Skip to content

L
linux
Switch branch/tag
  1. 05 Aug, 2021 2 commits
  3. 04 Aug, 2021 8 commits
  5. 03 Aug, 2021 10 commits
  7. 02 Aug, 2021 18 commits
    • Vladimir Oltean's avatar
      net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry · 0541a629
      Vladimir Oltean authored 
      Currently it is possible to add broken extern_learn FDB entries to the
bridge in two ways:

1. Entries pointing towards the bridge device that are not local/permanent:

ip link add br0 type bridge
bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static

2. Entries pointing towards the bridge device or towards a port that
are marked as local/permanent, however the bridge does not process the
'permanent' bit in any way, therefore they are recorded as though they
aren't permanent:

ip link add br0 type bridge
bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent

Since commit 52e4bec1 ("net: bridge: switchdev: treat local FDBs the
same as entries towards the bridge"), these incorrect FDB entries can
even trigger NULL pointer dereferences inside the kernel.

This is because that commit made the assumption that all FDB entries
that are not local/permanent have a valid destination port. For context,
local / permanent FDB entries either have fdb->dst == NULL, and these
point towards the bridge device and are therefore local and not to be
used for forwarding, or have fdb->dst == a net_bridge_port structure
(but are to be treated in the same way, i.e. not for forwarding).

That assumption _is_ correct as long as things are working correctly in
the bridge driver, i.e. we cannot logically have fdb->dst == NULL under
any circumstance for FDB entries that are not local. However, the
extern_learn code path where FDB entries are managed by a user space
controller show that it is possible for the bridge kernel driver to
misinterpret the NUD flags of an entry transmitted by user space, and
end up having fdb->dst == NULL while not being a local entry. This is
invalid and should be rejected.

Before, the two commands listed above both crashed the kernel in this
check from br_switchdev_fdb_notify:

	struct net_device *dev = info.is_local ? br->dev : dst->dev;

info.is_local == false, dst == NULL.

After this patch, the invalid entry added by the first command is
rejected:

ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static; ip link del br0
Error: bridge: FDB entry towards bridge must be permanent.

and the valid entry added by the second command is properly treated as a
local address and does not crash br_switchdev_fdb_notify anymore:

ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent; ip link del br0

Fixes: eb100e0e ("net: bridge: allow to add externally learned entries from user-space")
Reported-by: syzbot+9ba1174359adba5a5b7c@syzkaller.appspotmail.com
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: default avatarNikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210801231730.7493-1-vladimir.oltean@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      0541a629
    • Jakub Kicinski's avatar
      Revert "mhi: Fix networking tree build." · 1c69d7cf
      Jakub Kicinski authored 
      This reverts commit 40e15940.

Looks like this commit breaks the build for me.
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      1c69d7cf
    • Jakub Kicinski's avatar
      docs: operstates: document IF_OPER_TESTING · 7a7b8635
      Jakub Kicinski authored 
      IF_OPER_TESTING is in fact used today.
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7a7b8635
    • Jakub Kicinski's avatar
      docs: operstates: fix typo · 66e0da21
      Jakub Kicinski authored 
      TVL -> TLV
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      66e0da21
    • Jakub Kicinski's avatar
      net: sparx5: fix compiletime_assert for GCC 4.9 · 6387f65e
      Jakub Kicinski authored 
      Stephen reports sparx5 broke GCC 4.9 build.
Move the compiletime_assert() out of the static function.
Compile-tested only, no object code changes.
Reported-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support")
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6387f65e
    • Wang Hai's avatar
      net: natsemi: Fix missing pci_disable_device() in probe and remove · 7fe74dfd
      Wang Hai authored 
      Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: default avatarHulk Robot <hulkci@huawei.com>
Signed-off-by: default avatarWang Hai <wanghai38@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7fe74dfd
    • Steve Bennett's avatar
      net: phy: micrel: Fix detection of ksz87xx switch · a5e63c7d
      Steve Bennett authored 
      The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect
such that the that KSZ87XX switch is not identified correctly.

ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id
to discriminate whether it was called from ksz8051_match_phy_device()
or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the
same value as PHY_ID_KSZ8051, this doesn't work.

Instead use a bool to discriminate the caller.

Without this patch, the KSZ8795 switch port identifies as:

ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY]

With the patch, it identifies correctly:

ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch]

Fixes: 8b95599c ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs")
Signed-off-by: default avatarSteve Bennett <steveb@workware.net.au>
Reviewed-by: default avatarMarek Vasut <marex@denx.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a5e63c7d
    • David S. Miller's avatar
      Merge branch 'sja1105-fdb-fixes' · cebb5103
      David S. Miller authored 
      Vladimir Oltean says:

====================
FDB fixes for NXP SJA1105

I have some upcoming patches that make heavy use of statically installed
FDB entries, and when testing them on SJA1105P/Q/R/S and SJA1110, it
became clear that these switches do not behave reliably at all.

- On SJA1110, a static FDB entry cannot be installed at all
- On SJA1105P/Q/R/S, it is very picky about the inner/outer VLAN type
- Dynamically learned entries will make us not install static ones, or
  even if we do, they might not take effect

Patch 5/6 has a conflict with net-next (sorry), the commit message of
that patch describes how to deal with it. Thanks.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cebb5103
    • Vladimir Oltean's avatar
      net: dsa: sja1105: match FDB entries regardless of inner/outer VLAN tag · 47c2c0c2
      Vladimir Oltean authored 
      On SJA1105P/Q/R/S and SJA1110, the L2 Lookup Table entries contain a
maskable "inner/outer tag" bit which means:
- when set to 1: match single-outer and double tagged frames
- when set to 0: match untagged and single-inner tagged frames
- when masked off: match all frames regardless of the type of tag

This driver does not make any meaningful distinction between inner tags
(matches on TPID) and outer tags (matches on TPID2). In fact, all VLAN
table entries are installed as SJA1110_VLAN_D_TAG, which means that they
match on both inner and outer tags.

So it does not make sense that we install FDB entries with the IOTAG bit
set to 1.

In VLAN-unaware mode, we set both TPID and TPID2 to 0xdadb, so the
switch will see frames as outer-tagged or double-tagged (never inner).
So the FDB entries will match if IOTAG is set to 1.

In VLAN-aware mode, we set TPID to 0x8100 and TPID2 to 0x88a8. So the
switch will see untagged and 802.1Q-tagged packets as inner-tagged, and
802.1ad-tagged packets as outer-tagged. So untagged and 802.1Q-tagged
packets will not match FDB entries if IOTAG is set to 1, but 802.1ad
tagged packets will. Strange.

To fix this, simply mask off the IOTAG bit from FDB entries, and make
them match regardless of whether the VLAN tag is inner or outer.

Fixes: 1da73821 ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      47c2c0c2
    • Vladimir Oltean's avatar
      net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too · 589918df
      Vladimir Oltean authored 
      Similar but not quite the same with what was done in commit b11f0a4c
("net: dsa: sja1105: be stateless when installing FDB entries") for
SJA1105E/T, it is desirable to drop the priv->vlan_aware check and
simply go ahead and install FDB entries in the VLAN that was given by
the bridge.

As opposed to SJA1105E/T, in SJA1105P/Q/R/S and SJA1110, the FDB is a
maskable TCAM, and we are installing VLAN-unaware FDB entries with the
VLAN ID masked off. However, such FDB entries might completely obscure
VLAN-aware entries where the VLAN ID is included in the search mask,
because the switch looks up the FDB from left to right and picks the
first entry which results in a masked match. So it depends on whether
the bridge installs first the VLAN-unaware or the VLAN-aware FDB entries.

Anyway, if we had a VLAN-unaware FDB entry towards one set of DESTPORTS
and a VLAN-aware one towards other set of DESTPORTS, the result is that
the packets in VLAN-aware mode will be forwarded towards the DESTPORTS
specified by the VLAN-unaware entry.

