vzalloc expects void* and not void __iomem*.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Instead of waiting for BTM indication we should wait for preboot ready.
Consider the below scenario:
    1. FW update is being triggered
           - setting the dirty bit
    2. hard reset will be triggered due to the dirty bit
    3. FW initiates the reset:
           - dirty bit cleared
           - BTM indication cleared
           - preboot ready indication cleared
    4. during hard reset:
           - BTM indication will be set
           - BIST test performed and another reset triggered
    5. only after this reset the preboot will set the preboot ready

When polling on BTM indication alone we can lose sync with FW while
trying to communicate with FW that is during reset.
To overcome this we will always wait to preboot ready indication.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Need to put fences even if an unexpected status value is received while
waiting for a fence.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The -ERESTARTSYS return value is not handled correctly when a signal is
received while waiting for CS completion.
This can lead to bad output values to user when waiting for a single CS
completion, and more severe, it can cause a non-stopping loop when
waiting to multi-CS completion and until a CS timeout.

Fix the handling and exit the waiting if this return value is received.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

This patch fixes a bug that was found in the dmabuf flow.
Bug description as found on Gaudi2 device:
1. User allocates 4MB of device memory
    - Note that although the allocation size was 4MB the HMMU allocated
      a full page of 768MB to back the request.
    - The user gets a memory handle that points to a single page (768MB)
    - Mapping the handle, the user gets virtual address to the start of
      the page.
2. User exports the buffer
3. User registers the exported buffer in the importer. This flow has
   a callback to the exporter which in turn converts the phys_page_pack
   to an SG list for the importer. This SG list is of single entry of
   size 768MB. However, the size that was passed to the importer was
   only 4MB.

The solution for this is to make sure the importer gets exposure only
to the exported size.

This will be done by fixing the SG created by the exporter to be of
the total size of the actual exported memory requested by the user.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

A previous commit deprecated the option to export from handle, leaving
the code with no support for devices with virtual memory.

This commit modifies the export API in a way that unifies the uAPI to
user address for both cases (i.e. with and without MMU support) and add
the actual support for devices with virtual memory.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Validate export parameters in a dedicated function instead of in the
main export flow.
This will be useful later when support to export dmabuf for devices
with virtual memory will be added.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The API to the user which allows exporting DMA buffer from handle is
deprecated here. It was never used as it is relevant only for Gaudi2,
and the user stack has yet to add support for dmabuf in Gaudi2.

Looking forward, a modified API to export DMA buffer for ASICs that
supports virtual memory will be added.

Until the new API will be ready- exporting DMA buffer will not be
supported for ASICs with virtual memory.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

This warning doesn't have real consequences, and therefore can be
printed in debug level.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Call COMMS tracepoints from within the dynamic CPU FW load.
This can help debug failures or delays in the dynamic FW load flow.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As the COMMS protocol is being used more widely in our driver,
an available debug tool for the handshake will be handy.

This commit defines tracepoints to various key points of the COMMS
protocol.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In certain scenarios, firmware might encounter a fatal event for
which a device reset is required. Hence, a proper notification
is needed for driver to be aware and initiate a reset sequence.

In secured environments the reset will be performed by firmware
without an explicit request from the driver.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When user context is released and hpriv_release() is called, there is a
device idle status check, to understand if user has left the device not
idle and then a reset is required.

However, if the user process is killed because of device hard reset,
the device at this point would always be not idle, because the device
engines were already forcefully halted.

Modify hpriv_release() to skip the idle check if reset is in progress.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

timestamp events that expire on the same interrupt will get the same
timestamp value
Signed-off-by: Tamir Gilad-Raz <tgiladraz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to reduce error log, we try to minimize the dumped rows
while keeping all relevant error info. In addition we completely
remove clock throttling debug logs.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

During event handling we extract interrupt cause and count it.
In case we could not find any cause we should add proper error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

If the f/w reports the binning masks at the preboot stage, the driver
must align its DRAM properties according to the new information.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Removing double assignment of the hop2_pte_addr
variable in dram_default_mapping_fini().

