- 17 Sep, 2014 40 commits
-
-
Linus Torvalds authored
commit 99d263d4 upstream. Josef Bacik found a performance regression between 3.2 and 3.10 and narrowed it down to commit bfcfaa77 ("vfs: use 'unsigned long' accesses for dcache name comparison and hashing"). He reports: "The test case is essentially for (i = 0; i < 1000000; i++) mkdir("a$i"); On xfs on a fio card this goes at about 20k dir/sec with 3.2, and 12k dir/sec with 3.10. This is because we spend waaaaay more time in __d_lookup on 3.10 than in 3.2. The new hashing function for strings is suboptimal for < sizeof(unsigned long) string names (and hell even > sizeof(unsigned long) string names that I've tested). I broke out the old hashing function and the new one into a userspace helper to get real numbers and this is what I'm getting: Old hash table had 1000000 entries, 0 dupes, 0 max dupes New hash table had 12628 entries, 987372 dupes, 900 max dupes We had 11400 buckets with a p50 of 30 dupes, p90 of 240 dupes, p99 of 567 dupes for the new hash My test does the hash, and then does the d_hash into a integer pointer array the same size as the dentry hash table on my system, and then just increments the value at the address we got to see how many entries we overlap with. As you can see the old hash function ended up with all 1 million entries in their own bucket, whereas the new one they are only distributed among ~12.5k buckets, which is why we're using so much more CPU in __d_lookup". The reason for this hash regression is two-fold: - On 64-bit architectures the down-mixing of the original 64-bit word-at-a-time hash into the final 32-bit hash value is very simplistic and suboptimal, and just adds the two 32-bit parts together. In particular, because there is no bit shuffling and the mixing boundary is also a byte boundary, similar character patterns in the low and high word easily end up just canceling each other out. - the old byte-at-a-time hash mixed each byte into the final hash as it hashed the path component name, resulting in the low bits of the hash generally being a good source of hash data. That is not true for the word-at-a-time case, and the hash data is distributed among all the bits. The fix is the same in both cases: do a better job of mixing the bits up and using as much of the hash data as possible. We already have the "hash_32|64()" functions to do that. Reported-by:
Josef Bacik <jbacik@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: linux-fsdevel@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Kleiner authored
commit 7820e5ee upstream. Linux 3.16 fixed multiple bugs in kms pageflip completion events and timestamping, which were originally introduced in Linux 3.13. These fixes have been backported to all stable kernels since 3.13. However, the userspace nouveau-ddx needs to be aware if it is running on a kernel on which these bugs are fixed, or not. Bump the patchlevel of the drm driver version to signal this, so backporting this patch to stable 3.13+ kernels will give the ddx the required info. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Mario Kleiner authored
commit 9cba5efa upstream. Vblank irqs don't get disabled during suspend or driver unload, which causes irq delivery after "suspend" or driver unload, at least until the gpu is powered off. This could race with drm_vblank_cleanup() in the case of nouveau and cause a use-after-free bug if the driver is unloaded. More annoyingly during everyday use, at least on nv50 display engine (likely also others), vblank irqs are off after a resume from suspend, but the drm doesn't know this, so all vblank related functionality is dead after a resume. E.g., all windowed OpenGL clients will hang at swapbuffers time, as well as many fullscreen clients in many cases. This makes suspend/resume useless if one wants to use any OpenGL apps after the resume. In Linux 3.16, drm_vblank_on() was added, complementing the older drm_vblank_off() to solve these problems elegantly, so use those calls in nouveaus suspend/resume code. For kernels 3.8 - 3.15, we need to cherry-pick the drm_vblank_on() patch to support this patch. Signed-off-by:
-
Bart Van Assche authored
