- 06 Apr, 2022 7 commits
-
-
Maxime Ripard authored
In order to get the field currently being output, the driver has been using the display FIFO frame count in the HVS, reading a 6-bit field at the offset 12 in the DISPSTATx register. While that field is indeed at that location for the FIFO 1 and 2, the one for the FIFO0 is actually in the DISPSTAT1 register, at the offset 18. Fixes: e538092c ("drm/vc4: Enable precise vblank timestamping for interlaced modes.") Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20220331143744.777652-3-maxime@cerno.tech
-
Maxime Ripard authored
During a commit, the core clock, which feeds the HVS, needs to run at a minimum of 500MHz. While doing that commit, we can also change the mode to one that requires a higher core clock, so we take the core clock rate associated to that new state into account for that boost. However, the old state also needs to be taken into account if it requires a core clock higher that the new one and our 500MHz limit, since it's still live in hardware at the beginning of our commit. Fixes: 16e10105 ("drm/vc4: Increase the core clock based on HVS load") Signed-off-by:
-
Maxime Ripard authored
Now that the clock driver makes sure we never end up with a rate of 0, the HDMI driver doesn't need to care anymore. Signed-off-by:
-
Maxime Ripard authored
The HVS core clock isn't really obvious, so let's add a bunch more comments and some logging for easier debugging. Signed-off-by:
-
Marek Vasut authored
The module owner = THIS_MODULE is set by I2C core, drop duplicate assignment. Fixes: 8dde6f74 ("drm: bridge: icn6211: Add I2C configuration support") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Reviewed-by:
Jagan Teki <jagan@amarulasolutions.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220401113317.7033-1-marex@denx.de
-
Xiaomeng Tong authored
Instead of exiting the loop as expected when an entry is found, the list_for_each_entry() continues until the traversal is complete. when found the entry, add a break after the switch statement. Signed-off-by:
Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220401115018.9335-1-xiam0nd.tong@gmail.com
-
Marek Vasut authored
Fix copy-paste error, module exit function should be marked with __exit instead of __init. Fixes: 8dde6f74 ("drm: bridge: icn6211: Add I2C configuration support") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220406014250.902187-1-marex@denx.deReviewed-by:
-
- 05 Apr, 2022 8 commits
-
-
Marek Vasut authored
The datasheet for this bridge is not available, the PLL behavior has been inferred from [1] and [2] and by analyzing the DPI pixel clock with scope. After further testing with other displays and different DSI data lane count, it turns out the P-factor is not 1/2^N divider, but rather only 1/N divider. It also turns out the input into the PLL seem to be ByteClock instead of DSI HS clock. Rework the P-factor calculation such that the PLL calculation code handles P-factor from 1..32 with P-factors above 16 must be even. In case P-factor is even, enable built-in 1:2 divider and program P-factor/2 to PLL_REF_DIV, otherwise configure only the P-factor into PLL_REF_DIV register. Switch the PLL factor calculation from kHz to Hz to maintain precision. [1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c [2] https://github.com/tdjastrzebski/ICN6211-Configurator Fixes: f30cf0ec ("drm: bridge: icn6211: Add generic DSI-to-DPI PLL configuration") Signed-off-by:
-
Christophe Branchereau authored
Following the introduction of bridge_atomic_enable in the ingenic drm driver, the crtc is enabled between .prepare and .enable, if it exists. Add it so the backlight is only enabled after the crtc is, to avoid graphical issues. As we're moving the "sleep out" command out of the init sequence into .enable for the ABT, we need to switch the regmap cache to REGCACHE_FLAT to be able to use regmap_set_bits, given this panel registers are write-ony and read as 0. Signed-off-by:
Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> [pcercuei: Remove empty line after opening brace] Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220321133651.291592-4-cbranchereau@gmail.com
-
Christophe Branchereau authored
This driver supports the NewVision NV3052C based LCDs. Right now, it only supports the LeadTek LTK035C5444T 2.4" 640x480 TFT LCD panel, which can be found in the Anbernic RG-350M handheld console. Signed-off-by:
-
Christophe Branchereau authored
ingenic_drm_bridge_atomic_enable allows the CRTC to be enabled after panels have slept out, and before their display is turned on, solving a graphical bug on the newvision nv3502c. Also add ingenic_drm_bridge_atomic_disable to balance it out. Signed-off-by:
Artur Rojek <contact@artur-rojek.eu> Link: https://patchwork.freedesktop.org/patch/msgid/20220321133651.291592-2-cbranchereau@gmail.com
-
Christian König authored
Use dma_resv_get_singleton() here to eventually get more than one write fence as single fence. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Lyude Paul <lyude@redhat.com> Cc: nouveau@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-14-christian.koenig@amd.com
-
Maxime Ripard authored
Let's start the 5.19 development cycle. Signed-off-by: -
Christian König authored
Drivers should never touch this directly. v2: fix rebase clash Signed-off-by:
-
Christian König authored
Instead use the new dma_resv_get_singleton function. Signed-off-by:
-
- 04 Apr, 2022 8 commits
-
-
Xiaomeng Tong authored
The bug is here: if (nvkm_cstate_valid(clk, cstate, max_volt, clk->temp)) return cstate; The list iterator value 'cstate' will *always* be set and non-NULL by list_for_each_entry_from_reverse(), so it is incorrect to assume that the iterator value will be unchanged if the list is empty or no element is found (In fact, it will be a bogus pointer to an invalid structure object containing the HEAD). Also it missed a NULL check at callsite and may lead to invalid memory access after that. To fix this bug, just return 'encoder' when found, otherwise return NULL. And add the NULL check. Cc: stable@vger.kernel.org Fixes: 1f7f3d91 ("drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog") Signed-off-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Randy Dunlap authored
