- 17 May, 2016 9 commits
-
-
Jasem Mutlaq authored
[ Upstream commit 613ac23a ] Adding VID:PID for Straizona Focusers to cp210x driver. Signed-off-by:
Jasem Mutlaq <mutlaqja@ikarustech.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Mike Manning authored
[ Upstream commit 1d377f4d ] The Link ECU is an aftermarket ECU computer for vehicles that provides full tuning abilities as well as datalogging and displaying capabilities via the USB to Serial adapter built into the device. Signed-off-by:
Mike Manning <michael@bsch.com.au> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Laszlo Ersek authored
[ Upstream commit 630ba0cc ] The variable_matches() function can currently read "var_name[len]", for example when: - var_name[0] == 'a', - len == 1 - match_name points to the NUL-terminated string "ab". This function is supposed to accept "var_name" inputs that are not NUL-terminated (hence the "len" parameter"). Document the function, and access "var_name[*match]" only if "*match" is smaller than "len". Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Laszlo Ersek <lersek@redhat.com> Cc: Peter Jones <pjones@redhat.com> Cc: Matthew Garrett <mjg59@coreos.com> Cc: Jason Andryuk <jandryuk@gmail.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.10+ Link: http://thread.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/86906Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 07d2390e ] In certain probe conditions the interrupt came right after registering the handler causing a NULL pointer exception because of uninitialized waitqueue: $ udevadm trigger i2c-gpio i2c-gpio-1: using pins 143 (SDA) and 144 (SCL) i2c-gpio i2c-gpio-3: using pins 53 (SDA) and 52 (SCL) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = e8b38000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_i2s(+) i2c_gpio(+) snd_soc_idma snd_soc_s3c_dma snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore ac97_bus spi_s3c64xx pwm_samsung dwc2 exynos_adc phy_exynos_usb2 exynosdrm exynos_rng rng_core rtc_s3c CPU: 0 PID: 717 Comm: data-provider-m Not tainted 4.6.0-rc1-next-20160401-00011-g1b8d87473b9e-dirty #101 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) (...) (__wake_up_common) from [<c0379624>] (__wake_up+0x38/0x4c) (__wake_up) from [<c0a41d30>] (ak8975_irq_handler+0x28/0x30) (ak8975_irq_handler) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389c40>] (handle_edge_irq+0xf0/0x19c) (handle_edge_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c05ee360>] (exynos_eint_gpio_irq+0x50/0x68) (exynos_eint_gpio_irq) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389a70>] (handle_fasteoi_irq+0xb4/0x194) (handle_fasteoi_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c03860b4>] (__handle_domain_irq+0x5c/0xb4) (__handle_domain_irq) from [<c0301774>] (gic_handle_irq+0x54/0x94) (gic_handle_irq) from [<c030c910>] (__irq_usr+0x50/0x80) The bug was reproduced on exynos4412-trats2 (with a max77693 device also using i2c-gpio) after building max77693 as a module. Cc: <stable@vger.kernel.org> Fixes: 94a6d5cf ("iio:ak8975 Implement data ready interrupt handling") Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Jack Pham authored
[ Upstream commit dec8e8f6 ] Specifically for the case of reads that use the Extended Register Read Long command, a multi-byte read operation is broken up into 8-byte chunks. However the call to spmi_ext_register_readl() is incorrectly passing 'val_size', which if greater than 8 will always fail. The argument should instead be 'len'. Fixes: c9afbb05 ("regmap: spmi: support base and extended register spaces") Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 17dcc37e ] On some SOCs PORTS_IMPL register value is never programmed by the firmware and left at zero value. Which means that no sata ports are available for software. AHCI driver used to cope up with this by fabricating the port_map if the PORTS_IMPL register is read zero, but recent patch broke this workaround as zero value was valid for NVMe disks. This patch adds ports-implemented DT bindings as workaround for this issue in a way that DT can can override the PORTS_IMPL register in cases where the firmware did not program it already. Fixes: 566d1827 ("libata: disable forced PORTS_IMPL for >= AHCI 1.3") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 2fd0f46c ] In usecases where force_port_map is used saved_port_map is never set, resulting in not programming the PORTS_IMPL register as part of