atribute  ==> attribute
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use meaningfull micro IPV4_MIN_MTU
Signed-off-by: zhang kai <zhangkaiheb@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This helps validating DTS files.

Introduced changes:
1. Swapped #address-cells and #size-cells values
2. Renamed node: s/enet-gphy/ethernet-phy@/
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Support for SCTP chunks matching on nf_tables, from Phil Sutter.

2) Skip LDMXCSR, we don't need a valid MXCSR state. From Stefano Brivio.

3) CONFIG_RETPOLINE for nf_tables set lookups, from Florian Westphal.

4) A few Kconfig leading spaces removal, from Juerg Haefliger.

5) Remove spinlock from xt_limit, from Jason Baron.

6) Remove useless initialization in xt_CT, oneliner from Yang Li.

7) Tree-wide replacement of netlink_unicast() by nfnetlink_unicast().

8) Reduce footprint of several structures: xt_action_param,
   nft_pktinfo and nf_hook_state, from Florian.

10) Add nft_thoff() and nft_sk() helpers and use them, also from Florian.

11) Fix documentation in nf_tables pipapo avx2, from Florian Westphal.

12) Fix clang-12 fmt string warnings, also from Florian.
====================

Sharath Chandra Vurukala says:

====================
net: qualcomm: rmnet: Enable Mapv5

This series introduces the MAPv5 packet format.

   Patch 0 documents the MAPv4/v5.
   Patch 1 introduces the MAPv5 and the Inline checksum offload for RX/Ingress.
   Patch 2 introduces the MAPv5 and the Inline checksum offload for TX/Egress.

   A new checksum header format is used as part of MAPv5.For RX checksum offload,
   the checksum is verified by the HW and the validity is marked in the checksum
   header of MAPv5. For TX, the required metadata is filled up so hardware can
   compute the checksum.

   v1->v2:
   - Fixed the compilation errors, warnings reported by kernel test robot.
   - Checksum header definition is expanded to support big, little endian
           formats as mentioned by Jakub.

   v2->v3:
   - Fixed compilation errors reported by kernel bot for big endian flavor.

   v3->v4:
   - Made changes to use masks instead of C bit-fields as suggested by Jakub/Alex.

   v4->v5:
   - Corrected checkpatch errors and warnings reported by patchwork.

   v5->v6:
   - Corrected the bug identified by Alex and incorporated all his comments.

   v6->v7:
   - Removed duplicate inclusion of linux/bitfield.h in rmnet_map_data.c

   v7->v8:
   - Have addressed comments given by JAkub on v7 patches.
   - As suggested by Jakub, skb_cow_head() is used instead of expanding
     the head directly. This is now done in  rmnet_map_egress_handler().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding support for MAPv5 egress packets.

This involves adding the MAPv5 header and setting the csum_valid_required
in the checksum header to request HW compute the checksum.

Corresponding stats are incremented based on whether the checksum is
computed in software or HW.

New stat has been added which represents the count of packets whose
checksum is calculated by the HW.
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding support for processing of MAPv5 downlink packets.
It involves parsing the Mapv5 packet and checking the csum header
to know whether the hardware has validated the checksum and is
valid or not.

Based on the checksum valid bit the corresponding stats are
incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY
or left as CHEKSUM_NONE to let network stack revalidate the checksum
and update the respective snmp stats.

Current MAPV1 header has been modified, the reserved field in the
Mapv1 header is now used for next header indication.
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding documentation explaining the new MAPv4/v5 packet formats
and the corresponding checksum offload headers.
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
iwl-next Intel Wired LAN Driver Updates 2021-06-01

This pull request is targeting net-next and rdma-next branches.
These patches have been reviewed by netdev and rdma mailing lists[1].

This series adds RDMA support to the ice driver for E810 devices and
converts the i40e driver to use the auxiliary bus infrastructure
for X722 devices. The PCI netdev drivers register auxiliary RDMA devices
that will bind to auxiliary drivers registered by the new irdma module.

[1] https://lore.kernel.org/netdev/20210520143809.819-1-shiraz.saleem@intel.com/
---
v3:
- ice_aq_add_rdma_qsets(), ice_cfg_vsi_rdma(), ice_[ena|dis]_vsi_rdma_qset(),
and ice_cfg_rdma_fltr() no longer return ice_status
- Remove null check from ice_aq_add_rdma_qsets()

v2:
- Added patch 'i40e: Replace one-element array with flexible-array
member'

Changes since linked review (v6):
- Removed unnecessary checks in i40e_client_device_register() and
i40e_client_device_unregister()
- Simplified the i40e_client_device_register() API
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

informations  ==> information
typicaly  ==> typically
derrive  ==> derive
eventhough  ==> even though
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wierdness  ==> weirdness
multicat  ==> multicast
limite  ==> limit
adddress  ==> address
operater  ==> operator
intial  ==> initial
smaler  ==> smaller
Communcation  ==> Communication
funcitons  ==> functions
everytime  ==> every time
Neigbor  ==> Neighbor
performace  ==> performance
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

possibile  ==> possible
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suppport  ==> Support
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

underlaying  ==> underlying
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CONFIG_IGB_HWMON is n, gcc warns:

drivers/net/ethernet/intel/igb/e1000_82575.c:2765:17:
 warning: ‘e1000_emc_therm_limit’ defined but not used [-Wunused-const-variable=]
 static const u8 e1000_emc_therm_limit[4] = {
                 ^~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/igb/e1000_82575.c:2759:17:
 warning: ‘e1000_emc_temp_data’ defined but not used [-Wunused-const-variable=]
 static const u8 e1000_emc_temp_data[4] = {
                 ^~~~~~~~~~~~~~~~~~~

