A reference to the parent device node is held by add_dt_node() for the
node to be added. If the call to dlpar_configure_connector() fails
add_dt_node() returns ENOENT and that reference is not freed.

Add a call to of_node_put(parent_dn) prior to bailing out after a
failed dlpar_configure_connector() call.

Fixes: 8d5ff320 ("powerpc/pseries: Make dlpar_configure_connector parent node aware")
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 215ee763 ("powerpc: pseries: remove dlpar_attach_node
dependency on full path") reworked dlpar_attach_node() to no longer
look up the parent node "/cpus", but instead to have the parent node
passed by the caller in the function parameter list.

As a result dlpar_attach_node() is no longer responsible for freeing
the reference to the parent node. However, commit 215ee763 failed
to remove the of_node_put(parent) call in dlpar_attach_node(), or to
take into account that the reference to the parent in the caller
dlpar_cpu_add() needs to be held until after dlpar_attach_node()
returns.

As a result doing repeated cpu add/remove dlpar operations will
eventually result in the following error:

  OF: ERROR: Bad of_node_put() on /cpus
  CPU: 0 PID: 10896 Comm: drmgr Not tainted 4.13.0-autotest #1
  Call Trace:
   dump_stack+0x15c/0x1f8 (unreliable)
   of_node_release+0x1a4/0x1c0
   kobject_put+0x1a8/0x310
   kobject_del+0xbc/0xf0
   __of_detach_node_sysfs+0x144/0x210
   of_detach_node+0xf0/0x180
   dlpar_detach_node+0xc4/0x120
   dlpar_cpu_remove+0x280/0x560
   dlpar_cpu_release+0xbc/0x1b0
   arch_cpu_release+0x6c/0xb0
   cpu_release_store+0xa0/0x100
   dev_attr_store+0x68/0xa0
   sysfs_kf_write+0xa8/0xf0
   kernfs_fop_write+0x2cc/0x400
   __vfs_write+0x5c/0x340
   vfs_write+0x1a8/0x3d0
   SyS_write+0xa8/0x1a0
   system_call+0x58/0x6c

Fix the issue by removing the of_node_put(parent) call from
dlpar_attach_node(), and ensuring that the reference to the parent
node is properly held and released by the caller dlpar_cpu_add().

Fixes: 215ee763 ("powerpc: pseries: remove dlpar_attach_node dependency on full path")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
[mpe: Add a comment in the code and frob the change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Otherwise we end up not yet having computed the right diag data size
on powernv where EEH initialization is delayed, thus causing memory
corruption later on when calling OPAL.

Fixes: 5cb1f8fd ("powerpc/powernv/pci: Dynamically allocate PHB diag data")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Optprobes depended on an updated regs->nip from analyse_instr() to
identify the location to branch back from the optprobes trampoline.
However, since commit 3cdfcbfd ("powerpc: Change analyse_instr so
it doesn't modify *regs"), analyse_instr() doesn't update the registers
anymore.  Due to this, we end up branching back from the optprobes
trampoline to the same branch into the trampoline resulting in a loop.

Fix this by calling out to emulate_update_regs() before using the nip.
Additionally, explicitly compare the return value from analyse_instr()
to 1, rather than just checking for !0 so as to guard against any
future changes to analyse_instr() that may result in -1 being returned
in more scenarios.

Fixes: 3cdfcbfd ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Merge one commit from Scott which I missed while away.

Commit 24be85a2 ("powerpc/powernv: Clear PECE1 in LPCR via
stop-api only on Hotplug") clears the PECE1 bit of the LPCR via
stop-api during CPU-Hotplug to prevent wakeup due to a decrementer on
an offlined CPU which is in a deep stop state.

In the case where the stop-api support is found to be lacking, the
commit 785a12af ("powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT
states when stop-api fails") disables deep states that lose hypervisor
context. Thus in this case, the offlined CPU will be put to some
shallow idle state.

However, we currently unconditionally clear the PECE1 in LPCR via
stop-api during CPU-Hotplug even when deep states are disabled due to
stop-api failure.

