Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The patch before this changed the way in which we allocate space for the
PPGTT PDEs. It began carving out the PPGTT PDEs (which live in the
Global GTT) from the GGTT's drm_mm. Prior to that patch, the PDEs were
hidden from the drm_mm, and therefore could never fail to be allocated.

In unfortunate cases, the drm_mm may be full when we want to allocate
the space. This can technically occur whenever we try to allocate, which
happens in two places currently. Practically, it can only really ever
happen at GPU reset.

Later, when we allocate more PDEs for multiple PPGTTs this will
potentially even more useful.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

When PPGTT support was originally enabled, it was only designed to
support 1 PPGTT. It therefore made sense to simply hide the GGTT space
required to enable this from the drm_mm allocator.

Since we intend to support full PPGTT, which means more than 1, and they
can be created and destroyed ad hoc it will be required to use the
proper allocation techniques we already have.

The first step here is to make the existing single PPGTT use the
allocator.

The astute observer will notice that we are reserving space in the GGTT
for the PDEs for the lifetime of the address space, and would be right
to question whether or not this is a good idea. It does not make a
difference with this current patch only the aliasing PPGTT (indeed the
PDEs should still be hidden from the shrinker). For the future, we are
allocating from top to bottom to avoid using the precious "gtt
space" The GGTT space at that point should only be used for scanout, HW
contexts, ringbuffers, HWSP, PDEs, and a couple of other small buffers
(potentially) used by the kernel. Everything else should be mapped into
a PPGTT. To put the consumption in more tangible terms, it takes
approximately 4 sets of PDEs to equal one 19x10 framebuffer (with no
fancy stride or alignment constraints). 3/4 of the total [average] GGTT
can be used for PDEs, and hopefully never touch the 1/4 that the
framebuffer needs.

The astute, and persistent observer might ask about the page tables
which are also pinned for the address space. This waste is unfortunate.
We use 2MB of memory per address space. We leave wrapping the PDEs as a
real GEM object as a TODO.

v2: Align PDEs to 64b in GTT
Allocate the node dynamically so we can use drm_mm_put_block
Now tested on IGT
Allocate node at the top to avoid fragmentation (Chris)

v3: Use Chris' top down allocator

v4: Embed drm_mm_node into ppgtt struct (Jesse)
Remove hunks which didn't belong (Jesse)

v5: Don't subtract guard page since we now killed the guard page prior
to this patch. (Ben)

v6: Rebased and removed guard page stuff.
Added a chunk to the commit message
Allow adding a context to mappable region

v7: Undo v3, so we can make the drm patch last in the series

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v4)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>

squash: drm/i915: allow PPGTT to use mappable
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The plan to to make every file descriptor have a default context. To
accommodate this, generalize out default context setup function so it
can be used at file open time.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We **need** to do this for exactly 1 reason, because we want to embed a
PPGTT into the context, but we don't want to special case the default
context.

To achieve that, we must be able to initialize contexts after the GTT is
setup (so we can allocate and pin the default context's BO), but before
the PPGTT and rings are initialized. This is because, currently, context
initialization requires ring usage. We don't have rings until after the
GTT is setup. If we split the enabling part of context initialization,
the part requiring the ringbuffer, we can untangle this, and then later
embed the PPGTT

Incidentally this allows us to also adhere to the original design of
context init/fini in future patches: they were only ever meant to be
called at driver load and unload.

v2: Move hw_contexts_disabled test in i915_gem_context_enable() (Chris)

v3: BUG_ON after checking for disabled contexts. Or else it blows up pre
gen6 (Ben)

v4: Forward port
Modified enable for each ring, since that patch is earlier in the series
Dropped ring arg from create_default_context so it can be used by others
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This patch adds to changes for contexts on reset:
Sets last context to default - this will prevent the context switch
happening after a reset. That switch is not possible because the
rings are hung during reset and context switch requires reset. This
behavior will need to be reworked in the future, but this is what we
want for now.

In the future, we'll also want to reset the guilty context to
uninitialized. We should wait for ARB_Robustness related code to land
for that.

This is somewhat for paranoia.  Because we really don't know what the
GPU was doing when it hung, or the state it was in (mid context write,
for example), later restoring the context is a bad idea. By setting the
flag to not initialized, the next load of that context will not restore
the state, and thus on the subsequent switch away from the context will
overwrite the old data.

