In the current PSE interface for Ethernet Power Equipment, support is
limited to PoDL. This patch extends the interface to accommodate the
objects specified in IEEE 802.3-2022 145.2 for Power sourcing
Equipment (PSE).

The following objects are now supported and considered mandatory:
- IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus
- IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState
- IEEE 802.3-2022 30.9.1.2.1 aPSEAdminControl

To avoid confusion between "PoDL PSE" and "PoE PSE", which have similar
names but distinct values, we have followed the suggestion of Oleksij
Rempel and Andrew Lunn to maintain separate naming schemes for each,
using c33 (clause 33) prefix for "PoE PSE".
You can find more details in the discussion threads here:
https://lore.kernel.org/netdev/20230912110637.GI780075@pengutronix.de/
https://lore.kernel.org/netdev/2539b109-72ad-470a-9dae-9f53de4f64ec@lunn.ch/Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-1-242293fd1900@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-04-17 (ice)

This series contains updates to ice driver only.

Marcin adds Tx malicious driver detection (MDD) events to be included as
part of mdd-auto-reset-vf.

Dariusz removes unnecessary implementation of ndo_get_phys_port_name.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: Remove ndo_get_phys_port_name
  ice: Add automatic VF reset on Tx MDD events
====================

Link: https://lore.kernel.org/r/20240417165634.2081793-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This driver currently doesn't support any control flags.

Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.

In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.

Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144413.104257-1-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This driver currently doesn't support any control flags.

Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.

In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.

Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144407.104241-1-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This driver currently doesn't support any control flags.

Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.

In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.

Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144359.104225-1-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change the check for unsupported control flags, to use the new helper
flow_rule_is_supp_control_flags().

Since the helper was based on sfc, then nothing really changes.

Compile-tested, and compiled objects are identical.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20240417140712.100905-1-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This driver currently doesn't support any control flags.

Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.

In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.

Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240417135131.99921-1-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Test cases need to exit with non-zero status if they failed,
we currently don't do that:

  # KTAP version 1
  # 1..3
  # # At /root/ksft-net-drv/drivers/net/./ping.py line 18:
  # # Check failed 1 != 2
  # not ok 1 ping.test_v4
  # ok 2 ping.test_v6
  # ok 3 ping.test_tcp
  # # Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
  ok 1 selftests: drivers/net: ping.py
  ^^^^

It's a bit tempting to make the exit part of ksft_run(),
but that only works well for very trivial setups. We can
revisit this later, if people forget to call ksft_exit().

Link: https://lore.kernel.org/r/20240417231146.2435572-3-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Totals currently only pay attention to exceptions, if check fails
(say ksft_eq()) the test case will be counted as pass:

  # At /ksft/drivers/net/./ping.py line 18:
  # Check failed 1 != 2
  not ok 1 ping.test_v4
  ok 2 ping.test_v6
  ok 3 ping.test_tcp
  # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
            ^^^^^^^^^^^^^

Pay attention to the result.

Fixes: b86761ff ("selftests: net: add scaffolding for Netlink tests in Python")
Link: https://lore.kernel.org/r/20240417231146.2435572-2-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

include/trace/events/rpcgss.h
  386f4a73 ("trace: events: cleanup deprecated strncpy uses")
  a4833e3a ("SUNRPC: Fix rpcgss_context trace event acceptor field")

Adjacent changes:

drivers/net/ethernet/intel/ice/ice_tc_lib.c
  2cca35f5 ("ice: Fix checking for unsupported keys on non-tunnel device")
  784feaa6 ("ice: Add support for PFCP hardware offload in switchdev")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "A little calmer than usual, probably just the timing of sub-tree PRs.

  Including fixes from netfilter.

