Adding Thumb2 support to the runtime patching of the virt_to_phys and
phys_to_virt opcodes.

Tested both the 8-bit and the 16-bit fixups, using different placements
in memory to exercize all code paths.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Loading Thumb-2 modules into an ARM kernel or vice-versa isn't
guaranteed to work safely, since the kernel is not interworking-
aware everywhere.

This patch adds "thumb2" to the module vermagic when
CONFIG_THUMB2_KERNEL is enabled, to help avoid accidental loading
of modules into the wrong kernel.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The initial MMU table created in head.S contains a 1 MB mapping at the
start of memory to let the early kernel boot code access the boot params
specified by mdesc->boot_params.

When using CONFIG_ARM_PATCH_PHYS_VIRT it is possible for the kernel to
have a different idea of where the start of memory is at run time, making
the compile-time determined mdesc->boot_params pointing to a memory area
which is not mapped.  Any access to the boot params in that case will
fault and silently hang the kernel at that point.  It is therefore a
better idea to simply ignore mdesc->boot_params in that case and give
the kernel a chance to print some diagnostic on the console later.

If the bootloader provides a valid pointer in r2 to the kernel then this
is used instead of mdesc->boot_params, and an explicit mapping is already
created in the initial MMU table for it.  It is therefore a good idea to
use that facility when using a relocated kernel.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Since commit 6fc31d54 there is no callers for lookup_machine_type()
other than setup_machine(). And if the former fails it won't return,
therefore the error path in the later is dead code.  Let's clean
things up by merging them together.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The unsigned long datatype is not sufficient for mapping physical addresses
>= 4GB.

This patch ensures that the address conversion code in asm/memory.h casts
to the correct type when handling physical addresses. The internal v2p
macros only deal with lowmem addresses, so these do not need to be modified.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

If ATAGs or DTB pointer is not within first 1MB of RAM, then the boot params
will not be mapped early enough, so map the 1MB region that r2 points to. Only
map the first 1MB when r2 is 0.

Some assembly improvements from Nicolas Pitre.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

MSM's memory is aligned to 2MB, which is more than we can do with our
existing method as we're limited to the upper 8 bits.  Extend this by
using two instructions to 16 bits, automatically selected when MSM is
enabled.
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This idea came from Nicolas, Eric Miao produced an initial version,
which was then rewritten into this.

Patch the physical to virtual translations at runtime.  As we modify
the code, this makes it incompatible with XIP kernels, but allows us
to achieve this with minimal loss of performance.

As many translations are of the form:

	physical = virtual + (PHYS_OFFSET - PAGE_OFFSET)
	virtual = physical - (PHYS_OFFSET - PAGE_OFFSET)

we generate an 'add' instruction for __virt_to_phys(), and a 'sub'
instruction for __phys_to_virt().  We calculate at run time (PHYS_OFFSET
- PAGE_OFFSET) by comparing the address prior to MMU initialization with
where it should be once the MMU has been initialized, and place this
constant into the above add/sub instructions.

Once we have (PHYS_OFFSET - PAGE_OFFSET), we can calculate the real
PHYS_OFFSET as PAGE_OFFSET is a build-time constant, and save this for
the C-mode PHYS_OFFSET variable definition to use.

At present, we are unable to support Realview with Sparsemem enabled
as this uses a complex mapping function, and MSM as this requires a
constant which will not fit in our math instruction.

Add a module version magic string for this feature to prevent
incompatible modules being loaded.
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

These are needed for CONFIG_ARM_PATCH_PHYS_VIRT to work.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

head.S makes use of PHYS_OFFSET.  When it becomes a variable, the
assembler won't understand this.  Compute PHYS_OFFSET by the following
method.  This code is linked at its virtual address, but run at before
the MMU is enabled, so at his physical address.

1:	.long	.
	.long	PAGE_OFFSET

	adr	r0, 1b		@ r0 = physical ','
	ldmia	r0, {r1, r2}	@ r1 = virtual '.', r2 = PAGE_OFFSET
	sub	r1, r0, r1	@ r1 = physical-virtual
	add	r2, r2, r1	@ r2 = PAGE_OFFSET + physical-virtual
				@    := PHYS_OFFSET.

Switch XIP users of PHYS_OFFSET to use PLAT_PHYS_OFFSET - we can't
use this method for XIP kernels as the code doesn't execute in RAM.
Tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

As PHYS_OFFSET will be becoming a variable, we can't have it used in
initializers nor assembly code.  Replace those in generic code with
a run-time initialization.  Replace those in platform code using the
individual platform specific PLAT_PHYS_OFFSET.
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This uncouple PHYS_OFFSET from the platform definitions, thereby
facilitating run-time computation of the physical memory offset.
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Magnus Damm <damm@opensource.se>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Jiandong Zheng <jdzheng@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Since the debug macros no longer depend on the machine type information,
the machine type lookup can be deferred to setup_arch() in setup.c which
simplifies the code somewhat.