commit bcc05910 upstream. If scsi_remove_host() is invoked after a SCSI device has been blocked, if the fast_io_fail_tmo or dev_loss_tmo work gets scheduled on the workqueue executing srp_remove_work() and if an I/O request is scheduled after the SCSI device had been blocked by e.g. multipathd then the following deadlock can occur: kworker/6:1 D ffff880831f3c460 0 195 2 0x00000000 Call Trace: [<ffffffff814aafd9>] schedule+0x29/0x70 [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0 [<ffffffff8105af6f>] msleep+0x2f/0x40 [<ffffffff8123b0ae>] __blk_drain_queue+0x4e/0x180 [<ffffffff8123d2d5>] blk_cleanup_queue+0x225/0x230 [<ffffffffa0010732>] __scsi_remove_device+0x62/0xe0 [scsi_mod] [<ffffffffa000ed2f>] scsi_forget_host+0x6f/0x80 [scsi_mod] [<ffffffffa0002eba>] scsi_remove_host+0x7a/0x130 [scsi_mod] [<ffffffffa07cf5c5>] srp_remove_work+0x95/0x180 [ib_srp] [<ffffffff8106d7aa>] process_one_work+0x1ea/0x6c0 [<ffffffff8106dd9b>] worker_thread+0x11b/0x3a0 [<ffffffff810758bd>] kthread+0xed/0x110 [<ffffffff814b972c>] ret_from_fork+0x7c/0xb0 multipathd D ffff880096acc460 0 5340 1 0x00000000 Call Trace: [<ffffffff814aafd9>] schedule+0x29/0x70 [<ffffffff814aa0ef>] schedule_timeout+0x10f/0x2a0 [<ffffffff814ab79b>] io_schedule_timeout+0x9b/0xf0 [<ffffffff814abe1c>] wait_for_completion_io_timeout+0xdc/0x110 [<ffffffff81244b9b>] blk_execute_rq+0x9b/0x100 [<ffffffff8124f665>] sg_io+0x1a5/0x450 [<ffffffff8124fd21>] scsi_cmd_ioctl+0x2a1/0x430 [<ffffffff8124fef2>] scsi_cmd_blk_ioctl+0x42/0x50 [<ffffffffa00ec97e>] sd_ioctl+0xbe/0x140 [sd_mod] [<ffffffff8124bd04>] blkdev_ioctl+0x234/0x840 [<ffffffff811cb491>] block_ioctl+0x41/0x50 [<ffffffff811a0df0>] do_vfs_ioctl+0x300/0x520 [<ffffffff811a1051>] SyS_ioctl+0x41/0x80 [<ffffffff814b9962>] tracesys+0xd0/0xd5 Fix this by scheduling removal work on another workqueue than the transport layer timers. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
David Dillow <dave@thedillows.org> Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Jeff Moyer authored
commit 200612ec upstream. Commit 05f1dd53 ("block: add queue flag for disabling SG merging") introduced a new queue flag: QUEUE_FLAG_NO_SG_MERGE. This gets set by default in blk_mq_init_queue for mq-enabled devices. The effect of the flag is to bypass the SG segment merging. Instead, the bio->bi_vcnt is used as the number of hardware segments. With a device mapper target on top of a device with QUEUE_FLAG_NO_SG_MERGE set, we can end up sending down more segments than a driver is prepared to handle. I ran into this when backporting the virtio_blk mq support. It triggerred this BUG_ON, in virtio_queue_rq: BUG_ON(req->nr_phys_segments + 2 > vblk->sg_elems); The queue's max is set here: blk_queue_max_segments(q, vblk->sg_elems-2); Basically, what happens is that a bio is built up for the dm device (which does not have the QUEUE_FLAG_NO_SG_MERGE flag set) using bio_add_page. That path will call into __blk_recalc_rq_segments, so what you end up with is bi_phys_segments being much smaller than bi_vcnt (and bi_vcnt grows beyond the maximum sg elements). Then, when the bio is submitted, it gets cloned. When the cloned bio is submitted, it will end up in blk_recount_segments, here: if (test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags)) bio->bi_phys_segments = bio->bi_vcnt; and now we've set bio->bi_phys_segments to a number that is beyond what was registered as queue_max_segments by the driver. The right way to fix this is to propagate the queue flag up the stack. The rules for propagating the flag are simple: - if the flag is set for any underlying device, it must be set for the upper device - consequently, if the flag is not set for any underlying device, it should not be set for the upper device. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Roger Quadros authored
commit 40ddbf50 upstream. commit 65b97cf6 introduced in v3.7 caused a regression by using a reversed CS_MASK thus causing omap_calculate_ecc to always fail. As the NAND base driver never checks for .calculate()'s return value, the zeroed ECC values are used as is without showing any error to the user. However, this won't work and the NAND device won't be guarded by any error code. Fix the issue by using the correct mask. Code was tested on omap3beagle using the following procedure - flash the primary bootloader (MLO) from the kernel to the first NAND partition using nandwrite. - boot the board from NAND. This utilizes OMAP ROM loader that relies on 1-bit Hamming code ECC. Fixes: 65b97cf6 (mtd: nand: omap2: handle nand on gpmc) Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Kevin Hao authored