To solve this, simply do not use the masked matching ability of the FDB
for VLAN ID, and always match precisely on it. In VLAN-unaware mode, we
configure the switch for shared VLAN learning, so the VLAN ID will be
ignored anyway during lookup, so it is redundant to mask it off in the
TCAM.

This patch conflicts with net-next commit 0fac6aa0 ("net: dsa: sja1105:
delete the best_effort_vlan_filtering mode") which changed this line:
	if (priv->vlan_state != SJA1105_VLAN_UNAWARE) {
into:
	if (priv->vlan_aware) {

When merging with net-next, the lines added by this patch should take
precedence in the conflict resolution (i.e. the "if" condition should be
deleted in both cases).

Fixes: 1da73821 ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      589918df
    • Vladimir Oltean's avatar
      net: dsa: sja1105: ignore the FDB entry for unknown multicast when adding a new address · 728db843
      Vladimir Oltean authored 
      Currently, when sja1105pqrs_fdb_add() is called for a host-joined IPv6
MDB entry such as 33:33:00:00:00:6a, the search for that address will
return the FDB entry for SJA1105_UNKNOWN_MULTICAST, which has a
destination MAC of 01:00:00:00:00:00 and a mask of 01:00:00:00:00:00.
It returns that entry because, well, it matches, in the sense that
unknown multicast is supposed by design to match it...

But the issue is that we then proceed to overwrite this entry with the
one for our precise host-joined multicast address, and the unknown
multicast entry is no longer there - unknown multicast is now flooded to
the same group of ports as broadcast, which does not look up the FDB.

To solve this problem, we should ignore searches that return the unknown
multicast address as the match, and treat them as "no match" which will
result in the entry being installed to hardware.

For this to work properly, we need to put the result of the FDB search
in a temporary variable in order to avoid overwriting the l2_lookup
entry we want to program. The l2_lookup entry returned by the search
might not have the same set of DESTPORTS and not even the same MACADDR
as the entry we're trying to add.

Fixes: 4d942354 ("net: dsa: sja1105: offload bridge port flags to device")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      728db843
    • Vladimir Oltean's avatar
      net: dsa: sja1105: invalidate dynamic FDB entries learned concurrently with statically added ones · 6c5fc159
      Vladimir Oltean authored 
      The procedure to add a static FDB entry in sja1105 is concurrent with
dynamic learning performed on all bridge ports and the CPU port.

The switch looks up the FDB from left to right, and also learns
dynamically from left to right, so it is possible that between the
moment when we pick up a free slot to install an FDB entry, another slot
to the left of that one becomes free due to an address ageing out, and
that other slot is then immediately used by the switch to learn
dynamically the same address as we're trying to add statically.

The result is that we succeeded to add our static FDB entry, but it is
being shadowed by a dynamic FDB entry to its left, and the switch will
behave as if our static FDB entry did not exist.

We cannot really prevent this from happening unless we make the entire
process to add a static FDB entry a huge critical section where address
learning is temporarily disabled on _all_ ports, and then re-enabled
according to the configuration done by sja1105_port_set_learning.
However, that is kind of disruptive for the operation of the network.

What we can do alternatively is to simply read back the FDB for dynamic
entries located before our newly added static one, and delete them.
This will guarantee that our static FDB entry is now operational. It
will still not guarantee that there aren't dynamic FDB entries to the
_right_ of that static FDB entry, but at least those entries will age
out by themselves since they aren't hit, and won't bother anyone.

Fixes: 291d1e72 ("net: dsa: sja1105: Add support for FDB and MDB management")
Fixes: 1da73821 ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6c5fc159
    • Vladimir Oltean's avatar
      net: dsa: sja1105: overwrite dynamic FDB entries with static ones in .port_fdb_add · e11e865b
      Vladimir Oltean authored 
      The SJA1105 switch family leaves it up to software to decide where
within the FDB to install a static entry, and to concatenate destination
ports for already existing entries (the FDB is also used for multicast
entries), it is not as simple as just saying "please add this entry".

