- 21 May, 2005 8 commits
-
-
Suparna Bhattacharya authored
I came across the following problem while running ltp-aiodio testcases from ltp-full-20050405 on linux-2.6.12-rc3-mm3. I tried running the tests with EXT3 as well as JFS filesystems. One or two fsx-linux testcases were hung after some time. These testcases were hanging at wait_for_all_aios(). Debugging shows that there were some iocbs which were not getting completed eventhough the last retry for those returned -EIOCBQUEUED. Also all such pending iocbs represented READ operation. Further debugging revealed that all such iocbs hit EOF in the DIO layer. To be more precise, the "pos" from which they were trying to read was greater than the "size" of the file. So the generic_file_direct_IO returned 0. This happens rarely as there is already a check in __generic_file_aio_read(), for whether "pos" < "size" before calling direct IO routine. >size = i_size_read(inode); >if (pos < size) { > retval = generic_file_direct_IO(READ, iocb, > iov, pos, nr_segs); But for READ, we are taking the inode->i_sem only in the DIO layer. So it is possible that some other process can change the size of the file before we take the i_sem. In such a case ( when "pos" > "size"), the __generic_file_aio_read() would return -EIOCBQUEUED even though there were no I/O requests submitted by the DIO layer. This would cause the AIO layer to expect aio_complete() for THE iocb, which doesnot happen. And thus the test hangs forever, waiting for an I/O completion, where there are no requests submitted at all. The following patch makes __generic_file_aio_read() return 0 (instead of returning -EIOCBQUEUED), on getting 0 from generic_file_direct_IO(), so that the AIO layer does the aio_complete(). Testing: I have tested the patch on a SMP machine(with 2 Pentium 4 (HT)) running linux-2.6.12-rc3-mm3. I ran the ltp-aiodio testcases and none of the fsx-linux tests hung. Also the aio-stress tests ran without any problem. Signed-off-by: Suzuki K P <suzuki@in.ibm.com> Signed-off-by: Suparna Bhattacharya <suparna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Vladimir Saveliev authored
This patch fixes a bug introduced by Al Viro's patch: [patch 136/174] reiserfs endianness: clone struct reiserfs_key The problem is MAX_KEY and MAX_IN_CORE_KEY defined in this patch do not look equal from reiserfs comp_key's point of view. This caused reiserfs' sanity check to complain. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Samuel Thibault authored
In _spin_unlock_bh(lock): do { \ _raw_spin_unlock(lock); \ preempt_enable(); \ local_bh_enable(); \ __release(lock); \ } while (0) there is no reason for using preempt_enable() instead of a simple preempt_enable_no_resched() Since we know bottom halves are disabled, preempt_schedule() will always return at once (preempt_count!=0), and hence preempt_check_resched() is useless here... This fixes it by using "preempt_enable_no_resched()" instead of the "preempt_enable()", and thus avoids the useless preempt_check_resched() just before re-enabling bottom halves. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David Woodhouse authored
with high-speed mode enabled, we switch it to high-speed mode so that baud_base becomes 921600. However, we also need to multiply the baud divisor by 8 at the same time, in case it's already in use as a console. Signed-off-by: David Woodhouse Acked-by: Tom Rini Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Pierre Ossman authored
Defines for the different command classes as defined in the MMC and SD specifications. Removes the check for high command classes and instead checks that the command classes needed are present. Previous solution killed forward compatibility at no apparent gain. Signed-of-by: Pierre Ossman
-
-
- 20 May, 2005 32 commits
-
-
Andi Kleen authored
Needed for the powernow k8 driver for dual core support. Signed-off-by: Andi Kleen <ak@suse.de> Cc: <mark.langsdorf@amd.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
This works around the too fast timer seen on some ATI boards. I don't feel confident enough about it yet to enable it by default, but give users the option. Patch and debugging from Christopher Allen Wing <wingc@engin.umich.edu>, with minor tweaks (renamed the option and documented it) Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
The test case at http://cvs.sourceforge.net/viewcvs.py/posixtest/posixtestsuite/conforman ce/interfaces/clock_nanosleep/1-5.c fails if it runs as a 32bit process on x86_86 machines. The root cause is the sub 32bit process fails to restart the syscall after it is interrupted by a signal. The syscall number of sys_restart_syscall in table sys_call_table is __NR_restart_syscall (219) while it's __NR_ia32_restart_syscall (0) in ia32_sys_call_table. When regs->rax==(unsigned long)-ERESTART_RESTARTBLOCK, function do_signal doesn't distinguish if the process is 64bit or 32bit, and always sets restart syscall number as __NR_restart_syscall (219). Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
We need to hold the vmlist_lock while doing change_page_attr, otherwise we could reset someone else's mapping. Requires previous patch to add __remove_vm_area Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
Caused oopses again. Also fix potential mismatch in checking if change_page_attr was needed. To do it without races I needed to change mm/vmalloc.c to export a __remove_vm_area that does not take vmlist lock. Noticed by Terence Ripperda and based on a patch of his. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
There was a "off by one quad word" error in there. I don't think it is exploitable because it will only store into a unused area, but better to plug it. Found and fixed by John Blackwood Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
- Remove duplicated ifdef - Make core_id match what Intel uses - Initialize phys_proc_id correctly for non DC case - Handle non power of two core numbers. Fixes for both i386 and x86-64 Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul Jackson authored
This patch removes the entwining of cpusets and hotplug code in the "No more Mr. Nice Guy" case of sched.c move_task_off_dead_cpu(). Since the hotplug code is holding a spinlock at this point, we cannot take the cpuset semaphore, cpuset_sem, as would seem to be required either to update the tasks cpuset, or to scan up the nested cpuset chain, looking for the nearest cpuset ancestor that still has some CPUs that are online. So we just punt and blast the tasks cpus_allowed with all bits allowed. This reverts these lines of code to what they were before the cpuset patch. And it updates the cpuset Doc file, to match. The one known alternative to this that seems to work came from Dinakar Guniguntala, and required the hotplug code to take the cpuset_sem semaphore much earlier in its processing. So far as we know, the increased locking entanglement between cpusets and hot plug of this alternative approach is not worth doing in this case. Signed-off-by: Paul Jackson <pj@sgi.com> Acked-by: Nathan Lynch <ntl@pobox.com> Acked-by: Dinakar Guniguntala <dino@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Matt Porter authored