commit a152056c upstream. I got the following panic on my fsl p5020ds board. Unable to handle kernel paging request for data at address 0x7375627379737465 Faulting instruction address: 0xc000000000100778 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=24 CoreNet Generic Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #145 task: c0000000fe080000 ti: c0000000fe088000 task.ti: c0000000fe088000 NIP: c000000000100778 LR: c00000000010073c CTR: 0000000000000000 REGS: c0000000fe08aa00 TRAP: 0300 Not tainted (3.15.0-next-20140613) MSR: 0000000080029000 <CE,EE,ME> CR: 24ad2e24 XER: 00000000 DEAR: 7375627379737465 ESR: 0000000000000000 SOFTE: 1 GPR00: c0000000000c99b0 c0000000fe08ac80 c0000000009598e0 c0000000fe001d80 GPR04: 00000000000000d0 0000000000000913 c000000007902b20 0000000000000000 GPR08: c0000000feaae888 0000000000000000 0000000007091000 0000000000200200 GPR12: 0000000028ad2e28 c00000000fff4000 c0000000007abe08 0000000000000000 GPR16: c0000000007ab160 c0000000007aaf98 c00000000060ba68 c0000000007abda8 GPR20: c0000000007abde8 c0000000feaea6f8 c0000000feaea708 c0000000007abd10 GPR24: c000000000989370 c0000000008c6228 00000000000041ed c0000000fe00a400 GPR28: c00000000017c1cc 00000000000000d0 7375627379737465 c0000000fe001d80 NIP [c000000000100778] .__kmalloc_track_caller+0x70/0x168 LR [c00000000010073c] .__kmalloc_track_caller+0x34/0x168 Call Trace: [c0000000fe08ac80] [c00000000087e6b8] uevent_sock_list+0x0/0x10 (unreliable) [c0000000fe08ad20] [c0000000000c99b0] .kstrdup+0x44/0x90 [c0000000fe08adc0] [c00000000017c1cc] .__kernfs_new_node+0x4c/0x130 [c0000000fe08ae70] [c00000000017d7e4] .kernfs_new_node+0x2c/0x64 [c0000000fe08aef0] [c00000000017db00] .kernfs_create_dir_ns+0x34/0xc8 [c0000000fe08af80] [c00000000018067c] .sysfs_create_dir_ns+0x58/0xcc [c0000000fe08b010] [c0000000002c711c] .kobject_add_internal+0xc8/0x384 [c0000000fe08b0b0] [c0000000002c7644] .kobject_add+0x64/0xc8 [c0000000fe08b140] [c000000000355ebc] .device_add+0x11c/0x654 [c0000000fe08b200] [c0000000002b5988] .add_disk+0x20c/0x4b4 [c0000000fe08b2c0] [c0000000003a21d4] .add_mtd_blktrans_dev+0x340/0x514 [c0000000fe08b350] [c0000000003a3410] .mtdblock_add_mtd+0x74/0xb4 [c0000000fe08b3e0] [c0000000003a32cc] .blktrans_notify_add+0x64/0x94 [c0000000fe08b470] [c00000000039b5b4] .add_mtd_device+0x1d4/0x368 [c0000000fe08b520] [c00000000039b830] .mtd_device_parse_register+0xe8/0x104 [c0000000fe08b5c0] [c0000000003b8408] .of_flash_probe+0x72c/0x734 [c0000000fe08b750] [c00000000035ba40] .platform_drv_probe+0x38/0x84 [c0000000fe08b7d0] [c0000000003599a4] .really_probe+0xa4/0x29c [c0000000fe08b870] [c000000000359d3c] .__driver_attach+0x100/0x104 [c0000000fe08b900] [c00000000035746c] .bus_for_each_dev+0x84/0xe4 [c0000000fe08b9a0] [c0000000003593c0] .driver_attach+0x24/0x38 [c0000000fe08ba10] [c000000000358f24] .bus_add_driver+0x1c8/0x2ac [c0000000fe08bab0] [c00000000035a3a4] .driver_register+0x8c/0x158 [c0000000fe08bb30] [c00000000035b9f4] .__platform_driver_register+0x6c/0x80 [c0000000fe08bba0] [c00000000084e080] .of_flash_driver_init+0x1c/0x30 [c0000000fe08bc10] [c000000000001864] .do_one_initcall+0xbc/0x238 [c0000000fe08bd00] [c00000000082cdc0] .kernel_init_freeable+0x188/0x268 [c0000000fe08bdb0] [c0000000000020a0] .kernel_init+0x1c/0xf7c [c0000000fe08be30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 41bd0010 480000c8 4bf04eb5 60000000 e94d0028 e93f0000 7cc95214 e8a60008 7fc9502a 2fbe0000 419e00c8 e93f0022 <7f7e482a> 39200000 88ed06b2 992d06b2 ---[ end trace b4c9a94804a42d40 ]--- It seems that the corrupted partition header on my mtd device triggers a bug in the ftl. In function build_maps() it will allocate the buffers needed by the mtd partition, but if something goes wrong such as kmalloc failure, mtd read error or invalid partition header parameter, it will free all allocated buffers and then return non-zero. In my case, it seems that partition header parameter 'NumTransferUnits' is invalid. And the ftl_freepart() is a function which free all the partition buffers allocated by build_maps(). Given the build_maps() is a self cleaning function, so there is no need to invoke this function even if build_maps() return with error. Otherwise it will causes the buffers to be freed twice and then weird things would happen. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Pavel Shilovsky authored
commit f736906a upstream. The existing code calls server->ops->close() that is not right. This causes XFS test generic/310 to fail. Fix this by using server->ops->closedir() function. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 1bbe4997 upstream. The existing code uses the old MAX_NAME constant. This causes XFS test generic/013 to fail. Fix it by replacing MAX_NAME with PATH_MAX that SMB1 uses. Also remove an unused MAX_NAME constant definition. Signed-off-by:
-
Pavel Shilovsky authored
commit a07d3220 upstream. CIFS servers process nlink counts differently for files and directories. In cifs_rename() if we the request fails on the existing target, we try to remove it through cifs_unlink() but this is not what we want to do for directories. As the result the following sequence of commands mkdir {1,2}; mv -T 1 2; rmdir {1,2}; mkdir {1,2}; echo foo > 2/bar and XFS test generic/023 fail with -ENOENT error. That's why the second mkdir reuses the existing inode (target inode of the mv -T command) with S_DEAD flag. Fix this by checking whether the target is directory or not and calling cifs_rmdir() rather than cifs_unlink() for directories. Signed-off-by:
-
Pavel Shilovsky authored
commit b46799a8 upstream. When we requests rename we also need to update attributes of both source and target parent directories. Not doing it causes generic/309 xfstest to fail on SMB2 mounts. Fix this by marking these directories for force revalidating. Signed-off-by:
-
Steve French authored
commit 18f39e7b upstream. As Raphael Geissert pointed out, tcon_error_exit can dereference tcon and there is one path in which tcon can be null. Signed-off-by:
Raphael Geissert <geissert@debian.org> Signed-off-by:
-
Pavel Shilovsky authored
commit 038bc961 upstream. If we get into read_into_pages() from cifs_readv_receive() and then loose a network, we issue cifs_reconnect that moves all mids to a private list and issue their callbacks. The callback of the async read request sets a mid to retry, frees it and wakes up a process that waits on the rdata completion. After the connection is established we return from read_into_pages() with a short read, use the mid that was freed before and try to read the remaining data from the a newly created socket. Both actions are not what we want to do. In reconnect cases (-EAGAIN) we should not mask off the error with a short read but should return the error code instead. Acked-by:
Jeff Layton <jlayton@samba.org> Signed-off-by:
-
Pavel Shilovsky authored
commit 21496687 upstream. The existing mapping causes unlink() call to return error after delete operation. Changing the mapping to -EACCES makes the client process the call like CIFS protocol does - reset dos attributes with ATTR_READONLY flag masked off and retry the operation. Signed-off-by:
-
Ilya Dryomov authored
commit c27a3e4d upstream. We hard code cephx auth ticket buffer size to 256 bytes. This isn't enough for any moderate setups and, in case tickets themselves are not encrypted, leads to buffer overflows (ceph_x_decrypt() errors out, but ceph_decode_copy() doesn't - it's just a memcpy() wrapper). Since the buffer is allocated dynamically anyway, allocated it a bit later, at the point where we know how much is going to be needed. Fixes: http://tracker.ceph.com/issues/8979Signed-off-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 597cda35 upstream. Add a helper for processing individual cephx auth tickets. Needed for the next commit, which deals with allocating ticket buffers. (Most of the diff here is whitespace - view with git diff -b). Signed-off-by:
-
Sage Weil authored
commit 73c3d481 upstream. We preallocate a few of the message types we get back from the mon. If we get a larger message than we are expecting, fall back to trying to allocate a new one instead of blindly using the one we have. Signed-off-by:
-
Ilya Dryomov authored
commit 5f740d7e upstream. Determining ->last_piece based on the value of ->page_offset + length is incorrect because length here is the length of the entire message. ->last_piece set to false even if page array data item length is <= PAGE_SIZE, which results in invalid length passed to ceph_tcp_{send,recv}page() and causes various asserts to fire. # cat pages-cursor-init.sh #!/bin/bash rbd create --size 10 --image-format 2 foo FOO_DEV=$(rbd map foo) dd if=/dev/urandom of=$FOO_DEV bs=1M &>/dev/null rbd snap create foo@snap rbd snap protect foo@snap rbd clone foo@snap bar # rbd_resize calls librbd rbd_resize(), size is in bytes ./rbd_resize bar $(((4 << 20) + 512)) rbd resize --size 10 bar BAR_DEV=$(rbd map bar) # trigger a 512-byte copyup -- 512-byte page array data item dd if=/dev/urandom of=$BAR_DEV bs=1M count=1 seek=5 The problem exists only in ceph_msg_data_pages_cursor_init(), ceph_msg_data_pages_advance() does the right thing. The size_t cast is unnecessary. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Chris Mason authored
commit 85e584da upstream. xfs is using truncate_pagecache_range to invalidate the page cache during DIO reads. This is different from the other filesystems who only invalidate pages during DIO writes. truncate_pagecache_range is meant to be used when we are freeing the underlying data structs from disk, so it will zero any partial ranges in the page. This means a DIO read can zero out part of the page cache page, and it is possible the page will stay in cache. buffered reads will find an up to date page with zeros instead of the data actually on disk. This patch fixes things by using invalidate_inode_pages2_range instead. It preserves the page cache invalidation, but won't zero any pages. [dchinner: catch error and warn if it fails. Comment.] Signed-off-by:
Chris Mason <clm@fb.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dave Chinner authored
commit 834ffca6 upstream. Similar to direct IO reads, direct IO writes are using truncate_pagecache_range to invalidate the page cache. This is incorrect due to the sub-block zeroing in the page cache that truncate_pagecache_range() triggers. This patch fixes things by using invalidate_inode_pages2_range instead. It preserves the page cache invalidation, but won't zero any pages. Signed-off-by:
-
Dave Chinner authored
commit 22e757a4 upstream. generic/263 is failing fsx at this point with a page spanning EOF that cannot be invalidated. The operations are: 1190 mapwrite 0x52c00 thru 0x5e569 (0xb96a bytes) 1191 mapread 0x5c000 thru 0x5d636 (0x1637 bytes) 1192 write 0x5b600 thru 0x771ff (0x1bc00 bytes) where 1190 extents EOF from 0x54000 to 0x5e569. When the direct IO write attempts to invalidate the cached page over this range, it fails with -EBUSY and so any attempt to do page invalidation fails. The real question is this: Why can't that page be invalidated after it has been written to disk and cleaned? Well, there's data on the first two buffers in the page (1k block size, 4k page), but the third buffer on the page (i.e. beyond EOF) is failing drop_buffers because it's bh->b_state == 0x3, which is BH_Uptodate | BH_Dirty. IOWs, there's dirty buffers beyond EOF. Say what? OK, set_buffer_dirty() is called on all buffers from __set_page_buffers_dirty(), regardless of whether the buffer is beyond EOF or not, which means that when we get to ->writepage, we have buffers marked dirty beyond EOF that we need to clean. So, we need to implement our own .set_page_dirty method that doesn't dirty buffers beyond EOF. This is messy because the buffer code is not meant to be shared and it has interesting locking issues on the buffer dirty bits. So just copy and paste it and then modify it to suit what we need. Note: the solutions the other filesystems and generic block code use of marking the buffers clean in ->writepage does not work for XFS. It still leaves dirty buffers beyond EOF and invalidations still fail. Hence rather than play whack-a-mole, this patch simply prevents those buffers from being dirtied in the first place. Signed-off-by:
-
Dave Chinner authored
commit 5fd364fe upstream. When running xfs/305, I noticed that quotacheck was flushing dquot buffers that did not have the xfs_dquot_buf_ops verifiers attached: XFS (vdb): _xfs_buf_ioapply: no ops on block 0x1dc8/0x1dc8 ffff880052489000: 44 51 01 04 00 00 65 b8 00 00 00 00 00 00 00 00 DQ....e......... ffff880052489010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ffff880052489020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ffff880052489030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ CPU: 1 PID: 2376 Comm: mount Not tainted 3.16.0-rc2-dgc+ #306 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006fe38000 ffff88004a0ffae8 ffffffff81cf1cca 0000000000000001 ffff88004a0ffb88 ffffffff814d50ca 000010004a0ffc70 0000000000000000 ffff88006be56dc4 0000000000000021 0000000000001dc8 ffff88007c773d80 Call Trace: [<ffffffff81cf1cca>] dump_stack+0x45/0x56 [<ffffffff814d50ca>] _xfs_buf_ioapply+0x3ca/0x3d0 [<ffffffff810db520>] ? wake_up_state+0x20/0x20 [<ffffffff814d51f5>] ? xfs_bdstrat_cb+0x55/0xb0 [<ffffffff814d513b>] xfs_buf_iorequest+0x6b/0xd0 [<ffffffff814d51f5>] xfs_bdstrat_cb+0x55/0xb0 [<ffffffff814d53ab>] __xfs_buf_delwri_submit+0x15b/0x220 [<ffffffff814d6040>] ? xfs_buf_delwri_submit+0x30/0x90 [<ffffffff814d6040>] xfs_buf_delwri_submit+0x30/0x90 [<ffffffff8150f89d>] xfs_qm_quotacheck+0x17d/0x3c0 [<ffffffff81510591>] xfs_qm_mount_quotas+0x151/0x1e0 [<ffffffff814ed01c>] xfs_mountfs+0x56c/0x7d0 [<ffffffff814f0f12>] xfs_fs_fill_super+0x2c2/0x340 [<ffffffff811c9fe4>] mount_bdev+0x194/0x1d0 [<ffffffff814f0c50>] ? xfs_finish_flags+0x170/0x170 [<ffffffff814ef0f5>] xfs_fs_mount+0x15/0x20 [<ffffffff811ca8c9>] mount_fs+0x39/0x1b0 [<ffffffff811e4d67>] vfs_kern_mount+0x67/0x120 [<ffffffff811e757e>] do_mount+0x23e/0xad0 [<ffffffff8117abde>] ? __get_free_pages+0xe/0x50 [<ffffffff811e71e6>] ? copy_mount_options+0x36/0x150 [<ffffffff811e8103>] SyS_mount+0x83/0xc0 [<ffffffff81cfd40b>] tracesys+0xdd/0xe2 This was caused by dquot buffer readahead not attaching a verifier structure to the buffer when readahead was issued, resulting in the followup read of the buffer finding a valid buffer and so not attaching new verifiers to the buffer as part of the read. Also, when a verifier failure occurs, we then read the buffer without verifiers. Attach the verifiers manually after this read so that if the buffer is then written it will be verified that the corruption has been repaired. Further, when flushing a dquot we don't ask for a verifier when reading in the dquot buffer the dquot belongs to. Most of the time this isn't an issue because the buffer is still cached, but when it is not cached it will result in writing the dquot buffer without having the verfier attached. Signed-off-by:
-
Dave Chinner authored
commit 67dc288c upstream. Crash testing of CRC enabled filesystems has resulted in a number of reports of bad CRCs being detected after the filesystem was mounted. Errors such as the following were being seen: XFS (sdb3): Mounting V5 Filesystem XFS (sdb3): Starting recovery (logdev: internal) XFS (sdb3): Metadata CRC error detected at xfs_agf_read_verify+0x5a/0x100 [xfs], block 0x1 XFS (sdb3): Unmount and run xfs_repair XFS (sdb3): First 64 bytes of corrupted metadata buffer: ffff880136ffd600: 58 41 47 46 00 00 00 01 00 00 00 00 00 0f aa 40 XAGF...........@ ffff880136ffd610: 00 02 6d 53 00 02 77 f8 00 00 00 00 00 00 00 01 ..mS..w......... ffff880136ffd620: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 03 ................ ffff880136ffd630: 00 00 00 04 00 08 81 d0 00 08 81 a7 00 00 00 00 ................ XFS (sdb3): metadata I/O error: block 0x1 ("xfs_trans_read_buf_map") error 74 numblks 1 The errors were typically being seen in AGF, AGI and their related btree block buffers some time after log recovery had run. Often it wasn't until later subsequent mounts that the problem was discovered. The common symptom was a buffer with the correct contents, but a CRC and an LSN that matched an older version of the contents. Some debug added to _xfs_buf_ioapply() indicated that buffers were being written without verifiers attached to them from log recovery, and Jan Kara isolated the cause to log recovery readahead an dit's interactions with buffers that had a more recent LSN on disk than the transaction being recovered. In this case, the buffer did not get a verifier attached, and os when the second phase of log recovery ran and recovered EFIs and unlinked inodes, the buffers were modified and written without the verifier running. Hence they had up to date contents, but stale LSNs and CRCs. Fix it by attaching verifiers to buffers we skip due to future LSN values so they don't escape into the buffer cache without the correct verifier attached. This patch is based on analysis and a patch from Jan Kara. Reported-by:
Jan Kara <jack@suse.cz> Reported-by:
Fanael Linithien <fanael4@gmail.com> Reported-by:
Grozdan <neutrino8@gmail.com> Signed-off-by:
-
Doug Ledford authored
commit db1044d4 upstream. added struct sockaddr_storage to rdma_user_cm.h without also adding an include for linux/socket.h to make sure it is defined. Systemtap needs the header files to build standalone and cannot rely on other files to pre-include other headers, so add linux/socket.h to the list of includes in this file. Fixes: ee7aed45 ("RDMA/ucma: Support querying for AF_IB addresses") Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Steve Wise authored
commit 2f0304d2 upstream. If the user creates a listening cm_id with backlog of 0 the IWCM ends up not allowing any connection requests at all. The correct behavior is for the IWCM to pick a default value if the user backlog parameter is zero. Lustre from version 1.8.8 onward uses a backlog of 0, which breaks iwarp support without this fix. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
NeilBrown authored
commit b3968552 upstream. When a raid10 commences a resync/recovery/reshape it allocates some buffer space. When a resync/recovery completes the buffer space is freed. But not when the reshape completes. This can result in a small memory leak. There is a subtle side-effect of this bug. When a RAID10 is reshaped to a larger array (more devices), the reshape is immediately followed by a "resync" of the new space. This "resync" will use the buffer space which was allocated for "reshape". This can cause problems including a "BUG" in the SCSI layer. So this is suitable for -stable. Fixes: 3ea7daa5Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
commit ce0b0a46 upstream. raid10 reshape clears unwanted bits from a bio->bi_flags using a method which, while clumsy, worked until 3.10 when BIO_OWNS_VEC was added. Since then it clears that bit but shouldn't. This results in a memory leak. So change to used the approved method of clearing unwanted bits. As this causes a memory leak which can consume all of memory the fix is suitable for -stable. Fixes: a38352e0 Reported-by: mdraid.pkoch@dfgh.net (Peter Koch) Signed-off-by:
-
NeilBrown authored
commit 9c4bdf69 upstream. During recovery of a double-degraded RAID6 it is possible for some blocks not to be recovered properly, leading to corruption. If a write happens to one block in a stripe that would be written to a missing device, and at the same time that stripe is recovering data to the other missing device, then that recovered data may not be written. This patch skips, in the double-degraded case, an optimisation that is only safe for single-degraded arrays. Bug was introduced in 2.6.32 and fix is suitable for any kernel since then. In an older kernel with separate handle_stripe5() and handle_stripe6() functions the patch must change handle_stripe6(). Fixes: 6c0069c0 Cc: Yuri Tikhonov <yur@emcraft.com> Cc: Dan Williams <dan.j.williams@intel.com> Reported-by:
"Manibalan P" <pmanibalan@amiindia.co.in> Tested-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
NeilBrown authored
commit a40687ff upstream. If a stripe in a raid6 array received a write to each data block while the array is degraded, and if any of these writes to a missing device are not page-aligned, then a live-lock happens. In this case the P and Q blocks need to be read so that the part of the missing block which is *not* being updated by the write can be constructed. Due to a logic error, these blocks are not loaded, so the update cannot proceed and the stripe is 'handled' repeatedly in an infinite loop. This bug is unlikely as most writes are page aligned. However as it can lead to a livelock it is suitable for -stable. It was introduced in 3.16. Fixed: 67f45548Signed-off-by:
-
NeilBrown authored
commit 2446dba0 upstream. Currently we don't abort recovery on a write error if the write error to the recovering device was triggerd by normal IO (as opposed to recovery IO). This means that for one bitmap region, the recovery might write to the recovering device for a few sectors, then not bother for subsequent sectors (as it never writes to failed devices). In this case the bitmap bit will be cleared, but it really shouldn't. The result is that if the recovering device fails and is then re-added (after fixing whatever hardware problem triggerred the failure), the second recovery won't redo the region it was in the middle of, so some of the device will not be recovered properly. If we abort the recovery, the region being processes will be cancelled (bit not cleared) and the whole region will be retried. As the bug can result in data corruption the patch is suitable for -stable. For kernels prior to 3.11 there is a conflict in raid10.c which will require care. Original-from: jiao hui <jiaohui@bwstor.com.cn> Reported-and-tested-by:
jiao hui <jiaohui@bwstor.com.cn> Signed-off-by:
-
Al Viro authored
commit 12a5b529 upstream. Since 3.14 we had copy_tree() get the shadowing wrong - if we had one vfsmount shadowing another (i.e. if A is a slave of B, C is mounted on A/foo, then D got mounted on B/foo creating D' on A/foo shadowed by C), copy_tree() of A would make a copy of D' shadow the the copy of C, not the other way around. It's easy to fix, fortunately - just make sure that mount follows the one that shadows it in mnt_child as well as in mnt_hash, and when copy_tree() decides to attach a new mount, check if the last child it has added to the same parent should be shadowing the new one. And if it should, just use the same logics commit_tree() has - put the new mount into the hash and children lists right after the one that should shadow it. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ilya Dryomov authored
commit bc1ecc65 upstream. While it was never a good idea to sleep in request_fn(), commit 34c6bc2c ("locking/mutexes: Add extra reschedule point") made it a *bad* idea. mutex_lock() since 3.15 may reschedule *before* putting task on the mutex wait queue, which for tasks in !TASK_RUNNING state means block forever. request_fn() may be called with !TASK_RUNNING on the way to schedule() in io_schedule(). Offload request handling to a workqueue, one per rbd device, to avoid calling blocking primitives from rbd_request_fn(). Fixes: http://tracker.ceph.com/issues/8818Signed-off-by:
Eric Eastman <eric0e@aol.com> Tested-by:
Greg Wilson <greg.wilson@keepertech.com> Reviewed-by:
-
Al Viro authored
commit 60bb4529 upstream. If DIO results in short write and sync write fails, we want to bugger off whether the DIO part has written anything or not; the logics on the return will take care of the right return value. Reported-by:
Anton Altaparmakov <aia21@cam.ac.uk> Signed-off-by:
-
