When running 32-bit pvops-dom0 and a driver tries to allocate a coherent
DMA-memory the xen swiotlb-implementation returned memory beyond 4GB.

The underlaying reason is that if the supplied driver passes in a
DMA_BIT_MASK(64) ( hwdev->coherent_dma_mask is set to 0xffffffffffffffff)
our dma_mask will be u64 set to 0xffffffffffffffff even if we set it to
DMA_BIT_MASK(32) previously. Meaning we do not reset the upper bits.
By using the dma_alloc_coherent_mask function - it does the proper casting
and we get 0xfffffffff.

This caused not working sound on a system with 4 GB and a 64-bit
compatible sound-card with sets the DMA-mask to 64bit.

On bare-metal and the forward-ported xen-dom0 patches from OpenSuse a coherent
DMA-memory is always allocated inside the 32-bit address-range by calling
dma_alloc_coherent_mask.

This patch adds the same functionality to xen swiotlb and is a rebase of the
original patch from Ronny Hegewald which never got upstream b/c the
underlaying reason was not understood until now.

The original email with the original patch is in:
http://old-list-archives.xen.org/archives/html/xen-devel/2010-02/msg00038.html
the original thread from where the discussion started is in:
http://old-list-archives.xen.org/archives/html/xen-devel/2010-01/msg00928.htmlSigned-off-by: Ronny Hegewald <ronny.hegewald@online.de>
Signed-off-by: Stefano Panella <stefano.panella@citrix.com>
Acked-By: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: stable@vger.kernel.org

While TLB_FLUSH_ALL gets passed as 'end' argument to
flush_tlb_others(), the Xen code was made to check its 'start'
parameter. That may give a incorrect op.cmd to MMUEXT_INVLPG_MULTI
instead of MMUEXT_TLB_FLUSH_MULTI. Then it causes some page can not
be flushed from TLB.

This patch fixed this issue.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Yongjie Ren <yongjie.ren@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* commit '4cb38750': (6849 commits)
  bcma: fix invalid PMU chip control masks
  [libata] pata_cmd64x: whitespace cleanup
  libata-acpi: fix up for acpi_pm_device_sleep_state API
  sata_dwc_460ex: device tree may specify dma_channel
  ahci, trivial: fixed coding style issues related to braces
  ahci_platform: add hibernation callbacks
  libata-eh.c: local functions should not be exposed globally
  libata-transport.c: local functions should not be exposed globally
  sata_dwc_460ex: support hardreset
  ata: use module_pci_driver
  drivers/ata/pata_pcmcia.c: adjust suspicious bit operation
  pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare
  ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2
  [libata] Prevent interface errors with Seagate FreeAgent GoFlex
  drivers/acpi/glue: revert accidental license-related 6b66d958 bits
  libata-acpi: add missing inlines in libata.h
  i2c-omap: Add support for I2C_M_STOP message flag
  i2c: Fall back to emulated SMBus if the operation isn't supported natively
  i2c: Add SCCB support
  i2c-tiny-usb: Add support for the Robofuzz OSIF USB/I2C converter
  ...

We would traverse the full P2M top directory (from 0->MAX_DOMAIN_PAGES
inclusive) when trying to figure out whether we can re-use some of the
P2M middle leafs.

Which meant that if the kernel was compiled with MAX_DOMAIN_PAGES=512
we would try to use the 512th entry. Fortunately for us the p2m_top_index
has a check for this:

 BUG_ON(pfn >= MAX_P2M_PFN);

which we hit and saw this:

(XEN) domain_crash_sync called from entry.S
(XEN) Domain 0 (vcpu#0) crashed on cpu#0:
(XEN) ----[ Xen-4.1.2-OVM  x86_64  debug=n  Tainted:    C ]----
(XEN) CPU:    0
(XEN) RIP:    e033:[<ffffffff819cadeb>]
(XEN) RFLAGS: 0000000000000212   EM: 1   CONTEXT: pv guest
(XEN) rax: ffffffff81db5000   rbx: ffffffff81db4000   rcx: 0000000000000000
(XEN) rdx: 0000000000480211   rsi: 0000000000000000   rdi: ffffffff81db4000
(XEN) rbp: ffffffff81793db8   rsp: ffffffff81793d38   r8:  0000000008000000
(XEN) r9:  4000000000000000   r10: 0000000000000000   r11: ffffffff81db7000
(XEN) r12: 0000000000000ff8   r13: ffffffff81df1ff8   r14: ffffffff81db6000
(XEN) r15: 0000000000000ff8   cr0: 000000008005003b   cr4: 00000000000026f0
(XEN) cr3: 0000000661795000   cr2: 0000000000000000