Fix this by clearing PECE1 of LPCR via stop-api during CPU-Hotplug
*only* when the offlined CPU will be put to a deep state that loses
hypervisor context.

Fixes: 24be85a2 ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug")
Reported-by: Pavithra Prakash <pavirampu@linux.vnet.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Pavithra Prakash <pavrampu@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

mullw should do a 32 bit signed multiply and create a 64 bit signed
result. It currently truncates the result to 32 bits.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

mcrf broke when we changed analyse_instr() to not modify the register
state. The instruction writes to the CR, so we need to store the result
in op->ccval, not op->val.

Fixes: 3cdfcbfd ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

set_cr0() broke when we changed analyse_instr() to not modify the
register state. Instead of looking at regs->gpr[x] which has not
been updated yet, we need to look at op->val.

Fixes: 3cdfcbfd ("powerpc: Change analyse_instr so it doesn't modify *regs")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit cd63f3cf ("powerpc/tm: Fix saving of TM SPRs in core dump")
added code to access TM SPRs in flush_tmregs_to_thread(). However
flush_tmregs_to_thread() does not check if TM feature is available on
CPU before trying to access TM SPRs in order to copy live state to
thread structures. flush_tmregs_to_thread() is indeed guarded by
CONFIG_PPC_TRANSACTIONAL_MEM but it might be the case that kernel
was compiled with CONFIG_PPC_TRANSACTIONAL_MEM enabled and ran on
a CPU without TM feature available, thus rendering the execution
of TM instructions that are treated by the CPU as illegal instructions.

The fix is just to add proper checking in flush_tmregs_to_thread()
if CPU has the TM feature before accessing any TM-specific resource,
returning immediately if TM is no available on the CPU. Adding
that checking in flush_tmregs_to_thread() instead of in places
where it is called, like in vsr_get() and vsr_set(), is better because
avoids the same problem cropping up elsewhere.

Cc: stable@vger.kernel.org # v4.13+
Fixes: cd63f3cf ("powerpc/tm: Fix saving of TM SPRs in core dump")
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Kernel crashes if power pmu is not registered and user tries to dump
regs with 'echo p > /proc/sysrq-trigger'. Sample log:

  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000000d52f0

  NIP [c0000000000d52f0] perf_event_print_debug+0x10/0x230
  LR [c00000000058a938] sysrq_handle_showregs+0x38/0x50
  Call Trace:
   printk+0x38/0x4c (unreliable)
   __handle_sysrq+0xe4/0x270
   write_sysrq_trigger+0x64/0x80
   proc_reg_write+0x80/0xd0
   __vfs_write+0x40/0x200
   vfs_write+0xc8/0x240
   SyS_write+0x60/0x110
   system_call+0x58/0x6c

Fixes: 5f6d0380 ("powerpc/perf: Define perf_event_print_debug() to print PMU register values")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit eb3b705a ("ALSA: Make CONFIG_SND_OSSEMUL user-selectable")
means we need to set CONFIG_SND_OSSEMUL in our configs, otherwise we
lose some of the SND symbols.

And commit 0181307a ("ALSA: seq: Reorganize kconfig and build")
reorganised things, which causes the churn.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull KVM fixes from Radim Krčmář:

 - fix build without CONFIG_HAVE_KVM_IRQ_ROUTING

 - fix NULL access in x86 CR access

 - fix race with VMX posted interrups

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: remove WARN_ON_ONCE in kvm_vcpu_trigger_posted_interrupt
  KVM: VMX: do not change SN bit in vmx_update_pi_irte()
  KVM: x86: Fix the NULL pointer parameter in check_cr_write()
  Revert "KVM: Don't accept obviously wrong gsi values via KVM_IRQFD"

Pull MD fixes from Shaohua Li:
 "Two small patches to fix long-lived raid5 stripe batch bugs, one from
  Dennis and the other from me"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid5: preserve STRIPE_ON_UNPLUG_LIST in break_stripe_batch_list
  md/raid5: fix a race condition in stripe batch