Dead store reported by clang-analyzer.
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As ASICs are evolving, we will need to update the DRAM properties at
various points because we may get different information from the f/w
at different points of the initialization.

This ASIC function is a foundation for this capability.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As hl_mmap_mem_buf_get() is called also from IOCTLs which can have a
bad handle from user, modify the print for "no match to handle" to use
dev_dbg().
Calls to this function which are not dependent on user, already have an
error print when the function fails.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The refcount of a CB buffer is initialized when user allocates a CB,
and is decreased when he destroys the CB handle.

If this refcount is increased also from kernel and user sends more than
one destroy requests for the handle, the buffer will be released/freed
and later be accessed when the refcount is put from kernel side.

To avoid it, prevent user from destroying the handle more than once.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As clock throttling due to high power consumption can happen very
frequently and there is no real reason to notify the user about it,
we skip this notification in all asics.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

User should close the FD when being notified about an error, after
which a device reset takes place.

However, if the user has pending threads that wait for completions,
the device release won't be called and eventually the watchdog timeout
will expire, leading to hard reset and killing the user process.

To avoid it, abort such waiting threads right after the error
notification, and block following waiting operations.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The device file is not in use when hl_device_release() is called,
and there aren't any user threads that use IOCTLs to wait for
interrupts. Therefore there is no need to release them at this point.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Sometimes we need the binning info at a very early state of the
driver initialization. Therefore, support was added in preboot to
provide the binning info as part of the f/w descriptor and the driver
can now use that.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Fix programming incorrect value of address range
Signed-off-by: tal albo <talbo@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

drm-misc-next for v6.3:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * EDID: Improved mode parsing and refactoring

 * fbdev: Cleanups

 * format-helper: Add conversion from XRGB8888 to XBGR8888 and ABGR8888

Driver Changes:

 * accel/ivpu: Add driver for Intel VPU accelerator

 * bridge: Support i.MX93 LDB plus DT bindings

 * exynos: Fixes

 * panel: vtdr6130: Fixes; Support AUO A030JTN01 plus DT bindings

 * simpledrm: Support system-memory framebuffers plus DT bindings

 * ssd130x: Fix sparse warning
Signed-off-by: Dave Airlie <airlied@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPQN9YACgkQaA3BHVML
# eiNmmQf/bTV3oaMo55i3tYxhMCWYDtPVk+GGglDAykW7Lid8pvy6mJqJoW6uvgQF
# c6CcoY+6yG2WvnVLhXyhPaACiG5weQSdu3S/DdZ2nuJCb50YCwWNNKcu3qYnLVlz
# 2NQ/s0HN+Xvvy76GJFNarKlxSNADPWCNJ8wExAdBkWr7q8NiDfsWuMGrQRQORrm3
# zEkSJPKtWNHa+vmsQOO9yebD0LFx97CoU40FrVXZTtF0FugGIXjiknQwekzuFxdY
# fGBiFKsI+Y3s51gAppbmRRJ0jGLj3KDF5S+5GM8FNbgJQF67Wxttl/YtY6lJGcsa
# l0vpRoCe1ilhNVvoikzAu7UewkPKKA==
# =GLLt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 25 Jan 2023 05:56:06 AEST
# gpg:                using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y9A5ceDknyQixM3R@linux-uq9g

amd-drm-next-6.3-2023-01-20:

amdgpu:
- Secure display fixes
- Fix scaling
- Misc code cleanups
- Display BW alloc logic updates
- DCN 3.2 fixes
- Fix power reporting on certain firmwares for CZN/RN
- SR-IOV fixes
- Link training cleanup and code rework
- HDCP fixes
- Reserved VMID fix
- Documentation updates
- Colorspace fixes
- RAS updates
- GC11.0 fixes
- VCN instance harvesting fixes
- DCN 3.1.4/5 workarounds for S/G displays
- Add PCIe info to the INFO IOCTL

amdkfd:
- XNACK fix

UAPI:
- Add PCIe gen/lanes info to the amdgpu INFO IOCTL
  Nesa ultimately plans to use this to make decisions about buffer placement optimizations
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120234523.7610-1-alexander.deucher@amd.com

drm-misc-next for $kernel-version:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

