- 05 Oct, 2018 32 commits
-
-
Quentin Schulz authored
The Microsemi Ocelot has multiple SerDes and requires that the SerDes be muxed accordingly to the hardware representation. Let's add a constant for each SerDes available in the Microsemi Ocelot. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Quentin Schulz authored
The Microsemi Ocelot has a set of register for SerDes/switch port muxing as well as PCIe muxing for a specific SerDes, so let's add the device and all SerDes in the Device Tree. Reviewed-by:
Paul Burton <paul.burton@mips.com> Signed-off-by:
-
Quentin Schulz authored
Signed-off-by:
-
Quentin Schulz authored
Prepare for upcoming phys that'll handle QSGMII or PCIe. Reviewed-by:
-
Quentin Schulz authored
Since HSIO address space can be accessed by different drivers, let's simplify the register address definitions so that it can be easily used by all drivers and put the register address definition in the include/soc/mscc/ocelot_hsio.h header file. Reviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Quentin Schulz authored
Since HSIO address space can be used by different drivers (PLL, SerDes muxing, temperature sensor), let's move it somewhere it can be included by all drivers. Reviewed-by:
-
Quentin Schulz authored
HSIO address space was moved to a syscon, hence we need to get the regmap of this address space from there and no more from the device node. Reviewed-by:
-
Quentin Schulz authored
HSIO register address space should be handled outside of the MAC controller as there are some registers for PLL5 configuring, SerDes/switch port muxing and a thermal sensor IP, so let's remove it. Acked-by:
-
Quentin Schulz authored
HSIO contains registers for PLL5 configuration, SerDes/switch port muxing and a thermal sensor, hence we can't keep it in the switch DT node. Acked-by:
-
Jakub Sitnicki authored
move_addr_to_kernel() returns only negative values on error, or zero on success. Rewrite the error check to an idiomatic form to avoid confusing the reader. Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Lance Roy authored
ns_poll() used spin_is_locked() + spin_lock() to get achieve the same thing as a spin_trylock(), so simplify it by using that instead. This is also a step towards possibly removing spin_is_locked(). Signed-off-by:
Lance Roy <ldr709@gmail.com> Cc: Chas Williams <3chas3@gmail.com> Cc: <linux-atm-general@lists.sourceforge.net> Cc: <netdev@vger.kernel.org> Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== Fixes, minor changes & cleanups for the Unicast MAC VLAN table This patch-set presents necessary modifications, fixes & cleanups related to Unicast MAC Vlan Table to support revision 0x21 hardware. ==================== Signed-off-by: -
Jian Shen authored
In revision 0x20, we use vlan id != 0 to check whether a vlan tag has been offloaded, so vlan id 0 is not supported. In revision 0x21, rx buffer descriptor adds two bits to indicate whether one or more vlan tags have been offloaded, so vlan id 0 is valid now. This patch seperates the handle for vlan id 0, add vlan id 0 support for revision 0x21. Fixes: 5b5455a9 ("net: hns3: Add STRP_TAGP field support for hardware revision 0x21") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Zhongzhu Liu authored
In revision 0x21, hw supports both ingress and egress vlan filter. This patch adds support for it. Signed-off-by:
Zhongzhu Liu <liuzhongzhu@huawei.com> Signed-off-by:
-
Jian Shen authored
For mta table support has been dropped, remove the code for mta table. Signed-off-by:
-
Jian Shen authored
In previously implement for unicast mac vlan table, the space is shared by all the functions, driver does nothing when the space is exhausted. This patch preallocates the space of unicast mac vlan table for each function by software. Each function can only use its private space and available shared space, avoiding single function exhausts too much space, and other functions are unable to add unicast mac address. Signed-off-by:
-
Jian Shen authored
In original codes, the mac vlan table entries are not cleared when unload hns3 driver. The dirty mac vlan table entries will make the result of looking up mac vlan table being unexpected. When doing core reset or global reset, the firmware will clear all the tables for driver, and driver shouldn't send any commands to firmware during reset. But when doing function reset, the driver needs to clear the tables itself. This patch clears the mac vlan table entries for each client when unload driver or reset. Signed-off-by:
-
Jian Shen authored
The default mask configuration has been done by firmware, so the driver doesn't need to do it any more. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