Move it into #ifdef block to fix this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CONFIG_PCI_IOV is n, make W=1 warns:

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3909:33:
 warning: ‘cxgb4_mgmt_ethtool_ops’ defined but not used [-Wunused-const-variable=]
 static const struct ethtool_ops cxgb4_mgmt_ethtool_ops = {
                                 ^~~~~~~~~~~~~~~~~~~~~~

Move it into #ifdef block to fix this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CONFIG_PROC_FS is n, gcc warns:

drivers/net/hamradio/bpqether.c:437:36:
 warning: ‘bpq_seqops’ defined but not used [-Wunused-const-variable=]
 static const struct seq_operations bpq_seqops = {
                                    ^~~~~~~~~~
Use #ifdef macro to gurad this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On Intel platforms, not all safety features are enabled on the hardware.
The current implementation enable all safety features by default. This
will cause mass error and warning printouts after the module is loaded.

Introduce platform specific safety features flag to enable or disable
each safety features.
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case MICROREAD_CB_TYPE_READER_ALL clang reports a dead code
warning. The error code assigned to variable err is already passed
to async_cb(). The assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Peng Li says:

====================
net: hdlc: clean up some code style issues

This patchset clean up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Braces {} should be used on all arms of this statement.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the chackpatch.pl, comparison to NULL could
be written "!param".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the chackpatch.pl,
EXPORT_SYMBOL(foo); should immediately follow its function/variable.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the checkpatch error as "foo* bar" and should be "foo *bar".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Boris Sukholitko says:

====================
net/sched: act_vlan: Fix modify to allow 0

Currently vlan modification action checks existence of vlan priority by
comparing it to 0. Therefore it is impossible to modify existing vlan
tag to have priority 0.

For example, the following tc command will change the vlan id but will
not affect vlan priority:

tc filter add dev eth1 ingress matchall action vlan modify id 300 \
        priority 0 pipe mirred egress redirect dev eth2

The incoming packet on eth1:

ethertype 802.1Q (0x8100), vlan 200, p 4, ethertype IPv4

will be changed to:

ethertype 802.1Q (0x8100), vlan 300, p 4, ethertype IPv4

although the user has intended to have p == 0.

The fix is to add tcfv_push_prio_exists flag to struct tcf_vlan_params
and rely on it when deciding to set the priority.

The same flag is used to avoid dumping unset vlan priority.

Change Log:
v3 -> v4:
- revert tcf_vlan_get_fill_size change: total size calculation may race vs dump

v2 -> v3:
- Push assumes that the priority is being set
- tcf_vlan_get_fill_size accounts for priority existence

v1 -> v2:
- Do not dump unset priority and fix tests accordingly
- Test for priority 0 modification
====================
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because explicitly being set, the priority 0 should appear
in the output.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dump vlan priority only if it has been previously set.

Fix the tests accordingly.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently vlan modification action checks existence of vlan priority by
comparing it to 0. Therefore it is impossible to modify existing vlan
tag to have priority 0.

For example, the following tc command will change the vlan id but will
not affect vlan priority:

tc filter add dev eth1 ingress matchall action vlan modify id 300 \
        priority 0 pipe mirred egress redirect dev eth2

The incoming packet on eth1:

ethertype 802.1Q (0x8100), vlan 200, p 4, ethertype IPv4

will be changed to:

ethertype 802.1Q (0x8100), vlan 300, p 4, ethertype IPv4

although the user has intended to have p == 0.

The fix is to add tcfv_push_prio_exists flag to struct tcf_vlan_params
and rely on it when deciding to set the priority.

Fixes: 45a497f2 (net/sched: act_vlan: Introduce TCA_VLAN_ACT_MODIFY vlan action)
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a dev_warning message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable 'len' is set to conn_info->max_pkt_payload_len but this
value is never read as it is overwritten with a new value later on,
hence it is a redundant assignment and can be removed.

Clean up the following clang-analyzer warning:

net/nfc/nci/hci.c:164:3: warning: Value stored to 'len' is never read
[clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

variable 'status' is unneeded and it's noneed to check the
return value of function vxge_reset_all_vpaths,so declare
it as void.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support get_pauseparam and set_pauseparam of ethtool_ops.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function 'qlcnic_82xx_hw_write_wx_2M' is declared twice, so remove the
repeated declaration.

Cc: Shahed Shaikh <shshaikh@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the refactoring introduced in commit 87614b93 ("net: enetc:
create a common enetc_pf_to_port helper"), enetc_pf_to_port was coded up
to return -1 in case the passed PCIe device does not have a recognized
BDF.

Make sure the -1 value is checked by the callers, to appease static
checkers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>