NOTE: This code needs a fixup when we actually have multiple VMs. The
issue that can occur is inactive objects in a VM will need to be
destroyed before the last context unref. This can now happen via the
fake switch introduced in this patch (and it other ways in the future)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Previously we dropped the association of a context to a ring. It is
however very important to know which ring a context ran on (we could
have reused the other member, but I was nitpicky).

This is very important when we switch address spaces, which unlike
context objects, do change per ring.

As an example, if we have:

        RCS   BCS
ctx            A
ctx      A
ctx      B
ctx            B

Without tracking the last ring B ran on, we wouldn't know to switch the
address space on BCS in the last row.

As a result, we no longer need to track which ring a context "belongs"
to, as it never really made much sense anyway.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

If we want to use contexts in more abstract terms (specifically with
PPGTT in mind), we need to allow them to be specified for any ring.

Since the upcoming patches will bring about the use of multiple address
spaces, and each ring needs to have an address space programmed (which
we intend to do at context switch time), we can no longer only use RCS.

With multiple rings having a last context, we must now unreference these
contexts.

NOTE: This commit requires an update to intel-gpu-tools to make it not
fail.

v2: Rebased with some logical conflicts.
Squashed in the context fini refcount patch
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

With the introduction of contexts per fd in the future, one can easily
envision more contexts being used. We do not have an easy remedy to
reduce the space requirements of the contexts, we can make things
slightly better by using less stringent alignments on later hardware.

Ville: Since I can almost predict you'll point this out. I can no longer
find the docs which specify the 64k requirement on certain gen6 SKUs. If
you'd like to change that too, be my guest.

CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We'll be doing a bit more stuff with each file, so having our own open
function should make things clean.

This also allows us to easily add conditionals for stuff we don't want
to do when we don't have HW contexts.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The only place we were using it was for GEN6, which won't have PPGTT
support anyway (ie. the VM is always the same). To clear things up,
(it only added confusion for me since it doesn't allow us to assert
vma->vm is what we always want, when just looking at the code).
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

To sum up what goes on here, we abstract the vma binding, similarly to
the previous object binding. This helps for distinguishing legacy
binding, versus modern binding. To keep the code churn as minimal as
possible, I am leaving in insert_entries(). It serves as the per
platform pte writing basically. bind_vma and insert_entries do share a
lot of similarities, and I did have designs to combine the two, but as
mentioned already... too much churn in an already massive patchset.

What follows are the 3 commits which existed discretely in the original
submissions. Upon rebasing on Broadwell support, it became clear that
separation was not good, and only made for more error prone code. Below
are the 3 commit messages with all their history.

drm/i915: Add bind/unbind object functions to VMA
drm/i915: Use the new vm [un]bind functions
drm/i915: reduce vm->insert_entries() usage

drm/i915: Add bind/unbind object functions to VMA

As we plumb the code with more VM information, it has become more
obvious that the easiest way to deal with bind and unbind is to simply
put the function pointers in the vm, and let those choose the correct
way to handle the page table updates. This change allows many places in
the code to simply be vm->bind, and not have to worry about
distinguishing PPGTT vs GGTT.

Notice that this patch has no impact on functionality. I've decided to
save the actual change until the next patch because I think it's easier
to review that way. I'm happy to squash the two, or let Daniel do it on
merge.

v2:
Make ggtt handle the quirky aliasing ppgtt
Add flags to bind object to support above
Don't ever call bind/unbind directly for PPGTT until we have real, full
PPGTT (use NULLs to assert this)
Make sure we rebind the ggtt if there already is a ggtt binding.  This
happens on set cache levels.
Use VMA for bind/unbind (Daniel, Ben)

v3: Reorganize ggtt_vma_bind to be more concise and easier to read
(Ville). Change logic in unbind to only unbind ggtt when there is a
global mapping, and to remove a redundant check if the aliasing ppgtt
exists.

v4: Make the bind function a bit smarter about the cache levels to avoid
unnecessary multiple remaps. "I accept it is a wart, I think unifying
the pin_vma / bind_vma could be unified later" (Chris)
Removed the git notes, and put version info here. (Daniel)

v5: Update the comment to not suck (Chris)

v6:
Move bind/unbind to the VMA. It makes more sense in the VMA structure
(always has, but I was previously lazy). With this change, it will allow
us to keep a distinct insert_entries.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>

drm/i915: Use the new vm [un]bind functions

Building on the last patch which created the new function pointers in
the VM for bind/unbind, here we actually put those new function pointers
to use.