We also move the __error_a functionality into setup.c for displaying a
message when a bad machine ID is passed to the kernel via the LL debug
code.  We also log this into the kernel ring buffer which makes it
possible to retrieve the message via a debugger.

Original idea from Grant Likely.
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: NFSv4 readdir loses entries
  NFS: Micro-optimize nfs4_decode_dirent()
  NFS: Fix an NFS client lockdep issue
  NFS construct consistent co_ownerid for v4.1
  NFS: nfs_wcc_update_inode() should set nfsi->attr_gencount
  NFS improve pnfs_put_deviceid_cache debug print
  NFS fix cb_sequence error processing
  NFS do not find client in NFSv4 pg_authenticate
  NLM: Fix "kernel BUG at fs/lockd/host.c:417!" or ".../host.c:283!"
  NFS: Prevent memory allocation failure in nfsacl_encode()
  NFS: nfsacl_{encode,decode} should return signed integer
  NFS: Fix "kernel BUG at fs/nfs/nfs3xdr.c:1338!"
  NFS: Fix "kernel BUG at fs/aio.c:554!"
  NFS4: Avoid potential NULL pointer dereference in decode_and_add_ds().
  NFS: fix handling of malloc failure during nfs_flush_multi()

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: smp_on_up: allow non-ARM SMP processors
  ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
  ARM: initrd: disable initrd if passed address overlaps reserved region
  ARM: footbridge: fix debug macros
  ARM: mmci: round down the bytes transferred on error
  ARM: mmci: complete the transaction on error
  ARM: 6642/1: mmci: calculate remaining bytes at error correctly

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
  arm: omap2: mux: fix compile warning
  omap1: Simplify use of omap_irq_flags
  omap2+: Fix unused variable warning for omap_irq_base

Fix kernel-doc warning in kernel.h from commit 7ef88ad5
("BUILD_BUG_ON: make it handle more cases"):

  Warning(include/linux/kernel.h:605): No description found for parameter 'condition'
  Warning(include/linux/kernel.h:605): Excess function parameter 'cond' description in 'BUILD_BUG_ON'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: xfs_bmap_add_extent_delay_real should init br_startblock
  xfs: fix dquot shaker deadlock
  xfs: handle CIl transaction commit failures correctly
  xfs: limit extsize to size of AGs and/or MAXEXTLEN
  xfs: prevent extsize alignment from exceeding maximum extent size
  xfs: limit extent length for allocation to AG size
  xfs: speculative delayed allocation uses rounddown_power_of_2 badly
  xfs: fix efi item leak on forced shutdown
  xfs: fix log ticket leak on forced shutdown.

Patches should keep coming through Rusty but it helps if I'm Cc'd as
well.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
  usb: gadget: composite: avoid access beyond array max length
  USB: serial: handle Data Carrier Detect changes
  USB: gadget: Fix endpoint representation in ci13xxx_udc
  USB: gadget: Fix error path in ci13xxx_udc gadget probe function
  usb: pch_udc: Fix the worning log issue at gadget driver remove
  USB: serial: Updated support for ICOM devices
  USB: ehci-mxc: add work-around for efika mx/sb bug
  USB: unbreak ehci-mxc on otg port of i.MX27
  drivers: update to pl2303 usb-serial to support Motorola cables
  USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
  USB serial: add missing .usb_driver field in serial drivers
  USB: ehci-fsl: Fix 'have_sysif_regs' detection
  USB: g_printer: fix bug in module parameter definitions
  USB: g_printer: fix bug in unregistration
  USB: uss720: remove duplicate USB device
  MAINTAINERS: add ueagle-atm entry
  USB: EHCI: fix DMA deallocation bug
  USB: pch_udc: support new device ML7213 IOH
  usb: pch_udc: Fixed issue which does not work with g_serial
  usb: set ep_dev async suspend should be later than device_initialize
  ...

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
  staging: r8712u: Add new device IDs
  staging: brcm80211: fix suspend/resume issue in brcmsmac
  staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
  Staging: iio: Aditional fixpoint formatted output bugfix
  staging: usbip: vhci: use urb->dev->portnum to find port
  staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
  staging: usbip: vhci: friendly log messages for connection errors
  staging: usbip: vhci: refuse to enqueue for dead connections
  staging: usbip: vhci: give back URBs from in-flight unlink requests
  staging: usbip: vhci: update reference count for usb_device
  staging: usbip: stub: update refcounts for devices and interfaces
  staging: tidspbridge: replace mbox callback with notifier_call
  staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
  Staging: speakup: &&/|| confusion in silent_store()
  iio: Fixpoint formatted output bugfix
  staging: rt2860: Fix incorrect netif_stop_queue usage warning
  staging: r8712u: Fix memory leak in firmware loading
  staging: tidspbridge: configure full L1 MMU range
  staging: rt2870sta: Add ID for Linksys WUSB100v2
  Staging: xgfib: put parenthesis in the right place
  ...

