Don't balance on clone by default.

Balance on clone has a number of trivial performance failure cases, but it was
needed to get decent OpenMP performance on NUMA (Opteron) systems.  Not doing
child-runs-first for new threads also solves this problem in a nicer way
(implemented in a previous patch).
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add some likely/unliklies, a for_each_cpu => for_each_cpu_online, and close
the sched_exit race.

From: Ingo Molnar <mingo@elte.hu>

  fix a typo in a previous patch breaking RT scheduling & interactivity.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Ingo Molnar <mingo@elte.hu>

RT tasks are unlikely, move this into rt_task() instead of open-coding it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

 - fix two stale comments
 - cleanup
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Now that init_idle does not remove tasks from the runqueue, those
architectures that use kernel_thread instead of copy_process for the idle
task will break.  To fix, ensure that CLONE_IDLETASK tasks are not put on
the runqueue in the first place.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move balancing and child-runs-first logic from fork.c into sched.c where
it belongs.

* Consolidate wake_up_forked_process and wake_up_forked_thread into
  wake_up_new_process, and pass in clone_flags as suggested by Linus.  This
  removes a lot of code duplication and allows all logic to be handled in that
  function.

* Don't do balance-on-clone balancing for vfork'ed threads.

* Don't do set_task_cpu or balance one clone in wake_up_new_process. 
  Instead do it in sched_fork to fix set_cpus_allowed races.

* Don't do child-runs-first for CLONE_VM processes, as there is obviously no
  COW benifit to be had.  This is a big one, it enables Andi's workload to run
  well without clone balancing, because the OpenMP child threads can get
  balanced off to other nodes *before* they start running and allocating
  memory.

* Rename sched_balance_exec to sched_exec: hide the policy from the API.


From: Ingo Molnar <mingo@elte.hu>

  rename wake_up_new_process -> wake_up_new_task.

  in sched.c we are gradually moving away from the overloaded 'process' or
  'thread' notion to the traditional task (or context) naming.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Clean up init_idle to not use wake_up_forked_process, then undo all the stuff
that call does.  Instead, do everything in init_idle.

Make double_rq_lock depend on CONFIG_SMP because it is no longer used on UP.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The main benefit is that with the default HZ=1000 nice +19 tasks now get 5
msecs of timeslices, so the ratio of CPU use is linear.  (nice 0 task gets
20 times more CPU time than a nice 19 task.  Prior this change the ratio
was 1:10)

another effect is that nice 0 tasks now get a round 100 msecs of timeslices
(as intended), instead of 102 msecs.

here's a table of old/new timeslice values, for HZ=1000 and 100:

                      HZ=1000         (   HZ=100   )
                    old    new        ( old    new )

        nice -20:   200    200        ( 200    200 )
        nice -19:   195    195        ( 190    190 )
        ...
        nice 0:     102    100        ( 100    100 )
        nice 1:      97     95        (  90     90 )
        nice 2:      92     90        (  90     90 )
        ...
        nice 17:     19     15        (  10     10 )
        nice 18:     14     10        (  10     10 )
        nice 19:     10      5        (  10     10 )

i've tested the patch on x86.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch changes hose_list from a simple linked list to a
"list.h"-style list.  This is in preparation for the runtime
addition/removal of PCI Host Bridges.
Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On some platforms (notably power5) you can't enable surveillance
(firmware/service processor watchdog) from the kernel - you have to do
it in the firmware.

This patch changes enable_surveillance() to make the message that is
printed in this situation more informative.  Additionaly, the rtas_call
was changed to rtas_set_indicator so as to avoid having to handle
RTAS_BUSY returns.
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

The code doesn't actually _care_ about 32/64-bit issues,
only about F_SETLK vs F_SETLKW, and the F_SETLK64 doesn't
exist except as a compatibility thing on 64-bit architectures
(since the regular one already _is_ 64-bit, of course).

into fys.uio.no:/home/linux/bitkeeper/nfsclient-2.6

   server are not allowed to be interrupted as that may result in the
   client and server disagreeing.

   recall ability.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

   NFS4ERR_CB_PATH_DOWN error.

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

into fys.uio.no:/home/linux/bitkeeper/work/nfsclient-2.6

into fys.uio.no:/home/linux/bitkeeper/nfsclient-2.6

   rather than an inode argument. Fix up nfs_instantiate() and
   _nfs4_do_open to use this since doing a new lookup might be racy.

   NFS4ERR_DELAY on the GETATTR call.

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

   that hangs off filp->private_data. As a side effect, this also
   cleans up the NFSv4 private file state info.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

   operations by using a per-server read/write semaphore.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

   NFS4ERR_DELAY properly.
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

into fys.uio.no:/home/linux/bitkeeper/nfsclient-2.6

   call allows for the client to request that the mtime and/or atime
   of an inode be set to the current server time, the given (client)
   time, or not changed.  The set-to-current-server value is used
   when you run "touch file" on the client.

The NFSv2 RFC defines no such encoding for the sattr structure. 
   However Solaris and Irix machine obey a convention where passing
   the invalid value mtime.useconds=1000000 means "set both mtime and
   atime to the current server time".  The convention is documented
   in the book "NFS Illustrated" by Brent Callaghan.  The patch below
   implements this convention for the Linux client and server (hence
   multiple To:s).
Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

   listed as "the newer version ... of the NFS protocol". Obviously
   both can't be the newer version at the same time, so here's a
   patch to correct the text in such a way that only v4 is listed as
   the newer version. Patch is against 2.6.7-rc3 - please consider
   including it.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>

   file handle container, there is no longer any need to clear the
   file handle container before copying in a file handle.  This
   allows us to remove a 128 byte memset() from several hot paths.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@fys.uio.no>