- 13 Dec, 2018 1 commit
-
-
Shayenne da Luz Moura authored
This patch solves this TODO task: drm_mode_config.crtc_idr is misnamed, since it contains all KMS object. Should be renamed to drm_mode_config.object_idr. Signed-off-by:
Shayenne da Luz Moura <shayenneluzmoura@gmail.com> [danvet: resolve conflict with addition of privobj_list.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181213212957.vkitkyl5cj2qh7qr@smtp.gmail.com
-
- 12 Dec, 2018 3 commits
-
-
Heiko Stuebner authored
Render like lima will attach a fence to the framebuffer dma_buf, so the display driver should wait for it to finish before showing the framebufferto prevent tearing. Generally tested on rk3188, rk3288, rk3328 and rk3399 and together with an actual lima-based kmscube on rk3188 and rk3328. Suggested-by:
Qiang Yu <yuq825@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181130102449.6430-1-heiko@sntech.de
-
Daniel Vetter authored
Doesn't do anything for atomic. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: xen-devel@lists.xen.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181210100359.22507-7-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Doesn't do anything with atomic. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
-
- 11 Dec, 2018 3 commits
-
-
Christian König authored
This completes "drm/syncobj: Drop add/remove_callback from driver interface" and cleans up the implementation a bit. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Link: https://patchwork.freedesktop.org/patch/266255/
-
Christian König authored
The fence seqno is now 64bit, fixes build warning. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
-
Rob Clark authored
Follow the same pattern of locking as with other state objects. This avoids boilerplate in the driver. Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
-
- 10 Dec, 2018 4 commits
-
-
Ville Syrjälä authored
Make sure i2c msgs we're asked to transfer conform to the requirements of REMOTE_I2C_READ. We were only checking that the last message is a read, but we must also check that the preceding messages are all writes. Also check that the length of each message isn't too long. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-2-ville.syrjala@linux.intel.comReviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
-
Ville Syrjälä authored
We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent <brainn@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=108081Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/ast/ast_fb.c: In function 'astfb_create': drivers/gpu/drm/ast/ast_fb.c:194:17: warning: variable 'bo' set but not used [-Wunused-but-set-variable] It never used since introduction in commit 312fec14 ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Daniel Vetter authored
When everyone implements it exactly the same way, among all 4 implementations, there's not really a need to overwrite this at all. Aside: drm_kms_helper_hotplug_event is pretty much core functionality at this point. Probably should move it there. Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
-
- 08 Dec, 2018 2 commits
-
-
Boris Brezillon authored
Add support for X/Y reflection when the plane is using linear or T-tiled formats. X/Y reflection hasn't been tested on SAND formats, so we reject them until proper testing/debugging has been done. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181207083606.15449-2-boris.brezillon@bootlin.com
-
Boris Brezillon authored
Commit 3e407417 ("drm/vc4: Fix X/Y positioning of planes using T_TILES modifier") fixed the problem with T_TILES format, but left things in a non-working state for SAND formats. Address that now. Signed-off-by:
-
- 07 Dec, 2018 8 commits
-
-
Eric Anholt authored
This would be a fairly obscure race, but let's make sure we don't ever lose it. Signed-off-by:
Dave Emett <david.emett@broadcom.com>
-
Eric Anholt authored
This cache was replaced with the slice accessing the L2T in the newer generations. Noted by Dave during review. Signed-off-by:
-
Eric Anholt authored
According to Dave, once you've started an L2T flush, all L2T accesses will be blocked until the flush completes. This fixes a consistent 3-4ms stall between the ioctl and running the job, and 3DMMES Taiji goes from 27fps to 110fps. v2: Leave a note about why we don't need to wait for completion. Signed-off-by:
-
Eric Anholt authored
This is the write combiner for TMU writes. You're supposed to flush that at job end if you had dirtied any cachelines. Flushing it at job start then doesn't make any sense. Signed-off-by:
-
Eric Anholt authored
Now that I've specified how the end-of-pipeline flushing should work, we're never going to use this function. Signed-off-by:
-
Eric Anholt authored
Right now, userspace doesn't do any L2T writes, but we should lay out our expectations for how it works. v2: Explicitly mention the VCD cache flushing requirements and that we'll flush the other caches before each of the CLs. Signed-off-by: -
Mika Kuoppala authored
Many errs of the form: drivers/gpu/drm/i915/selftests/intel_hangcheck.c: In function ‘__igt_reset_evict_vma’: ./include/linux/kern_levels.h:5:18: error: format ‘%x’ expects argument of type ‘unsigned int’, but argum Fixes: b312d8ca ("dma-buf: make fence sequence numbers 64 bit v2") Cc: Christian König <christian.koenig@amd.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Christian König authored
For a lot of use cases we need 64bit sequence numbers. Currently drivers overload the dma_fence structure to store the additional bits. Stop doing that and make the sequence number in the dma_fence always 64bit. For compatibility with hardware which can do only 32bit sequences the comparisons in __dma_fence_is_later only takes the lower 32bits as significant when the upper 32bits are all zero. v2: change the logic in __dma_fence_is_later Signed-off-by:
-
- 06 Dec, 2018 2 commits
-
-
Gerd Hoffmann authored
So qxl kernel patches are sent to the spice-devel list for review. Signed-off-by:
-
Christian König authored