David Ahern authored
Add ipv4 and ipv6 test cases with an invalid metrics option causing ip_metrics_convert to fail. Tests clean up path during route add. Also, add nodad to to ipv6 address add. When running ipv6_route_metrics directly seeing an occasional failure on the "Using route with mtu metric" test case. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
In case ip_fib_metrics_init() returns an error, we better rewrite rt->fib6_metrics with &dst_default_metrics so that we do not crash later in ip_fib_metrics_put() Fixes: 767a2217 ("net: common metrics init helper for FIB entries") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
-
Willem de Bruijn authored
Avoid the socket lookup cost in udp_gro_receive if no socket has a udp tunnel callback configured. udp_sk(sk)->gro_receive requires a registration with setup_udp_tunnel_sock, which enables the static key. Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the " --v-- fall through --v-- " comment with a proper "fall through", which is what GCC is expecting to find. Addresses-Coverity-ID: 1364476 ("Missing break in switch") Addresses-Coverity-ID: 1364477 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Ganesh Goudar authored
when 32 bit port capability is in use, use FW_PORT_ACTION_L1_CFG32 rather than FW_PORT_ACTION_L1_CFG. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Cong Wang authored
In commit ec3ed293 ("net_sched: change tcf_del_walker() to take idrinfo->lock") we move fl_hw_destroy_tmplt() to a workqueue to avoid blocking with the spinlock held. Unfortunately, this causes a lot of troubles here: 1. tcf_chain_destroy() could be called right after we queue the work but before the work runs. This is a use-after-free. 2. The chain refcnt is already 0, we can't even just hold it again. We can check refcnt==1 but it is ugly. 3. The chain with refcnt 0 is still visible in its block, which means it could be still found and used! 4. The block has a refcnt too, we can't hold it without introducing a proper API either. We can make it working but the end result is ugly. Instead of wasting time on reviewing it, let's just convert the troubling spinlock to a mutex, which allows us to use non-atomic allocations too. Fixes: ec3ed293 ("net_sched: change tcf_del_walker() to take idrinfo->lock") Reported-by:
Ido Schimmel <idosch@idosch.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Tested-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David Ahern authored
Move the attribute parsing from neigh_dump_table to neigh_dump_info, and pass the filter arguments down to neigh_dump_table in a new struct. Add the filter option to proxy neigh dumps as well to make them consistent. Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: Consolidate metrics handling for ipv4 and ipv6 As part of the IPv6 fib info refactoring, the intent was to make metrics handling for ipv6 identical to ipv4. One oversight in ip6_dst_destroy led to confusion and a couple of incomplete attempts at finding and fixing the resulting memory leak which was ultimately resolved by ce7ea4af ("ipv6: fix memory leak on dst->_metrics"). Refactor metrics hanlding make the code really identical for v4 and v6, and add a few test cases. ==================== Signed-off-by:
-
David Ahern authored
Add ipv4 and ipv6 test cases for metrics (mtu) when fib entries are created. Can be used with kmemleak to see leaks with both fib entries and dst_entry. Signed-off-by:
-
David Ahern authored
Move the refcounting and potential free of dst metrics associated for ipv4 and ipv6 to a common helper. Signed-off-by:
-
David Ahern authored
ipv4 and ipv6 both use refcounted metrics if FIB entries have metrics set. Move the common initialization code to a helper and use for both protocols. Signed-off-by:
-
David Ahern authored
Move the refcounting and potential free of dst metrics associated with a fib entry to a helper and use it in both ipv4 and ipv6. Signed-off-by:
-
David Ahern authored
Consolidate initialization of ipv4 and ipv6 metrics when fib entries are created into a single helper, ip_fib_metrics_init, that handles the call to ip_metrics_convert. If no metrics are defined for the fib entry, then the metrics is set to dst_default_metrics. Signed-off-by:
-
Jakub Kicinski authored
tcf_block_dev() doesn't seem to be used anywhere in the tree. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
- 04 Oct, 2018 8 commits
-
-
Hangbin Liu authored