  Current release - regressions:

   - inet: bring NLM_DONE out to a separate recv() again, fix user space
     which assumes multiple recv()s will happen and gets blocked forever

   - drv: mlx5:
       - restore mistakenly dropped parts in register devlink flow
       - use channel mdev reference instead of global mdev instance for
         coalescing
       - acquire RTNL lock before RQs/SQs activation/deactivation

  Previous releases - regressions:

   - net: change maximum number of UDP segments to 128, fix virtio
     compatibility with Windows peers

   - usb: ax88179_178a: avoid writing the mac address before first
     reading

  Previous releases - always broken:

   - sched: fix mirred deadlock on device recursion

   - netfilter:
       - br_netfilter: skip conntrack input hook for promisc packets
       - fixes removal of duplicate elements in the pipapo set backend
       - various fixes for abort paths and error handling

   - af_unix: don't peek OOB data without MSG_OOB

   - drv: flower: fix fragment flags handling in multiple drivers

   - drv: ravb: fix jumbo frames and packet stats accounting

  Misc:

   - kselftest_harness: fix Clang warning about zero-length format

   - tun: limit printing rate when illegal packet received by tun dev"

* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
  net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
  net: usb: ax88179_178a: avoid writing the mac address before first reading
  net: ravb: Fix RX byte accounting for jumbo packets
  net: ravb: Fix GbEth jumbo packet RX checksum handling
  net: ravb: Allow RX loop to move past DMA mapping errors
  net: ravb: Count packets instead of descriptors in R-Car RX path
  net: ethernet: mtk_eth_soc: fix WED + wifi reset
  net:usb:qmi_wwan: support Rolling modules
  selftests: kselftest_harness: fix Clang warning about zero-length format
  net/sched: Fix mirred deadlock on device recursion
  netfilter: nf_tables: fix memleak in map from abort path
  netfilter: nf_tables: restore set elements when delete set fails
  netfilter: nf_tables: missing iterator type in lookup walk
  s390/ism: Properly fix receive message buffer allocation
  net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
  net: dsa: mt7530: fix mirroring frames received on local port
  tun: limit printing rate when illegal packet received by tun dev
  ice: Fix checking for unsupported keys on non-tunnel device
  ice: tc: allow zero flags in parsing tc flower
  ice: tc: check src_vsi in case of traffic from VF
  ...

Pull gpio fixes from Bartosz Golaszewski:

 - use -ENOTSUPP consistently in Intel GPIO drivers

 - don't include dt-bindings headers in gpio-swnode code

 - add missing of device table to gpio-lpc32xx and fix autoloading

* tag 'gpio-fixes-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: swnode: Remove wrong header inclusion
  gpio: lpc32xx: fix module autoloading
  gpio: crystalcove: Use -ENOTSUPP consistently
  gpio: wcove: Use -ENOTSUPP consistently

The TX and RX DMA Channels used by the driver to exchange data with CPSW
are not guaranteed to be in a clean state during driver initialization.
The Bootloader could have used the same DMA Channels without cleaning them
up in the event of failure. Thus, reset and disable the DMA Channels to
ensure that they are in a clean state before using them.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Reported-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240417095425.2253876-1-s-vadapalli@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After the commit d2689b6a ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.

In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.

Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.

cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull random number generator fixes from Jason Donenfeld:

 - The input subsystem contributes entropy in some places where a
   spinlock is held, but the entropy accounting code only handled
   callers being in an interrupt or non-atomic process context, but not
   atomic process context. We fix this by removing an optimization and
   just calling queue_work() unconditionally.

 - Greg accidently sent up a patch not intended for his tree and that
   had been nack'd, so that's now reverted.

* tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  Revert "vmgenid: emit uevent when VMGENID updates"
  random: handle creditable entropy from atomic process context

Merge tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

 - amd/pmf: Add SPS notifications quirk (+ quirk support)

 - amd/pmf: Lower Smart PC check message severity

 - x86/ISST: New HW support

 - x86/intel-uncore-freq: Bump minor version to avoid "unsupported" message

 - amd/pmc: New BIOS version still needs Spurious IRQ1 quirk

* tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes
  platform/x86/intel-uncore-freq: Increase minor number support
  platform/x86: ISST: Add Granite Rapids-D to HPM CPU list
  platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14
  platform/x86/amd: pmf: Add infrastructure for quirking supported funcs
  platform/x86/amd: pmf: Decrease error message to debug

This reverts commit ad6bcdad. I had
nak'd it, and Greg said on the thread that it links that he wasn't going
to take it either, especially since it's not his code or his tree, but
then, seemingly accidentally, it got pushed up some months later, in
what looks like a mistake, with no further discussion in the linked
thread. So revert it, since it's clearly not intended.

