With the CXL mailbox context split out, cxl_internal_send_cmd() can take
'struct cxl_mailbox' as an input parameter rather than
'struct memdev_dev_state'. Change input parameter for
cxl_internal_send_cmd() and fixup all impacted call sites.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-4-dave.jiang@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

Create a new 'struct cxl_mailbox' and move all mailbox related bits to
it. This allows isolation of all CXL mailbox data in order to export
some of the calls to external kernel callers and avoid exporting of CXL
driver specific bits such has device states. The allocation of
'struct cxl_mailbox' is also split out with cxl_mailbox_init() so the
mailbox can be created independently.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-3-dave.jiang@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

Group all cxl related kernel headers into include/cxl/ directory.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-2-dave.jiang@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

In testing Dynamic Capacity Device (DCD) support, a lockdep splat
revealed an ABBA issue between the memory notifiers and the DCD extent
processing code.[0]  Changing the lock ordering within DCD proved
difficult because regions must be stable while searching for the proper
region and then the device lock must be held to properly notify the DAX
region driver of memory changes.

Dan points out in the thread that notifiers should be able to trust that
it is safe to access static data.  Region data is static once the device
is realized and until it's destruction.  Thus it is better to manage the
notifiers within the region driver.

Remove the need for a lock by ensuring the notifiers are active only
during the region's lifetime.

Furthermore, remove cxl_region_nid() because resource can't be NULL
while the region is stable.

Link: https://lore.kernel.org/all/66b4cf539a79b_a36e829416@iweiny-mobl.notmuch/ [0]
Cc: Ying Huang <ying.huang@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240904-fix-notifiers-v3-1-576b4e950266@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

Cases can be divided into two categories which are DVSEC range enabled and
not enabled when HDM decoders exist but is not enabled. To avoid checking
info->mem_enabled, which indicates the enablement of DVSEC range, every
time, we can check !info->mem_enabled once in advance. This simplification
can make the code clearer.

No functional change intended.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-5-yanfei.xu@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

In theory a device might set the mem_info_valid bit for a first range
after it is ready but before as second range has reached that state.
Therefore, the correct approach is to check the Mem_info_valid bit for
each applicable DVSEC range against HDM_COUNT, rather than only for the
DVSEC range 1. Consequently, let's move the check into the "for loop"
that handles each DVSEC range.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-4-yanfei.xu@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

commit ce17ad0d ("cxl: Wait Memory_Info_Valid before access memory
related info") added another implementation, which is
cxl_dvsec_mem_range_valid(), of waiting for memory_info_valid without
realizing it duplicated wait_for_valid(). Remove wait_for_valid() and
retain cxl_dvsec_mem_range_valid() as the former is hardcoded to check
only the Memory_Info_Valid bit of DVSEC range 1, while the latter allows
for selection between DVSEC range 1 or 2 via parameter.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-3-yanfei.xu@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

The function cxl_dvsec_rr_decode() retrieves and records DVSEC ranges
into info->dvsec_range[], regardless of whether it is non-zero range,
and the variable info->ranges indicates the number of non-zero ranges.
However, in cxl_hdm_decode_init(), the validation for
info->dvsec_range[] occurs in a for loop that iterates based on
info->ranges. It may result in zero range to be validated but non-zero
range not be validated, in turn, the number of allowed ranges is to be
0. Address it by only record non-zero ranges.

This fix is not urgent as it requires a configuration that zeroes out
the first dvsec range while populating the second. This has not been
observed, but it is theoretically possible. If this gets picked up for
-stable, no harm done, but there is no urgency to backport.

Fixes: 560f7855 ("cxl/pci: Retrieve CXL DVSEC memory info")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-2-yanfei.xu@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

cxl_dport_init_ras_reporting() already checks host_bridge->native_aer
before invoking cxl_disable_rch_root_ints(), so
cxl_disable_rch_root_ints() does not need to check it again.
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830061308.2327065-3-ming4.li@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

cxl_dport_map_ras() is used to map CXL RAS capability, the RCH AER
capability should not be mapped in the function but should mapped in
cxl_dport_init_ras_reporting(). Moving cxl_dport_map_ras() out of
cxl_dport_map_ras() and into cxl_dport_init_ras_reporting().

In cxl_dport_init_ras_reporting(), the AER capability position in RCRB
will be located but the position is only used in
cxl_dport_map_rch_aer(), getting the position in cxl_dport_map_rch_aer()
rather than cxl_dport_init_ras_reporting() is more reasonable and makes
the code clearer.

