- 09 Dec, 2017 12 commits
-
-
Hiromitsu Yamasaki authored
[ Upstream commit 36735783 ] DMA supports 32-bit words only, even if BITLEN1 of SITMDR2 register is 16bit. Fixes: b0d0ce8b ("spi: sh-msiof: Add DMA support") Signed-off-by:
Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Wunner authored
[ Upstream commit 3236a965 ] This driver's ->rs485_config callback checks if SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND have the same value. If they do, it means the user has passed in invalid data with the TIOCSRS485 ioctl() since RTS must have a different polarity when sending and when not sending. In this case, rs485 mode is not enabled (the RS485_URA bit is not set in the RS485 Enable Register) and this is supposed to be signaled back to the user by clearing the SER_RS485_ENABLED bit in struct serial_rs485 ... except a missing tilde character is preventing that from happening. Fixes: 28e3fb6c ("serial: Add support for Fintek F81216A LPC to 4 UART") Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commit fec8f5ae ] We weren't testing the .limit and .limit_in_pages fields very well. Add more tests. This addition seems to trigger the "bits 16:19 are undefined" issue that was fixed in an earlier patch. I think that, at least on my CPU, the high nibble of the limit ends in LAR bits 16:19. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5601c15ea9b3113d288953fd2838b18bedf6bc67.1509794321.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Christian Borntraeger authored
[ Upstream commit 48070c73 ] As of today QEMU does not provide the AIS facility to its guest. This prevents Linux guests from using PCI devices as the ais facility is checked during init. As this is just a performance optimization, we can move the ais check into the code where we need it (calling the SIC instruction). This is used at initialization and on interrupt. Both places do not require any serialization, so we can simply skip the instruction. Since we will now get all interrupts, we can also avoid the 2nd scan. As we can have multiple interrupts in parallel we might trigger spurious irqs more often for the non-AIS case but the core code can handle that. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by:
Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Boshi Wang authored
[ Upstream commit ebe7c0a7 ] The hash_setup function always sets the hash_setup_done flag, even when the hash algorithm is invalid. This prevents the default hash algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used. This patch sets hash_setup_done flag only for valid hash algorithms. Fixes: e7a2ad7e "ima: enable support for larger default filedata hash algorithms" Signed-off-by:
Boshi Wang <wangboshi@huawei.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Sjoholm authored
commit c654b21e upstream. Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to option.c to allow DIAG,GPS,AT and modem communication with the BG96. Signed-off-by:
Sebastian Sjoholm <ssjoholm@mac.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Heiko Carstens authored
commit 8d9047f8 upstream. Free data structures required for runtime instrumentation from arch_release_task_struct(). This allows to simplify the code a bit, and also makes the semantics a bit easier: arch_release_task_struct() is never called from the task that is being removed. In addition this allows to get rid of exit_thread() in a later patch. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Matt Wilson authored
commit 3bfd1300 upstream. This device will be used in future Amazon EC2 instances as the primary serial port (i.e., data sent to this port will be available via the GetConsoleOuput [1] EC2 API). [1] http://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetConsoleOutput.htmlSigned-off-by:
Matt Wilson <msw@amazon.com> Signed-off-by:
-
Kai-Heng Feng authored
commit e43a12f1 upstream. KY-688 USB 3.1 Type-C Hub internally uses a Genesys Logic hub to connect to Realtek r8153. Similar to commit ("7496cfe5 usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter"), no-lpm can make r8153 ethernet work. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Hans de Goede authored
commit 7fee72d5 upstream. We've been adding this as a quirk on a per device basis hoping that newer disk enclosures would do better, but that has not happened, so simply apply this quirk to all Seagate devices. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Rui Hua authored