This means we first need to search for an existing FDB entry before
adding a new one. The driver currently manages to fool itself into
thinking that if an FDB entry already exists, there is nothing to be
done. But that FDB entry might be dynamically learned, case in which it
should be replaced with a static entry, but instead it is left alone.

This patch checks the LOCKEDS ("locked/static") bit from found FDB
entries, and lets the code "goto skip_finding_an_index;" if the FDB
entry was not static. So we also need to move the place where we set
LOCKEDS = true, to cover the new case where a dynamic FDB entry existed
but was dynamic.

Fixes: 291d1e72 ("net: dsa: sja1105: Add support for FDB and MDB management")
Fixes: 1da73821 ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e11e865b
    • Vladimir Oltean's avatar
      net: dsa: sja1105: fix static FDB writes for SJA1110 · cb81698f
      Vladimir Oltean authored 
      The blamed commit made FDB access on SJA1110 functional only as far as
dumping the existing entries goes, but anything having to do with an
entry's index (adding, deleting) is still broken.

There are in fact 2 problems, all caused by improperly inheriting the
code from SJA1105P/Q/R/S:
- An entry size is SJA1110_SIZE_L2_LOOKUP_ENTRY (24) bytes and not
  SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY (20) bytes
- The "index" field within an FDB entry is at bits 10:1 for SJA1110 and
  not 15:6 as in SJA1105P/Q/R/S

This patch moves the packing function for the cmd->index outside of
sja1105pqrs_common_l2_lookup_cmd_packing() and into the device specific
functions sja1105pqrs_l2_lookup_cmd_packing and
sja1110_l2_lookup_cmd_packing.

Fixes: 74e7feff ("net: dsa: sja1105: fix dynamic access to L2 Address Lookup table for SJA1110")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cb81698f
    • David S. Miller's avatar
      mhi: Fix networking tree build. · 40e15940
      David S. Miller authored 
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      40e15940
    • Yannick Vignon's avatar
      net/sched: taprio: Fix init procedure · ebca25ea
      Yannick Vignon authored 
      Commit 13511704 ("net: taprio offload: enforce qdisc to netdev queue mapping")
resulted in duplicate entries in the qdisc hash.
While this did not impact the overall operation of the qdisc and taprio
code paths, it did result in an infinite loop when dumping the qdisc
properties, at least on one target (NXP LS1028 ARDB).
Removing the duplicate call to qdisc_hash_add() solves the problem.

Fixes: 13511704 ("net: taprio offload: enforce qdisc to netdev queue mapping")
Signed-off-by: default avatarYannick Vignon <yannick.vignon@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ebca25ea
    • Jakub Sitnicki's avatar
      net, gro: Set inner transport header offset in tcp/udp GRO hook · d51c5907
      Jakub Sitnicki authored 
      GSO expects inner transport header offset to be valid when
skb->encapsulation flag is set. GSO uses this value to calculate the length
of an individual segment of a GSO packet in skb_gso_transport_seglen().

However, tcp/udp gro_complete callbacks don't update the
skb->inner_transport_header when processing an encapsulated TCP/UDP
segment. As a result a GRO skb has ->inner_transport_header set to a value
carried over from earlier skb processing.

This can have mild to tragic consequences. From miscalculating the GSO
segment length to triggering a page fault [1], when trying to read TCP/UDP
header at an address past the skb->data page.