As Michal remaind, we should allow to clear ttl inherit. Then we will have three states: 1. set the flag, and do ttl inherit. 2. do not set the flag, use configured ttl value, or default ttl (0) if not set. 3. disable ttl inherit, use previous configured ttl value, or default ttl (0). Fixes: 52d0d404 ("geneve: add ttl inherit support") CC: Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Vinicius Costa Gomes authored
This traffic scheduler allows traffic classes states (transmission allowed/not allowed, in the simplest case) to be scheduled, according to a pre-generated time sequence. This is the basis of the IEEE 802.1Qbv specification. Example configuration: tc qdisc replace dev enp3s0 parent root handle 100 taprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ base-time 1528743495910289987 \ sched-entry S 01 300000 \ sched-entry S 02 300000 \ sched-entry S 04 300000 \ clockid CLOCK_TAI The configuration format is similar to mqprio. The main difference is the presence of a schedule, built by multiple "sched-entry" definitions, each entry has the following format: sched-entry <CMD> <GATE MASK> <INTERVAL> The only supported <CMD> is "S", which means "SetGateStates", following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK> is a bitmask where each bit is a associated with a traffic class, so bit 0 (the least significant bit) being "on" means that traffic class 0 is "active" for that schedule entry. <INTERVAL> is a time duration in nanoseconds that specifies for how long that state defined by <CMD> and <GATE MASK> should be held before moving to the next entry. This schedule is circular, that is, after the last entry is executed it starts from the first one, indefinitely. The other parameters can be defined as follows: - base-time: specifies the instant when the schedule starts, if 'base-time' is a time in the past, the schedule will start at base-time + (N * cycle-time) where N is the smallest integer so the resulting time is greater than "now", and "cycle-time" is the sum of all the intervals of the entries in the schedule; - clockid: specifies the reference clock to be used; The parameters should be similar to what the IEEE 802.1Q family of specification defines. Signed-off-by:Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
David S. Miller authored
Vasundhara Volam says: ==================== bnxt_en: devlink param updates This patchset adds support for 3 generic and 1 driver-specific devlink parameters. Add documentation for these configuration parameters. Also, this patchset adds support to return proper error code if HWRM_NVM_GET/SET_VARIABLE commands return error code HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED. v3->v4: -Remove extra definition of NVM_OFF_HW_TC_OFFLOAD from bnxt_devlink.h -Remove type information for generic parameters from devlink-params-bnxt.txt v2->v3: -Remove description of generic parameters from devlink-params-bnxt.txt v1->v2: -Remove hw_tc_offload parameter. -Update all patches with Cc of MAINTAINERS. -Add more description in commit message for device specific parameter. -Add a new Documentation/networking/devlink-params.txt with some generic devlink parameters information. -Add a new Documentation/networking/devlink-params-bnxt.txt with devlink parameters information that are supported by bnxt_en driver. ==================== Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Vasundhara Volam authored
This patch adds a new file to add information about configuration parameters that are supported by bnxt_en driver via devlink. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
This patch adds a new file to add information about some of the generic configuration parameters set via devlink. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
This patch adds following driver-specific permanent mode boolean parameter. gre_ver_check - Generic Routing Encapsulation(GRE) version check will be enabled in the device. If disabled, device skips version checking for GRE packets. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
This patch adds support for following generic permanent mode devlink parameters. They can be modified using devlink param commands. msix_vec_per_pf_max - This param sets the number of MSIX vectors that the device requests from the host on driver initialization. This value is set in the device which limits MSIX vectors per PF. msix_vec_per_pf_min - This param sets the number of minimal MSIX vectors required for the device initialization. Value 0 indicates a default value is selected. This value is set in the device which limits MSIX vectors per PF. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
Return proper error code when Firmware returns HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED for HWRM_NVM_GET/SET_VARIABLE commands. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