Fixes-Oracle-Bug: 14570662
CC: stable@vger.kernel.org # only for v3.5
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When we are finished with return PFNs to the hypervisor, then
populate it back, and also mark the E820 MMIO and E820 gaps
as IDENTITY_FRAMEs, we then call P2M to set areas that can
be used for ballooning. We were off by one, and ended up
over-writting a P2M entry that most likely was an IDENTITY_FRAME.
For example:

1-1 mapping on 40000->40200
1-1 mapping on bc558->bc5ac
1-1 mapping on bc5b4->bc8c5
1-1 mapping on bc8c6->bcb7c
1-1 mapping on bcd00->100000
Released 614 pages of unused memory
Set 277889 page(s) to 1-1 mapping
Populating 40200-40466 pfn range: 614 pages added

=> here we set from 40466 up to bc559 P2M tree to be
INVALID_P2M_ENTRY. We should have done it up to bc558.

The end result is that if anybody is trying to construct
a PTE for PFN bc558 they end up with ~PAGE_PRESENT.

CC: stable@vger.kernel.org
Reported-by-and-Tested-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If P2M leaf is completly packed with INVALID_P2M_ENTRY or with
1:1 PFNs (so IDENTITY_FRAME type PFNs), we can swap the P2M leaf
with either a p2m_missing or p2m_identity respectively. The old
page (which was created via extend_brk or was grafted on from the
mfn_list) can be re-used for setting new PFNs.

This also means we can remove git commit:
5bc6f988
xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back
which tried to fix this.

and make the amount that is required to be reserved much smaller.

CC: stable@vger.kernel.org # for 3.5 only.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This reverts commit 00e37bdb.

During shutdown of PVHVM guests with more than 2VCPUs on certain
machines we can hit the race where the replaced shared_info is not
replaced fast enough and the PV time clock retries reading the same
area over and over without any any success and is stuck in an
infinite loop.
Acked-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When we release pages back during bootup:

Freeing  9d-100 pfn range: 99 pages freed
Freeing  9cf36-9d0d2 pfn range: 412 pages freed
Freeing  9f6bd-9f6bf pfn range: 2 pages freed
Freeing  9f714-9f7bf pfn range: 171 pages freed
Freeing  9f7e0-9f7ff pfn range: 31 pages freed
Freeing  9f800-100000 pfn range: 395264 pages freed
Released 395979 pages of unused memory

We then try to populate those pages back. In the P2M tree however
the space for those leafs must be reserved - as such we use extend_brk.
We reserve 8MB of _brk space, which means we can fit over
1048576 PFNs - which is more than we should ever need.

Without this, on certain compilation of the kernel we would hit:

(XEN) domain_crash_sync called from entry.S
(XEN) CPU:    0
(XEN) RIP:    e033:[<ffffffff818aad3b>]
(XEN) RFLAGS: 0000000000000206   EM: 1   CONTEXT: pv guest
(XEN) rax: ffffffff81a7c000   rbx: 000000000000003d   rcx: 0000000000001000
(XEN) rdx: ffffffff81a7b000   rsi: 0000000000001000   rdi: 0000000000001000
(XEN) rbp: ffffffff81801cd8   rsp: ffffffff81801c98   r8:  0000000000100000
(XEN) r9:  ffffffff81a7a000   r10: 0000000000000001   r11: 0000000000000003
(XEN) r12: 0000000000000004   r13: 0000000000000004   r14: 000000000000003d
(XEN) r15: 00000000000001e8   cr0: 000000008005003b   cr4: 00000000000006f0
(XEN) cr3: 0000000125803000   cr2: 0000000000000000
(XEN) ds: 0000   es: 0000   fs: 0000   gs: 0000   ss: e02b   cs: e033
(XEN) Guest stack trace from rsp=ffffffff81801c98:

.. which is extend_brk hitting a BUG_ON.