Fixes: ad6bcdad ("vmgenid: emit uevent when VMGENID updates")
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230531095119.11202-2-bchalios@amazon.esSigned-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

The RSS hash report is a feature that's part of the virtio specification.
Currently, virtio backends like qemu, vdpa (mlx5), and potentially vhost
(still a work in progress as per [1]) support this feature. While the
capability to obtain the RSS hash has been enabled in the normal path,
it's currently missing in the XDP path. Therefore, we are introducing
XDP hints through kfuncs to allow XDP programs to access the RSS hash.

1.
https://lore.kernel.org/all/20231015141644.260646-1-akihiko.odaki@daynix.com/#rSigned-off-by: Liang Chen <liangchen.linux@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240417071822.27831-1-liangchen.linux@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patch #1 amends a missing spot where the set iterator type is unset.
	 This is fixing a issue in the previous pull request.

Patch #2 fixes the delete set command abort path by restoring state
         of the elements. Reverse logic for the activate (abort) case
	 otherwise element state is not restored, this requires to move
	 the check for active/inactive elements to the set iterator
	 callback. From the deactivate path, toggle the next generation
	 bit and from the activate (abort) path, clear the next generation
	 bitmask.

Patch #3 skips elements already restored by delete set command from the
	 abort path in case there is a previous delete element command in
	 the batch. Check for the next generation bit just like it is done
	 via set iteration to restore maps.

netfilter pull request 24-04-18

* tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: fix memleak in map from abort path
  netfilter: nf_tables: restore set elements when delete set fails
  netfilter: nf_tables: missing iterator type in lookup walk
====================

Link: https://lore.kernel.org/r/20240418010948.3332346-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Alex Elder says:

====================
net: ipa: header hygiene

The end result of this series is that the list of files included in
every IPA source file will be maintained in sorted order.  This
imposes some consistency that was previously not possible.

If an IPA header file requires a symbol or type declared in another
header, that other header must be included.  E.g., if bool or u32
type is used in a function declaration in an IPA header file, the
IPA header must include <linux/types.h>.

If a type used is just a struct or union *pointer* or enum type (and
no members within these types are needed), then these types only need
to be *declared* within the header that uses it.

This is sufficient, but in addition, this series removes includes of
files that aren't necessary, as well as unneeded type declarations.
====================

Link: https://lore.kernel.org/r/20240416231018.389520-1-elder@linaro.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Establish the rule that header files are always included in sorted
(POSIX local) order.  Standard and private headers are separated by
a blank line.

Similarly, sort all forward-declarations for structures.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

All of the config data files and all of the register definition
files (plus a few others) use GSI_EE_AP, which is defined in
"ipa_version.h".  Include that header where it's needed.

All of the IPA register definition files include "../ipa.h", though
none of them need anything defined there.  Similarly, all of the GSI
register definition files include "../gsi.h", but don't need anything
defined there.  Remove these unnneded includes.

All of the configuration data files include "../gsi.h", though none
of them need anything defined there, so remove these includes.

Remove other includes of local header files that are not required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

As definitions in headers have been moved around, some of the
struct and enum declarations found in header files have become
no longer necessary and can be removed.  Remove these unneeded
declarations.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Declare some structure types in a few header files where functions
declared therein use them:
  - Functions are declared in "gsi_private.h" that use gsi, gsi_ring, and
    gsi_trans structure pointers.
  - A gsi_trans struct pointer is passed to two functions
    declared in "ipa_endpoint.h"
  - In "ipa_interrupt.h", a platform_device pointer is passed in the
    declaration for ipa_interrupt_init().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The IPA structure contains an ipa_interrupt structure pointer, and
that structure is declared in "ipa.h".  There is no need to include
"ipa_interrupt.h" in that header file.

Instead, include "ipa_interrupt.h" in the three source files (in
addition to "ipa_main.c") that actually use the functions that are
declared there.