The latter scenario leads to an oops report like so:

  BUG: unable to handle page fault for address: ffff9fa7ec00d008
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 123f201067 P4D 123f201067 PUD 123f209067 PMD 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 44 PID: 0 Comm: swapper/44 Not tainted 5.4.53-cloudflare-2020.7.21 #1
  Hardware name: HYVE EDGE-METAL-GEN10/HS-1811DLite1, BIOS V2.15 02/21/2020
  RIP: 0010:skb_gso_transport_seglen+0x44/0xa0
  Code: c0 41 83 e0 11 f6 87 81 00 00 00 20 74 30 0f b7 87 aa 00 00 00 0f [...]
  RSP: 0018:ffffad8640bacbb8 EFLAGS: 00010202
  RAX: 000000000000feda RBX: ffff9fcc8d31bc00 RCX: ffff9fa7ec00cffc
  RDX: ffff9fa7ebffdec0 RSI: 000000000000feda RDI: 0000000000000122
  RBP: 00000000000005c4 R08: 0000000000000001 R09: 0000000000000000
  R10: ffff9fe588ae3800 R11: ffff9fe011fc92f0 R12: ffff9fcc8d31bc00
  R13: ffff9fe0119d4300 R14: 00000000000005c4 R15: ffff9fba57d70900
  FS:  0000000000000000(0000) GS:ffff9fe68df00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff9fa7ec00d008 CR3: 0000003e99b1c000 CR4: 0000000000340ee0
  Call Trace:
   <IRQ>
   skb_gso_validate_network_len+0x11/0x70
   __ip_finish_output+0x109/0x1c0
   ip_sublist_rcv_finish+0x57/0x70
   ip_sublist_rcv+0x2aa/0x2d0
   ? ip_rcv_finish_core.constprop.0+0x390/0x390
   ip_list_rcv+0x12b/0x14f
   __netif_receive_skb_list_core+0x2a9/0x2d0
   netif_receive_skb_list_internal+0x1b5/0x2e0
   napi_complete_done+0x93/0x140
   veth_poll+0xc0/0x19f [veth]
   ? mlx5e_napi_poll+0x221/0x610 [mlx5_core]
   net_rx_action+0x1f8/0x790
   __do_softirq+0xe1/0x2bf
   irq_exit+0x8e/0xc0
   do_IRQ+0x58/0xe0
   common_interrupt+0xf/0xf
   </IRQ>

The bug can be observed in a simple setup where we send IP/GRE/IP/TCP
packets into a netns over a veth pair. Inside the netns, packets are
forwarded to dummy device:

  trafgen -> [veth A]--[veth B] -forward-> [dummy]

For veth B to GRO aggregate packets on receive, it needs to have an XDP
program attached (for example, a trivial XDP_PASS). Additionally, for UDP,
we need to enable GSO_UDP_L4 feature on the device:

  ip netns exec A ethtool -K AB rx-udp-gro-forwarding on

The last component is an artificial delay to increase the chances of GRO
batching happening:

  ip netns exec A tc qdisc add dev AB root \
     netem delay 200us slot 5ms 10ms packets 2 bytes 64k

With such a setup in place, the bug can be observed by tracing the skb
outer and inner offsets when GSO skb is transmitted from the dummy device:

tcp:

FUNC              DEV   SKB_LEN  NH  TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output  dumB     2830 270 290   1 294 254     1383 (tcpv4,gre,)
                                                ^^^
udp:

FUNC              DEV   SKB_LEN  NH  TH ENC INH ITH GSO_SIZE GSO_TYPE
ip_finish_output  dumB     2818 270 290   1 294 254     1383 (gre,udp_l4,)
                                                ^^^

Fix it by updating the inner transport header offset in tcp/udp
gro_complete callbacks, similar to how {inet,ipv6}_gro_complete callbacks
update the inner network header offset, when skb->encapsulation flag is
set.

[1] https://lore.kernel.org/netdev/CAKxSbF01cLpZem2GFaUaifh0S-5WYViZemTicAg7FCHOnh6kug@mail.gmail.com/

Fixes: bf296b12 ("tcp: Add GRO support")
Fixes: f993bc25 ("net: core: handle encapsulation offloads when computing segment lengths")
Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.")
Reported-by: default avatarAlex Forster <aforster@cloudflare.com>
Signed-off-by: default avatarJakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d51c5907
    • Prabhakar Kushwaha's avatar
      qede: fix crash in rmmod qede while automatic debug collection · 1159e25c
      Prabhakar Kushwaha authored 
      A crash has been observed if rmmod is done while automatic debug
collection in progress. It is due to a race  condition between
both of them.