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/serial: fix apbuart build
  n_hdlc: fix read and write locking
  serial: unbreak billionton CF card
  tty: use for_each_console() and WARN() on sysfs failures
  vt: fix issue when fbcon wants to takeover a second time.

Fix up trivial conflict in drivers/tty/tty_io.c

Allow non-ARM SMP processors to use the SMP_ON_UP feature.  CPUs
supporting SMP must have the new CPU ID format, so check for this first.
Then check for ARM11MPCore, which fails the MPIDR check.  Lastly check
the MPIDR reports multiprocessing extensions and that the CPU is part of
a multiprocessing system.

Cc: <stable@kernel.org>
Reported-and-Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Ensure that the ISA/PCI IO space accessors are properly ordered on
ARMv6+ architectures.  These should always be ordered with respect to
all other accesses.

This also fixes __iormb() and __iowmb() not being visible to ioread/
iowrite if a platform defines its own MMIO accessors.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Disable the initrd if the passed address already overlaps the reserved
region.  This avoids oopses on Netwinders when NeTTrom tells the kernel
that an initrd is located at mem+4MB, but this overlaps the BSS,
resulting in the kernels in-use BSS being freed.

This should be applied to v2.6.37-stable.

Cc: <stable@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

0ea12930 (arm: return both physical and virtual addresses from addruart)
changed the way the 'addruart' worked, making it return both the virt
and phys addresses.  Unfortunately, for footbridge, these were reversed.
Fix that.  Tested on Netwinder.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

We should not report incomplete blocks on error.  Return the number of
bytes successfully transferred, rounded down to the nearest block.
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When we encounter an error, make sure we complete the transaction
otherwise we'll leave the request dangling.
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"

Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped
scancodes, but rather return KEY_RESERVED.

This fixes breakage with Ubuntu's input-kbd utility that stopped
returning full keymaps for remote controls.
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mark Lord <kernel@teksavvy.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - retry failed resets when reconnecting
  Input: synaptics - fix reconnect logic on MT devices
  Input: tegra-kbc - fix keymap entry for LeftMeta key
  Input: tegra-kbc - fix build error

Since check_prlimit_permission always fails in the case of SUID/GUID
processes, such processes are not able to read or set their own limits.
This commit changes this by assuming that process can always read/change
its own limits.
Signed-off-by: Kacper Kornet <kornet@camk.edu.pl>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove duplicated #include('s) in
  drivers/platform/x86/intel_scu_ipc.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In ntfs_mft_record_alloc() when mapping the new extent mft record with
map_extent_mft_record() we overwrite @M with the return value and on
error, we then try to use the old @M but that is no longer there as @M
now contains an error code instead so we crash when dereferencing the
error code as if it were a pointer.

The simple fix is to use a temporary variable to store the return value
thus preserving the original @M for later use.  This is a backport from
the commercial Tuxera-NTFS driver and is well tested...

Thanks go to Julia Lawall for pointing this out (whilst I had fixed it
in the commercial driver I had failed to fix it in the Linux kernel).
Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: More crypto cleanup (try #2)
  CIFS: Add strictcache mount option
  CIFS: Implement cifs_strict_writev (try #4)
  [CIFS] Replace cifs md5 hashing functions with kernel crypto APIs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
  kmemleak: Allow kmemleak metadata allocations to fail
  kmemleak: remove memset by using kzalloc

* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  Delete zero-length drivers/staging/vme/bridges/Module.symvers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: HDA: Fix automute on Thinkpad L412/L512
  ALSA: HDA: Fix dmesg output of HDMI supported bits
  ALSA: fix invalid hardware.h include in ac97c for AVR32 architecture
  ASoC: correct link specifications for corgi, poodle and spitz
  ASoC: Samsung: Fix outdated cpu_dai_name for s3c24xx i2s
  ASoC: Fix codec device id format used by some dai_links
  ALSA: azt3328 -  fix broken AZF_FMT_XLATE macro
  ALSA: Xonar, CS43xx: Don't overrun static array
  ASoC: Handle low measured DC offsets for wm_hubs devices
  ASoC: da8xx/omap-l1xx: match codec_name with i2c ids
  ASoC: WM8994: fix wrong value in tristate function
  ASoC: WM8995: Fix incorrect use of snd_soc_update_bits()

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: set queue DMA alignment to sector size for ATAPI too
  libata: DVR-212D can't do SETXFER DVD-RW DVR-212D
  ahci: add HFLAG_YES_FBS and apply it to 88SE9128
  pata_hpt37x: inherit prereset() method for HPT374
  ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs
  pata_hpt37x: fold 'if' statement into 'switch'
  pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)
  pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...)
  pata_mpc52xx: inherit from ata_bmdma_port_ops