Interestingly enough, most of the time we are not going to hit this
b/c the _brk space is quite large (v3.5):
 ffffffff81a25000 B __brk_base
 ffffffff81e43000 B __brk_limit
= ~4MB.

vs earlier kernels (with this back-ported), the space is smaller:
 ffffffff81a25000 B __brk_base
 ffffffff81a7b000 B __brk_limit
= 344 kBytes.

where we would certainly hit this and hit extend_brk.

Note that git commit c3d93f88
(xen: populate correct number of pages when across mem boundary (v2))
exposed this bug).

[v1: Made it 8MB of _brk space instead of 4MB per Jan's suggestion]

CC: stable@vger.kernel.org #only for 3.5
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Pull x86/mm changes from Peter Anvin:
 "The big change here is the patchset by Alex Shi to use INVLPG to flush
  only the affected pages when we only need to flush a small page range.

  It also removes the special INVALIDATE_TLB_VECTOR interrupts (32
  vectors!) and replace it with an ordinary IPI function call."

Fix up trivial conflicts in arch/x86/include/asm/apic.h (added code next
to changed line)

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tlb: Fix build warning and crash when building for !SMP
  x86/tlb: do flush_tlb_kernel_range by 'invlpg'
  x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR
  x86/tlb: enable tlb flush range support for x86
  mm/mmu_gather: enable tlb flush range in generic mmu_gather
  x86/tlb: add tlb_flushall_shift knob into debugfs
  x86/tlb: add tlb_flushall_shift for specific CPU
  x86/tlb: fall back to flush all when meet a THP large page
  x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range
  x86/tlb_info: get last level TLB entry number of CPU
  x86: Add read_mostly declaration/definition to variables from smp.h
  x86: Define early read-mostly per-cpu macros

Pul x86/efi changes from Ingo Molnar:
 "This tree adds an EFI bootloader handover protocol, which, once
  supported on the bootloader side, will make bootup faster and might
  result in simpler bootloaders.

  The other change activates the EFI wall clock time accessors on x86-64
  as well, instead of the legacy RTC readout."

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Handover Protocol
  x86-64/efi: Use EFI to deal with platform wall clock

Merge branches 'x86-cleanups-for-linus' and 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 cleanup and cpufeature from Ingo Molnar:
 "Just a single cleanup and and a commit that adds new CPU feature
  names"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Remove ancient, unconditionally #ifdef'd out dead code

* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpufeature: Add the RDSEED and ADX features

Pull x86/boot changes from Ingo Molnar:
 "Kernel image size reduction and assorted fixes and other small
  improvements."

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, doc: Assign a bootloader ID for "Minimal Linux Bootloader"
  x86, boot: Exclude cmdline.c if you can't use it
  x86, boot: Exclude early_serial_console.c if can't use it.
  x86, boot: Removed unused debug flag and set code
  x86, boot: Switch output functions from command-line flags to conditional compilation
  x86, boot: Changed error putstr path to match new debug_putstr format
  x86, boot: Wrap debug printing in a new debug_putstr function
  x86, boot: Removed quiet flag and switched quiet output to debug flag

Pull scheduler changes from Ingo Molnar:
 "The biggest change is a performance improvement on SMP systems:

  | 4 socket 40 core + SMT Westmere box, single 30 sec tbench
  | runs, higher is better:
  |
  | clients     1       2       4        8       16       32       64      128
  |..........................................................................
  | pre        30      41     118      645     3769     6214    12233    14312
  | post      299     603    1211     2418     4697     6847    11606    14557
  |
  | A nice increase in performance.

  which speedup is particularly noticeable on heavily interacting
  few-tasks workloads, so the changes should help desktop-style Xorg
  workloads and interactivity as well, on multi-core CPUs.

  There are also cpuset suspend behavior fixes/restructuring and various
  smaller tweaks."