Similarly, three files use symbols defined in "ipa_reg.h" but do not
include that file; include it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Some IPA header files include one or more other standard header
files despite not directly needing anything defined in the included
files.  Remove these unnecessary includes.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Some IPA header files use types defined in <linux/types.h>, but do
not include that file:
  - In "ipa_mem.h", the ipa_mem structure has u16 and u32 fields
  - In "ipa_power.h", ipa_power_retention() takes a bool argument,
    and ipa_core_clock_rate() returns u32
  - In "ipa_version.h", ipa_version_supported() returns bool
Include it in these files to satisfy their dependencies.

The ipa_qmi structure (defined in "ipa_qmi.h") contains a work
structure, so include <linux/workqueue.h> in there.

All of the data and register definition files, as well as "reg.h",
use the ARRAY_SIZE() macro.  Include <linux/array_size.h> everywhere
it's used.

Similarly, all register definition files (and a few others) use the
GENMASK() macro, so include <linux/bits.h> to ensure it's defined
where used.  BIT() becomes available by including this file also.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In ibmvnic_xmit() if ibmvnic_tx_scrq_flush() returns H_CLOSED then
it will inform upper level networking functions to disable tx
queues. H_CLOSED signals that the connection with the vnic server is
down and a transport event is expected to recover the device.

Previously, ibmvnic_tx_scrq_flush() was hard-coded to return success.
Therefore, the queues would remain active until ibmvnic_cleanup() is
called within do_reset().

The problem is that do_reset() depends on the RTNL lock. If several
ibmvnic devices are resetting then there can be a long wait time until
the last device can grab the lock. During this time the tx/rx queues
still appear active to upper level functions.

FYI, we do make a call to netif_carrier_off() outside the RTNL lock but
its calls to dev_deactivate() are also dependent on the RTNL lock.

As a result, large amounts of retransmissions were observed in a short
period of time, eventually leading to ETIMEOUT. This was specifically
seen with HNV devices, likely because of even more RTNL dependencies.

Therefore, ensure the return code of ibmvnic_tx_scrq_flush() is
propagated to the xmit function to allow for an earlier (and lock-less)
response to a transport event.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416164128.387920-1-nnac123@linux.ibm.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

neighbour: guarantee the localhost connections be established successfully even the ARP table is full

Inter-process communication on localhost should be established successfully
even the ARP table is full, many processes on server machine use the
localhost to communicate such as command-line interface (CLI),
servers hope all CLI commands can be executed successfully even the arp
table is full. Right now CLI commands got timeout when the arp table is
full. Set the parameter of exempt_from_gc to be true for LOOPBACK net
device to keep localhost neigh in arp table, not removed by gc.

the steps of reproduced:
server with "gc_thresh3 = 1024" setting, ping server from more than 1024
same netmask Lan IPv4 addresses, run "ssh localhost" on console interface,
then the command will get timeout.
Signed-off-by: Zheng Li <James.Z.Li@Dell.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240416095343.540-1-lizheng043@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Paul Barker says:

====================
ravb Ethernet driver bugfixes

These patches fix bugs found during recent work on the ravb driver.

Patches 1 & 2 affect the R-Car code paths so have been tested on an
R-Car M3N Salvator-XS board - this is the only R-Car board I currently
have access to.

Patches 2, 3 & 4 affect the GbEth code paths so have been tested on
RZ/G2L and RZ/G2UL SMARC EVK boards.

Changes v2->v3:
  * Incorporate feedback from Niklas and add Reviewed-by tag to patch
    "net: ravb: Count packets instead of descriptors in R-Car RX path".
Changes v1->v2:
  * Fixed typos in commit message of patch
    "net: ravb: Allow RX loop to move past DMA mapping errors".
  * Added Sergey's Reviewed-by tags.
  * Expanded Cc list as Patchwork complained that I had missed people.
  * Trimmed the call trace in accordance with the docs [1] in patch
    "net: ravb: Fix GbEth jumbo packet RX checksum handling".

[1]: https://docs.kernel.org/process/submitting-patches.html#backtraces-in-commit-messages
====================

Link: https://lore.kernel.org/r/20240416120254.2620-1-paul.barker.ct@bp.renesas.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The RX byte accounting for jumbo packets was changed to fix a potential
use-after-free bug. However, that fix used the wrong variable and so
only accounted for the number of bytes in the final descriptor, not the
number of bytes in the whole packet.

