- 19 Mar, 2019 40 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/message/fusion/mptbase.c: In function mptbase_reply : drivers/message/fusion/mptbase.c:643:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (event != MPI_EVENT_EVENT_CHANGE) ^ drivers/message/fusion/mptbase.c:646:2: note: here case MPI_FUNCTION_CONFIG: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
There are several statements and code blocks there are incorrectly indented. Fix these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
There are a few statements that are not indented correctly, so fix these. Also add empty line between variable declaration and first statements in functions. Also remove whitespace between * and mvi_dev to clean up a cppcheck warning. Signed-off-by:
-
Colin Ian King authored
An if statement is indented correctly and an outb statement has a redundant empty comment and incorrect indentation. Fix these. Signed-off-by:
-
Colin Ian King authored
There are several lines where the indentation has an extra space, fix this by removing the spaces. Signed-off-by:
-
Colin Ian King authored
Clean up { brace to fix cppcheck warning. Remove some trailing spaces at end of a statement. Also clean up an indentation issue. Signed-off-by: -
Stanley Chu authored
This patch adds UFS support for MediaTek SoC chips. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
Stanley Chu authored
Add UFS M-PHY driver on MediaTek chipsets. Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
-
Stanley Chu authored
Add UFS and UFS PHY node document for Mediatek SoC chips. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Stanley Chu authored
Add UFS M-PHY node document for MediaTek SoC chips. Signed-off-by:
-
Stanley Chu authored
ufshcd_get_pwr_dev_param function and ufs_dev_params struct have been relocated to ufs core. Switch ufs-hisi to the common interface. Signed-off-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Stanley Chu authored
ufshcd_get_pwr_dev_param function and ufs_dev_params struct have been relocated to ufs core. Switch ufs-qcom to the common interface. Signed-off-by:
-
Stanley Chu authored
ufshcd_get_pwr_dev_param defines an interface for power mode management currently used by both ufs-qcom and ufs-hisi. Move the interface to ufs core so every driver can take advantage of it. Signed-off-by:
-
Dongli Zhang authored
Use HCTX_TYPE_DEFAULT instead of 0 to avoid hardcoding. Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by:
-
Dongli Zhang authored
Use HCTX_TYPE_DEFAULT instead of 0 to avoid hardcoding. Signed-off-by:
-
Dongli Zhang authored
Use HCTX_TYPE_DEFAULT instead of 0 to avoid hardcoding. Signed-off-by:
-
Dongli Zhang authored
Use HCTX_TYPE_DEFAULT instead of 0 to avoid hardcoding. Signed-off-by:
-
Kangjie Lu authored
devm_reset_control_get could fail, so the fix checks its return value and passes the error code upstream in case it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
-
Colin Ian King authored
There are several lines of code where the indentation is at an incorrect level; fix these. Signed-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Finn Thain authored
Cc: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
Adjust comments accordingly. Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Bart Van Assche authored
All code from which the OSD include files were included has been removed. Hence also remove the include files themselves. See also commit 19fcae3d ("scsi: remove the SCSI OSD library"). Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Christoph Hellwig authored
This function is only used inside the SCSI midlayer. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Hannes Reinecke authored
no_scsi2_lun_in_cdb declares a new bitfield, but we should rather move it to the existing bitfield for better alignment. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
James Smart authored
Update lpfc version to 12.2.0.0 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Revise driver copyright message to show 2019. Update couple of files modified by 12.2.0.1 patch set. Signed-off-by:
-
James Smart authored
Update the 6072 log message string to print the whole 32 bits of the extended status. Signed-off-by:
-
James Smart authored
Driver had duplicated log message numbers making debug difficult. Make all messages unique. Signed-off-by:
-
James Smart authored
Change the SLI4 queue creation code to use NUMA node based memory allocation based on the cpu the queues will be related to. Signed-off-by:
-
James Smart authored
Currently the driver maintains a sideband structure which has a pointer for each queue element. However, at 8 bytes per pointer, and up to 4k elements per queue, and 100s of queues, this can take up a lot of memory. Convert the driver to using an access routine that calculates the element address based on its index rather than using the pointer table. Signed-off-by:
-
James Smart authored
When in trunking mode, the adapter can be placed into diagnostic mode and each link in the trunk tested via loopback. Add support to the driver to perform per-link loopback testing when in trunking mode. Signed-off-by:
-
James Smart authored
Driver is using uint16_t and is encountering an overflow of the 16bits when calculating link speed. Fix by using a u32 type. Signed-off-by:
-
James Smart authored
If all the trunk links drop and a single link resumes, the link_state is not properly reported. When trunked, the driver receives two async cqes. One acqe reports the trunk link states, which the driver records. The other cqe reports the overall state of the trunk. In the failing case, the trunk link state acqe preceeds the overall trunk link state acqe. The trunk link state acqe, as it's an "up" transition, calls a code path which ensures a down transition before moving to the up state. The down transition had a side effect of clearing the just-saved trunk link states. Fix by not clearing the trunk link states if we've already transitioned to a down state. Signed-off-by:
-
James Smart authored
Invalid test is allowing Loop to be a supported topology on G6 and G7 adapters. The chips do not support loop as their link speeds prohibit loop per standard. Correct the conditional so that loop is not reported. Signed-off-by:
-
James Smart authored
The driver is currently reporting the firmware revision not the actual boot bios version in FDMI data. Modify the driver to obtain the boot bios version from the adapter and use that data in the FMDI data sent to the switch. Signed-off-by:
-
James Smart authored
The switch is rejecting FDMI2 registration for symbolic name. There is a "\n" in the name string, which the switch dislikes thus rejects the registration. Signed-off-by:
-
James Smart authored
The driver is reporting support for NVME even when not configured for NVME operation. Fix (and make more readable) when NVME protocol support is indicated. Signed-off-by:
-
James Smart authored
The FDMI manufacturer value being reported on Linux is inconsistent with other OS's. Set the value to "Emulex Corporation" for consistency. Signed-off-by:
-
James Smart authored
If the driver undergoes repeated host resets it starts losing exchange structures and eventually returns SCSI_MLQUEUE_HOST_BUSY and does not recover. The offline path is not reclaiming the outstanding ios on the fcp pring txcmplq before calling lpfc_destroy_multixripool, which causes the txmcplq to be reinit and the resources lost. Flush the fcp rings before destroying the multixripools. Signed-off-by:
-
James Smart authored
The adapter initialization sequence enables interrupts, initializes the adapter link_state to LINK_DOWN, then issues commands to initialize the adapter. The interrupt handler on the adapter validates the link_state (has to be at least LINK_DOWN) and if invalid, will discard the interrupting event. In most cases, there is not a command completion, thus an interrupt until the initialization commands have been sent which is post the setting of state to LINK_DOWN. However, in cases of firmware reset, the reset will modify the link_state to an invalid value (indicating a reset of the adapter) and there occasionally are cases where the adapter will generate an asynchronous event which shares the eq/cq used for mailbox commands. In the failure case, an interrupt is generated immediately after enabling them due to the async event. As link_state is invalid, the eq is list and the CQ not serviced. At this point link_state is initialized and the mailbox command sent. As the CQ has not been serviced, it is not armed, so no interrupt event is generated when the mailbox command completes. Modify the initialization sequence so that interrupts are enabled after link_state is properly initialized, which avoids the race condition with the async event. Signed-off-by:
-