Besides, some local variables in cxl_dport_map_rch_aer() are
unnecessary, remove them to make the function more concise.
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830061308.2327065-2-ming4.li@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

The name of cxl_setup_parent_dport() function is not clear, the function
is used to initialize AER and RAS capabilities on a dport, therefore,
rename the function to cxl_dport_init_ras_reporting(), it is easier for
user to understand what the function does. Besides, adjust the order of
the function parameters, the subject of cxl_dport_init_ras_reporting()
is a cxl dport, so a struct cxl_dport as the first parameter of the
function should be better.

cxl_dport_map_regs() is used to map CXL RAS capability on a cxl dport,
using cxl_dport_map_ras() as the function name.
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830061308.2327065-1-ming4.li@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

In __devm_cxl_add_port(), there is a 'goto' to call put_device() for the
error cases between device_initialize() and device_add() to dereference
the 'struct device' of a new cxl_port. The 'goto' pattern in the case
can be removed by refactoring. Introducing a new function called
cxl_port_add() which is used to add the 'struct device' of a new
cxl_port to device hierarchy, moving the functions needing the help of
the 'goto' into cxl_port_add(), and using a scoped-based resource
management __free() to drop the open coded put_device() and the 'goto'
for the error cases.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwaei.com>
Link: https://patch.msgid.link/20240830013138.2256244-3-ming4.li@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

A device_lock() and device_unlock() pair can be replaced by a cleanup
helper scoped_guard() or guard(), that can enhance code readability. In
CXL subsystem, still use device_lock() and device_unlock() pairs for cxl
port resource protection, most of them can be replaced by a
scoped_guard() or a guard() simply.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830013138.2256244-2-ming4.li@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

Using scope-based resource management __free() marco with a new helper
called put_cxl_port() to drop open coded the put_device() used to
dereference the 'struct device' in cxl_port.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240830013138.2256244-1-ming4.li@intel.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

The header file core.h is included twice. Remove the last
one. The compilation test has passed.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20240830080016.3542184-1-lihongbo22@huawei.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

Use dev_is_platform() instead of checking bus type directly.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240827095123.168696-1-kunwu.chan@linux.devSigned-off-by: Dave Jiang <dave.jiang@intel.com>

Use ERR_CAST() as it is designed for casting an error pointer to
another type.

This macro utilizes the __force and __must_check modifiers, which instruct
the compiler to verify for errors at the locations where it is employed.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240829125235.3266865-1-liyuesong@vivo.comSigned-off-by: Dave Jiang <dave.jiang@intel.com>

Pull smb client fixes from Steve French:

 - copy_file_range fix

 - two read fixes including read past end of file rc fix and read retry
   crediting fix

 - falloc zero range fix

* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
  cifs: Fix copy offload to flush destination region
  netfs, cifs: Fix handling of short DIO read
  cifs: Fix lack of credit renegotiation on read retry

Push bcachefs fixes from Kent Overstreet:
 "The data corruption in the buffered write path is troubling; inode
  lock should not have been able to cause that...

   - Fix a rare data corruption in the rebalance path, caught as a nonce
     inconsistency on encrypted filesystems

   - Revert lockless buffered write path

   - Mark more errors as autofix"

* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
  bcachefs: Mark more errors as autofix
  bcachefs: Revert lockless buffered IO path
  bcachefs: Fix bch2_extents_match() false positive
  bcachefs: Fix failure to return error in data_update_index_update()

errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.

note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We had a report of data corruption on nixos when building installer
images.

https://github.com/NixOS/nixpkgs/pull/321055#issuecomment-2184131334

It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.

Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.

It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.

Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.

My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.

Fixes: 7e64c86c ("bcachefs: Buffered write path now can avoid the inode lock")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull misc fixes from Guenter Roeck.

These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  apparmor: fix policy_unpack_test on big endian systems
  Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
  microblaze: don't treat zero reserved memory regions as error

Pull power sequencing fix from Bartosz Golaszewski:
 "A follow-up fix for the power sequencing subsystem. It turned out the
  previous fix for this driver was incomplete and broke the WLAN support
  on some platforms. This addresses the issue.

   - set the direction of the wlan-enable GPIO to output after
     requesting it as-is"

* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  power: sequencing: qcom-wcn: set the wlan-enable GPIO to output

Commit a9aaf1ff ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.

