64b + pad means at worst 16B
per attr vs 32b which takes 8B). It is also more typing:

    if (nla_put_u64_pad(rsp, NETDEV_A_SOMETHING_SOMETHING,
                        value, NETDEV_A_SOMETHING_PAD))

Create a new attribute type which will use 32 bits at netlink
level if value is small enough (probably most of the time?),
and (4B-aligned) 64 bits otherwise. Kernel API is just:

    if (nla_put_uint(rsp, NETDEV_A_SOMETHING_SOMETHING, value))

Calling this new type "just" sint / uint with no specific size
will hopefully also make people more comfortable with using it.
Currently telling people "don't use u8, you may need the bits,
and netlink will round up to 4B, anyway" is the #1 comment
we give to newcomers.

In terms of netlink layout it looks like this:

         0       4       8       12      16
32b:     [nlattr][ u32  ]
64b:     [  pad ][nlattr][     u64      ]
uint(32) [nlattr][ u32  ]
uint(64) [nlattr][     u64      ]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

uint/sint support will add more logic to mnl_type(),
deduplicate it and make it more accessible.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Przemek Kitszel says:

====================
devlink: retain error in struct devlink_fmsg

Extend devlink fmsg to retain error (patch 1),
so drivers could omit error checks after devlink_fmsg_*() (patches 2-10),
and finally enforce future uses to follow this practice by change to
return void (patch 11)

Note that it was compile tested only.

bloat-o-meter for whole series:
add/remove: 8/18 grow/shrink: 23/40 up/down: 2017/-5833 (-3816)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since struct devlink_fmsg retains error by now (see 1st patch of this
series), there is no longer need to keep returning it in each call.

This is a separate commit to allow per-driver conversion to stop using
those return values.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop unneeded error checking.

devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop unneeded error checking.

devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop unneeded error checking.

devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop unneeded error checking.

devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop unneeded error checking.

devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop unneeded error checking.

devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop unneeded error checking.

devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop unneeded error checking.

devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop unneeded error checking.

devlink_fmsg_*() family of functions is now retaining errors,
so there is no need to check for them after each call.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Retain error value in struct devlink_fmsg, to relieve drivers from
checking it after each call.
Note that fmsg is an in-memory builder/buffer of formatted message,
so it's not the case that half baked message was sent somewhere.

We could find following scheme in multiple drivers:
  err = devlink_fmsg_obj_nest_start(fmsg);
  if (err)
  	return err;
  err = devlink_fmsg_string_pair_put(fmsg, "src", src);
  if (err)
  	return err;
  err = devlink_fmsg_something(fmsg, foo, bar);
  if (err)
	return err;
  // and so on...
  err = devlink_fmsg_obj_nest_end(fmsg);

With retaining error API that translates to:
  devlink_fmsg_obj_nest_start(fmsg);
  devlink_fmsg_string_pair_put(fmsg, "src", src);
  devlink_fmsg_something(fmsg, foo, bar);
  // and so on...
  devlink_fmsg_obj_nest_end(fmsg);

What means we check error just when is time to send.

Possible error scenarios are developer error (API misuse) and memory
exhaustion, both cases are good candidates to choose readability
over fastest possible exit.

Note that this patch keeps returning errors, to allow per-driver conversion
to the new API, but those are not needed at this point already.

This commit itself is an illustration of benefits for the dev-user,
more of it will be in separate commits of the series.
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tools: ynl-gen: support full range of min/max checks

YNL code gen currently supports only very simple range checks
within the range of s16. Add support for full range of u64 / s64
which is good to have, and will be even more important with uint / sint.
====================

Link: https://lore.kernel.org/r/20231018163917.2514503-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Support the use of symbolic names like s8-min or u32-max in checks
to make writing specs less painful.

Link: https://lore.kernel.org/r/20231018163917.2514503-4-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Extend the support to full range of min/max checks.
None of the existing YNL families required complex integer validation.

The support is less than trivial, because we try to keep struct nla_policy
tiny the min/max members it holds in place are s16. Meaning we can only
express checks in range of s16. For larger ranges we need to define
a structure and link it in the policy.