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix race in task_group()
  sched: Improve balance_cpu() to consider other cpus in its group as target of (pinned) task
  sched: Reset loop counters if all tasks are pinned and we need to redo load balance
  sched: Reorder 'struct lb_env' members to reduce its size
  sched: Improve scalability via 'CPU buddies', which withstand random perturbations
  cpusets: Remove/update outdated comments
  cpusets, hotplug: Restructure functions that are invoked during hotplug
  cpusets, hotplug: Implement cpuset tree traversal in a helper function
  CPU hotplug, cpusets, suspend: Don't modify cpusets during suspend/resume
  sched/x86: Remove broken power estimation

Pull crypto updates from Herbert Xu:

 - Fixed algorithm construction hang when self-test fails.
 - Added SHA variants to talitos AEAD list.
 - New driver for Exynos random number generator.
 - Performance enhancements for arc4.
 - Added hwrng support to caam.
 - Added ahash support to caam.
 - Fixed bad kfree in aesni-intel.
 - Allow aesni-intel in FIPS mode.
 - Added atmel driver with support for AES/3DES/SHA.
 - Bug fixes for mv_cesa.
 - CRC hardware driver for BF60x family processors.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits)
  crypto: twofish-avx - remove useless instruction
  crypto: testmgr - add aead cbc aes hmac sha1,256,512 test vectors
  crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms
  crypto: talitos - export the talitos_submit function
  crypto: talitos - move talitos structures to header file
  crypto: atmel - add new tests to tcrypt
  crypto: atmel - add Atmel SHA1/SHA256 driver
  crypto: atmel - add Atmel DES/TDES driver
  crypto: atmel - add Atmel AES driver
  ARM: AT91SAM9G45: add crypto peripherals
  crypto: testmgr - allow aesni-intel and ghash_clmulni-intel in fips mode
  hwrng: exynos - Add support for Exynos random number generator
  crypto: aesni-intel - fix wrong kfree pointer
  crypto: caam - ERA retrieval and printing for SEC device
  crypto: caam - Using alloc_coherent for caam job rings
  crypto: algapi - Fix hang on crypto allocation
  crypto: arc4 - now arc needs blockcipher support
  crypto: caam - one tasklet per job ring
  crypto: caam - consolidate memory barriers from job ring en/dequeue
  crypto: caam - only query h/w in job ring dequeue path
  ...

Pull input layer updates from Dmitry Torokhov:
 "First set of updates for the input subsystem.  You will get a new
  touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx
  SoC, large update to Atmel mXT touchscreen driver, a lot of drivers
  acquired device tree support and a slew of other fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: add MELFAS mms114 touchscreen driver
  Input: add support for key scan interface of the LPC32xx SoC
  Input: omap4-keypad - add device tree support
  Input: hanwang - add support for Art Master II tablet
  Input: spear_keyboard - reconfigure operating frequency on suspend
  Input: spear_keyboard - fix clock handling during suspend/resume
  Input: ff-memless - fix a couple min_t() casts
  Input: synaptics - print firmware ID and board number at init
  Input: spear_keyboard - generalize keyboard frequency configuration
  Input: spear_keyboard - rename bit definitions to reflect register
  Input: spear_keyboard - use correct io accessors
  Input: spear-keyboard - fix disable device_init_wakeup in remove
  Input: wacom_i2c - fix compiler warning
  Input: imx_keypad - check error returned by clk_prepare_enable()
  Input: imx_keypad - adapt the new kpp clock name
  Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare()
  Input: ad7879 - add option to correct xy axis
  Input: synaptics_usb - Remove TrackPoint name trailing whitespace
  Revert "Input: atmel_mxt_ts - warn if sysfs could not be created"
  Input: MT - Include win8 support
  ...

Pull spi updates from Mark Brown:
 "Since Grant is even more specacularly busy than usual for the time
  being I've been collecting SPI patches for him for this release -
  probably things will revert back to Grant before the next release.

  There's nothing too exciting here, mostly it's simple driver specific
  stuff:

   - Add spi: to the modaliases of SPI devices to provide namespacing.
   - A driver for AD-FMCOMMS1-EBZ.
   - DT binding for Orion.
   - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers.

   There may be a few more fixes I've missed, people keep sending me new
   things."