Merge tag '4.14-smb3-multidialect-support-and-fixes-for-stable' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Convert default dialect to smb2.1 or later to allow connecting to
  Windows 7 for example, also includes some fixes for stable"

* tag '4.14-smb3-multidialect-support-and-fixes-for-stable' of git://git.samba.org/sfrench/cifs-2.6:
  Update version of cifs module
  cifs: hide unused functions
  SMB3: Add support for multidialect negotiate (SMB2.1 and later)
  CIFS/SMB3: Update documentation to reflect SMB3 and various changes
  cifs: check rsp for NULL before dereferencing in SMB2_open

WARN_ON_ONCE(pi_test_sn(&vmx->pi_desc)) in kvm_vcpu_trigger_posted_interrupt()
intends to detect the violation of invariant that VT-d PI notification
event is not suppressed when vcpu is in the guest mode. Because the
two checks for the target vcpu mode and the target suppress field
cannot be performed atomically, the target vcpu mode may change in
between. If that does happen, WARN_ON_ONCE() here may raise false
alarms.

As the previous patch fixed the real invariant breaker, remove this
WARN_ON_ONCE() to avoid false alarms, and document the allowed cases
instead.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reported-by: "Ramamurthy, Venkatesh" <venkatesh.ramamurthy@intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 28b835d6 ("KVM: Update Posted-Interrupts Descriptor when vCPU is preempted")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

In kvm_vcpu_trigger_posted_interrupt() and pi_pre_block(), KVM
assumes that PI notification events should not be suppressed when the
target vCPU is not blocked.

vmx_update_pi_irte() sets the SN field before changing an interrupt
from posting to remapping, but it does not check the vCPU mode.
Therefore, the change of SN field may break above the assumption.
Besides, I don't see reasons to suppress notification events here, so
remove the changes of SN field to avoid race condition.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reported-by: "Ramamurthy, Venkatesh" <venkatesh.ramamurthy@intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 28b835d6 ("KVM: Update Posted-Interrupts Descriptor when vCPU is preempted")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Routine check_cr_write() will trigger emulator_get_cpuid()->
kvm_cpuid() to get maxphyaddr, and NULL is passed as values
for ebx/ecx/edx. This is problematic because kvm_cpuid() will
dereference these pointers.

Fixes: d1cd3ce9 ("KVM: MMU: check guest CR3 reserved bits based on its physical address width.")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This reverts commit 36ae3c0a.

The commit broke compilation on !CONFIG_HAVE_KVM_IRQ_ROUTING. Also,
there may be cases with CONFIG_HAVE_KVM_IRQ_ROUTING, where larger
gsi values make sense.

As the commit was meant as an early indicator to user space that
something is wrong, reverting just restores the previous behavior
where overly large values are ignored when encountered (without
any direct feedback).
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix trivial typo in Kconfig
   - Fixup initialization of mmc block requests

  MMC host:
   - cavium: Fix use-after-free bug reported by KASAN"

* tag 'mmc-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: cavium: Fix use-after-free in of_platform_device_destroy
  mmc: host: fix typo after MMC_DEBUG move
  mmc: block: Fix incorrectly initialized requests

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

The newly added SMB2+ attribute support causes unused function
warnings when CONFIG_CIFS_XATTR is disabled:

fs/cifs/smb2ops.c:563:1: error: 'smb2_set_ea' defined but not used [-Werror=unused-function]
 smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon,
fs/cifs/smb2ops.c:513:1: error: 'smb2_query_eas' defined but not used [-Werror=unused-function]
 smb2_query_eas(const unsigned int xid, struct cifs_tcon *tcon,

This adds another #ifdef around the affected functions.

Fixes: 5517554e ("cifs: Add support for writing attributes on SMB2+")
Fixes: 95907fea ("cifs: Add support for reading attributes on SMB2+")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steve French <smfrench@gmail.com>

With the need to discourage use of less secure dialect, SMB1 (CIFS),
we temporarily upgraded the dialect to SMB3 in 4.13, but since there
are various servers which only support SMB2.1 (2.1 is more secure
than CIFS/SMB1) but not optimal for a default dialect - add support
for multidialect negotiation.  cifs.ko will now request SMB2.1
or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will
pick the latest most secure one it can support.