initial config. This patch fixes this by setting it to port_map even in case where force_port_map is used, making it more inline with other parts of the code. Fixes: 566d1827 ("libata: disable forced PORTS_IMPL for >= AHCI 1.3") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 3b672623 ] The buck9 regulator of S2MPS11 PMIC had incorrect vsel_mask (0xff instead of 0x1f) thus reading entire register as buck9's voltage. This effectively caused regulator core to interpret values as higher voltages than they were and then to set real voltage much lower than intended. The buck9 provides power to other regulators, including LDO13 and LDO19 which supply the MMC2 (SD card). On Odroid XU3/XU4 the lower voltage caused SD card detection errors on Odroid XU3/XU4: mmc1: card never left busy state mmc1: error -110 whilst initialising SD card During driver probe the regulator core was checking whether initial voltage matches the constraints. With incorrect vsel_mask of 0xff and default value of 0x50, the core interpreted this as 5 V which is outside of constraints (3-3.775 V). Then the regulator core was adjusting the voltage to match the constraints. With incorrect vsel_mask this new voltage mapped to a vere low voltage in the driver. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
-
Sugar Zhang authored
[ Upstream commit 653aa464 ] this patch corrects the interface adc/dac control register definition according to datasheet. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
-
- 13 May, 2016 3 commits
-
-
Sasha Levin authored
[ Upstream commit 9fc515bc ] IWL_INFO is not an error but still printed by default. "can't access the RSA semaphore it is write protected" seems worrisome but it is not really a problem. CC: <stable@vger.kernel.org> [4.1+] Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Sasha Levin authored
I have erroneously created a copy of said file when backporting a commit back to the tree, and have ended up commiting it. Remove it from the tree. Reported-by:
Jens Rottmann <Jens.Rottmann@adlinktech.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 522dc09c.. Tony writes: This upstream commit is causing an oops: d8f00cd6 ("usb: hub: do not clear BOS field during reset device") This patch has already been included in several -stable kernels. Here are the affected kernels: 4.5.0-rc4 (current git) 4.4.2 4.3.6 (currently in review) 4.1.18 3.18.27 3.14.61 How to reproduce the problem: Boot kernel with slub debugging enabled (otherwise memory corruption will cause random oopses later instead of immediately) Plug in USB 3.0 disk to xhci USB 3.0 port dd if=/dev/sdc of=/dev/null bs=65536 (where /dev/sdc is the USB 3.0 disk) Unplug USB cable while dd is still going Oops is immediate: Reported-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
-
- 11 May, 2016 1 commit
-
-
Sasha Levin authored
Signed-off-by:
-
- 10 May, 2016 17 commits
-
-
Tony Luck authored
[ Upstream commit ff15e95c ] In commit: eb1af3b7 ("Fix computation of channel address") I switched the "sck_way" variable from holding the log2 value read from the h/w to instead be the actual number. Unfortunately it is needed in log2 form when used to shift the address. Tested-by:
Patrick Geary <patrickg@supermicro.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Fixes: eb1af3b7 ("Fix computation of channel address") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jan Beulich authored
[ Upstream commit 103f6112 ] Huge pages are not normally available to PV guests. Not suppressing hugetlbfs use results in an endless loop of page faults when user mode code tries to access a hugetlbfs mapped area (since the hypervisor denies such PTEs to be created, but error indications can't be propagated out of xen_set_pte_at(), just like for various of its siblings), and - once killed in an oops like this: kernel BUG at .../fs/hugetlbfs/inode.c:428! invalid opcode: 0000 [#1] SMP ... RIP: e030:[<ffffffff811c333b>] [<ffffffff811c333b>] remove_inode_hugepages+0x25b/0x320 ... Call Trace: [<ffffffff811c3415>] hugetlbfs_evict_inode+0x15/0x40 [<ffffffff81167b3d>] evict+0xbd/0x1b0 [<ffffffff8116514a>] __dentry_kill+0x19a/0x1f0 [<ffffffff81165b0e>] dput+0x1fe/0x220 [<ffffffff81150535>] __fput+0x155/0x200 [<ffffffff81079fc0>] task_work_run+0x60/0xa0 [<ffffffff81063510>] do_exit+0x160/0x400 [<ffffffff810637eb>] do_group_exit+0x3b/0xa0 [<ffffffff8106e8bd>] get_signal+0x1ed/0x470 [<ffffffff8100f854>] do_signal+0x14/0x110 [<ffffffff810030e9>] prepare_exit_to_usermode+0xe9/0xf0 [<ffffffff814178a5>] retint_user+0x8/0x13 This is CVE-2016-3961 / XSA-174. Reported-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <JGross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: stable@vger.kernel.org Cc: xen-devel <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/57188ED802000078000E431C@prv-mh.provo.novell.comSigned-off-by:
-
Dominik Dingel authored
[ Upstream commit 7f9be775 ] On s390 we only can enable hugepages if the underlying hardware/hypervisor also does support this. Common code now would assume this to be signaled by setting HPAGE_SHIFT to 0. But on s390, where we only support one hugepage size, there is a link between HPAGE_SHIFT and pageblock_order. So instead of setting HPAGE_SHIFT to 0, we will implement the check for the hardware capability. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dominik Dingel authored
[ Upstream commit 2531c8cf ] s390 has a constant hugepage size, by setting HPAGE_SHIFT we also change e.g. the pageblock_order, which should be independent in respect to hugepage support. With this patch every architecture is free to define how to check for hugepage support. Signed-off-by:
-
Huacai Chen authored
[ Upstream commit 221004c6 ] Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: stable@vger.kernel.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Jérôme Glisse authored
[ Upstream commit b5dcec69 ] Allowing userptr bo which are basicly a list of page from some vma (so either anonymous page or file backed page) would lead to serious corruption of kernel structures and counters (because we overwrite the page->mapping field when mapping buffer). This will already block if the buffer was populated before anyone does try to mmap it because then TTM_PAGE_FLAG_SG would be set in in the ttm_tt flags. But that flag is check before ttm_tt_populate in the ttm vm fault handler. So to be safe just add a check to verify_access() callback. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Jérôme Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
cpaul@redhat.com authored
[ Upstream commit deba0a2a ] With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915] [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915] [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915] [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm] [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm] [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. CC: stable@vger.kernel.org Signed-off-by:
Lyude <cpaul@redhat.com> Reviewed-by:
David Airlie <airlied@linux.ie> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 67f3754b ] The commit [9bef72bd: ALSA: pcxhr: Use nonatomic PCM ops] converted to non-atomic PCM ops, but shamelessly with an unbalanced mutex locking, which leads to the hangup easily. Fix it. Fixes: 9bef72bd ('ALSA: pcxhr: Use nonatomic PCM ops') Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116441 Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 89e9e66b ] If userspace calls UNLOCK_PI unconditionally without trying the TID -> 0 transition in user space first then the user space value might not have the waiters bit set. This opens the following race: CPU0 CPU1 uval = get_user(futex) lock(hb) lock(hb) futex |= FUTEX_WAITERS .... unlock(hb) cmpxchg(futex, uval, newval) So the cmpxchg fails and returns -EINVAL to user space, which is wrong because the futex value is valid. To handle this (yes, yet another) corner case gracefully, check for a flag change and retry. [ tglx: Massaged changelog and slightly reworked implementation ] Fixes: ccf9e6a8 ("futex: Make unlock_pi more robust") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Darren Hart <dvhart@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1460723739-5195-1-git-send-email-bigeasy@linutronix.deSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Lu, Han authored
[ Upstream commit 9859a971 ] Add HD Audio Device PCI ID for the Intel Broxton-T platform. It is an HDA Intel PCH controller. Signed-off-by:
Lu, Han <han.lu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Lu, Han authored
[ Upstream commit c87693da ] Add HD Audio Device PCI ID for the Intel Broxton platform. It is an HDA Intel PCH controller. Signed-off-by:
-
Lars-Peter Clausen authored