* tag 'spi-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/orion: remove uneeded spi_info
  spi/bcm63xx: fix clock configuration selection
  spi/orion: add device tree binding
  spi/omap2: mark omap2_mcspi_master_setup as __devinit
  spi: omap2-mcspi: Fix the below warning
  spi: Add AD-FMCOMMS1-EBZ I2C-SPI bridge driver
  spi/imx: use gpio_is_valid to determine if a gpio is valid
  spi/imx: remove redundant config.speed_hz setting
  spi/gpio: start with CS non-active
  spi: tegra: use dmaengine based dma driver
  spi/pl022: cleanup pl022 header documentation
  spi/pl022: enable runtime PM
  spi/pl022: delete DB5500 support
  spi/pl022: disable port when unused
  spi: Add "spi:" prefix to modalias attribute of spi devices

Commit b9562545 ("bcma: complete workaround for BCMA43224 and
BCM4313") introduced the wrong masks for setting the chip control
registers - the "mask" parameter is inverse.

It should be the mask of bits *not* changed, which is admittedly a bit
non-intuitive.

The incorrect mask not only causes the driver to not work correctly on
the chips affected (eg the BCM43224 on the Macbook Air 4,2) but the
state persists over a soft reset, causing the next boot to not
necessarily see the device correctly.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Arend Van Spriel <arend@broadcom.com>
Cc: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull char/misc patches from Greg Kroah-Hartman:
 "Here's the "big" pull request for 3.6-rc1 for the char/misc drivers.

  It's really just a few updates to the mei driver, plus 4 other tiny
  patches, nothing big at all.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: use module_pci_driver
  powerpc/BSR: cleanup the error path of bsr_init
  mei: mei_irq_thread_write_handler - line break fix
  mei: streamline the _mei_irq_thread_close/ioctol functions
  mei: introduce mei_data2slots wrapper
  mei: mei_wd_host_init: update the comment
  mei: remove write only wariable wd_due_counter
  mei: mei_device can be const for mei register access functions
  mei: revamp host buffer interface function
  mei: don't query HCSR for host buffer depth
  mei: group wd_interface_reg with watchdog variables within struct mei_device
  mei: mei_irq_thread_write_handler check for overflow
  mei: make mei_write_message more readable
  mei: check for error codes that mei_flow_ctrl_creds retuns
  misc: at25: Parse dt settings
  misc: hpilo: increase number of max supported channels
  mei: mei.txt: minor grammar fixes

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...

Pull staging tree patches from Greg Kroah-Hartman:
 "Here's the big staging tree merge for the 3.6-rc1 merge window.

  There are some patches in here outside of drivers/staging/, notibly
  the iio code (which is still stradeling the staging / not staging
  boundry), the pstore code, and the tracing code.  All of these have
  gotten acks from the various subsystem maintainers to be included in
  this tree.  The pstore and tracing patches are related, and are coming
  here as they replace one of the android staging drivers.

  Otherwise, the normal staging mess.  Lots of cleanups and a few new
  drivers (some iio drivers, and the large csr wireless driver
  abomination.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up trivial conflicts in drivers/staging/comedi/drivers/s626.h and
drivers/staging/gdm72xx/netlink_k.c

* tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1108 commits)
  staging: csr: delete a bunch of unused library functions
  staging: csr: remove csr_utf16.c
  staging: csr: remove csr_pmem.h
  staging: csr: remove CsrPmemAlloc
  staging: csr: remove CsrPmemFree()
  staging: csr: remove CsrMemAllocDma()
  staging: csr: remove CsrMemCalloc()
  staging: csr: remove CsrMemAlloc()
  staging: csr: remove CsrMemFree() and CsrMemFreeDma()
  staging: csr: remove csr_util.h
  staging: csr: remove CsrOffSetOf()
  stating: csr: remove unneeded #includes in csr_util.c
  staging: csr: make CsrUInt16ToHex static
  staging: csr: remove CsrMemCpy()
  staging: csr: remove CsrStrLen()
  staging: csr: remove CsrVsnprintf()
  staging: csr: remove CsrStrDup
  staging: csr: remove CsrStrChr()
  staging: csr: remove CsrStrNCmp
  staging: csr: remove CsrStrCmp
  ...

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB patch set for the 3.6-rc1 merge window.

