It's possible that the user configured only Tx hardware timestamping,
and thus we might be receiving PTP traffic which we timestamp but which
software never reads. In this case we don't want to check for Rx
timestamp hang, because we already know that software won't be handling
them. Thus, we add the same check against pf->ptp_rx as we have in the
Rx timestamp code path.

Change-ID: I66486c8dba307facbff8eace4e52e2f083789d1b
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add lldp control commands, add oem ocsd and ocbb commands.

Change-ID: I89eba2bd02013d0a44e1ce900559c54bb15f4a66
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix up NVM config read and write data structs.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add struct size checks to many of the indirect structs and a few
command structs that were left out previously.

Change-ID: I7810b9af0f04e3ced670639f8671daf7df9b3f4d
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Disable firmware LLDP agent for NICs with firmware version lower than
v4.3. Added a message when driver disables the firmware LLDP agent on
such NICs.

Change-ID: Ia8abf89439c70cb50e23db82753d7d282265506b
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We should not be doing Tx or Rx timestamps if we do not have PTP
enabled. Add checks to ensure that we don't attempt to handle any PTP
related timestamping code if we have not enabled PTP on that PF.

Change-ID: I4335942ae2d5c5f91abfdbeeea02bcace49e7677
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We should not blindly enable the PTP interrupt flags for all PFs. We
should only enable the PTP interrupt in PFs which have enabled
PTP.

Change-ID: I051a17cae4c199a2f3cf7852266e27eda6630525
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Bump i40e to 1.2.5 and i40evf to 1.0.7.

Change-ID: I622556829056e3ed42d3b9d285fc5ffb693b21cc
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Dump Stats string has been removed from functional debugfs
help message. Now it does not show up when we echo command to
debugfs/Fortville queue.

Change-ID: I9333473826b574f1afa6ddb785fd7adfbdcb2884
Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch creates a define for interrupt name string configuration that
is large enough to contain full bus/slot info, rather than just netdev->name.

Change-ID: Iaac0d23dfb8526defeed69d91cea85ed4a50ddb2
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We don't need to give up in the reset/rebuild process if the DCB setup failed,
so handle it here the same as in the probe setup.  Also adjust the log strings
a little to look less scary.

Change-ID: I57308d703047e61d3f1a5e471ea77be232444ca0
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes a problem where the /proc/interrupts descriptions
from the msix configuration were truncating the needed bus info,
making it hard to distinguish configuration from port to port.
This patch increases the string buffer size in order to allow the
full data to be displayed and sync's the text formatting of the misc
and fdir interrupt names

Change-ID: Ib01d6c61fb3f4ac70fbdf5bcc520b22638ea54b7
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Increase ASQ timeout for some scenarios with multi-function devices

Change-ID: I2d7655b19e6c6f9a7ad04deacb106ca8d53886db
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Several little tweaks to keep FW, SV, and SW in line together
 - Remove the unused and deprecated
   i40e_aqc_opc_debug_modify_internals
 - Add define for iSCSI capability
 - Fix queue mask size
 - Adjust i40e_aqc_oem_param_change for ease-of-use

Change-ID: I51f250b367912968a7cec61b3a68110d9796e914
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kamil Kacperski <kamil.kacperski@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The patch c5adde94 ("netlink:
eliminate nl_sk_hash_lock") introduced a bug where the EADDRINUSE
error has been replaced by ENOMEM.  This patch rectifies that
problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When we put our declared work task in the global workqueue with
schedule_delayed_work(), its delay parameter is always zero.
Therefore, we should define a regular work in rhashtable structure
instead of a delayed work.

By the way, we add a condition to check whether resizing functions
are NULL before cancelling the work, avoiding to cancel an
uninitialized work.

Lastly, while we wait for all work items we submitted before to run
to completion with cancel_delayed_work(), ht->mutex has been taken in
rhashtable_destroy(). Moreover, cancel_delayed_work() doesn't return
until all work items are accomplished, and when work items are
scheduled, the work's function - rht_deferred_worker() will be called.
However, as rht_deferred_worker() also needs to acquire the lock,
deadlock might happen at the moment as the lock is already held before.
So if the cancel work function is moved out of the lock covered scope,
this will avoid the deadlock.

Fixes: 97defe1e ("rhashtable: Per bucket locks & deferred expansion/shrinking")
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Refactor macros to conform to uniform standards

This patch series cleansup macros/register defines, defined in t4.h and
t4fw_ri_api.h and all the affected files.

This patch series is created against net-next tree and includes patches on
iw_cxgb4 tree. Since the patches are dependent on previous cleanup patched we
would line to get this series merged through net-next tree.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Cleanup all the MACROS that are defined in t4fw_ri_api.h and affected files
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cleanup all the MACROS defined in t4.h and the affected files
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cleanup all the MACROS that are defined in t4fw_ri_api.h and affected files
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cleanup all the MACROS defined in t4.h and the affected files
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10/100 MACB does not have the same statistics possibilities as GEM. Separate
macb_ethtool_ops to make a new GEM-specific struct with the new statistics
functions included.
Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Spaces should surround add, multiply, and bitshift operators.
Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change comments to not exceed 80 characters per line.
Update block comments in macb.h to start on the line after /*.
Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Gao Zhenyu <gzhenyu@vmware.com>
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is just a cleanup, because in the current code MDBA_SET_ENTRY_MAX ==
MDBA_SET_ENTRY.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add Atari specific code to the smc91x Ethernet driver. This code is used
on the EtherNAT adapter card for the Atari Falcon extension port.
Signed-off-by: Michael Schmitz <schmitz@debian.org>
Tested-by: Christian Steigies <cts@debian.org>
[geert: Sort Kconfig entries, split in hard and soft dependencies]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2015-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Here's a big pile of changes for this round.

