Merge tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig

Merge "ARM: tegra: Default configuration updates for v4.7-rc1" from Thierry Reding:

Enable the XUSB pad controller and XUSB controller drivers on the Tegra
and multi-v7 default configurations.

* tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: multi_v7: Enable Tegra XUSB controller in defconfig
  ARM: tegra: Enable XUSB controller in defconfig

Merge tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig

Merge "DaVinci defconfig updates for v4.7" from Sekhar Nori:

Some defconfig updates to support systemd
based filesystems, SPI NOR and GPIO sysfs
entries.

* tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: enable SPI and NOR as modules
  ARM: davinci_all_defconfig: support systemd
  ARM: davinci_all_defconfig: enable GPIO_SYSFS

Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the multi_v7 default configuration.

The XUSB pad controller is built-in because it is needed by PCIe, which
in turn provides the onboard ethernet used for network boot on a Jetson
TK1.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the Tegra default configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Merge tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig

Merge "Defconfig changes for omap2plus_defconfig for v4.7 merge window" from Tony Lindgren:

Mostly enable drivers used on various boards as loadable modules
where possible. Also one warning fix related to RXKAD changes
heading to v4.7. And run make save_defconfig to shrink down the
size a bit.

* tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
  ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module
  ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value
  ARM: omap2plus_defconfig: Update with make savedefconfig
  ARM: omap2plus_defconfig: Enable MDIO Bus/PHY emulation support
  ARM: omap2plus_defconfig: Enable DP83867 support
  ARM: omap2plus_defconfig: Enable GPIO_TPIC2810

Merge "NXP LPC32xx defconfig updates for v4.7" from Vladimir Zapolskiy:

This includes savedefconfig update of lpc32xx_defconfig, which removes
a number of outdated config options, plus ARM PrimeCell PL17x memory
controller driver is enabled by default now, on LPC32xx boards the
controller is commonly used to access SDRAM and NOR.

* tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx:
  ARM: LPC32xx: add PL175 memory controller driver to defconfig
  ARM: LPC32xx: defconfig update

These are available on n900.
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This is in use on omap4 boards.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Commit 648af7fc ("rxrpc: Absorb the rxkad security module") changed
the RXKAD Kconfig symbol from tristate to boolean but the commit didn't
update the omap2plus_defconfig that was enabling CONFIG_RXKAD as module.

This leads to the following warning when using the omap2plus_defconfig:

arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Merge "Renesas ARM Based SoC Pci Defconfig Updates for v4.7" from Simon Horman:

* Remove Gen2 designation from Kconfig for R-Car PCIE driver

* tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  PCI: rcar-pcie: Remove Gen2 designation from Kconfig

This patch adds a new config for MPS2 platform.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Merge tag 'keystone_config_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig

Merge "ARM: Keystone HOTPLUG and PSCI config update for 4.7" from Santosh Shilimkar

* tag 'keystone_config_for_4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: configs: keystone: Add CPU Hotplug related options

Merge "This pull request contains defconfig changes for Broadcom ARM-based SoCs"
from Florian Fainelli:

- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
  switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller

- Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
  Power Management support, switching sdhci-bcm2835 for sdhci-iproc

* tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux:
  ARM: bcm2835: Enable NFS root support.
  ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
  ARM: bcm2835: Enable CONFIG_PM.
  ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
  ARM: multi_v7_defconfig: Build in DWC2 USB support
  ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC
  ARM: multi_v7_defconfig: Add more BCM2835 support

Merge "mvebu defconfig for 4.7 (part 1)" from Gregory CLEMENT

- Use the new cryto engine(mv_cesa) in the mvebu and multi-arm
  defcongig files
- Attach mvebu_*_defconfig to the mvebu maintainers

* tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu_v5_defconfig: Switching to the new Marvell's cryptographic engine driver
  ARM: multi_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
  MAINTAINERS: attach arch/arm/configs/mvebu_*_defconfig to relevant maintainers
  ARM: mvebu_v7_defconfig: Enabling the new Marvell's cryptographic engine driver

This NAND controller device is used on UniPhier SoCs (and I know
it is also used on SoC FPGA).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'samsung-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig

Merge "Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.7" from Krzysztof Kozłowski:

1. Enable additional drivers for Trats2 board (Exynos4412).
2. Enable CPUFreq governors as modules.

* tag 'samsung-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: multi_v7_defconfig: Enable CPUFreq governors as modules
  ARM: exynos_defconfig: Enable CPUFreq governors as modules
  ARM: exynos_defconfig: Enable Trats2 audio codec, touchscreen and sensors

Enable SPI driver and SPI NOR flash support as modules.