It looks like the incorrect name of a function parameter was used in the kernel-doc notation, so just change it to the function's parameter name to quell the kernel-doc warning. drivers/gpu/drm/drm_format_helper.c:640: warning: Function parameter or member 'vaddr' not described in 'drm_fb_xrgb8888_to_mono_reversed' drivers/gpu/drm/drm_format_helper.c:640: warning: Excess function parameter 'src' description in 'drm_fb_xrgb8888_to_mono_reversed' Fixes: bcf8b616 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> CC: Maxime Ripard <mripard@kernel.org> CC: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Fix a build warning from 'make htmldocs' by correcting the lock name in the kernel-doc comment. include/drm/drm_file.h:369: warning: Function parameter or member 'master_lookup_lock' not described in 'drm_file' Signed-off-by:
-
Daniel Vetter authored
You really need to hold the reservation here or all kinds of funny things can happen between grabbing the dependencies and inserting the new fences. v2: Fix commit summary (Christian) Acked-by:
Melissa Wen <mwen@igalia.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220331204651.2699107-4-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Integrated into the scheduler now and all users converted over. v2: Rebased over changes from König. Acked-by:
-
Daniel Vetter authored
We need to pull the drm_sched_job_init much earlier, but that's very minor surgery. v2: Actually fix up cleanup paths by calling drm_sched_job_init, which I wanted to to in the previous round (and did, for all other drivers). Spotted by Lucas. v3: Rebase over renamed functions to add dependencies. v4: Rebase over patches from Christian. v5: More rebasing over work from Christian. Acked-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
-
Liu Ying authored
Since this driver has been changed to use the resource managed devm_drm_of_get_bridge() to get bridge from ->attach(), it's unnecessary to call drm_of_panel_bridge_remove() to remove the bridge from ->detach(). So, let's drop the drm_of_panel_bridge_remove() function call. As nwl_dsi_bridge_detach() only calls drm_of_panel_bridge_remove(), it can also be dropped. Cc: Robert Foss <robert.foss@linaro.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
-
Jagan Teki authored
This driver has been changed to use the resource managed devm_drm_of_get_bridge() to get bridge from ->bind(), it's unnecessary to call drm_of_panel_bridge_remove() to remove the bridge from ->unbind() as devm_drm_of_get_bridge() is automatically remove the bridge when @dev is unbound. Drop it the drm_bridge_remove(). Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 03 Apr, 2022 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
-
Christian König authored
Makes the code a bit more simpler. Signed-off-by:
-
Christian König authored
Use dma_resv_get_singleton() here to eventually get more than one write fence as single fence. Signed-off-by:
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
-
Christian König authored
Get the write fence using dma_resv_for_each_fence instead of accessing it manually. v2: add TODO comment Signed-off-by:
-
Christian König authored
Instead use the new dma_resv_get_singleton function. Signed-off-by:
-
Christian König authored
Instead use the new dma_resv_get_singleton function. v2: drop the TODO comment. Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-7-christian.koenig@amd.com
-
Christian König authored
Add a function to simplify getting a single fence for all the fences in the dma_resv object. v2: fix ref leak in error handling Signed-off-by:
-
Sui Jingfeng authored
Signed-off-by:
Sui Jingfeng <15330273260@189.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20220402134413.1705246-1-15330273260@189.cnReviewed-by:
-
Stephen Boyd authored
This reverts commit 7dabfa2b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reported-by:
Tony Lindgren <tony@atomide.com> Reported-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
-
- 02 Apr, 2022 2 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Avoid SEGV if core.cpus isn't set in 'perf stat'. - Stop depending on .git files for building PERF-VERSION-FILE, used in 'perf --version', fixing some perf tools build scenarios. - Convert tracepoint.py example to python3. - Update UAPI header copies from the kernel sources: socket, mman-common, msr-index, KVM, i915 and cpufeatures. - Update copy of libbpf's hashmap.c. - Directly return instead of using local ret variable in evlist__create_syswide_maps(), found by coccinelle. * tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf python: Convert tracepoint.py example to python3 perf evlist: Directly return instead of using local ret variable perf cpumap: More cpu map reuse by merge. perf cpumap: Add is_subset function perf evlist: Rename cpus to user_requested_cpus perf tools: Stop depending on .git files for building PERF-VERSION-FILE tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf beauty: Update copy of linux/socket.h with the kernel sources perf tools: Update copy of libbpf's hashmap.c perf stat: Avoid SEGV if core.cpus isn't set
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix empty $(PYTHON) expansion. - Fix UML, which got broken by the attempt to suppress Clang warnings. - Fix warning message in modpost. * tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: restore the warning message for missing symbol versions Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS" kbuild: Remove '-mno-global-merge' kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh kconfig: remove stale comment about removed kconfig_print_symbol()
-