 * Cleanup unneeded include statements wrt <linux/fb.h>, <drm/drm_fb_helper.h>
   and <drm/drm_crtc_helper.h>

 * Remove unused helper DRM_DEBUG_KMS_RATELIMITED()

 * fbdev: Remove obsolete aperture field from struct fb_device, plus
   driver cleanups; Remove unused flag FBINFO_MISC_FIRMWARE

 * MIPI-DSI: Fix brightness, plus rsp. driver updates

 * scheduler: Deprecate drm_sched_resubmit_jobs()

 * ttm: Fix MIPS build; Remove ttm_bo_wait(); Documentation fixes

Driver Changes:

 * Remove obsolete drivers for userspace modesetting i810, mga, r128,
   savage, sis, tdfx, via

 * bridge: Support CDNS DSI J721E, plus DT bindings; lt9611: Various
   fixes and improvements; sil902x: Various fixes; Fixes

 * nouveau: Removed support for legacy ioctls; Replace zero-size array;
   Cleanups

 * panel: Fixes

 * radeon: Use new DRM logging helpers
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8kDk5YX7Yz3eRhM@linux-uq9g

Merge tag 'drm-intel-gt-next-2023-01-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

Fixes/improvements/new stuff:

- Fix workarounds on Gen2-3 (Tvrtko Ursulin)
- Fix HuC delayed load memory leaks (Daniele Ceraolo Spurio)
- Fix a BUG caused by impendance mismatch in dma_fence_wait_timeout and GuC (Janusz Krzysztofik)
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663 (Matt Atwood)
- Apply recommended L3 hashing mask tuning parameters (Gen12+) (Matt Roper)
- Improve suspend / resume times with VT-d scanout workaround active (Andi Shyti, Chris Wilson)
- Silence misleading "mailbox access failed" warning in snb_pcode_read (Ashutosh Dixit)
- Fix null pointer dereference on HSW perf/OA (Umesh Nerlige Ramappa)
- Avoid trampling the ring during buffer migration (and selftests) (Chris Wilson, Matthew Auld)
- Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state (Matthew Auld)
- More fixing of DG2 visual corruption by not forgetting to copy CCS aux state of backup objects (Matthew Auld)
- Fix TLB invalidation for Gen12.50 video and compute engines (Andrzej Hajda)
- Limit Wa_22012654132 to just specific steppings (Matt Roper)
- Fix userspace crashes due eviction not working under lock contention after the object locking conversion (Matthew Auld)
- Avoid double free is user deploys a corrupt GuC firmware (John Harrison)
- Fix 32-bit builds by using "%zu" to format size_t (Nirmoy Das)
- Fix a possible BUG in TTM async unbind due not reserving enough fence slots (Nirmoy Das)
- Fix potential use after free by not exposing the GEM context id to userspace too early (Rob Clark)
- Show clamped PL1 limit to the user (hwmon) (Ashutosh Dixit)
- Workaround unreliable reset on Jasperlake (Chris Wilson)
- Cover rest of SVG unit MCR registers (Gustavo Sousa)
- Avoid PXP log spam on platforms which do not support the feature (Alan Previn)
- Re-disable RC6p on Sandy Bridge to avoid GPU hangs and visual glitches (Sasa Dragic)

Future platform enablement:

- Manage uncore->lock while waiting on MCR register (Matt Roper)
- Enable Idle Messaging for GSC CS (Vinay Belgaumkar)
- Only initialize GSC in tile 0 (José Roberto de Souza)
- Media GT and Render GT share common GGTT (Aravind Iddamsetty)
- Add dedicated MCR lock (Matt Roper)
- Implement recommended caching policy (PVC) (Wayne Boyer)
- Add hardware-level lock for steering (Matt Roper)
- Check full IP version when applying hw steering semaphore (Matt Roper)
- Enable GuC GGTT invalidation from the start (Daniele Ceraolo Spurio)
- MTL GSC firmware support (Daniele Ceraolo Spurio, Jonathan Cavitt)
- MTL OA support (Umesh Nerlige Ramappa)
- MTL initial gt workarounds (Matt Roper)

Driver refactors:

- Hold forcewake and MCR lock over PPAT setup (Matt Roper)
- Acquire fw before loop in intel_uncore_read64_2x32 (Umesh Nerlige Ramappa)
- GuC filename cleanups and use submission API version number (John Harrison)
- Promote pxp subsystem to top-level of i915 (Alan Previn)
- Finish proofing the code agains object size overflows (Chris Wilson, Gwan-gyeong Mun)
- Start adding module oriented dmesg output (John Harrison)

Miscellaneous:

- Correct kerneldoc for intel_gt_mcr_wait_for_reg() (Matt Roper)
- Bump up sample period for busy stats selftest (Umesh Nerlige Ramappa)
- Make GuC default_lists const data (Jani Nikula)
- Fix table order verification to check all FW types (John Harrison)
- Remove some limited use register access wrappers (Jani Nikula)
- Remove struct_member macro (Andrzej Hajda)
- Remove hardcoded value with a macro (Nirmoy Das)
- Use helper func to find out map type (Nirmoy Das)
- Fix a static analysis warning (John Harrison)
- Consolidate VMA active tracking helpers (Andrzej Hajda)
- Do not cover all future platforms in TLB invalidation (Tvrtko Ursulin)
- Replace zero-length arrays with flexible-array members (Gustavo A. R. Silva)
- Unwind hugepages to drop wakeref on error (Chris Wilson)
- Remove a couple of superfluous i915_drm.h includes (Jani Nikula)

Merges:

- Merge drm/drm-next into drm-intel-gt-next (Rodrigo Vivi)

danvet: Fix up merge conflict in intel_uc_fw.c, we ended up with 2
copies of try_firmware_load() somehow.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8fW2Ny1B1hZ5ZmF@tursulin-desk

The sparse tool complains with the following warning:

$ make M=drivers/gpu/drm/solomon/ C=2
  CC [M]  drivers/gpu/drm/solomon/ssd130x.o
  CHECK   drivers/gpu/drm/solomon/ssd130x.c
drivers/gpu/drm/solomon/ssd130x.c:363:21: warning: dubious: x & !y

This seems to be a false positive in my opinion but still we can silence
the tool while making the code easier to read. Let's also add a comment,
to explain why the "com_seq" logical not is used rather than its value.
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121190930.2804224-1-javierm@redhat.com

This optional callback was added in the commit 1f45f9db ("fb_defio:
add first_io callback") but it was never used by a driver. Let's remove
it since it's unlikely that will be used after a decade that was added.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-2-javierm@redhat.com

Add XB24 and AB24 to the list of supported formats. The format helpers
support conversion to these formats and they are documented in the
simple-framebuffer device tree bindings.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-8-thierry.reding@gmail.com

Add a conversion helper for the AB24 and XB24 formats to use in
drm_fb_blit().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-7-thierry.reding@gmail.com

Simple framebuffers can be set up in system memory, which cannot be
requested and/or I/O remapped using the I/O resource helpers. Add a
separate code path that obtains system memory framebuffers from the
reserved memory region referenced in the memory-region property.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-6-thierry.reding@gmail.com

The majority of the driver already uses struct iosys_map to encapsulate
accesses to I/O remapped vs. system memory. Accesses via the screen base
pointer still use __iomem annotations, which can lead to inconsistencies
and conflicts with subsequent patches.

Convert the screen base to a struct iosys_map as well for consistency
and to avoid these issues.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-5-thierry.reding@gmail.com

Document the "framebuffer" compatible string for reserved memory nodes
to annotate reserved memory regions used for framebuffer carveouts.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-4-thierry.reding@gmail.com

This is a variant of the 32-bit RGB format where the red and blue
components are swapped.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-3-thierry.reding@gmail.com

In order to support framebuffers residing in system memory, allow the
memory-region property to override the framebuffer memory specification
in the "reg" property.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-2-thierry.reding@gmail.com

Realize that drm_edid_connector_update() and
_drm_connector_update_edid_property() are now the same thing. Drop the
latter.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/712cc299afe33d8f6279a15d5b0117aeeab88bb4.1674144945.git.jani.nikula@intel.com