Tested with SPI NOR flash on DA850-EVM.  Basic boot test only to confirm
NOR flash device detection.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

CONFIG_FHANDLE is required by systemd[1], which is the
default init system in more and more distributions.
So lets enable it for DaVinci platforms as well.

While at it, remove stale entry CONFIG_INOTIFY=y

[1] https://github.com/systemd/systemd/blob/master/README#L37Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

This pull request brings in changes for bcm2835_defconfig and
multi_v7_defconfig in 4.7.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.

Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

The change enables build of ARM PrimeCell PL17x driver for LPC32xx
platform, the memory controller is commonly used to interface NOR
flash drives.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

The change is a result of "make lpc32xx_defconfig; make savedefconfig"
run, a number of config options are removed:

  CONFIG_BINFMT_AOUT=y   -- not needed, legacy
  CONFIG_FPE_NWFPE=y     -- not needed, AEABI build
  CONFIG_IPV6_PRIVACY=y  -- removed build option
  CONFIG_IPV6=y          -- selected by default
  CONFIG_MII=y           -- not needed, board phys don't select library
  CONFIG_MTD_CHAR=y      -- removed build option
  CONFIG_MTD_M25P80=y    -- not needed, AT25 EEPROM driver is in use
  CONFIG_USB_PHY=y       -- selected by default
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

This enables the new driver for Marvell CESA crypto engines on all mvebu v5.
The old driver is no longer used, but it is still in the tree for fallback.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

This enables the new driver for Marvell CESA crypto engines on all ARMv7.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The arch/arm/configs/mvebu_*_defconfig currently don't belong to any
maintainer, so get_maintainer returns only information based on
commits, which is not completely accurate.

Therefore, this commit replaces a useless empty newline in MAINTAINERS
by a line attaching those defconfigs to the appropriate Marvell EBU
maintainers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

This enables the new driver for Marvell CESA crypto engines on all mvebu v7.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

CONFIG_GPIO_SYSFS provides a convenient way to
access GPIOs from userspace.

Enable it for DaVinci.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Merge tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/defconfig

Highlights:
-----------
 - Enable ST's HW Random number generator in multi_v7 defconfig
 - Enable PWM regulator support in multi_v7 defconfig
 - Enable ST's Power and Reset driver in multi_v7 defconfig
 - Enable ST's PWM in multi_v7 defconfig

* tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
  ARM: multi_v7_defconfig: Enable ST's HW Random Number Generator
  ARM: multi_v7_defconfig: Enable support for PWM Regulators
  ARM: multi_v7_defconfig: Enable ST's Power Reset driver
  ARM: multi_v7_defconfig: Enable ST's PWM driver
Signed-off-by: Olof Johansson <olof@lixom.net>

Three types of display controller-drivers where added recently. The
Analogix Displayport variant and Designware MIPI DSI used for example
on the rk3288 as well as the Innosilicon HDMI controller used on the
rk3036.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

The displayport phy controls the output of the Analogix displayport
controller on Rockchip SoCs and is therefore one component to enable
veyron devices to use their internal display.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

This shrinks the defconfig a bit and makes it easier to
generate minimal patches against it.
Signed-off-by: Tony Lindgren <tony@atomide.com>

MDIO Bus/PHY emulation with fixed speed/link PHYs will be used in
Baltos iR5221 devices to connect to ICPlus IP175D switch IC.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable DP83867 Ethernet phy for supporting networking on DRA72-EVM rev C
(SR2.0).
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable the TI TPIC2810 8-Bit LED Driver with I2C Interface. This is used
in AM335x ICEv2 Boards.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'renesas-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Renesas ARM Based SoC Defconfig Updates for v4.7

* Enable I2C demultiplexer and slave eeprom in
  shmobile and multi_v7defconfigs

* tag 'renesas-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: defconfig: enable I2C demultiplexer and slave eeprom
  ARM: multi_v7_defconfig: enable I2C demultiplexer and slave eeprom
Signed-off-by: Olof Johansson <olof@lixom.net>

Add the config options needed to get CPU hotplug functional.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>

Currently only the ondemand and performance CPUFreq policy governors are
enabled in multi_v7 defconfig. But the other governors are also useful
for some cases, enable them to allow users change the default if needed.

The options are enabled as module to keep the kernel image size minimal.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Currently only the ondemand and performance CPUFreq policy governors are
enabled in the Exynos defconfig. But the other governors are also useful
for some cases, enable them to allow users change the default if needed.

The options are enabled as module to keep the kernel image size minimal.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis
Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen
and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to
get some testing coverage and use its features.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>