Link: https://lore.kernel.org/r/20231018163917.2514503-3-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For range validation we'll need to know if any individual
attribute is used on input (i.e. whether we will generate
a policy for it). Track this information.

Link: https://lore.kernel.org/r/20231018163917.2514503-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ida_alloc_max() function can return up to INT_MAX so this buffer is
not large enough.  Also use snprintf() for extra safety.

Fixes: 403376dd ("ptp: add debugfs interface to see applied channel masks")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/d4b1a995-a0cb-4125-aa1d-5fd5044aba1d@moroto.mountainSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

net/mac80211/key.c
  02e0e426 ("wifi: mac80211: fix error path key leak")
  2a8b665e ("wifi: mac80211: remove key_mtx")
  7d6904bf ("Merge wireless into wireless-next")
https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/

Adjacent changes:

drivers/net/ethernet/ti/Kconfig
  a602ee31 ("net: ethernet: ti: Fix mixed module-builtin object")
  98bdeae9 ("net: cpmac: remove driver to prepare for platform removal")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, netfilter, WiFi.

  Feels like an up-tick in regression fixes, mostly for older releases.
  The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
  fairly clear-cut user reported regressions. The mlx5 DMA bug was
  causing strife for 390x folks. The fixes themselves are not
  particularly scary, tho. No open investigations / outstanding reports
  at the time of writing.

  Current release - regressions:

   - eth: mlx5: perform DMA operations in the right locations, make
     devices usable on s390x, again

   - sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
     curve, previous fix of rejecting invalid config broke some scripts

   - rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock

   - revert "ethtool: Fix mod state of verbose no_mask bitset", needs
     more work

  Current release - new code bugs:

   - tcp: fix listen() warning with v4-mapped-v6 address

  Previous releases - regressions:

   - tcp: allow tcp_disconnect() again when threads are waiting, it was
     denied to plug a constant source of bugs but turns out .NET depends
     on it

   - eth: mlx5: fix double-free if buffer refill fails under OOM

   - revert "net: wwan: iosm: enable runtime pm support for 7560", it's
     causing regressions and the WWAN team at Intel disappeared

   - tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
     single skb, fix single-stream perf regression on some devices

  Previous releases - always broken:

   - Bluetooth:
      - fix issues in legacy BR/EDR PIN code pairing
      - correctly bounds check and pad HCI_MON_NEW_INDEX name

   - netfilter:
      - more fixes / follow ups for the large "commit protocol" rework,
        which went in as a fix to 6.5
      - fix null-derefs on netlink attrs which user may not pass in

   - tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
     Debian for keeping HZ=250 alive)

   - net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
     letting frankenstein UDP super-frames from getting into the stack

   - net: fix interface altnames when ifc moves to a new namespace

   - eth: qed: fix the size of the RX buffers

   - mptcp: avoid sending RST when closing the initial subflow"

* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
  Revert "ethtool: Fix mod state of verbose no_mask bitset"
  selftests: mptcp: join: no RST when rm subflow/addr
  mptcp: avoid sending RST when closing the initial subflow
  mptcp: more conservative check for zero probes
  tcp: check mptcp-level constraints for backlog coalescing
  selftests: mptcp: join: correctly check for no RST
  net: ti: icssg-prueth: Fix r30 CMDs bitmasks
  selftests: net: add very basic test for netdev names and namespaces
  net: move altnames together with the netdevice
  net: avoid UAF on deleted altname
  net: check for altname conflicts when changing netdev's netns
  net: fix ifname in netlink ntf during netns move
  net: ethernet: ti: Fix mixed module-builtin object
  net: phy: bcm7xxx: Add missing 16nm EPHY statistics
  ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
  tcp_bpf: properly release resources on error paths
  net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
  net: mdio-mux: fix C45 access returning -EIO after API change
  tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
  octeon_ep: update BQL sent bytes before ringing doorbell
  ...