In addition since we are sending multidialect negotiate, add
support for secure negotiate to validate that a man in the
middle didn't downgrade us.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.13+

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Pull misc fixes from Thomas Gleixner:

  - A fix for a user space regression in /proc/$PID/stat

  - A couple of objtool fixes:
     ~ Plug a memory leak
     ~ Avoid accessing empty sections which upsets certain binutil
       versions
     ~ Prevent corrupting the obj file when section sizes did not change

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fs/proc: Report eip/esp in /prod/PID/stat for coredumping
  objtool: Fix object file corruption
  objtool: Do not retrieve data from empty sections
  objtool: Fix memory leak in elf_create_rela_section()

Pull irq fix from Thomas Gleixner:
 "Fix for an off by one error in a cpumask result comparison"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix cpumask check in __irq_startup_managed()

Pull x86 fix from Thomas Gleixner:
 "A single fix addressing the missing CP8 feature bit in CPUID for a
  range of AMD ZEN models/mask revisions"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/AMD: Fix erratum 1076 (CPB bit)

Pull UBI updates from Richard Weinberger:
 "Minor improvements"

* tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: Fix two typos in comments
  ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate"
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines

Pull UML updates from Richard Weinberger:

 - minor improvements

 - fixes for Debian's new gcc defaults (pie enabled by default)

 - fixes for XSTATE/XSAVE to make UML work again on modern systems

* 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: return negative in tuntap_open_tramp()
  um: remove a stray tab
  um: Use relative modversions with LD_SCRIPT_DYN
  um: link vmlinux with -no-pie
  um: Fix CONFIG_GCOV for modules.
  Fix minor typos and grammar in UML start_up help
  um: defconfig: Cleanup from old Kconfig options
  um: Fix FP register size for XSTATE/XSAVE

Pull networking fixes from David Miller:

 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger.

 2) Fix double-free in rmnet driver, from Dan Carpenter.

 3) INET connection socket layer can double put request sockets, fix
    from Eric Dumazet.

 4) Don't match collect metadata-mode tunnels if the device is down,
    from Haishuang Yan.

 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in
    be2net driver, from Suresh Reddy.

 6) Fix scaling error in gen_estimator, from Eric Dumazet.

 7) Fix 64-bit statistics deadlock in systemport driver, from Florian
    Fainelli.

 8) Fix use-after-free in sctp_sock_dump, from Xin Long.

 9) Reject invalid BPF_END instructions in verifier, from Edward Cree.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  mlxsw: spectrum_router: Only handle IPv4 and IPv6 events
  Documentation: link in networking docs
  tcp: fix data delivery rate
  bpf/verifier: reject BPF_ALU64|BPF_END
  sctp: do not mark sk dumped when inet_sctp_diag_fill returns err
  sctp: fix an use-after-free issue in sctp_sock_dump
  netvsc: increase default receive buffer size
  tcp: update skb->skb_mstamp more carefully
  net: ipv4: fix l3slave check for index returned in IP_PKTINFO
  net: smsc911x: Quieten netif during suspend
  net: systemport: Fix 64-bit stats deadlock
  net: vrf: avoid gcc-4.6 warning
  qed: remove unnecessary call to memset
  tg3: clean up redundant initialization of tnapi
  tls: make tls_sw_free_resources static
  sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
  MAINTAINERS: review Renesas DT bindings as well
  net_sched: gen_estimator: fix scaling error in bytes/packets samples
  nfp: wait for the NSP resource to appear on boot
  nfp: wait for board state before talking to the NSP
  ...