Split out as a separate patch to aid in review. I'm fine with squashing
into the previous patch if people request it.

v2: Updated to address the smart ggtt which can do aliasing as needed
Make sure we bind to global gtt when mappable and fenceable. I thought
we could get away without this initialy, but we cannot.

v3: Make the global GTT binding explicitly use the ggtt VM for
bind_vma(). While at it, use the new ggtt_vma helper (Chris)

At this point the original mailing list thread diverges. ie.

v4^:
use target_obj instead of obj for gen6 relocate_entry
vma->bind_vma() can be called safely during pin. So simply do that
instead of the complicated conditionals.
Don't restore PPGTT bound objects on resume path
Bug fix in resume path for globally bound Bos
Properly handle secure dispatch
Rebased on vma bind/unbind conversion
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>

drm/i915: reduce vm->insert_entries() usage

FKA: drm/i915: eliminate vm->insert_entries()

With bind/unbind function pointers in place, we no longer need
insert_entries. We could, and want, to remove clear_range, however it's
not totally easy at this point. Since it's used in a couple of place
still that don't only deal in objects: setup, ppgtt init, and restore
gtt mappings.

v2: Don't actually remove insert_entries, just limit its usage. It will
be useful when we introduce gen8. It will always be called from the vma
bind/unbind.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Using the current state of the page directory registers, we can
determine which of our address spaces was active when the hang occurred.
This allows us to scan through all the address spaces to identify the
"active" one during error capture.

v2: Rebased for BDW error detection. BDW error detection is similar
except instead of PP_DIR_BASE, we can use the PDP registers.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Add FIXME about global gtt misuse.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The existing check was insufficient to determine whether we can use the
GTT mapping to read out the object during error capture.

The previous condition was, if the object has a GGTT mapping, and the
reloc is in the GTT range... the can happen with opjects mapped into
multiple vms (one of which being the GTT).

There are two solutions to this problem:
1. This patch, which avoid reading the io mapping
2. Use the GGTT offset with the io mapping.

Since error capture is about recording the most accurate possible error
state, and the error was caused by the object not in the GGTT - I opted
for the former.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

formerly: drm/i915: Create VMAs (part 6) - finish error plumbing
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This came from a patch called, "drm/i915: Move active to vma"

When moving an object to the inactive list, we do it for all VMs for
which the object is bound.

The primary difference from that patch is this time around we don't not
track 'active' per vma, but rather by object. Therefore, we only need
one unref.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This was found by code inspection. If the GTT setup fails then we are
left without properly tearing down the drm_mm.

Hopefully this never happens.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

To be able to effectively use the GGTT object lookup function, we don't
want to warn when there is no GGTT mapping. Let the caller deal with it
instead.

Originally, I had intended to have this behavior, and has not
introduced the WARN. It was introduced during review with the addition
of the follow commit

commit 5c2abbea
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Tue Sep 24 09:57:57 2013 -0700

    drm/i915: Provide a cheap ggtt vma lookup
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Since the beginning, the functions which try to properly reference the
aliasing PPGTT have deferences a potentially null aliasing_ppgtt member.
Since the accessors are meant to be global, this will not do.

Introduced originally in:
commit a70a3148
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Wed Jul 31 16:59:56 2013 -0700

    drm/i915: Make proper functions for VMs
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The initial implementation of this function used MMIO to write the PDPs.
Upon review it was determined (correctly) that the docs say to use LRI.
The issue is there are times where we want to do a synchronous write
(GPU reset).

I've tested this, and it works. I've verified with as many people as
possible that it should work.

This should fix the failing reset problems.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Linux 3.13-rc3

I need a backmerge for two reasons:
- For merging the ppgtt patches from Ben I need to pull in the bdw
  support.
- We now have duplicated calls to intel_uncore_forcewake_reset in the
  setup code to due 2 different patches merged into -next and 3.13.
  The conflict is silen so I need the merge to be able to apply
  Deepak's fixup patch.