commit e393aa24 upstream. When we send a read request and hit the clean data in cache device, there is a situation called cache read race in bcache(see the commit in the tail of cache_look_up(), the following explaination just copy from there): The bucket we're reading from might be reused while our bio is in flight, and we could then end up reading the wrong data. We guard against this by checking (in bch_cache_read_endio()) if the pointer is stale again; if so, we treat it as an error (s->iop.error = -EINTR) and reread from the backing device (but we don't pass that error up anywhere) It should be noted that cache read race happened under normal circumstances, not the circumstance when SSD failed, it was counted and shown in /sys/fs/bcache/XXX/internal/cache_read_races. Without this patch, when we use writeback mode, we will never reread from the backing device when cache read race happened, until the whole cache device is clean, because the condition (s->recoverable && (dc && !atomic_read(&dc->has_dirty))) is false in cached_dev_read_error(). In this situation, the s->iop.error(= -EINTR) will be passed up, at last, user will receive -EINTR when it's bio end, this is not suitable, and wield to up-application. In this patch, we use s->read_dirty_data to judge whether the read request hit dirty data in cache device, it is safe to reread data from the backing device when the read request hit clean data. This can not only handle cache read race, but also recover data when failed read request from cache device. [edited by mlyle to fix up whitespace, commit log title, comment spelling] Fixes: d59b2379 ("bcache: only permit to recovery read error when cache device is clean") Signed-off-by:
Hua Rui <huarui.dev@gmail.com> Reviewed-by:
Michael Lyle <mlyle@lyle.org> Reviewed-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Coly Li authored
commit d59b2379 upstream. When bcache does read I/Os, for example in writeback or writethrough mode, if a read request on cache device is failed, bcache will try to recovery the request by reading from cached device. If the data on cached device is not synced with cache device, then requester will get a stale data. For critical storage system like database, providing stale data from recovery may result an application level data corruption, which is unacceptible. With this patch, for a failed read request in writeback or writethrough mode, recovery a recoverable read request only happens when cache device is clean. That is to say, all data on cached device is up to update. For other cache modes in bcache, read request will never hit cached_dev_read_error(), they don't need this patch. Please note, because cache mode can be switched arbitrarily in run time, a writethrough mode might be switched from a writeback mode. Therefore checking dc->has_data in writethrough mode still makes sense. Changelog: V4: Fix parens error pointed by Michael Lyle. v3: By response from Kent Oversteet, he thinks recovering stale data is a bug to fix, and option to permit it is unnecessary. So this version the sysfs file is removed. v2: rename sysfs entry from allow_stale_data_on_failure to allow_stale_data_on_failure, and fix the confusing commit log. v1: initial patch posted. [small change to patch comment spelling by mlyle] Signed-off-by:
Arne Wolf <awolf@lenovo.com> Reviewed-by:
-
- 05 Dec, 2017 28 commits
-
-
Greg Kroah-Hartman authored
-
Trond Myklebust authored
commit d8a1a000 upstream. If nfsd4_process_open2() is initialising a new stateid, and yet the call to nfs4_get_vfs_file() fails for some reason, then we must declare the stateid closed, and unhash it before dropping the mutex. Right now, we unhash the stateid after dropping the mutex, and without changing the stateid type, meaning that another OPEN could theoretically look it up and attempt to use it. Reported-by:
Andrew W Elble <aweits@rit.edu> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit 15ca08d3 upstream. Open file stateids can linger on the nfs4_file list of stateids even after they have been closed. In order to avoid reusing such a stateid, and confusing the client, we need to recheck the nfs4_stid's type after taking the mutex. Otherwise, we risk reusing an old stateid that was already closed, which will confuse clients that expect new stateids to conform to RFC7530 Sections 9.1.4.2 and 16.2.5 or RFC5661 Sections 8.2.2 and 18.2.4. Signed-off-by:
-
Oleg Drokin authored
commit 8c7245ab upstream. Move the state selection logic inside from the caller, always making it return correct stp to use. Signed-off-by:
J . Bruce Fields <bfields@fieldses.org> Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
-
Ville Syrjälä authored
commit 56350fb8 upstream. The hardware always writes one or two bytes in the index portion of an indexed transfer. Make sure the message we send as the index doesn't have a zero length. Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 56f9eac0 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171123194157.25367-3-ville.syrjala@linux.intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit bb9e0d4b) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit ae5c631e upstream. We can only specify the one slave address to indexed reads/writes. Make sure the messages we check are destined to the same slave address before deciding to do an indexed transfer. Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 56f9eac0 ("drm/i915/intel_i2c: use INDEX cycles for i2c read transactions") Signed-off-by:
-
NeilBrown authored
commit b688741c upstream. For correct close-to-open semantics, NFS must validate the change attribute of a directory (or file) on open. Since commit ecf3d1f1 ("vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op"), open() of "." or a path ending ".." is not revalidated reliably (except when that direct is a mount point). Prior to that commit, "." was revalidated using nfs_lookup_revalidate() which checks the LOOKUP_OPEN flag and forces revalidation if the flag is set. Since that commit, nfs_weak_revalidate() is used for NFSv3 (which ignores the flags) and nothing is used for NFSv4. This is fixed by using nfs_lookup_verify_inode() in nfs_weak_revalidate(). This does the revalidation exactly when needed. Also, add a definition of .d_weak_revalidate for NFSv4. The incorrect behavior is easily demonstrated by running "echo *" in some non-mountpoint NFS directory while watching network traffic. Without this patch, "echo *" sometimes doesn't produce any traffic. With the patch it always does. Fixes: ecf3d1f1 ("vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op") cc: stable@vger.kernel.org (3.9+) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Brent Taylor authored
commit 30863e38 upstream. When mtdoops calls mtd_panic_write(), it eventually calls panic_nand_write() in nand_base.c. In order to properly wait for the nand chip to be ready in panic_nand_wait(), the chip must first be selected. When using the atmel nand flash controller, a panic would occur due to a NULL pointer exception. Fixes: 2af7c653 ("mtd: Add panic_write for NAND flashes") Cc: <stable@vger.kernel.org> Signed-off-by:
Brent Taylor <motobud@gmail.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Jonathan Liu authored
commit f3621a8e upstream. During panel removal or system shutdown panel_simple_disable() is called which disables the panel backlight but the panel is still powered due to missing calls to panel_simple_unprepare(). Fixes: d02fd93e ("drm/panel: simple - Disable panel on shutdown") Signed-off-by:
Jonathan Liu <net147@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170807115545.27747-1-net147@gmail.comSigned-off-by:
-
Roman Kapl authored
commit 4f626a4a upstream. The function for byteswapping the data send to/from atombios was buggy for num_bytes not divisible by four. The function must be aware of the fact that after byte-swapping the u32 units, valid bytes might end up after the num_bytes boundary. This patch was tested on kernel 3.12 and allowed us to sucesfully use DisplayPort on and Radeon SI card. Namely it fixed the link training and EDID readout. The function is patched both in radeon and amd drivers, since the functions and the fixes are identical. Signed-off-by:
Roman Kapl <rka@sysgo.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 18c437ca upstream. Fixes distorted colors on some cards on resume from suspend. This reverts commit b9729b17. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=98832 Bug: https://bugs.freedesktop.org/show_bug.cgi?id=99163 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=107001Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Huacai Chen authored
commit cf33c1ee upstream. This patch try to fix the building error on MIPS. The reason is MIPS has already defined the PTR macro, which conflicts with the PTR macro in include/uapi/linux/bcache.h. [fixed by mlyle: corrected a line-length issue] Signed-off-by:
Huacai Chen <chenhc@lemote.com> Reviewed-by:
-
Heiner Kallweit authored
commit d9bcd462 upstream. So far we completely rely on the caller to provide valid arguments. To be on the safe side perform an own sanity check. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
-
Adrian Hunter authored
commit ebe7dd45 upstream. The block driver must be resumed if the mmc bus fails to suspend the card. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Paolo Bonzini authored
commit 6ea6e843 upstream. Sometimes, a processor might execute an instruction while another processor is updating the page tables for that instruction's code page, but before the TLB shootdown completes. The interesting case happens if the page is in the TLB. In general, the processor will succeed in executing the instruction and nothing bad happens. However, what if the instruction is an MMIO access? If *that* happens, KVM invokes the emulator, and the emulator gets the updated page tables. If the update side had marked the code page as non present, the page table walk then will fail and so will x86_decode_insn. Unfortunately, even though kvm_fetch_guest_virt is correctly returning X86EMUL_PROPAGATE_FAULT, x86_decode_insn's caller treats the failure as a fatal error if the instruction cannot simply be reexecuted (as is the case for MMIO). And this in fact happened sometimes when rebooting Windows 2012r2 guests. Just checking ctxt->have_exception and injecting the exception if true is enough to fix the case. Thanks to Eduardo Habkost for helping in the debugging of this issue. Reported-by:
Yanan Fu <yfu@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Liran Alon authored
commit 61cb57c9 upstream. Instruction emulation after trapping a #UD exception can result in an MMIO access, for example when emulating a MOVBE on a processor that doesn't support the instruction. In this case, the #UD vmexit handler must exit to user mode, but there wasn't any code to do so. Add it for both VMX and SVM. Signed-off-by:
Liran Alon <liran.alon@oracle.com> Reviewed-by:
Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Reviewed-by:
-
Liran Alon authored
commit 51c4b8bb upstream. When guest passes KVM it's pvclock-page GPA via WRMSR to MSR_KVM_SYSTEM_TIME / MSR_KVM_SYSTEM_TIME_NEW, KVM don't initialize pvclock-page to some start-values. It just requests a clock-update which will happen before entering to guest. The clock-update logic will call kvm_setup_pvclock_page() to update the pvclock-page with info. However, kvm_setup_pvclock_page() *wrongly* assumes that the version-field is initialized to an even number. This is wrong because at first-time write, field could be any-value. Fix simply makes sure that if first-time version-field is odd, increment it once more to make it even and only then start standard logic. This follows same logic as done in other pvclock shared-pages (See kvm_write_wall_clock() and record_steal_time()). Signed-off-by:
-
Josef Bacik authored
commit 8e138e0d upstream. We discovered a box that had double allocations, and suspected the space cache may be to blame. While auditing the write out path I noticed that if we've already setup the space cache we will just carry on. This means that any error we hit after cache_save_setup before we go to actually write the cache out we won't reset the inode generation, so whatever was already written will be considered correct, except it'll be stale. Fix this by _always_ resetting the generation on the block group inode, this way we only ever have valid or invalid cache. With this patch I was no longer able to reproduce cache corruption with dm-log-writes and my bpf error injection tool. Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
chenjie authored
commit 6ea8d958 upstream. MADVISE_WILLNEED has always been a noop for DAX (formerly XIP) mappings. Unfortunately madvise_willneed() doesn't communicate this information properly to the generic madvise syscall implementation. The calling convention is quite subtle there. madvise_vma() is supposed to either return an error or update &prev otherwise the main loop will never advance to the next vma and it will keep looping for ever without a way to get out of the kernel. It seems this has been broken since introduction. Nobody has noticed because nobody seems to be using MADVISE_WILLNEED on these DAX mappings. [mhocko@suse.com: rewrite changelog] Link: http://lkml.kernel.org/r/20171127115318.911-1-guoxuenan@huawei.com Fixes: fe77ba6f ("[PATCH] xip: madvice/fadvice: execute in place") Signed-off-by:
chenjie <chenjie6@huawei.com> Signed-off-by:
guoxuenan <guoxuenan@huawei.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: zhangyi (F) <yi.zhang@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Shaohua Li <shli@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kirill A. Shutemov authored
commit a8f97366 upstream. Currently, we unconditionally make page table dirty in touch_pmd(). It may result in false-positive can_follow_write_pmd(). We may avoid the situation, if we would only make the page table entry dirty if caller asks for write access -- FOLL_WRITE. The patch also changes touch_pud() in the same way. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Matt Fleming authored