Pull more input updates from Dmitry Torokhov:
 "A second round of updates for the input subsystem:

   - a new driver for PWM-controlled vibrators

   - ucb1400 touchscreen driver had completely busted suspend/resume
     handling

   - we now handle "home" button found on some devices with Goodix
     touchscreens

   - assorted other fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Gigabyte P57 to the keyboard reset table
  Input: xpad - validate USB endpoint type during probe
  Input: ucb1400_ts - fix suspend and resume handling
  Input: edt-ft5x06 - fix access to non-existing register
  Input: elantech - make arrays debounce_packet static, reduces object code size
  Input: surface3_spi - make const array header static, reduces object code size
  Input: goodix - add support for capacitive home button
  Input: add a driver for PWM controllable vibrators
  Input: adi - make array seq static, reduces object code size

The result of cpumask_any_and() is invalid when result greater or equal
nr_cpu_ids. The current check is checking for greater only. Fix it.

Fixes: 761ea388 ("genirq: Handle managed irqs gracefully in irq_startup()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20170913213152.272283444@linutronix.de

Commit 5620a0d1 ("firmware: delete in-kernel firmware") removed the
entire firmware directory.  Unfortunately it thereby also removed the
support for built-in firmware.

This restores the ability to build firmware directly into the kernel by
pruning the original Makefile to the necessary minimum.  The default for
EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/.

Fixes: 5620a0d1 ("firmware: delete in-kernel firmware")
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Greg K-H <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The driver doesn't support events from address families other than IPv4
and IPv6, so ignore them. Otherwise, we risk queueing a work item before
it's initialized.

This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES
is enabled, as the VRF driver will try to add an l3mdev rule for the
IPMR family.

Fixes: 65e65ec1 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Andreas Rammhold <andreas@rammhold.de>
Reported-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix link in filter.txt.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now skb->mstamp_skb is updated later, we also need to call
tcp_rate_skb_sent() after the update is done.

Fixes: 8c72c65b ("tcp: update skb->skb_mstamp more carefully")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 4.14 for MIPS; below a summary of
  the non-merge commits:

  CM:
   - Rename mips_cm_base to mips_gcr_base
   - Specify register size when generating accessors
   - Use BIT/GENMASK for register fields, order & drop shifts
   - Add cluster & block args to mips_cm_lock_other()

  CPC:
   - Use common CPS accessor generation macros
   - Use BIT/GENMASK for register fields, order & drop shifts
   - Introduce register modify (set/clear/change) accessors
   - Use change_*, set_* & clear_* where appropriate
   - Add CM/CPC 3.5 register definitions
   - Use GlobalNumber macros rather than magic numbers
   - Have asm/mips-cps.h include CM & CPC headers
   - Cluster support for topology functions
   - Detect CPUs in secondary clusters

  CPS:
   - Read GIC_VL_IDENT directly, not via irqchip driver

  DMA:
   - Consolidate coherent and non-coherent dma_alloc code
   - Don't use dma_cache_sync to implement fd_cacheflush

  FPU emulation / FP assist code:
   - Another series of 14 commits fixing corner cases such as NaN
     propgagation and other special input values.
   - Zero bits 32-63 of the result for a CLASS.D instruction.
   - Enhanced statics via debugfs
   - Do not use bools for arithmetic. GCC 7.1 moans about this.
   - Correct user fault_addr type

  Generic MIPS:
   - Enhancement of stack backtraces
   - Cleanup from non-existing options
   - Handle non word sized instructions when examining frame
   - Fix detection and decoding of ADDIUSP instruction
   - Fix decoding of SWSP16 instruction
   - Refactor handling of stack pointer in get_frame_info
   - Remove unreachable code from force_fcr31_sig()
   - Convert to using %pOF instead of full_name
   - Remove the R6000 support.
   - Move FP code from *_switch.S to *_fpu.S
   - Remove unused ST_OFF from r2300_switch.S
   - Allow platform to specify multiple its.S files
   - Add #includes to various files to ensure code builds reliable and
     without warning..
   - Remove __invalidate_kernel_vmap_range
   - Remove plat_timer_setup
   - Declare various variables & functions static
   - Abstract CPU core & VP(E) ID access through accessor functions
   - Store core & VP IDs in GlobalNumber-style variable
   - Unify checks for sibling CPUs
   - Add CPU cluster number accessors
   - Prevent direct use of generic_defconfig
   - Make CONFIG_MIPS_MT_SMP default y
   - Add __ioread64_copy
   - Remove unnecessary inclusions of linux/irqchip/mips-gic.h