Fixes: a9aaf1ff ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/20240823115500.37280-1-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 6.11-rc6.  Included in here are:

   - dwc3 driver fixes for reported issues

   - MAINTAINER file update, marking a driver as unsupported :(

   - cdnsp driver fixes

   - USB gadget driver fix

   - USB sysfs fix

   - other tiny fixes

   - new device ids for usb serial driver

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add MeiG Smart SRM825L
  usb: cdnsp: fix for Link TRB with TC
  usb: dwc3: st: add missing depopulate in probe error path
  usb: dwc3: st: fix probed platform device ref count on probe error path
  usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
  usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
  usb: typec: fsa4480: Relax CHIP_ID check
  usb: dwc3: xilinx: add missing depopulate in probe error path
  usb: dwc3: omap: add missing depopulate in probe error path
  dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
  usb: gadget: uvc: queue pump work in uvcg_video_enable()
  cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
  usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
  usb: dwc3: core: Prevent USB core invalid event buffer address access
  MAINTAINERS: Mark UVC gadget driver as orphan

Pull SCSI fixes from James Bottomley:
 "Minor fixes only.

  The sd.c one ignores a sync cache request if format is in progress
  which can happen if formatting a drive across suspend/resume"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
  scsi: aacraid: Fix double-free on probe failure
  scsi: lpfc: Fix overflow build issue

Pull nfsd fix from Chuck Lever:

 - One more write delegation fix

* tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease

Pull xfs fixes from Chandan Babu:

 - Do not call out v1 inodes with non-zero di_nlink field as being
   corrupt

 - Change xfs_finobt_count_blocks() to count "free inode btree" blocks
   rather than "inode btree" blocks

 - Don't report the number of trimmed bytes via FITRIM because the
   underlying storage isn't required to do anything and failed discard
   IOs aren't reported to the caller anyway

 - Fix incorrect setting of rm_owner field in an rmap query

 - Report missing disk offset range in an fsmap query

 - Obtain m_growlock when extending realtime section of the filesystem

 - Reset rootdir extent size hint after extending realtime section of
   the filesystem

* tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: reset rootdir extent size hint after growfsrt
  xfs: take m_growlock when running growfsrt
  xfs: Fix missing interval for missing_owner in xfs fsmap
  xfs: use XFS_BUF_DADDR_NULL for daddrs in getfsmap code
  xfs: Fix the owner setting issue for rmap query in xfs fsmap
  xfs: don't bother reporting blocks trimmed via FITRIM
  xfs: xfs_finobt_count_blocks() walks the wrong btree
  xfs: fix folio dirtying for XFILE_ALLOC callers
  xfs: fix di_onlink checking for V1/V2 inodes

Pull ARM SoC fixes from Arnd Bergmann:
 "There is a fairly large number of bug fixes for Qualcomm platforms,
  most of them addressing issues with the devicetree files for the newly
  added Snapdragon X1 based laptops to make them more reliable.

  The Qualcomm driver changes address a few build-time issues as well as
  runtime problems in the tzmem and scm firmware, the USB Type-C driver,
  and the cmd-db and pmic_glink soc drivers.

  The NXP i.MX usually gets a bunch of devicetree fixes that is
  proportional to the number of supported machines. This includes both
  warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
  layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
  board.

  The other changes are the usual minor changes, including an update to
  the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
  (risc-v)"

* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
  firmware: microchip: fix incorrect error report of programming:timeout on success
  soc: qcom: pd-mapper: Fix singleton refcount
  firmware: qcom: tzmem: disable sdm670 platform
  soc: qcom: pmic_glink: Actually communicate when remote goes down
  usb: typec: ucsi: Move unregister out of atomic section
  soc: qcom: pmic_glink: Fix race during initialization
  firmware: qcom: qseecom: remove unused functions
  firmware: qcom: tzmem: fix virtual-to-physical address conversion
  firmware: qcom: scm: Mark get_wq_ctx() as atomic call
  arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
  arm64: dts: qcom: disable GPU on x1e80100 by default
  arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
  arm64: dts: imx95: correct L3Cache cache-sets
  arm64: dts: imx95: correct a55 power-domains
  arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
  arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
  ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
  arm64: dts: imx93: update default value for snps,clk-csr
  arm64: dts: freescale: tqma9352: Fix watchdog reset
  arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
  ...