Merge tag 'loongarch-fixes-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai ChenL
 "Fix 4-level pagetable building, disable WUC for pgprot_writecombine()
  like ioremap_wc(), use correct annotation for exception handlers, and
  a trivial cleanup"

* tag 'loongarch-fixes-6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Disable WUC for pgprot_writecombine() like ioremap_wc()
  LoongArch: Replace kmap_atomic() with kmap_local_page() in copy_user_highpage()
  LoongArch: Export symbol invalid_pud_table for modules building
  LoongArch: Use SYM_CODE_* to annotate exception handlers

Pull slab fix from Vlastimil Babka:

 - stable fix to prevent kernel warnings with KASAN_HW_TAGS on arm64
   due to improperly resolved kmalloc alignment restrictions (Catalin
   Marinas)

* tag 'slab-fixes-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm: slab: Do not create kmalloc caches smaller than arch_slab_minalign()

Pull seccomp fix from Kees Cook:

 - Fix seccomp_unotify perf benchmark for 32-bit (Jiri Slaby)

* tag 'seccomp-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  perf/benchmark: fix seccomp_unotify benchmark for 32-bit

Pull vfs fix from Christian Brauner:
 "An openat() call from io_uring triggering an audit call can apparently
  cause the refcount of struct filename to be incremented from multiple
  threads concurrently during async execution, triggering a refcount
  underflow and hitting a BUG_ON(). That bug has been lurking around
  since at least v5.16 apparently.

  Switch to an atomic counter to fix that. The underflow check is
  downgraded from a BUG_ON() to a WARN_ON_ONCE() but we could easily
  remove that check altogether tbh"

* tag 'v6.6-rc7.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  audit,io_uring: io_uring openat triggers audit reference count underflow

This reverts commit 108a36d0.

It was reported that this fix breaks the possibility to remove existing WoL
flags. For example:
~$ ethtool lan2
...
        Supports Wake-on: pg
        Wake-on: d
...
~$ ethtool -s lan2 wol gp
~$ ethtool lan2
...
        Wake-on: pg
...
~$ ethtool -s lan2 wol d
~$ ethtool lan2
...
        Wake-on: pg
...

This worked correctly before this commit because we were always updating
a zero bitmap (since commit 66991703 ("ethtool: fix application of
verbose no_mask bitset"), that is) so that the rest was left zero
naturally. But now the 1->0 change (old_val is true, bit not present in
netlink nest) no longer works.
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Closes: https://lore.kernel.org/netdev/20231019095140.l6fffnszraeb6iiw@lion.mk-sys.cz/
Cc: stable@vger.kernel.org
Fixes: 108a36d0 ("ethtool: Fix mod state of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/20231019-feature_ptp_bitset_fix-v1-1-70f3c429a221@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ntfs3 fixes from Konstantin Komarov:

 - memory leak

 - some logic errors, NULL dereferences

 - some code was refactored

 - more sanity checks

* tag 'ntfs3_for_6.6' of https://github.com/Paragon-Software-Group/linux-ntfs3:
  fs/ntfs3: Avoid possible memory leak
  fs/ntfs3: Fix directory element type detection
  fs/ntfs3: Fix possible null-pointer dereference in hdr_find_e()
  fs/ntfs3: Fix OOB read in ntfs_init_from_boot
  fs/ntfs3: fix panic about slab-out-of-bounds caused by ntfs_list_ea()
  fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()
  fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()
  fs/ntfs3: Do not allow to change label if volume is read-only
  fs/ntfs3: Add more info into /proc/fs/ntfs3/<dev>/volinfo
  fs/ntfs3: Refactoring and comments
  fs/ntfs3: Fix alternative boot searching
  fs/ntfs3: Allow repeated call to ntfs3_put_sbi
  fs/ntfs3: Use inode_set_ctime_to_ts instead of inode_set_ctime
  fs/ntfs3: Fix shift-out-of-bounds in ntfs_fill_super
  fs/ntfs3: fix deadlock in mark_as_free_ex
  fs/ntfs3: Add more attributes checks in mi_enum_attr()
  fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)
  fs/ntfs3: Write immediately updated ntfs state
  fs/ntfs3: Add ckeck in ni_update_parent()