  GIC:
   - Introduce asm/mips-gic.h with accessor functions
   - Use new GIC accessor functions in mips-gic-timer
   - Remove counter access functions from irq-mips-gic.c
   - Remove gic_read_local_vp_id() from irq-mips-gic.c
   - Simplify shared interrupt pending/mask reads in irq-mips-gic.c
   - Simplify gic_local_irq_domain_map() in irq-mips-gic.c
   - Drop gic_(re)set_mask() functions in irq-mips-gic.c
   - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(),
     gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c.
   - Convert remaining shared reg access, local int mask access and
     remaining local reg access to new accessors
   - Move GIC_LOCAL_INT_* to asm/mips-gic.h
   - Remove GIC_CPU_INT* macros from irq-mips-gic.c
   - Move various definitions to the driver
   - Remove gic_get_usm_range()
   - Remove __gic_irq_dispatch() forward declaration
   - Remove gic_init()
   - Use mips_gic_present() in place of gic_present and remove
     gic_present
   - Move gic_get_c0_*_int() to asm/mips-gic.h
   - Remove linux/irqchip/mips-gic.h
   - Inline __gic_init()
   - Inline gic_basic_init()
   - Make pcpu_masks a per-cpu variable
   - Use pcpu_masks to avoid reading GIC_SH_MASK*
   - Clean up mti, reserved-cpu-vectors handling
   - Use cpumask_first_and() in gic_set_affinity()
   - Let the core set struct irq_common_data affinity

  microMIPS:
   - Fix microMIPS stack unwinding on big endian systems

  MIPS-GIC:
   - SYNC after enabling GIC region

  NUMA:
   - Remove the unused parent_node() macro

  R6:
   - Constify r2_decoder_tables
   - Add accessor & bit definitions for GlobalNumber

  SMP:
   - Constify smp ops
   - Allow boot_secondary SMP op to return errors

  VDSO:
   - Drop gic_get_usm_range() usage
   - Avoid use of linux/irqchip/mips-gic.h

  Platform changes:

  Alchemy:
   - Add devboard machine type to cpuinfo
   - update cpu feature overrides
   - Threaded carddetect irqs for devboards

  AR7:
   - allow NULL clock for clk_get_rate

  BCM63xx:
   - Fix ENETDMA_6345_MAXBURST_REG offset
   - Allow NULL clock for clk_get_rate

  CI20:
   - Enable GPIO and RTC drivers in defconfig
   - Add ethernet and fixed-regulator nodes to DTS

  Generic platform:
   - Move Boston and NI 169445 FIT image source to their own files
   - Include asm/bootinfo.h for plat_fdt_relocated()
   - Include asm/time.h for get_c0_*_int()
   - Include asm/bootinfo.h for plat_fdt_relocated()
   - Include asm/time.h for get_c0_*_int()
   - Allow filtering enabled boards by requirements
   - Don't explicitly disable CONFIG_USB_SUPPORT
   - Bump default NR_CPUS to 16

  JZ4700:
   - Probe the jz4740-rtc driver from devicetree

  Lantiq:
   - Drop check of boot select from the spi-falcon driver.
   - Drop check of boot select from the lantiq-flash MTD driver.
   - Access boot cause register in the watchdog driver through regmap
   - Add device tree binding documentation for the watchdog driver
   - Add docs for the RCU DT bindings.
   - Convert the fpi bus driver to a platform_driver
   - Remove ltq_reset_cause() and ltq_boot_select(
   - Switch to a proper reset driver
   - Switch to a new drivers/soc GPHY driver
   - Add an USB PHY driver for the Lantiq SoCs using the RCU module
   - Use of_platform_default_populate instead of __dt_register_buses
   - Enable MFD_SYSCON to be able to use it for the RCU MFD
   - Replace ltq_boot_select() with dummy implementation.