Conflicts:
	drivers/gpu/drm/i915/intel_display.c

Trivial conflict, it doesn't even show up in the merge diff.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Currently, PC8 is enabled at modeset_global_resources, which is called
after intel_modeset_update_state. Due to this, there's a small race
condition on the case where we start enabling PC8, then do a modeset
while PC8 is still being enabled. The racing condition triggers a WARN
because intel_modeset_update_state will mark the CRTC as enabled, then
the thread that's still enabling PC8 might look at the data structure
and think that PC8 is being enabled while a pipe is enabled. Despite
the WARN, this is not really a bug since we'll wait for the
PC8-enabling thread to finish when we call modeset_global_resources.

The spec says the CRTC cannot be enabled when we disable LCPLL, so we
had a check for crtc->base.enabled. If we change to crtc->active we
will still prevent disabling LCPLL while the CRTC is enabled, and we
will also prevent the WARN above.

This is a replacement for the previous patch named
    "drm/i915: get/put PC8 when we get/put a CRTC"

Testcase: igt/pm_pc8/modeset-lpsp-stress-no-wait
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "A regression showed up that there's a large delay when enabling all
  events.  This was prevalent when FTRACE_SELFTEST was enabled which
  enables all events several times, and caused the system bootup to
  pause for over a minute.

  This was tracked down to an addition of a synchronize_sched()
  performed when system call tracepoints are unregistered.

  The synchronize_sched() is needed between the unregistering of the
  system call tracepoint and a deletion of a tracing instance buffer.
  But placing the synchronize_sched() in the unreg of *every* system
  call tracepoint is a bit overboard.  A single synchronize_sched()
  before the deletion of the instance is sufficient"

* tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Only run synchronize_sched() at instance deletion time

Pull aio fix from Benjamin LaHaise:
 "AIO fix from Gu Zheng that fixes a GPF that Dave Jones uncovered with
  trinity"

* git://git.kvack.org/~bcrl/aio-next:
  aio: clean up aio ring in the fail path

Pull SCSI fixes from James Bottomley:
 "This is a set of nine fixes (and one author update).

  The libsas one should fix discovery in eSATA devices, the WRITE_SAME
  one is the largest, but it should fix a lot of problems we've been
  getting with the emulated RAID devices (they've been effectively lying
  about support and then firmware has been choking on the commands).

  The rest are various crash, hang or warn driver fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] bfa: Fix crash when symb name set for offline vport
  [SCSI] enclosure: fix WARN_ON in dual path device removing
  [SCSI] pm80xx: Tasklets synchronization fix.
  [SCSI] pm80xx: Resetting the phy state.
  [SCSI] pm80xx: Fix for direct attached device.
  [SCSI] pm80xx: Module author addition
  [SCSI] hpsa: return 0 from driver probe function on success, not 1
  [SCSI] hpsa: do not discard scsi status on aborted commands
  [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers
  [SCSI] libsas: fix usage of ata_tf_to_fis

Pull IMA fixes from James Morris:
 "Here are two more fixes for IMA"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  ima: properly free ima_template_entry structures
  ima: Do not free 'entry' before it is initialized

Pull devicetree fixes from Rob Herring:
 - Various DT binding documentation updates
 - Add Kumar Gala and remove Stephen Warren as DT binding maintainers

* tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt: binding: reword PowerPC 8xxx GPIO documentation
  ARM: tegra: delete nvidia,tegra20-spi.txt binding
  hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv)
  of: add vendor prefix for GMT
  clk: exynos: Fix typos in DT bindings documentation
  of: Add vendor prefix for LG Corporation
  Documentation: net: fsl-fec.txt: Add phy-supply entry
  ARM: dts: doc: Document missing binding for omap5-mpu
  dt-bindings: add ARMv8 PMU binding
  MAINTAINERS: remove swarren from DT bindings
  MAINTAINERS: Add Kumar to Device Tree Binding maintainers group

Clean up the aio ring file in the fail path of aio_setup_ring
and ioctx_alloc. And maybe it can fix the GPF issue reported by
Dave Jones:
https://lkml.org/lkml/2013/11/25/898Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>

Merge branch 'free-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus

Pull power management fixes from Rafael Wysocki:

 - cpufreq regression fix from Bjørn Mork restoring the pre-3.12
   behavior of the framework during system suspend/hibernation to avoid
   garbage sysfs files from being left behind in case of a suspend error

 - PNP regression fix to restore the correct states of devices after
   resume from hibernation broken in 3.12.  From Dmitry Torokhov.