To fix stop the sp_task during unload to avoid running qede_sp_task
even if they are schedule during removal process.
Signed-off-by: default avatarAlok Prasad <palok@marvell.com>
Signed-off-by: default avatarShai Malin <smalin@marvell.com>
Signed-off-by: default avatarAriel Elior <aelior@marvell.com>
Signed-off-by: default avatarPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1159e25c
  9. 30 Jul, 2021 2 commits
    • Linus Torvalds's avatar
      Merge tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · c7d10223
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
  (mac80211) and netfilter trees.

  Current release - regressions:

   - mac80211: fix starting aggregation sessions on mesh interfaces

  Current release - new code bugs:

   - sctp: send pmtu probe only if packet loss in Search Complete state

   - bnxt_en: add missing periodic PHC overflow check

   - devlink: fix phys_port_name of virtual port and merge error

   - hns3: change the method of obtaining default ptp cycle

   - can: mcba_usb_start(): add missing urb->transfer_dma initialization

  Previous releases - regressions:

   - set true network header for ECN decapsulation

   - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
     LRO

   - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
     PHY

   - sctp: fix return value check in __sctp_rcv_asconf_lookup

  Previous releases - always broken:

   - bpf:
       - more spectre corner case fixes, introduce a BPF nospec
         instruction for mitigating Spectre v4
       - fix OOB read when printing XDP link fdinfo
       - sockmap: fix cleanup related races

   - mac80211: fix enabling 4-address mode on a sta vif after assoc

   - can:
       - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
       - j1939: j1939_session_deactivate(): clarify lifetime of session
         object, avoid UAF
       - fix number of identical memory leaks in USB drivers

   - tipc:
       - do not blindly write skb_shinfo frags when doing decryption
       - fix sleeping in tipc accept routine"

* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  gve: Update MAINTAINERS list
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
  bpf: Fix leakage due to insufficient speculative store bypass mitigation
  bpf: Introduce BPF nospec instruction for mitigating Spectre v4
  sis900: Fix missing pci_disable_device() in probe and remove
  net: let flow have same hash in two directions
  nfc: nfcsim: fix use after free during module unload
  tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
  sctp: fix return value check in __sctp_rcv_asconf_lookup
  nfc: s3fwrn5: fix undefined parameter values in dev_err()
  net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
  net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
  net/mlx5: Unload device upon firmware fatal error
  net/mlx5e: Fix page allocation failure for ptp-RQ over SF
  net/mlx5e: Fix page allocation failure for trap-RQ over SF
  ...
      c7d10223
    • Linus Torvalds's avatar
      Merge tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · e1dab4c0
      Linus Torvalds authored 
      Pull ACPI fixes from Rafael Wysocki:
 "These revert a recent IRQ resources handling modification that turned
  out to be problematic, fix suspend-to-idle handling on AMD platforms
  to take upcoming systems into account properly and fix the retrieval
  of the DPTF attributes of the PCH FIVR.

  Specifics:

   - Revert recent change of the ACPI IRQ resources handling that
     attempted to improve the ACPI IRQ override selection logic, but
     introduced serious regressions on some systems (Hui Wang).

   - Fix up quirks for AMD platforms in the suspend-to-idle support code
     so as to take upcoming systems using uPEP HID AMDI007 into account
     as appropriate (Mario Limonciello).

   - Fix the code retrieving DPTF attributes of the PCH FIVR so that it
     agrees on the return data type with the ACPI control method
     evaluated for this purpose (Srinivas Pandruvada)"

* tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Fix reading of attributes
  Revert "ACPI: resources: Add checks for ACPI IRQ override"
  ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007
      e1dab4c0
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7