Pull input fix from Dmitry Torokhov:

 - a fix for Cypress PS/2 touchpad for regression introduced in 6.11
   merge window where a timeout condition is incorrectly reported for
   all extended Cypress commands

* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cypress_ps2 - fix waiting for command response

Pull pci fixes from Bjorn Helgaas:

 - Add Manivannan Sadhasivam as PCI native host bridge and endpoint
   driver reviewer (Manivannan Sadhasivam)

 - Disable MHI RAM data parity error interrupt for qcom SA8775P SoC to
   work around hardware erratum that causes a constant stream of
   interrupts (Manivannan Sadhasivam)

 - Don't try to fall back to qcom Operating Performance Points (OPP)
   support unless the platform actually supports OPP (Manivannan
   Sadhasivam)

 - Add imx@lists.linux.dev mailing list to MAINTAINERS for NXP
   layerscape and imx6 PCI controller drivers (Frank Li)

* tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: PCI: Add NXP PCI controller mailing list imx@lists.linux.dev
  PCI: qcom: Use OPP only if the platform supports it
  PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoC
  MAINTAINERS: Add Manivannan Sadhasivam as Reviewer for PCI native host bridge and endpoint drivers

Pull block fix from Jens Axboe:
 "Fix for a single regression for WRITE_SAME introduced in the 6.11
  merge window"

* tag 'block-6.11-20240830' of git://git.kernel.dk/linux:
  block: fix detection of unsupported WRITE SAME in blkdev_issue_write_zeroes

Pull io_uring fixes from Jens Axboe:

 - A fix for a regression that happened in 6.11 merge window, where the
   copying of iovecs for compat mode applications got broken for certain
   cases.

 - Fix for a bug introduced in 6.10, where if using recv/send bundles
   with classic provided buffers, the recv/send would fail to set the
   right iovec count. This caused 0 byte send/recv results. Found via
   code coverage testing and writing a test case to exercise it.

* tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux:
  io_uring/kbuf: return correct iovec count from classic buffer peek
  io_uring/rsrc: ensure compat iovecs are copied correctly

Merge tag 'at91-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes

Microchip AT91 fixes for v6.11

It contains:
- DTS directory update to match all entries not only those starting with
  at91 or sama

Pull lsm fix from Paul Moore:
 "One small patch to correct a NFS permissions problem with SELinux and
  Smack"

* tag 'lsm-pr-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  selinux,smack: don't bypass permissions check in inode_setsecctx hook

Pull power management fixes from Rafael Wysocki:
 "These fix three issues in the amd-pstate cpufreq driver.

  Specifics:

   - Remove checks for highest performance match on preferred cores when
     updating preferred core ranking in amd-pstate (Mario Limonciello)

   - Make amd-pstate call topology_logical_package_id() instead of
     logical_die_id() to get a socked ID for a CPU (Gautham Shenoy)

   - Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan
     Carpenter)"

* tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
  cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
  cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()

Pull dmaengine fixes from Vinod Koul:

 - A bunch of dw driver changes to fix the src/dst addr width config

 - Omap driver fix for sglen initialization

 - stm32-dma3 driver lli_size init fix

 - dw edma driver fixes for watermark interrupts and unmasking STOP and
   ABORT interrupts

* tag 'dmaengine-fix-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: dw-edma: Do not enable watermark interrupts for HDMA
  dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA
  dmaengine: stm32-dma3: Set lli_size after allocation
  dmaengine: ti: omap-dma: Initialize sglen after allocation
  dmaengine: dw: Unify ret-val local variables naming
  dmaengine: dw: Simplify max-burst calculation procedure
  dmaengine: dw: Define encode_maxburst() above prepare_ctllo() callbacks
  dmaengine: dw: Simplify prepare CTL_LO methods
  dmaengine: dw: Add memory bus width verification
  dmaengine: dw: Add peripheral bus width verification

Pull phy fixes from Vinod Koul:

 - Qualcomm QMP X1E80100 PCIe Gen4 PHY initialisation fix

 - Freescale imx8mq tuning parameter name fix

 - Samsung exynos5 fir for error code in probe()

 - Xilinx Zynqmp SGMII linkup failure fix

* tag 'phy-fixes-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume
  phy: exynos5-usbdrd: fix error code in probe()
  phy: fsl-imx8mq-usb: fix tuning parameter name
  phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation

Pull soundwire fix from Vinod Koul:

 - Single fix for non-continous port map programming

* tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: stream: fix programming slave ports for non-continous port maps