Vignesh Raman authored
commit 32333edb upstream. The commits 08c30aca "Bluetooth: Remove RFCOMM session refcnt" and 8ff52f7d "Bluetooth: Return RFCOMM session ptrs to avoid freed session" allow rfcomm_recv_ua and rfcomm_session_close to delete the session (and free the corresponding socket) and propagate NULL session pointer to the upper callers. Additional fix is required to terminate the loop in rfcomm_process_rx function to avoid use of freed 'sk' memory. The issue is only reproducible with kernel option CONFIG_PAGE_POISONING enabled making freed memory being changed and filled up with fixed char value used to unmask use-after-free issues. Signed-off-by:
Vignesh Raman <Vignesh_Raman@mentor.com> Signed-off-by:
Vitaly Kuzmichev <Vitaly_Kuzmichev@mentor.com> Acked-by:
Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Johan Hedberg authored
commit 9f743d74 upstream. Commit 6c53823a reshuffled the way the authentication requirement gets set in the hci_io_capa_request_evt() function, but at the same time it failed to update an if-statement where cp.authentication is used before it has been initialized. The correct value the code should be looking for in this if-statement is conn->auth_type. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Vladimir Davydov authored
commit 093facf3 upstream. If the current process is exiting, lingering on socket close will make it unkillable, so we should avoid it. Reproducer: #include <sys/types.h> #include <sys/socket.h> #define BTPROTO_L2CAP 0 #define BTPROTO_SCO 2 #define BTPROTO_RFCOMM 3 int main() { int fd; struct linger ling; fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP); //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); ling.l_onoff = 1; ling.l_linger = 1000000000; setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling)); return 0; } Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
-
Johan Hedberg authored
commit 6c53823a upstream. When we need to make the decision whether to perform just-works or real user confirmation we need to know the exact local authentication requirement that was passed to the controller. So far conn->auth_type (the local requirement) wasn't in one case updated appropriately in fear of the user confirmation being rejected later. The real problem however was not really that conn->auth_type couldn't represent the true value but that we were checking the local MITM requirement in an incorrect way. It's perfectly fine to let auth_type follow what we tell the controller since we're still tracking the target security level with conn->pending_sec_level. This patch updates the check for local MITM requirement in the hci_user_confirm_request_evt function to use the locally requested security level and ensures that auth_type always represents what we tell the controller. All other code in hci_user_confirm_request_evt still uses the auth_type instead of pending_sec_level for determining whether to do just-works or not, since that's the only value that's in sync with what the remote device knows. Signed-off-by:
Szymon Janc <szymon.janc@tieto.com> Signed-off-by:
-
Marcel Holtmann authored
commit 42bd6a56 upstream. The advertising data and scan response data are merged in the wrong order. It should be advertsing data first and then scan response data and not the other way around. Signed-off-by:
-
Chin-Ran Lo authored
commit 396e04f4 upstream. After BT_CMD_HOST_SLEEP_ENABLE command finishes, driver should wait until getting BT_EVENT_HOST_SLEEP_ENABLE event to complete suspend procedure. Without this patch the suspend handler would return success earlier. By the time when the BT_EVENT_HOST_SLEEP_ENABLE event comes in the controller driver could have already turned off the bus clock. This causes kernel crash or system reboot eventually. Signed-off-by:
Chin-Ran Lo <crlo@marvell.com> Signed-off-by:
Jeff CF Chen <jeffc@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Al Viro authored
commit 81b6b061 upstream. We need the parents of victims alive until namespace_unlock() gets to dput() of the (ex-)mountpoints. However, that screws up the "is it busy" checks in case when we have shrinkable mounts that need to be killed. Solution: go ahead and decrement refcounts of parents right in umount_tree(), increment them again just before dropping rwsem in namespace_unlock() (and let the loop in the end of namespace_unlock() finally drop those references for good, as we do now). Parents can't get freed until we drop rwsem - at least one reference is kept until then, both in case when parent is among the victims and when it is not. So they'll still be around when we get to namespace_unlock(). Signed-off-by:
-