[ Upstream commit 38740a5b ] When using asynchronous read or write operations on the USB endpoints the issuer of the IO request is notified by calling the ki_complete() callback of the submitted kiocb when the URB has been completed. Calling this ki_complete() callback will free kiocb. Make sure that the structure is no longer accessed beyond that point, otherwise undefined behaviour might occur. Fixes: 2e4c7553 ("usb: gadget: f_fs: add aio support") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit bfaddd9f ] This reverts commit e64c952e. ATPX is the ACPI method for controlling AMD PowerXpress laptops. There are flags to indicate which methods are supported. If the dGPU power down flag is not supported, the driver needs to implement the dGPU power down manually. We had previously always forced the driver to assume the ATPX dGPU power down was present, but this causes problems on boards where it is not, leading to GPU hangs when attempting to power down the dGPU. Manual dGPU power down is not currently supported in the Linux driver. Some laptops indicate that the ATPX dGPU power down method is not present, but it actually apparently is. I'm not sure if this is a bios bug and it should be set or if there is a reason it was unset and the method should not be used. This is not an issue on other OSes since both the ATPX and the manual driver power down methods are supported. This is apparently fairly widespread, so just revert for now. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=115321 https://bugzilla.kernel.org/show_bug.cgi?id=116581 https://bugzilla.kernel.org/show_bug.cgi?id=116251 Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
[ Upstream commit bcb31eba ] bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by:
-
Alex Deucher authored
[ Upstream commit a64663d9 ] bug: https://bugzilla.kernel.org/show_bug.cgi?id=115291Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 2b02ec79 ] Bug: https://bugs.freedesktop.org/show_bug.cgi?id=92260Signed-off-by:
-
Maxim Sheviakov authored
[ Upstream commit e7865479 ] Just adds the quirk for MSI R7 370 Armor 2X Bug: https://bugs.freedesktop.org/show_bug.cgi?id=91294Signed-off-by:
Maxim Sheviakov <mrader3940@yandex.ru> Signed-off-by:
-
- 08 May, 2016 10 commits
-
-
Anton Blanchard authored
[ Upstream commit beff8237 ] scan_features() updates cpu_user_features but not cpu_user_features2. Amongst other things, cpu_user_features2 contains the user TM feature bits which we must keep in sync with the kernel TM feature bit. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Anton Blanchard authored
[ Upstream commit 6997e57d ] The REAL_LE feature entry in the ibm_pa_feature struct is missing an MMU feature value, meaning all the remaining elements initialise the wrong values. This means instead of checking for byte 5, bit 0, we check for byte 0, bit 0, and then we incorrectly set the CPU feature bit as well as MMU feature bit 1 and CPU user feature bits 0 and 2 (5). Checking byte 0 bit 0 (IBM numbering), means we're looking at the "Memory Management Unit (MMU)" feature - ie. does the CPU have an MMU. In practice that bit is set on all platforms which have the property. This means we set CPU_FTR_REAL_LE always. In practice that seems not to matter because all the modern cpus which have this property also implement REAL_LE, and we've never needed to disable it. We're also incorrectly setting MMU feature bit 1, which is: #define MMU_FTR_TYPE_8xx 0x00000002 Luckily the only place that looks for MMU_FTR_TYPE_8xx is in Book3E code, which can't run on the same cpus as scan_features(). So this also doesn't matter in practice. Finally in the CPU user feature mask, we're setting bits 0 and 2. Bit 2 is not currently used, and bit 0 is: #define PPC_FEATURE_PPC_LE 0x00000001 Which says the CPU supports the old style "PPC Little Endian" mode. Again this should be harmless in practice as no 64-bit CPUs implement that mode. Fix the code by adding the missing initialisation of the MMU feature. Also add a comment marking CPU user feature bit 2 (0x4) as reserved. It would be unsafe to start using it as old kernels incorrectly set it. Fixes: 44ae3ab3 ("powerpc: Free up some CPU feature bits by moving out MMU-related features") Signed-off-by:
-
Bastien Nocera authored
[ Upstream commit afecb146 ] The Optiplex 9020m with Haswell-DT processor needs a quirk for the headset jack at the front of the machine to be able to use microphones. A quirk for this model was originally added in 31278997, but c77900e6 removed it in favour of a more generic version. Unfortunately, pin configurations can changed based on firmware/BIOS versions, and the generic version doesn't have any effect on newer versions of the machine/firmware anymore. With help from David Henningsson <diwic@ubuntu.com> Signed-off-by:
Bastien Nocera <hadess@hadess.net> Tested-by:
-
Ville Syrjälä authored
[ Upstream commit 31318a92 ] HSW still has the wake FIFO, so let's check it. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Deepak S <deepak.s@linux.intel.com> Fixes: 05a2fb15 ("drm/i915: Consolidate forcewake code") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460633942-24013-1-git-send-email-ville.syrjala@linux.intel.com Cc: stable@vger.kernel.org Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> (cherry picked from commit 3d7d0c85) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Tom Lendacky authored
[ Upstream commit f709b45e ] Prevent information from leaking to userspace by doing a memset to 0 of the export state structure before setting the structure values and copying it. This prevents un-initialized padding areas from being copied into the export area. Cc: <stable@vger.kernel.org> # 3.14.x- Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Xiaodong Liu authored
[ Upstream commit 0851561d ] In sha_complete_job, incorrect mcryptd_hash_request_ctx pointer is used when check and complete other jobs. If the memory of first completed req is freed, while still completing other jobs in the func, kernel will crash since NULL pointer is assigned to RIP. Cc: <stable@vger.kernel.org> Signed-off-by:
Xiaodong Liu <xiaodong.liu@intel.com> Acked-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Yingjoe Chen authored
[ Upstream commit 5fedbb92 ] The debounce time unit for gpio_chip.set_debounce is us but mtk_gpio_set_debounce regard it as ms. Fix this by correct debounce time array dbnc_arr so it can find correct debounce setting. Debounce time for first debounce setting is 500us, correct this as well. While I'm at it, also change the debounce time array name to "debounce_time" for readability. Cc: stable@vger.kernel.org Signed-off-by:
Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by:
Daniel Kurtz <djkurtz@chromium.org> Acked-by:
Hongzhou Yang <hongzhou.yang@mediatek.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 7403c515 ] This got lost somewhere along the way. This fixes audio not working until set_property was called. Noticed-by:
Hyungwon Hwang <hyungwon.hwang7@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Ivanov authored
[ Upstream commit 8f815cdd ] A non-privileged user can create a netlink socket with the same port_id as used by an existing open nl80211 netlink socket (e.g. as used by a hostapd process) with a different protocol number. Closing this socket will then lead to the notification going to nl80211's socket release notification handler, and possibly cause an action such as removing a virtual interface. Fix this issue by checking that the netlink protocol is NETLINK_GENERIC. Since generic netlink has no notifier chain of its own, we can't fix the problem more generically. Fixes: 026331c4 ("cfg80211/mac80211: allow registering for and sending action frames") Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Ivanov <dima@ubnt.com> [rewrite commit message] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Dmitry Ivanov authored
[ Upstream commit e2726020 ] All existing users of NETLINK_URELEASE use it to clean up resources that were previously allocated to a socket via some command. As a result, no users require getting this notification for unbound sockets. Sending it for unbound sockets, however, is a problem because any user (including unprivileged users) can create a socket that uses the same ID as an existing socket. Binding this new socket will fail, but if the NETLINK_URELEASE notification is generated for such sockets, the users thereof will be tricked into thinking the socket that they allocated the resources for is closed. In the nl80211 case, this will cause destruction of virtual interfaces that still belong to an existing hostapd process; this is the case that Dmitry noticed. In the NFC case, it will cause a poll abort. In the case of netlink log/queue it will cause them to stop reporting events, as if NFULNL_CFG_CMD_UNBIND/NFQNL_CFG_CMD_UNBIND had been called. Fix this problem by checking that the socket is bound before generating the NETLINK_URELEASE notification. Cc: stable@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