  Lots of little changes in here, primarily for gadget controllers and
  drivers.  There's some scsi changes that I think also went in through
  the scsi tree, but they merge just fine.  All of these patches have
  been in the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up trivial conflicts in include/scsi/scsi_device.h (same libata
conflict that Jeff had already encountered)

* tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  usb: Add quirk detection based on interface information
  usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  USB: notify phy when root hub port connect change
  USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds
  USB: option: add ZTE MF821D
  USB: sierra: QMI mode MC7710 moved to qcserial
  USB: qcserial: adding Sierra Wireless devices
  USB: qcserial: support generic Qualcomm serial ports
  USB: qcserial: make probe more flexible
  USB: qcserial: centralize probe exit path
  USB: qcserial: consolidate usb_set_interface calls
  USB: ehci-s5p: Add support for device tree
  USB: ohci-exynos: Add support for device tree
  USB: ehci-omap: fix compile failure(v1)
  usb: host: tegra: pass correct pointer in ehci_setup()
  USB: ehci-fsl: Update ifdef check to work on 64-bit ppc
  USB: serial: keyspan: Removed unrequired parentheses.
  ...

Pull libata updates from Jeff Garzik:
 "Notable changes:

   - Updating libata to directly bind with ACPI / runtime power mgmt.
     This is a pre-req for SATA ZPODD (CD-ROM power management).

     Touches ACPI (exports++) and SCSI in minor ways.  Has been in
     linux-next for weeks.

     The rest of this should come via SCSI tree, as it involves a lot of
     updates to the 'sr' driver etc.

  Other, minor changes:

   - module_pci_driver() removes a lot of common boilerplate from each
     PCI driver

   - minor coding style, whitespace cleanups

   - pata_pcmcia bug fix, caught by Coccinelle

   - pata_imx, sata_dwc_460ex minor vendor updates

   - ahci_platform: use simple PM ops, and thereby add hibernation cb's

   - Add a few device-specific quirks"

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (23 commits)
  [libata] pata_cmd64x: whitespace cleanup
  libata-acpi: fix up for acpi_pm_device_sleep_state API
  sata_dwc_460ex: device tree may specify dma_channel
  ahci, trivial: fixed coding style issues related to braces
  ahci_platform: add hibernation callbacks
  libata-eh.c: local functions should not be exposed globally
  libata-transport.c: local functions should not be exposed globally
  sata_dwc_460ex: support hardreset
  ata: use module_pci_driver
  drivers/ata/pata_pcmcia.c: adjust suspicious bit operation
  pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare
  ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2
  [libata] Prevent interface errors with Seagate FreeAgent GoFlex
  drivers/acpi/glue: revert accidental license-related 6b66d958 bits
  libata-acpi: add missing inlines in libata.h
  libata: tell scsi layer device supports runtime power off
  libata: detect Device Attention support
  libata-acpi: register/unregister device to/from power resource
  libata-acpi: add ata port runtime D3Cold support
  libata-acpi: set acpi state for SATA port
  ...

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

After merging the libata tree, today's [2012-07-01] linux-next build (x86_64
allmodconfig) failed like this:

drivers/ata/libata-acpi.c: In function 'ata_acpi_set_state':
drivers/ata/libata-acpi.c:872:5: error: too few arguments to function 'acpi_pm_device_sleep_state'
include/acpi/acpi_bus.h:418:5: note: declared here

Caused by commit 3bd46600 ("libata-acpi: add ata port runtime D3Cold
support") from the libata tree interacting with commit ee85f543
("ACPI/PM: specify lowest allowed state for device sleep state") from the
pci tree.

This patch adds ACPI_STATE_D3 as the new third parameter to
acpi_pm_device_sleep_state()
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Two bits were appended to the end of the bitfield
list in struct scsi_device.  Resolve that conflict
by including both bits.

Conflicts:
	include/scsi/scsi_device.h

Only channel 0 is currently support and the driver code is fixed on
channel 0. This patch lets device node specifying dma-channel in case
it is not 0. If no dma-channel property is specified, channel 0 is
used as default.
Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Fixed coding style issues related to braces found
by checkpatch.pl in drivers/ata/ahci.c
Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Use existing suspend, resume implementation for hibernation callbacks.
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The function ata_ering_clear_cb is only referenced in this file and
should be marked static to prevent it from being exposed globally.