commit e2c90dd7 upstream. Môshe reported the following warning triggered on his machine since commit 50a0cb56 ("x86/efi-bgrt: Fix kernel panic when mapping BGRT data"), [ 0.026936] ------------[ cut here ]------------ [ 0.026941] WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:137 __early_ioremap+0x102/0x1bb() [ 0.026941] Modules linked in: [ 0.026944] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc1 #2 [ 0.026945] Hardware name: Dell Inc. XPS 13 9343/09K8G1, BIOS A05 07/14/2015 [ 0.026946] 0000000000000000 900f03d5a116524d ffffffff81c03e60 ffffffff813a3fff [ 0.026948] 0000000000000000 ffffffff81c03e98 ffffffff810a0852 00000000d7b76000 [ 0.026949] 0000000000000000 0000000000000001 0000000000000001 000000000000017c [ 0.026951] Call Trace: [ 0.026955] [<ffffffff813a3fff>] dump_stack+0x44/0x55 [ 0.026958] [<ffffffff810a0852>] warn_slowpath_common+0x82/0xc0 [ 0.026959] [<ffffffff810a099a>] warn_slowpath_null+0x1a/0x20 [ 0.026961] [<ffffffff81d8c395>] __early_ioremap+0x102/0x1bb [ 0.026962] [<ffffffff81d8c602>] early_memremap+0x13/0x15 [ 0.026964] [<ffffffff81d78361>] efi_bgrt_init+0x162/0x1ad [ 0.026966] [<ffffffff81d778ec>] efi_late_init+0x9/0xb [ 0.026968] [<ffffffff81d58ff5>] start_kernel+0x46f/0x49f [ 0.026970] [<ffffffff81d58120>] ? early_idt_handler_array+0x120/0x120 [ 0.026972] [<ffffffff81d58339>] x86_64_start_reservations+0x2a/0x2c [ 0.026974] [<ffffffff81d58485>] x86_64_start_kernel+0x14a/0x16d [ 0.026977] ---[ end trace f9b3812eb8e24c58 ]--- [ 0.026978] efi_bgrt: Ignoring BGRT: failed to map image memory early_memremap() has an upper limit on the size of mapping it can handle which is ~200KB. Clearly the BGRT image on Môshe's machine is much larger than that. There's actually no reason to restrict ourselves to using the early_* version of memremap() - the ACPI BGRT driver is invoked late enough in boot that we can use the standard version, with the benefit that the late version allows mappings of arbitrary size. Reported-by:
Môshe van der Sterre <me@moshe.nl> Tested-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1450707172-12561-1-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Ghannam, Yazen" <Yazen.Ghannam@amd.com> Signed-off-by:
-
Sai Praneeth authored
commit 50a0cb56 upstream. Starting with this commit 35eb8b81edd4 ("x86/efi: Build our own page table structures") efi regions have a separate page directory called "efi_pgd". In order to access any efi region we have to first shift %cr3 to this page table. In the bgrt code we are trying to copy bgrt_header and image, but these regions fall under "EFI_BOOT_SERVICES_DATA" and to access these regions we have to shift %cr3 to efi_pgd and not doing so will cause page fault as shown below. [ 0.251599] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.259126] Freeing SMP alternatives memory: 32K (ffffffff8230e000 - ffffffff82316000) [ 0.271803] BUG: unable to handle kernel paging request at fffffffefce35002 [ 0.279740] IP: [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.286383] PGD 300f067 PUD 0 [ 0.289879] Oops: 0000 [#1] SMP [ 0.293566] Modules linked in: [ 0.297039] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-rc1-eywa-eywa-built-in-47041+ #2 [ 0.306619] Hardware name: Intel Corporation Skylake Client platform/Skylake Y LPDDR3 RVP3, BIOS SKLSE2R1.R00.B104.B01.1511110114 11/11/2015 [ 0.320925] task: ffffffff820134c0 ti: ffffffff82000000 task.ti: ffffffff82000000 [ 0.329420] RIP: 0010:[<ffffffff821bca49>] [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.338821] RSP: 0000:ffffffff82003f18 EFLAGS: 00010246 [ 0.344852] RAX: fffffffefce35000 RBX: fffffffefce35000 RCX: fffffffefce2b000 [ 0.352952] RDX: 000000008a82b000 RSI: ffffffff8235bb80 RDI: 000000008a835000 [ 0.361050] RBP: ffffffff82003f30 R08: 000000008a865000 R09: ffffffffff202850 [ 0.369149] R10: ffffffff811ad62f R11: 0000000000000000 R12: 0000000000000000 [ 0.377248] R13: ffff88016dbaea40 R14: ffffffff822622c0 R15: ffffffff82003fb0 [ 0.385348] FS: 0000000000000000(0000) GS:ffff88016d800000(0000) knlGS:0000000000000000 [ 0.394533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.401054] CR2: fffffffefce35002 CR3: 000000000300c000 CR4: 00000000003406f0 [ 0.409153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.417252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.425350] Stack: [ 0.427638] ffffffffffffffff ffffffff82256900 ffff88016dbaea40 ffffffff82003f40 [ 0.436086] ffffffff821bbce0 ffffffff82003f88 ffffffff8219c0c2 0000000000000000 [ 0.444533] ffffffff8219ba4a ffffffff822622c0 0000000000083000 00000000ffffffff [ 0.452978] Call Trace: [ 0.455763] [<ffffffff821bbce0>] efi_late_init+0x9/0xb [ 0.461697] [<ffffffff8219c0c2>] start_kernel+0x463/0x47f [ 0.467928] [<ffffffff8219ba4a>] ? set_init_arg+0x55/0x55 [ 0.474159] [<ffffffff8219b120>] ? early_idt_handler_array+0x120/0x120 [ 0.481669] [<ffffffff8219b5ee>] x86_64_start_reservations+0x2a/0x2c [ 0.488982] [<ffffffff8219b72d>] x86_64_start_kernel+0x13d/0x14c [ 0.495897] Code: 00 41 b4 01 48 8b 78 28 e8 09 36 01 00 48 85 c0 48 89 c3 75 13 48 c7 c7 f8 ac d3 81 31 c0 e8 d7 3b fb fe e9 b5 00 00 00 45 84 e4 <44> 8b 6b 02 74 0d be 06 00 00 00 48 89 df e8 ae 34 0$ [ 0.518151] RIP [<ffffffff821bca49>] efi_bgrt_init+0x144/0x1fd [ 0.524888] RSP <ffffffff82003f18> [ 0.528851] CR2: fffffffefce35002 [ 0.532615] ---[ end trace 7b06521e6ebf2aea ]--- [ 0.537852] Kernel panic - not syncing: Attempted to kill the idle task! As said above one way to fix this bug is to shift %cr3 to efi_pgd but we are not doing that way because it leaks inner details of how we switch to EFI page tables into a new call site and it also adds duplicate code. Instead, we remove the call to efi_lookup_mapped_addr() and always perform early_mem*() instead of early_io*() because we want to remap RAM regions and not I/O regions. We also delete efi_lookup_mapped_addr() because we are no longer using it. Signed-off-by:
Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Reported-by:
Wendy Wang <wendy.wang@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Ricardo Neri <ricardo.neri@intel.com> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Signed-off-by:
-
Adam Ford authored
commit b7ace5ed upstream. Fixes commit 687c2767 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") This patch corrects an issue where the cd-gpios was improperly setup using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW. Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Matt Fleming authored
commit 67a9108e upstream. With commit e1a58320 ("x86/mm: Warn on W^X mappings") all users booting on 64-bit UEFI machines see the following warning, ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1 at arch/x86/mm/dump_pagetables.c:225 note_page+0x5dc/0x780() x86/mm: Found insecure W+X mapping at address ffff88000005f000/0xffff88000005f000 ... x86/mm: Checked W+X mappings: FAILED, 165660 W+X pages found. ... This is caused by mapping EFI regions with RWX permissions. There isn't much we can do to restrict the permissions for these regions due to the way the firmware toolchains mix code and data, but we can at least isolate these mappings so that they do not appear in the regular kernel page tables. In commit d2f7cbe7 ("x86/efi: Runtime services virtual mapping") we started using 'trampoline_pgd' to map the EFI regions because there was an existing identity mapping there which we use during the SetVirtualAddressMap() call and for broken firmware that accesses those addresses. But 'trampoline_pgd' shares some PGD entries with 'swapper_pg_dir' and does not provide the isolation we require. Notably the virtual address for __START_KERNEL_map and MODULES_START are mapped by the same PGD entry so we need to be more careful when copying changes over in efi_sync_low_kernel_mappings(). This patch doesn't go the full mile, we still want to share some PGD entries with 'swapper_pg_dir'. Having completely separate page tables brings its own issues such as synchronising new mappings after memory hotplug and module loading. Sharing also keeps memory usage down. Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
-
Matt Fleming authored
commit c9f2a9a6 upstream. This change is a prerequisite for pending patches that switch to a dedicated EFI page table, instead of using 'trampoline_pgd' which shares PGD entries with 'swapper_pg_dir'. The pending patches make it impossible to dereference the runtime service function pointer without first switching %cr3. It's true that we now have duplicated switching code in efi_call_virt() and efi_call_phys_{prolog,epilog}() but we are sacrificing code duplication for a little more clarity and the ease of writing the page table switching code in C instead of asm. Signed-off-by:
-
Matt Fleming authored
commit edc3b912 upstream. The x86 pageattr code is confused about the data that is stored in cpa->pfn, sometimes it's treated as a page frame number, sometimes it's treated as an unshifted physical address, and in one place it's treated as a pte. The result of this is that the mapping functions do not map the intended physical address. This isn't a problem in practice because most of the addresses we're mapping in the EFI code paths are already mapped in 'trampoline_pgd' and so the pageattr mapping functions don't actually do anything in this case. But when we move to using a separate page table for the EFI runtime this will be an issue. Signed-off-by:
-
Herbert Xu authored
commit 1137b5e2 upstream. An independent security researcher, Mohamed Ghannam, has reported this vulnerability to Beyond Security's SecuriTeam Secure Disclosure program. The xfrm_dump_policy_done function expects xfrm_dump_policy to have been called at least once or it will crash. This can be triggered if a dump fails because the target socket's receive buffer is full. This patch fixes it by using the cb->start mechanism to ensure that the initialisation is always done regardless of the buffer situation. Fixes: 12a169e7 ("ipsec: Put dumpers on the dump list") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Tom Herbert authored
commit fc9e50f5 upstream. The start callback allows the caller to set up a context for the dump callbacks. Presumably, the context can then be destroyed in the done callback. Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