  Loongson 2F:
   - Allow NULL clock for clk_get_rate

  Malta:
   - Use new GIC accessor functions

  NI 169445:
   - Add support for NI 169445 board.
   - Only include in 32r2el kernels

  Octeon:
   - Add support for watchdog of 78XX SOCs.
   - Add support for watchdog of CN68XX SOCs.
   - Expose support for mips32r1, mips32r2 and mips64r1
   - Enable more drivers in config file
   - Add support for accessing the boot vector.
   - Remove old boot vector code from watchdog driver
   - Define watchdog registers for 70xx, 73xx, 78xx, F75xx.
   - Make CSR functions node aware.
   - Allow access to CIU3 IRQ domains.
   - Misc cleanups in the watchdog driver

  Omega2+:
   - New board, add support and defconfig

  Pistachio:
   - Enable Root FS on NFS in defconfig

  Ralink:
   - Add Mediatek MT7628A SoC
   - Allow NULL clock for clk_get_rate
   - Explicitly request exclusive reset control in the pci-mt7620 PCI driver.

  SEAD3:
   - Only include in 32 bit kernels by default

  VoCore:
   - Add VoCore as a vendor t0 dt-bindings
   - Add defconfig file"

* '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits)
  MIPS: Refactor handling of stack pointer in get_frame_info
  MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems
  MIPS: microMIPS: Fix decoding of swsp16 instruction
  MIPS: microMIPS: Fix decoding of addiusp instruction
  MIPS: microMIPS: Fix detection of addiusp instruction
  MIPS: Handle non word sized instructions when examining frame
  MIPS: ralink: allow NULL clock for clk_get_rate
  MIPS: Loongson 2F: allow NULL clock for clk_get_rate
  MIPS: BCM63XX: allow NULL clock for clk_get_rate
  MIPS: AR7: allow NULL clock for clk_get_rate
  MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset
  mips: Save all registers when saving the frame
  MIPS: Add DWARF unwinding to assembly
  MIPS: Make SAVE_SOME more standard
  MIPS: Fix issues in backtraces
  MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree
  MIPS: Ci20: Enable RTC driver
  watchdog: octeon-wdt: Add support for 78XX SOCs.
  watchdog: octeon-wdt: Add support for cn68XX SOCs.
  watchdog: octeon-wdt: File cleaning.
  ...

Pull PCI fix from Bjorn Helgaas:
 "Revert an attempt to fix a race while enabling upstream bridges
  because it broke iwlwifi firmware loading"

* tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: Avoid race while enabling upstream bridges"

Pull drm AMD fixes from Dave Airlie:
 "Just had a single AMD fixes pull from Alex for rc1"

* tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu: revert "fix deadlock of reservation between cs and gpu reset v2"
  drm/amdgpu: remove duplicate return statement
  drm/amdgpu: check memory allocation failure
  drm/amd/amdgpu: fix BANK_SELECT on Vega10 (v2)
  drm/amdgpu: inline amdgpu_ttm_do_bind again
  drm/amdgpu: fix amdgpu_ttm_bind
  drm/amdgpu: remove the GART copy hack
  drm/ttm:fix wrong decoding of bo_count
  drm/ttm: fix missing inc bo_count
  drm/amdgpu: set sched_hw_submission higher for KIQ (v3)
  drm/amdgpu: move default gart size setting into gmc modules
  drm/amdgpu: refine default gart size
  drm/amd/powerplay: ACG frequency added in PPTable
  drm/amdgpu: discard commands of killed processes
  drm/amdgpu: fix and cleanup shadow handling
  drm/amdgpu: add automatic per asic settings for gart_size
  drm/amdgpu/gfx8: fix spelling typo in mqd allocation
  drm/amd/powerplay: unhalt mec after loading
  drm/amdgpu/virtual_dce: Virtual display doesn't support disable vblank immediately
  drm/amdgpu: Fix huge page updates with CPU