I missed one case during the recent revert of the replace_fence interface change. Fixes: 0b258ed1 drm: revert "expand replace_fence to support timeline point v2" Signed-off-by:
-
- 05 Dec, 2018 1 commit
-
-
Christian König authored
This reverts commit 9a09a423. The whole interface isn't thought through. Since this function can't fail we actually can't allocate an object to store the sync point. Sorry, I should have taken the lead on this from the very beginning and reviewed it more thoughtfully. Going to propose a new interface as a follow up change. Signed-off-by:
-
- 04 Dec, 2018 3 commits
-
-
YueHaibing authored
use kmemdup rather than duplicating its implementation Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/1543471233-159568-1-git-send-email-yuehaibing@huawei.com
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/vkms/vkms_plane.c: In function 'vkms_prepare_fb': drivers/gpu/drm/vkms/vkms_plane.c:144:26: warning: variable 'vkms_obj' set but not used [-Wunused-but-set-variable] It never used since introduction in commit 8ce1bb0b ("drm/vkms: map/unmap buffers in [prepare/cleanup]_fb hooks") Signed-off-by:
-
Jernej Skrabec authored
H6 is first Allwinner SoC which supports 10 bit colors, HDR and AFBC. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-9-jernej.skrabec@siol.net
-
- 03 Dec, 2018 6 commits
-
-
Eric Anholt authored
The core scheduler tells us when the job is pushed to the scheduler's queue, and I had the job_run functions saying when they actually queue the job to the hardware. By adding tracepoints for the very top of the ioctls and the IRQs signaling job completion, "perf record -a -e v3d:.\* -e gpu_scheduler:.\* <job>; perf script" gets you a pretty decent timeline. Signed-off-by:
-
Eric Anholt authored
We shouldn't be returning v3d-render for our new queue. Signed-off-by:
-
Christian König authored
Extract of useful code from the timeline work. Let's use just a single stub fence instance instead of allocating a new one all the time. Signed-off-by:
-
Christian König authored
Extract of useful code from the timeline work. This provides a function to return a stub or dummy fence which is always signaled. Signed-off-by:
-
Alex Gonzalez authored
The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD panel. Signed-off-by:
Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by:
Rob Herring <robh@kernel.org> [treding@nvidia.com: sort new entry alphabetically] Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540480173-12009-2-git-send-email-alex.gonzalez@digi.com
-
Neil Armstrong authored
On the Amlogic GXL & GXM SoCs, a bug occurs on the primary plane when alpha is used where the alpha is not aligned with the pixel content. The workaround Amlogic implemented is to reset the OSD1 plane hardware block each time the plane is (re)enabled, solving the issue. In the reset, we still need to save the content of 2 registers which depends on the status of the plane, in addition to reload the scaler conversion matrix at the same time. Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by:
-
- 30 Nov, 2018 7 commits
-
-
Eric Anholt authored
v3d_bo_get_pages() checks this to decide to map the imported buffer instead of the backing shmem file. The caller was about to set this value anyway, and there's no error path in between. Ideally we wouldn't even allocate the shmem file for our imports, but that's a more invasive fix. Signed-off-by:
-
Eric Anholt authored
They were unused, as Dave Emett noticed in TFU review. Signed-off-by:
-
Eric Anholt authored
The TFU can copy from raster, UIF, and SAND input images to UIF output images, with optional mipmap generation. This will certainly be useful for media EGL image input, but is also useful immediately for mipmap generation without bogging the V3D core down. For now we only run the queue 1 job deep, and don't have any hang recovery (though I don't think we should need it, with TFU). Queuing multiple jobs in the HW will require synchronizing the YUV coefficient regs updates since they don't get FIFOed with the job. v2: Change the ioctl to IOW instead of IOWR, always set COEF0, explain why TFU is AUTH, clarify the syncing docs, drop the unused TFU interrupt regs (you're expected to use the hub's), don't take &bo->base for NULL bos. v3: Fix a little whitespace alignment (noticed by checkpatch), rebase on drm_sched_job_cleanup() changes. Signed-off-by: -
Daniel Vetter authored
I've misplaced two functions by accident: - drm_atomic_helper_duplicate_state is really part of the resume/suspend/shutdown device-wide helpers. - drm_atomic_helper_legacy_gamma_set is part of the legacy ioctl compat helpers. Move them both back. Fixes: 9ef8a9dc ("drm: Extract drm_atomic_state_helper.[hc]") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
-
Sean Paul authored
Kbuild was complaining about: >> drivers/gpu/drm/drm_atomic_helper.c:3169:27: warning: 'state' may be used uninitialized in this function [-Wmaybe-uninitialized] Now state can't actually be used uninitialized, but we'll assign a value anyways so it stops bellyaching. Kbuild config: link: https://lists.01.org/pipermail/kbuild-all/2018-November/055374.html tree: git://anongit.freedesktop.org/drm/drm-misc for-linux-next head: b7ea04d2 commit: b7ea04d2 [4/4] drm: Add DRM_MODESET_LOCK_BEGIN/END helpers config: x86_64-randconfig-x017-201847 (attached as .config) compiler: gcc-7 (Debian 7.3.0-1) 7.3.0 reproduce: git checkout b7ea04d2 # save the attached .config to linux build tree make ARCH=x86_64 Fixes: b7ea04d2 ("drm: Add DRM_MODESET_LOCK_BEGIN/END helpers") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Sean Paul <seanpaul@chromium.org> [seanpaul added extra details on airlied's suggestion] Link: https://patchwork.freedesktop.org/patch/msgid/20181129203652.223634-1-sean@poorly.run
-
Sean Paul authored
Need to pick up the following patch to fix htmldocs build 167bfe53 ("Documentation: drm: Remove dangling pointer from drm-mm.rst") Signed-off-by:
-
Boris Brezillon authored
Now that scaling is allowed on cursor planes, we can also allow YUV formats. Signed-off-by:
-