 - cpuidle fix to prevent cpuidle device unregistration from crashing
   due to a NULL pointer dereference if cpuidle has been disabled from
   the kernel command line.  From Konrad Rzeszutek Wilk.

 - intel_idle fix for the C6 state definition on Intel Avoton/Rangeley
   processors from Arne Bockholdt.

 - Power capping framework fix to make the energy_uj sysfs attribute
   work in accordance with the documentation.  From Srinivas Pandruvada.

 - epoll fix to make it ignore the EPOLLWAKEUP flag if the kernel has
   been compiled with CONFIG_PM_SLEEP unset (in which case that flag
   should not have any effect).  From Amit Pundir.

 - cpufreq fix to prevent governor sysfs files from being lost over
   system suspend/resume in some (arguably unusual) situations.  From
   Viresh Kumar.

* tag 'pm-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PowerCap: Fix mode for energy counter
  PNP: fix restoring devices after hibernation
  cpuidle: Check for dev before deregistering it.
  epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled
  cpufreq: fix garbage kobjects on errors during suspend/resume
  cpufreq: suspend governors on system suspend/hibernate
  intel_idle: Fixed C6 state on Avoton/Rangeley processors

* pm-epoll:
  epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled

* pnp:
  PNP: fix restoring devices after hibernation

* powercap:
  PowerCap: Fix mode for energy counter

* pm-cpuidle:
  cpuidle: Check for dev before deregistering it.
  intel_idle: Fixed C6 state on Avoton/Rangeley processors

* pm-cpufreq:
  cpufreq: fix garbage kobjects on errors during suspend/resume
  cpufreq: suspend governors on system suspend/hibernate

Pull arch/tile ftrace bug fix from Chris Metcalf:
 "This fixes a build failure with allyesconfig reported by Fengguang Wu
  and fixed by Tony Lu"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  ftrace: default to tilegx if ARCH=tile is specified

Pull block layer fixes from Jens Axboe:
 "A small collection of fixes for the current series. It contains:

   - A fix for a use-after-free of a request in blk-mq.  From Ming Lei

   - A fix for a blk-mq bug that could attempt to dereference a NULL rq
     if allocation failed

   - Two xen-blkfront small fixes

   - Cleanup of submit_bio_wait() type uses in the kernel, unifying
     that.  From Kent

   - A fix for 32-bit blkg_rwstat reading.  I apologize for this one
     looking mangled in the shortlog, it's entirely my fault for missing
     an empty line between the description and body of the text"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: fix use-after-free of request
  blk-mq: fix dereference of rq->mq_ctx if allocation fails
  block: xen-blkfront: Fix possible NULL ptr dereference
  xen-blkfront: Silence pfn maybe-uninitialized warning
  block: submit_bio_wait() conversions
  Update of blkg_stat and blkg_rwstat may happen in bh context

Pull NFS client bugfixes from Trond Myklebust:
 - Stable fix for a NFSv4.1 delegation and state recovery deadlock
 - Stable fix for a loop on irrecoverable errors when returning
   delegations
 - Fix a 3-way deadlock between layoutreturn, open, and state recovery
 - Update the MAINTAINERS file with contact information for Trond
   Myklebust
 - Close needs to handle NFS4ERR_ADMIN_REVOKED
 - Enabling v4.2 should not recompile nfsd and lockd
 - Fix a couple of compile warnings

* tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: fix do_div() warning by instead using sector_div()
  MAINTAINERS: Update contact information for Trond Myklebust
  NFSv4.1: Prevent a 3-way deadlock between layoutreturn, open and state recovery
  SUNRPC: do not fail gss proc NULL calls with EACCES
  NFSv4: close needs to handle NFS4ERR_ADMIN_REVOKED
  NFSv4: Update list of irrecoverable errors on DELEGRETURN
  NFSv4 wait on recovery for async session errors
  NFS: Fix a warning in nfs_setsecurity
  NFS: Enabling v4.2 should not recompile nfsd and lockd

This matches the existing behavior in arch/tile/Makefile for defconfig.

Reported-by: fengguang.wu@intel.com
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Tony Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>