We have
 * a lot of regulatory code changes to deal with the
   way newer Intel devices handle this
 * a change to drop packets while disconnecting from
   an AP instead of trying to wait for them
 * a new attempt at improving the tailroom accounting
   to not kick in too much for performance reasons
 * improvements in wireless link statistics
 * many other small improvements and small fixes that
   didn't seem necessary for 3.19 (e.g. in hwsim which
   is testing only code)

Conflicts:
	drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c

Minor overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>

Anish Bhatt says:

====================
cxgb4/cxgb4i : Update & use ipv6 handling api

This patch series consolidates and updates the ipv6 api, as well as exports
it for use by upper level drivers dependent on cxgb4

v2: Fix formatting issues in clip_tbl.c
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Get a reference on every ipv6 address we offload to hardware so that it cannot
be prematurely cleared out before cleanup.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch improves on previously added support for ipv6 addresses. The code
is consolidated to a single file and adds an api for use by dependent upper
level drivers such as cxgb4i/iw_cxgb4 etc.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Deepak Singh <deepak.s@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RAW sockets with hdrinc suffer from contention on rt_uncached_lock
spinlock.

One solution is to use percpu lists, since most routes are destroyed
by the cpu that created them.

It is unclear why we even have to put these routes in uncached_list,
as all outgoing packets should be freed when a device is dismantled.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: caacf05e ("ipv4: Properly purge netdev references on uncached routes.")
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace "unsigned long" by "u32" when handling 32-bit register data.

A.o., this saves 11 * 36 bytes in the static sh_eth_cpu_data structures
when compiling for 64-bit.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

In boards, the dm9000 chip's power and reset can be controlled by gpio.

It makes sense to add them to the dm9000 driver and let dt be used to
enable power and reset the phy.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Better to use available helpers.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
netfilter updates for net-next

The following patchset contains netfilter updates for net-next, just a
bunch of cleanups and small enhancement to selectively flush conntracks
in ctnetlink, more specifically the patches are:

1) Rise default number of buckets in conntrack from 16384 to 65536 in
   systems with >= 4GBytes, patch from Marcelo Leitner.

2) Small refactor to save one level on indentation in xt_osf, from
   Joe Perches.

3) Remove unnecessary sizeof(char) in nf_log, from Fabian Frederick.

4) Another small cleanup to remove redundant variable in nfnetlink,
   from Duan Jiong.

5) Fix compilation warning in nfnetlink_cthelper on parisc, from
   Chen Gang.

6) Fix wrong format in debugging for ctseqadj, from Gao feng.

7) Selective conntrack flushing through the mark for ctnetlink, patch
   from Kristian Evensen.

8) Remove nf_ct_conntrack_flush_report() exported symbol now that is
   not required anymore after the selective flushing patch, again from
   Kristian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Graf says:

====================
VXLAN Group Policy Extension

Implements supports for the Group Policy VXLAN extension [0] to provide
a lightweight and simple security label mechanism across network peers
based on VXLAN. The security context and associated metadata is mapped
to/from skb->mark. This allows further mapping to a SELinux context
using SECMARK, to implement ACLs directly with nftables, iptables, OVS,
tc, etc.

The extension is disabled by default and should be run on a distinct
port in mixed Linux VXLAN VTEP environments. Liberal VXLAN VTEPs
which ignore unknown reserved bits will be able to receive VXLAN-GBP
frames.

Simple usage example:

10.1.1.1:
   # ip link add vxlan0 type vxlan id 10 remote 10.1.1.2 gbp
   # iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200

10.1.1.2:
   # ip link add vxlan0 type vxlan id 10 remote 10.1.1.1 gbp
   # iptables -I INPUT -m mark --mark 0x200 -j DROP

iproute2 [1] and OVS [2] support will be provided in separate patches.

[0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy
[1] https://github.com/tgraf/iproute2/tree/vxlan-gbp
[2] https://github.com/tgraf/ovs/tree/vxlan-gbp
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduces support for the group policy extension to the VXLAN virtual
port. The extension is disabled by default and only enabled if the user
has provided the respective configuration.

  ovs-vsctl add-port br0 vxlan0 -- \
     set Interface vxlan0 type=vxlan options:exts=gbp

The configuration interface to enable the extension is based on a new
attribute OVS_VXLAN_EXT_GBP nested inside OVS_TUNNEL_ATTR_EXTENSION
which can carry additional extensions as needed in the future.

The group policy metadata is stored as binary blob (struct ovs_vxlan_opts)
internally just like Geneve options but transported as nested Netlink
attributes to user space.

Renames the existing TUNNEL_OPTIONS_PRESENT to TUNNEL_GENEVE_OPT with the
binary value kept intact, a new flag TUNNEL_VXLAN_OPT is introduced.

The attributes OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS and existing
OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS are implemented mutually exclusive.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

nlattr_set() is currently hardcoded to two levels of nesting. This change
introduces struct ovs_len_tbl to define minimal length requirements plus
next level nesting tables to traverse the key attributes to arbitrary depth.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Also factors out Geneve validation code into a new separate function
validate_and_copy_geneve_opts().

A subsequent patch will introduce VXLAN options. Rename the existing
GENEVE_TUN_OPTS() to reflect its extended purpose of carrying generic
tunnel metadata options.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>