To fix this, we can simply update our stats with the correct number of
bytes before calling napi_gro_receive().

Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future
confusion. The variable name pkt_len is correct in ravb_rx_rcar() as
that function does not handle packets spanning multiple descriptors.

Fixes: 5a5a3e56 ("ravb: Fix potential use-after-free in ravb_rx_gbeth()")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following
backtrace:

	WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38
	Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
	pc : skb_trim+0x30/0x38
	lr : ravb_rx_csum_gbeth+0x40/0x90
	Call trace:
	 skb_trim+0x30/0x38
	 ravb_rx_gbeth+0x56c/0x5cc
	 ravb_poll+0xa0/0x204
	 __napi_poll+0x38/0x17c

This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the
wrong skb for a packet which spans multiple descriptors. To fix this,
use the correct skb.

Fixes: c2da9408 ("ravb: Add Rx checksum offload support for GbEth")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop
iteration if a zero-length descriptor is seen (indicating a DMA mapping
error). However, the current RX descriptor index `priv->cur_rx[q]` was
incremented at the end of the loop and so would not be incremented when
we skip to the next loop iteration. This would cause the loop to keep
seeing the same zero-length descriptor instead of moving on to the next
descriptor.

As the loop counter `i` still increments, the loop would eventually
terminate so there is no risk of being stuck here forever - but we
should still fix this to avoid wasting cycles.

To fix this, the RX descriptor index is incremented at the top of the
loop, in the for statement itself. The assignments of `entry` and `desc`
are brought into the loop to avoid the need for duplication.

Fixes: d8b48911 ("ravb: fix ring memory allocation")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The units of "work done" in the RX path should be packets instead of
descriptors.

Descriptors which are used by the hardware to record error conditions or
are empty in the case of a DMA mapping error should not count towards
our RX work budget.

Also make the limit variable unsigned as it can never be negative.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The WLAN + WED reset sequence relies on being able to receive interrupts from
the card, in order to synchronize individual steps with the firmware.
When WED is stopped, leave interrupts running and rely on the driver turning
off unwanted ones.
WED DMA also needs to be disabled before resetting.

Fixes: f78cd9c7 ("net: ethernet: mtk_wed: update mtk_wed_stop")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.nameSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update the qmi_wwan driver support for the Rolling
LTE modules.

- VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET
interface for /Linux/Chrome OS)
0x0104: RMNET, diag, at, pipe

Here are the outputs of usb-devices:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=33f8 ProdID=0104 Rev=05.04
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling Module
S:  SerialNumber=ba2eb033
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: Vanillan Wang <vanillanwang@163.com>
Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-04-16 (ice)

This series contains updates to ice driver only.

Michal fixes a couple of issues with TC filter parsing; always add match
for src_vsi and remove flag check that could prevent addition of valid
filters.

Marcin adds additional checks for unsupported flower filters.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix checking for unsupported keys on non-tunnel device
  ice: tc: allow zero flags in parsing tc flower
  ice: tc: check src_vsi in case of traffic from VF
====================

Link: https://lore.kernel.org/r/20240416202409.2008383-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Apparently it's more legal to pass the format as NULL, than
it is to use an empty string. Clang complains about empty
formats:

./../kselftest_harness.h:1207:30: warning: format string is empty
[-Wformat-zero-length]
 1207 |            diagnostic ? "%s" : "", diagnostic);
      |                                 ^~
1 warning generated.
Reported-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240409224256.1581292-1-seanjc@google.com
Fixes: 378193ef ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic")
Tested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240416151048.1682352-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TCP_METRICS_CMD_GET and TCP_METRICS_CMD_DEL use their
own locking (tcp_metrics_lock and RCU),
they do not need genl_mutex protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240416162025.1251547-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change tcp_metrics_nl_dump() to return 0 at the end
of a dump so that NLMSG_DONE can be appended
to the current skb, saving one recvmsg() system call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240416161112.1199265-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>