- 13 Oct, 2021 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2021-10-12 * tag 'mlx5-fixes-2021-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp net/mlx5e: Switchdev representors are not vlan challenged net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path net/mlx5e: Allow only complete TXQs partition in MQPRIO channel mode net/mlx5: Fix cleanup of bridge delayed work ==================== Link: https://lore.kernel.org/r/20211012205323.20123-1-saeed@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vegard Nossum authored
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/korina.o: in function `korina_multicast_list': korina.c:(.text+0x1af): undefined reference to `crc32_le' Fixes: ef11291b ("Add support the Korina (IDT RC32434) Ethernet MAC") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Acked-by:
Florian fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211012152509.21771-1-vegard.nossum@oracle.comSigned-off-by:
-
Vegard Nossum authored
Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode': emac_main.c:(.text+0xb11): undefined reference to `crc32_le' The crc32_le() call comes through the ether_crc_le() call in arc_emac_set_rx_mode(). [v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing, but the error comes from emac_main.o, which is part of the arc_emac module, which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is different from emac_arc...] Fixes: 775dd682 ("arc_emac: implement promiscuous mode and multicast filtering") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Felix DSA driver fixes This is an assorted collection of fixes for issues seen on the NXP LS1028A switch. - PTP packet drops due to switch congestion result in catastrophic damage to the driver's state - loops are not blocked by STP if using the ocelot-8021q tagger - driver uses the wrong CPU port when two of them are defined in DT - module autoloading is broken* with both tagging protocol drivers (ocelot and ocelot-8021q) Changes in v2: - Stop printing that we aren't going to take TX timestamps if we don't have TX timestamping anyway, and we are just carrying PTP frames for a cascaded DSA switch. - Shorten the deferred xmit kthread name so that it fits the 16 character limit (TASK_COMM_LEN) ==================== Link: https://lore.kernel.org/r/20211012114044.2526146-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
The NXP LS1028A switch has two Ethernet ports towards the CPU, but only one of them is capable of acting as an NPI port at a time (inject and extract packets using DSA tags). However, using the alternative ocelot-8021q tagging protocol, it should be possible to use both CPU ports symmetrically, but for that we need to mark both ports in the device tree as DSA masters. In the process of doing that, it can be seen that traffic to/from the network stack gets broken, and this is because the Felix driver iterates through all DSA CPU ports and configures them as NPI ports. But since there can only be a single NPI port, we effectively end up in a situation where DSA thinks the default CPU port is the first one, but the hardware port configured to be an NPI is the last one. I would like to treat this as a bug, because if the updated device trees are going to start circulating, it would be really good for existing kernels to support them, too. Fixes: adb3dccf ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Vladimir Oltean authored
When setting up a bridge with stp_state 1, topology changes are not detected and loops are not blocked. This is because the standard way of transmitting a packet, based on VLAN IDs redirected by VCAP IS2 to the right egress port, does not override the port STP state (in the case of Ocelot switches, that's really the PGID_SRC masks). To force a packet to be injected into a port that's BLOCKING, we must send it as a control packet, which means in the case of this tagger to send it using the manual register injection method. We already do this for PTP frames, extend the logic to apply to any link-local MAC DA. Fixes: 7c83a7c5 ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by:
-
Vladimir Oltean authored
At present, when a PTP packet which requires TX timestamping gets dropped under congestion by the switch, things go downhill very fast. The driver keeps a clone of that skb in a queue of packets awaiting TX timestamp interrupts, but interrupts will never be raised for the dropped packets. Moreover, matching timestamped packets to timestamps is done by a 2-bit timestamp ID, and this can wrap around and we can match on the wrong skb. Since with the default NPI-based tagging protocol, we get no notification about packet drops, the best we can do is eventually recover from the drop of a PTP frame: its skb will be dead memory until another skb which was assigned the same timestamp ID happens to find it. However, with the ocelot-8021q tagger which injects packets using the manual register interface, it appears that we can check for more information, such as: - whether the input queue has reached the high watermark or not - whether the injection group's FIFO can accept additional data or not so we know that a PTP frame is likely to get dropped before actually sending it, and drop it ourselves (because DSA uses NETIF_F_LLTX, so it can't return NETDEV_TX_BUSY to ask the qdisc to requeue the packet). But when we do that, we can also remove the skb from the timestamping queue, because there surely won't be any timestamp that matches it. Fixes: 0a6f17c6 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by:
-
Vladimir Oltean authored
Michael reported that when using the "ocelot-8021q" tagging protocol, the switch driver module must be manually loaded before the tagging protocol can be loaded/is available. This appears to be the same problem described here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ where due to the fact that DSA tagging protocols make use of symbols exported by the switch drivers, circular dependencies appear and this breaks module autoloading. The ocelot_8021q driver needs the ocelot_can_inject() and ocelot_port_inject_frame() functions from the switch library. Previously the wrong approach was taken to solve that dependency: shims were provided for the case where the ocelot switch library was compiled out, but that turns out to be insufficient, because the dependency when the switch lib _is_ compiled is problematic too. We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as static inline functions, because these access I/O functions like __ocelot_write_ix() which is called by ocelot_write_rix(). Making those static inline basically means exposing the whole guts of the ocelot switch library, not ideal... We already have one tagging protocol driver which calls into the switch driver during xmit but not using any exported symbol: sja1105_defer_xmit. We can do the same thing here: create a kthread worker and one work item per skb, and let the switch driver itself do the register accesses to send the skb, and then consume it. Fixes: 0a6f17c6 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Reported-by:
Michael Walle <michael@walle.cc> Signed-off-by:
-
Vladimir Oltean authored
As explained here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocol drivers cannot depend on symbols exported by switch drivers, because this creates a circular dependency that breaks module autoloading. The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function exported by the common ocelot switch lib. This function looks at OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the DSA tag, for PTP timestamping (the command: one-step/two-step, and the TX timestamp identifier). None of that requires deep insight into the driver, it is quite stateless, as it only depends upon the skb->cb. So let's make it a static inline function and put it in include/linux/dsa/ocelot.h, a file that despite its name is used by the ocelot switch driver for populating the injection header too - since commit 40d3f295 ("net: mscc: ocelot: use common tag parsing code with DSA"). With that function declared as static inline, its body is expanded inside each call site, so the dependency is broken and the DSA tagger can be built without the switch library, upon which the felix driver depends. Fixes: 39e5308b ("net: mscc: ocelot: support PTP Sync one-step timestamping") Signed-off-by:
-
Vladimir Oltean authored
The sad reality is that when a PTP frame with a TX timestamping request is transmitted, it isn't guaranteed that it will make it all the way to the wire (due to congestion inside the switch), and that a timestamp will be taken by the hardware and placed in the timestamp FIFO where an IRQ will be raised for it. The implication is that if enough PTP frames are silently dropped by the hardware such that the timestamp ID has rolled over, it is possible to match a timestamp to an old skb. Furthermore, nobody will match on the real skb corresponding to this timestamp, since we stupidly matched on a previous one that was stale in the queue, and stopped there. So PTP timestamping will be broken and there will be no way to recover. It looks like the hardware parses the sequenceID from the PTP header, and also provides that metadata for each timestamp. The driver currently ignores this, but it shouldn't. As an extra resiliency measure, do the following: - check whether the PTP sequenceID also matches between the skb and the timestamp, treat the skb as stale otherwise and free it - if we see a stale skb, don't stop there and try to match an skb one more time, chances are there's one more skb in the queue with the same timestamp ID, otherwise we wouldn't have ever found the stale one (it is by timestamp ID that we matched it). While this does not prevent PTP packet drops, it at least prevents the catastrophic consequences of incorrect timestamp matching. Since we already call ptp_classify_raw in the TX path, save the result in the skb->cb of the clone, and just use that result in the interrupt code path. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Vladimir Oltean authored