This quiets the sparse warning:

warning: symbol 'ata_ering_clear_cb' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Functions not referenced outside of a source file should be marked
static to prevent it from being exposed globally.

This quiets the sparse warnings:

warning: symbol 'ata_is_port' was not declared. Should it be static?
warning: symbol 'ata_is_link' was not declared. Should it be static?
warning: symbol 'ata_is_ata_dev' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The hardreset operation is currently not supported. This causes
sometime the SATA driver does cause kernel crash because of
none-determined state.a This patch will fix the issue.
Signed-off-by: Thang Q. Nguyen <tqnguyen@apm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This patch converts the drivers in drivers/ata/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Mikael Pettersson <mikpe@it.uu.se>
Cc: Mark Lord <kernel@teksavvy.com>
Cc: Jeremy Higdon <jeremy@sgi.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

IO_DATA_PATH_WIDTH_8 is 0, so a bit-and with it is always false.  The
value IO_DATA_PATH_WIDTH covers the bits of the IO_DATA_PATH constants, so
first pick those bits and then make the test using !=.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

With the new i.mx clock framework, we need to use
clk_prepare_enable/clk_disable_unprepare.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Like e65cc194 (ahci: Enable SB600 64bit
DMA on MSI K9A2 Platinum) and 3c4aa91f
(ahci: Enable SB600 64bit DMA on Asus M3A), this patch enables 64bit DMA
for the AHCI SATA controller of another board that has the SB600
southbridge.

In this case though we're enabling 64bit DMA for another MSI motherboard,
the K9AGM2 or MS-7327. It is new enough that all of the BIOS releases
since the initial release (1.0 from 2007-02-09) work correctly with 64bit
DMA enabled.
Signed-off-by: Mark Nelson <mdnelson8@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure,
interface errors are always seen until 1.5Gbps is negotiated [1]. This
occurs using any disk in the enclosure, and when the disk is connected
directly with a generic passive eSATAp cable, we see stable 3Gbps
operation as expected.

Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset
and renegotiation incurs.
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Commit 6b66d958 should not have changed
EXPORT_SYMBOL_GPL to EXPORT_SYMBOL.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Adds inline for ata_acpi_unregister/ata_acpi_bind/ata_acpi_unbind
in drivers/ata/libata.h for !CONFIG_ATA_ACPI to fix below warnings.

warning: 'ata_acpi_unregister' defined but not used [-Wunused-function]
warning: 'ata_acpi_bind' defined but not used [-Wunused-function]
warning: 'ata_acpi_unbind' defined but not used [-Wunused-function]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Pull first round of SCSI updates from James Bottomley:
 "The most important feature of this patch set is the new async
  infrastructure that makes sure async_synchronize_full() synchronizes
  all domains and allows us to remove all the hacks (like having
  scsi_complete_async_scans() in the device base code) and means that
  the async infrastructure will "just work" in future.

  The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi,
  megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure
  work in sas and FC.

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
  [SCSI] Revert "[SCSI] fix async probe regression"
  [SCSI] cleanup usages of scsi_complete_async_scans
  [SCSI] queue async scan work to an async_schedule domain
  [SCSI] async: make async_synchronize_full() flush all work regardless of domain
  [SCSI] async: introduce 'async_domain' type
  [SCSI] bfa: Fix to set correct return error codes and misc cleanup.
  [SCSI] aacraid: Series 7 Async. (performance) mode support
  [SCSI] aha152x: Allow use on 64bit systems
  [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning
  [SCSI] bfa: squelch lockdep complaint with a spin_lock_init
  [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP
  [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP
  [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED
  [SCSI] ufs: reverse the ufshcd_is_device_present logic
  [SCSI] ufs: use module_pci_driver
  [SCSI] usb-storage: update usb devices for write cache quirk in quirk list.
  [SCSI] usb-storage: add support for write cache quirk
  [SCSI] set to WCE if usb cache quirk is present.
  [SCSI] virtio-scsi: hotplug support for virtio-scsi
  [SCSI] virtio-scsi: split scatterlist per target
  ...