This patch fixed CONFIG_TASK_SIZE handling on 44x. Currently head_44x.S hardcodes 0x80000000, which breaks if user chooses to change TASK_SIZE (e.g. for 3G user-space). Tested on Ocotea in 3G/1G configuration. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kumar Gala authored
Initialization of 8250 serial ports that are platform devices require that at empty entry exists in the array of plat_serial8250_port. With out an empty entry we can get some pretty random behavior. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
From: Al Viro - we have error messages with KERN_ERR in them, so they should be printk-ed rather than printf-ed. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
From: Al Viro - add three-level page table support to fixrange_init. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
Finally rip out the ubd-mmap code, which turned out to be broken by design. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from initrd_user.c file under os-Linux dir and join initrd_user.c and initrd_kern.c files in new file initrd.c Signed-off-by: Gennady Sharapov <Gennady.V.Sharapov@intel.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
From: Oleg Drokin: This patch is needed to support kernel modules that want to use clear_user() (that is exported symbol on all other architectures). Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
Byte-swapping of the port and IP address passed in to the multicast driver by the user used to happen in different places, which was a bug in itself. The port also was swapped before being printk-ed, which led to a misleading message. This patch moves the port swapping to the same place as the IP address swapping. It also cleans up the error paths of mcast_open. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
This patch cleans up the delay implementations a bit, makes the loops unoptimizable, and exports __udelay and __const_udelay. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
Any access to a PROT_NONE page should segfault the process. A JVM seems to do this on purpose. Also, Al noticed some bogus code, which is now deleted. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
Some changes that I sent in didn't make 2.6.12-rc4 for some reason. This adds them back. We have an x86_64 definition of TOP_ADDR a reimplementation of the x86_64 csum_partial_copy_from_user some syntax fixes in arch/um/kernel/ptrace.c removal of a CFLAGS definition in the x86_64 Makefile some include changes in the x86_64 ptrace.c and user-offsets.h a syntax fix in elf-x86_64.h Also moved an include in the i386 and x86_64 Makefiles to make the symlinks work, and some small fixes from Al Viro. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Peter Osterlund authored
If you tried to open a packet device first in read-only mode and then a second time in read-write mode, the second open succeeded even though the device was not correctly set up for writing. If you then tried to write data to the device, the writes would fail with I/O errors. This patch prevents that problem by making the second open fail with -EBUSY. Signed-off-by: Peter Osterlund <petero2@telia.com> Cc: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
James Bottomley authored
The new period/dt setting routines don't get the coupling of these parameters correct. This means that Domain Validation never gets DT set, and thus the drive gets restricted to U80. Fix this by restoring the couplings in the set routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
Tampering with the settings has to be done under the host lock ... slave_alloc isn't called under any lock, so this has to be done explicitly. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
The allocation of all of our components should be done in slave alloc. Currently it's rather fancifully refcounted in the queuecommand callback. This patch moves allocation and destroy to their correct places in slave_alloc/slave_destory. Now we can guarantee that everywhere a device is requested, it's actually been allocated, so don't check for this anymore. Additionally, the per device busy timer was the only source of potential use after free. It's been deleted because Linux does the correct thing with busy returns, so there's no need to implement a separate timer in the driver. Finally, implement code that forces all the device parameters to zero (i.e. async and narrow) in the slave alloc, inform the spi class of the bios recorded maximums and wait until slave configure before trying anything more adventurous. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
This should finish the spurious queue removal from aic7xxx (there are other queues that are probably unnecessary, but at least the major and obviously unnecessary ones are done with). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
This was rendered obsolete by the busyq removal; remove some of the last remnants of its presence. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
pci_alloc_consistent is under 4G by default. Also simplify the definition of bus_dmamap_t. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
There's not much sense in sharing code anymore now that aic7xxx uses various transport class facilities. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
The aic7xxx driver has two spurious queues in it's linux glue code: the busyq which queues incoming commands to the driver and the completeq which queues finished commands before sending them back to the mid-layer This patch just removes the busyq and makes the aic finally return the correct status to get the mid-layer to manage its queueing, so a command is either committed to the sequencer or returned to the midlayer for requeue. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
This is similar to the previous sym2 problem. For Domain Validation to work we can't allow any period setting to turn wide on if it was previously off. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
There's a basic need not to have parameters go under or over certain values when doing domain validation. The basic ones are max_offset, max_width and min_period This patch makes the transport class take and enforce these three limits. Currently they can be set by the user, although they could obviously be read from the HBA's on-board NVRAM area during slave_configure (if it has one). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-