It appears that Ocelot switches cannot timestamp non-PTP frames, I tested this using the isochron program at: https://github.com/vladimiroltean/tsn-scripts with the result that the driver increments the ocelot_port->ts_id counter as expected, puts it in the REW_OP, but the hardware seems to not timestamp these packets at all, since no IRQ is emitted. Therefore check whether we are sending PTP frames, and refuse to populate REW_OP otherwise. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Vladimir Oltean authored
When skb_match is NULL, it means we received a PTP IRQ for a timestamp ID that the kernel has no idea about, since there is no skb in the timestamping queue with that timestamp ID. This is a grave error and not something to just "continue" over. So print a big warning in case this happens. Also, move the check above ocelot_get_hwtimestamp(), there is no point in reading the full 64-bit current PTP time if we're not going to do anything with it anyway for this skb. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Vladimir Oltean authored
PTP packets with 2-step TX timestamp requests are matched to packets based on the egress port number and a 6-bit timestamp identifier. All PTP timestamps are held in a common FIFO that is 128 entry deep. This patch ensures that back-to-back timestamping requests cannot exceed the hardware FIFO capacity. If that happens, simply send the packets without requesting a TX timestamp to be taken (in the case of felix, since the DSA API has a void return code in ds->ops->port_txtstamp) or drop them (in the case of ocelot). I've moved the ts_id_lock from a per-port basis to a per-switch basis, because we need separate accounting for both numbers of PTP frames in flight. And since we need locking to inc/dec the per-switch counter, that also offers protection for the per-port counter and hence there is no reason to have a per-port counter anymore. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Vladimir Oltean authored
At present, there is a problem when user space bombards a port with PTP event frames which have TX timestamping requests (or when a tc-taprio offload is installed on a port, which delays the TX timestamps by a significant amount of time). The driver will happily roll over the 2-bit timestamp ID and this will cause incorrect matches between an skb and the TX timestamp collected from the FIFO. The Ocelot switches have a 6-bit PTP timestamp identifier, and the value 63 is reserved, so that leaves identifiers 0-62 to be used. The timestamp identifiers are selected by the REW_OP packet field, and are actually shared between CPU-injected frames and frames which match a VCAP IS2 rule that modifies the REW_OP. The hardware supports partitioning between the two uses of the REW_OP field through the PTP_ID_LOW and PTP_ID_HIGH registers, and by default reserves the PTP IDs 0-3 for CPU-injected traffic and the rest for VCAP IS2. The driver does not use VCAP IS2 to set REW_OP for 2-step timestamping, and it also writes 0xffffffff to both PTP_ID_HIGH and PTP_ID_LOW in ocelot_init_timestamp() which makes all timestamp identifiers available to CPU injection. Therefore, we can make use of all 63 timestamp identifiers, which should allow more timestampable packets to be in flight on each port. This is only part of the solution, more issues will be addressed in future changes. Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support") Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Fix circular dependency between sja1105 and tag_sja1105 As discussed here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocols cannot use symbols exported by switch drivers. Eliminate the two instances of that from tag_sja1105, and that allows us to have a working setup with modules again. ==================== Re-applying to net, this was mistakenly applied to net-next, see first Link. Link: https://lore.kernel.org/r/20211012114044.2526146-1-vladimir.oltean@nxp.com/ Link: https://lore.kernel.org/r/20210922143726.2431036-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
It's nice to be able to test a tagging protocol with dsa_loop, but not at the cost of losing the ability of building the tagging protocol and switch driver as modules, because as things stand, there is a circular dependency between the two. Tagging protocol drivers cannot depend on switch drivers, that is a hard fact. The reasoning behind the blamed patch was that accessing dp->priv should first make sure that the structure behind that pointer is what we really think it is. Currently the "sja1105" and "sja1110" tagging protocols only operate with the sja1105 switch driver, just like any other tagging protocol and switch combination. The only way to mix and match them is by modifying the code, and this applies to dsa_loop as well (by default that uses DSA_TAG_PROTO_NONE). So while in principle there is an issue, in practice there isn't one. Until we extend dsa_loop to allow user space configuration, treat the problem as a non-issue and just say that DSA ports found by tag_sja1105 are always sja1105 ports, which is in fact true. But keep the dsa_port_is_sja1105 function so that it's easy to patch it during testing, and rely on dead code elimination. Fixes: 994d2cbb ("net: dsa: tag_sja1105: be dsa_loop-safe") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/Signed-off-by:
-
Vladimir Oltean authored
The problem is that DSA tagging protocols really must not depend on the switch driver, because this creates a circular dependency at insmod time, and the switch driver will effectively not load when the tagging protocol driver is missing. The code was structured in the way it was for a reason, though. The DSA driver-facing API for PTP timestamping relies on the assumption that two-step TX timestamps are provided by the hardware in an out-of-band manner, typically by raising an interrupt and making that timestamp available inside some sort of FIFO which is to be accessed over SPI/MDIO/etc. So the API puts .port_txtstamp into dsa_switch_ops, because it is expected that the switch driver needs to save some state (like put the skb into a queue until its TX timestamp arrives). On SJA1110, TX timestamps are provided by the switch as Ethernet packets, so this makes them be received and processed by the tagging protocol driver. This in itself is great, because the timestamps are full 64-bit and do not require reconstruction, and since Ethernet is the fastest I/O method available to/from the switch, PTP timestamps arrive very quickly, no matter how bottlenecked the SPI connection is, because SPI interaction is not needed at all. DSA's code structure and strict isolation between the tagging protocol driver and the switch driver break the natural code organization. When the tagging protocol driver receives a packet which is classified as a metadata packet containing timestamps, it passes those timestamps one by one to the switch driver, which then proceeds to compare them based on the recorded timestamp ID that was generated in .port_txtstamp. The communication between the tagging protocol and the switch driver is done through a method exported by the switch driver, sja1110_process_meta_tstamp. To satisfy build requirements, we force a dependency to build the tagging protocol driver as a module when the switch driver is a module. However, as explained in the first paragraph, that causes the circular dependency. To solve this, move the skb queue from struct sja1105_private :: struct sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data. The latter is a data structure for which hacks have already been put into place to be able to create persistent storage per switch that is accessible from the tagging protocol driver (see sja1105_setup_ports). With the skb queue directly accessible from the tagging protocol driver, we can now move sja1110_process_meta_tstamp into the tagging driver itself, and avoid exporting a symbol. Fixes: 566b18c8 ("net: dsa: sja1105: implement TX timestamping for SJA1110") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/Signed-off-by:
-
- 12 Oct, 2021 17 commits
-
-
Alvin Šipraga authored
Flip the sign of a return value check, thereby suppressing the following spurious error: port 2 failed to notify DSA_NOTIFIER_BRIDGE_LEAVE: -EOPNOTSUPP ... which is emitted when removing an unoffloaded DSA switch port from a bridge. Fixes: d371b7c9 ("net: dsa: Unset vlan_filtering when ports leave the bridge") Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
-
Baowen Zheng authored
In commit 74fc4f82 ("net: Fix offloading indirect devices dependency on qdisc order creation"), it adds a process to trigger the callback to setup the bo callback when the driver regists a callback. In our current implement, we are not ready to run the callback when nfp call the function flow_indr_dev_register, then there will be error message as: kernel: Oops: 0000 [#1] SMP PTI kernel: CPU: 0 PID: 14119 Comm: kworker/0:0 Tainted: G kernel: Workqueue: events work_for_cpu_fn kernel: RIP: 0010:nfp_flower_indr_setup_tc_cb+0x258/0x410 kernel: RSP: 0018:ffffbc1e02c57bf8 EFLAGS: 00010286 kernel: RAX: 0000000000000000 RBX: ffff9c761fabc000 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: fffffffffffffff0 RDI: ffffffffc0be9ef1 kernel: RBP: ffffbc1e02c57c58 R08: ffffffffc08f33aa R09: ffff9c6db7478800 kernel: R10: 0000009c003f6e00 R11: ffffbc1e02800000 R12: ffffbc1e000d9000 kernel: R13: ffffbc1e000db428 R14: ffff9c6db7478800 R15: ffff9c761e884e80 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: fffffffffffffff0 CR3: 00000009e260a004 CR4: 00000000007706f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: PKRU: 55555554 kernel: Call Trace: kernel: ? flow_indr_dev_register+0xab/0x210 kernel: ? __cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc_trace+0x44/0x4b0 kernel: ? nfp_flower_setup_tc+0x1d0/0x1d0 [nfp] kernel: flow_indr_dev_register+0x158/0x210 kernel: ? tcf_block_unbind+0xe0/0xe0 kernel: nfp_flower_init+0x40b/0x650 [nfp] kernel: nfp_net_pci_probe+0x25f/0x960 [nfp] kernel: ? nfp_rtsym_read_le+0x76/0x130 [nfp] kernel: nfp_pci_probe+0x6a9/0x820 [nfp] kernel: local_pci_probe+0x45/0x80 So we need to call flow_indr_dev_register in app start process instead of init stage. Fixes: 74fc4f82 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20211012124850.13025-1-louis.peens@corigine.comSigned-off-by:
-
Maxim Mikityanskiy authored
Commit 846d6da1 ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") makes mlx5e_build_nic_params assign a non-zero initial value to priv->num_tc_x_num_ch, so that mlx5e_select_queue doesn't fail with division by 0 if called before the first activation of channels. However, the initialization flow of representors doesn't call mlx5e_build_nic_params, so this bug can still happen with representors. This commit fixes the bug by adding the missing assignment to mlx5e_build_rep_params. Fixes: 846d6da1 ("net/mlx5e: Fix division by 0 in mlx5e_select_queue") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Aya Levin authored
Due to current HW arch limitations, RX-FCS (scattering FCS frame field to software) and RX-port-timestamp (improved timestamp accuracy on the receive side) can't work together. RX-port-timestamp is not controlled by the user and it is enabled by default when supported by the HW/FW. This patch sets RX-port-timestamp opposite to RX-FCS configuration. Fixes: 102722fc ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Saeed Mahameed authored
Before this patch, mlx5 representors advertised the NETIF_F_VLAN_CHALLENGED bit, this could lead to missing features when using reps with vxlan/bridge and maybe other virtual interfaces, when such interfaces inherit this bit and block vlan usage in their topology. Example: $ip link add dev bridge type bridge # add representor interface to the bridge $ip link set dev pf0hpf master $ip link add link bridge name vlan10 type vlan id 10 protocol 802.1q Error: 8021q: VLANs not supported on device. Reps are perfectly capable of handling vlan traffic, although they don't implement vlan_{add,kill}_vid ndos, hence, remove NETIF_F_VLAN_CHALLENGED advertisement. Fixes: cb67b832 ("net/mlx5e: Introduce SRIOV VF representors") Reported-by:Roopa Prabhu <roopa@nvidia.com> Signed-off-by:
Roi Dayan <roid@nvidia.com>
-
Valentine Fatiev authored
Prior to this patch in case mlx5_core_destroy_cq() failed it returns without completing all destroy operations and that leads to memory leak. Instead, complete the destroy flow before return error. Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq() to be symmetrical with mlx5_core_create_cq(). kmemleak complains on: unreferenced object 0xc000000038625100 (size 64): comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s) hex dump (first 32 bytes): 60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4..... 02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}..... backtrace: [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core] [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core] [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core] [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core] [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core] [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core] [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core] [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230 [mlx5_core] [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300 [mlx5_core] [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core] [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core] [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0 [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0 [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0 [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120 [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0 Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:Valentine Fatiev <valentinef@nvidia.com> Reviewed-by:
-
Tariq Toukan authored
Do not allow configurations of MQPRIO channel mode that do not fully define and utilize the channels txqs. Fixes: ec60c458 ("net/mlx5e: Support MQPRIO channel mode") Signed-off-by:
-
Shay Drory authored
Currently, bridge cleanup is calling to cancel_delayed_work(). When this function is finished, there is a chance that the delayed work is still running. Also, the delayed work is queueing itself. As a result, we might execute the delayed work after the bridge cleanup have finished and hit a null-ptr oops[1]. Fix it by using cancel_delayed_work_sync(), which is waiting until the work is done and will cancel the queue work. [1] [ 8202.143043 ] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 8202.144438 ] #PF: supervisor write access in kernel mode [ 8202.145476 ] #PF: error_code(0x0002) - not-present page [ 8202.146520 ] PGD 0 P4D 0 [ 8202.147126 ] Oops: 0002 [#1] SMP NOPTI [ 8202.147899 ] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.14.0-rc6_for_upstream_min_debug_2021_08_25_16_06 #1 [ 8202.149741 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 8202.151908 ] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 8202.156234 ] RSP: 0018:ffff88846f885ea0 EFLAGS: 00010046 [ 8202.157289 ] RAX: 0000000000000000 RBX: ffff88846f880000 RCX: 0000000000000000 [ 8202.158731 ] RDX: 0000000000000001 RSI: ffff8881004000c8 RDI: 0000000000000000 [ 8202.160177 ] RBP: ffff8881fe684978 R08: ffff888100140000 R09: ffffffff824455b8 [ 8202.161569 ] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 8202.163004 ] R13: 0000000000000012 R14: 0000000000000200 R15: ffff88812992d000 [ 8202.164018 ] FS: 0000000000000000(0000) GS:ffff88846f880000(0000) knlGS:0000000000000000 [ 8202.164960 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8202.165634 ] CR2: 0000000000000000 CR3: 0000000108cac004 CR4: 0000000000370ea0 [ 8202.166450 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8202.167807 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8202.168852 ] Call Trace: [ 8202.169421 ] <IRQ> [ 8202.169792 ] __queue_work+0xf2/0x3d0 [ 8202.170481 ] ? queue_work_node+0x40/0x40 [ 8202.171270 ] call_timer_fn+0x2b/0x100 [ 8202.171932 ] __run_timers.part.0+0x152/0x220 [ 8202.172717 ] ? __hrtimer_run_queues+0x171/0x290 [ 8202.173526 ] ? kvm_clock_get_cycles+0xd/0x10 [ 8202.174232 ] ? ktime_get+0x35/0x90 [ 8202.174943 ] run_timer_softirq+0x26/0x50 [ 8202.175745 ] __do_softirq+0xc7/0x271 [ 8202.176373 ] irq_exit_rcu+0x93/0xb0 [ 8202.176983 ] sysvec_apic_timer_interrupt+0x72/0x90 [ 8202.177755 ] </IRQ> [ 8202.178245 ] asm_sysvec_apic_timer_interrupt+0x12/0x20 Fixes: c636a0f0 ("net/mlx5: Bridge, dynamic entry ageing") Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
-
Jacob Keller authored
Commit 4dd0d5c3 ("ice: add lock around Tx timestamp tracker flush") added a lock around the Tx timestamp tracker flow which is used to cleanup any left over SKBs and prepare for device removal. This lock is problematic because it is being held around a call to ice_clear_phy_tstamp. The clear function takes a mutex to send a PHY write command to firmware. This could lead to a deadlock if the mutex actually sleeps, and causes the following warning on a kernel with preemption debugging enabled: [ 715.419426] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:573 [ 715.427900] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 3100, name: rmmod [ 715.435652] INFO: lockdep is turned off. [ 715.439591] Preemption disabled at: [ 715.439594] [<0000000000000000>] 0x0 [ 715.446678] CPU: 52 PID: 3100 Comm: rmmod Tainted: G W OE 5.15.0-rc4+ #42 bdd7ec3018e725f159ca0d372ce8c2c0e784891c [ 715.458058] Hardware name: Intel Corporation S2600STQ/S2600STQ, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ 715.468483] Call Trace: [ 715.470940] dump_stack_lvl+0x6a/0x9a [ 715.474613] ___might_sleep.cold+0x224/0x26a [ 715.478895] __mutex_lock+0xb3/0x1440 [ 715.482569] ? stack_depot_save+0x378/0x500 [ 715.486763] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.494979] ? kfree+0xc1/0x520 [ 715.498128] ? mutex_lock_io_nested+0x12a0/0x12a0 [ 715.502837] ? kasan_set_free_info+0x20/0x30 [ 715.507110] ? __kasan_slab_free+0x10b/0x140 [ 715.511385] ? slab_free_freelist_hook+0xc7/0x220 [ 715.516092] ? kfree+0xc1/0x520 [ 715.519235] ? ice_deinit_lag+0x16c/0x220 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.527359] ? ice_remove+0x1cf/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.535133] ? pci_device_remove+0xab/0x1d0 [ 715.539318] ? __device_release_driver+0x35b/0x690 [ 715.544110] ? driver_detach+0x214/0x2f0 [ 715.548035] ? bus_remove_driver+0x11d/0x2f0 [ 715.552309] ? pci_unregister_driver+0x26/0x250 [ 715.556840] ? ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.564799] ? __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.570554] ? do_syscall_64+0x3b/0x90 [ 715.574303] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.579529] ? start_flush_work+0x542/0x8f0 [ 715.583719] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.591923] ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.599960] ? wait_for_completion_io+0x250/0x250 [ 715.604662] ? lock_acquire+0x196/0x200 [ 715.608504] ? do_raw_spin_trylock+0xa5/0x160 [ 715.612864] ice_sbq_rw_reg+0x1e6/0x2f0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.620813] ? ice_reset+0x130/0x130 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.628497] ? __debug_check_no_obj_freed+0x1e8/0x3c0 [ 715.633550] ? trace_hardirqs_on+0x1c/0x130 [ 715.637748] ice_write_phy_reg_e810+0x70/0xf0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.646220] ? do_raw_spin_trylock+0xa5/0x160 [ 715.650581] ? ice_ptp_release+0x910/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.658797] ? ice_ptp_release+0x255/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.667013] ice_clear_phy_tstamp+0x2c/0x110 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.675403] ice_ptp_release+0x408/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.683440] ice_remove+0x560/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.691037] ? _raw_spin_unlock_irqrestore+0x46/0x73 [ 715.696005] pci_device_remove+0xab/0x1d0 [ 715.700018] __device_release_driver+0x35b/0x690 [ 715.704637] driver_detach+0x214/0x2f0 [ 715.708389] bus_remove_driver+0x11d/0x2f0 [ 715.712489] pci_unregister_driver+0x26/0x250 [ 715.716857] ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.724637] __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.730210] ? free_module+0x6d0/0x6d0 [ 715.733963] ? task_work_run+0xe1/0x170 [ 715.737803] ? exit_to_user_mode_loop+0x17f/0x1d0 [ 715.742509] ? rcu_read_lock_sched_held+0x12/0x80 [ 715.747215] ? trace_hardirqs_on+0x1c/0x130 [ 715.751401] do_syscall_64+0x3b/0x90 [ 715.754981] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.760033] RIP: 0033:0x7f4dfe59000b [ 715.763612] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 1e 0c 00 f7 d8 64 89 01 48 [ 715.782357] RSP: 002b:00007ffe8c891708 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 715.789923] RAX: ffffffffffffffda RBX: 00005558a20468b0 RCX: 00007f4dfe59000b [ 715.797054] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005558a2046918 [ 715.804189] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 715.811319] R10: 00007f4dfe603ac0 R11: 0000000000000206 R12: 00007ffe8c891940 [ 715.818455] R13: 00007ffe8c8920a3 R14: 00005558a20462a0 R15: 00005558a20468b0 Notice that this is the only case where we use the lock in this way. In the cleanup kthread and work kthread the lock is only taken around the bit accesses. This was done intentionally to avoid this kind of issue. The way the lock is used, we only protect ordering of bit sets vs bit clears. The Tx writers in the hot path don't need to be protected against the entire kthread loop. The Tx queues threads only need to ensure that they do not re-use an index that is currently in use. The cleanup loop does not need to block all new set bits, since it will re-queue itself if new timestamps are present. Fix the tracker flow so that it uses the same flow as the standard cleanup thread. In addition, ensure the in_use bitmap actually gets cleared properly. This fixes the warning and also avoids the potential deadlock that might have occurred otherwise. Fixes: 4dd0d5c3 ("ice: add lock around Tx timestamp tracker flush") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Justin Iurman says: ==================== Correct the IOAM behavior for undefined trace type bits (@Jakub @David: there will be a conflict for #2 when merging net->net-next, due to commit [1]. The conflict is only 5-10 lines for #2 (#1 should be fine) inside the file tools/testing/selftests/net/ioam6.sh, so quite short though possibly ugly. Sorry for that, I didn't expect to post this one... Had I known, I'd have made the opposite.) Modify both the input and output behaviors regarding the trace type when one of the undefined bits is set. The goal is to keep the interoperability when new fields (aka new bits inside the range 12-21) will be defined. The draft [2] says the following: --------------------------------------------------------------- "Bit 12-21 Undefined. These values are available for future assignment in the IOAM Trace-Type Registry (Section 8.2). Every future node data field corresponding to one of these bits MUST be 4-octets long. An IOAM encapsulating node MUST set the value of each undefined bit to 0. If an IOAM transit node receives a packet with one or more of these bits set to 1, it MUST either: 1. Add corresponding node data filled with the reserved value 0xFFFFFFFF, after the node data fields for the IOAM-Trace-Type bits defined above, such that the total node data added by this node in units of 4-octets is equal to NodeLen, or 2. Not add any node data fields to the packet, even for the IOAM-Trace-Type bits defined above." --------------------------------------------------------------- The output behavior has been modified to respect the fact that "an IOAM encap node MUST set the value of each undefined bit to 0" (i.e., undefined bits can't be set anymore). As for the input behavior, current implementation is based on the second choice (i.e., "not add any data fields to the packet [...]"). With this solution, any interoperability is lost (i.e., if a new bit is defined, then an "old" kernel implementation wouldn't fill IOAM data when such new bit is set inside the trace type). The input behavior is therefore relaxed and these undefined bits are now allowed to be set. It is only possible thanks to the sentence "every future node data field corresponding to one of these bits MUST be 4-octets long". Indeed, the default empty value (the one for 4-octet fields) is inserted whenever an undefined bit is set. [1] cfbe9b00 [2] https://datatracker.ietf.org/doc/html/draft-ietf-ippm-ioam-data#section-5.4.1 ==================== Signed-off-by: -
Justin Iurman authored
The output behavior for undefined bits is now directly tested inside the bash script. Trying to set an undefined bit should be refused. The input behavior for undefined bits has been removed due to the fact that we would need another sender allowed to set undefined bits. Signed-off-by:
Justin Iurman <justin.iurman@uliege.be> Signed-off-by:
-
Justin Iurman authored
The check for undefined bits in the trace type is moved from the input side to the output side, while the input side is relaxed and now inserts default empty values when an undefined bit is set. Signed-off-by:
-
Arun Ramadoss authored
When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work Fixes: 469b390e ("net: dsa: microchip: use delayed_work instead of timer + work") Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by:
-
Vegard Nossum authored
Fix the following build/link errors by adding a dependency on CRYPTO, CRYPTO_HASH, CRYPTO_SHA256 and CRC32: ld: drivers/net/usb/r8152.o: in function `rtl8152_fw_verify_checksum': r8152.c:(.text+0x2b2a): undefined reference to `crypto_alloc_shash' ld: r8152.c:(.text+0x2bed): undefined reference to `crypto_shash_digest' ld: r8152.c:(.text+0x2c50): undefined reference to `crypto_destroy_tfm' ld: drivers/net/usb/r8152.o: in function `_rtl8152_set_rx_mode': r8152.c:(.text+0xdcb0): undefined reference to `crc32_le' Fixes: 9370f2d0 ("r8152: support request_firmware for RTL8153") Fixes: ac718b69 ("net/usb: new driver for RTL8152") Signed-off-by:
-
Maarten Zanders authored
mv88e6xxx_port_ppu_updates() interpretes data in the PORT_STS register incorrectly for internal ports (ie no PPU). In these cases, the PHY_DETECT bit indicates link status. This results in forcing the MAC state whenever the PHY link goes down which is not intended. As a side effect, LED's configured to show link status stay lit even though the physical link is down. Add a check in mac_link_down and mac_link_up to see if it concerns an external port and only then, look at PPU status. Fixes: 5d5b231d (net: dsa: mv88e6xxx: use PHY_DETECT in mac_link_up/mac_link_down) Reported-by:
Maarten Zanders <m.zanders@televic.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
Maarten Zanders <maarten.zanders@mind.be> Signed-off-by:
-
Wan Jiabing authored
Fix the following coccicheck warning: drivers/net/ethernet/mscc/ocelot.c:474:duplicated argument to & or | drivers/net/ethernet/mscc/ocelot.c:476:duplicated argument to & or | drivers/net/ethernet/mscc/ocelot_net.c:1627:duplicated argument to & or | These DEV_CLOCK_CFG_MAC_TX_RST are duplicate here. Here should be DEV_CLOCK_CFG_MAC_RX_RST. Fixes: e6e12df6 ("net: mscc: ocelot: convert to phylink") Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Reviewed-by:
-
Stephen Boyd authored
Then name of this protocol changed in commit 94531cfc ("af_unix: Add unix_stream_proto for sockmap") because that commit added stream support to the af_unix protocol. Renaming the existing protocol makes a ChromeOS protocol test[1] fail now that the name has changed in /proc/net/protocols from "UNIX" to "UNIX-DGRAM". Let's put the name back to how it was while keeping the stream protocol as "UNIX-STREAM" so that the procfs interface doesn't change. This fixes the test and maintains backwards compatibility in proc. Cc: Jiang Wang <jiang.wang@bytedance.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Cong Wang <cong.wang@bytedance.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Dmitry Osipenko <digetx@gmail.com> Link: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/tast-tests/src/chromiumos/tast/local/bundles/cros/network/supported_protocols.go;l=50;drc=e8b1c3f94cb40a054f4aa1ef1aff61e75dc38f18 [1] Fixes: 94531cfc ("af_unix: Add unix_stream_proto for sockmap") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
- 09 Oct, 2021 6 commits
-
-
Xuan Zhuo authored
commit 12628565 ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net") accidentally reverted the effect of commit 1a802423 ("virtio-net: fix for skb_over_panic inside big mode") on drivers/net/virtio_net.c As a result, users of crosvm (which is using large packet mode) are experiencing crashes with 5.14-rc1 and above that do not occur with 5.13. Crash trace: [ 61.346677] skbuff: skb_over_panic: text:ffffffff881ae2c7 len:3762 put:3762 head:ffff8a5ec8c22000 data:ffff8a5ec8c22010 tail:0xec2 end:0xec0 dev:<NULL> [ 61.369192] kernel BUG at net/core/skbuff.c:111! [ 61.372840] invalid opcode: 0000 [#1] SMP PTI [ 61.374892] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.14.0-rc1 linux-v5.14-rc1-for-mesa-ci.tar.bz2 #1 [ 61.376450] Hardware name: ChromiumOS crosvm, BIOS 0 .. [ 61.393635] Call Trace: [ 61.394127] <IRQ> [ 61.394488] skb_put.cold+0x10/0x10 [ 61.395095] page_to_skb+0xf7/0x410 [ 61.395689] receive_buf+0x81/0x1660 [ 61.396228] ? netif_receive_skb_list_internal+0x1ad/0x2b0 [ 61.397180] ? napi_gro_flush+0x97/0xe0 [ 61.397896] ? detach_buf_split+0x67/0x120 [ 61.398573] virtnet_poll+0x2cf/0x420 [ 61.399197] __napi_poll+0x25/0x150 [ 61.399764] net_rx_action+0x22f/0x280 [ 61.400394] __do_softirq+0xba/0x257 [ 61.401012] irq_exit_rcu+0x8e/0xb0 [ 61.401618] common_interrupt+0x7b/0xa0 [ 61.402270] </IRQ> See https://lore.kernel.org/r/5edaa2b7c2fe4abd0347b8454b2ac032b6694e2c.camel%40collabora.com for the report. Apply the original 1a802423 ("virtio-net: fix for skb_over_panic inside big mode") again, the original logic still holds: In virtio-net's large packet mode, there is a hole in the space behind buf. hdr_padded_len - hdr_len We must take this into account when calculating tailroom. Cc: Greg KH <gregkh@linuxfoundation.org> Fixes: fb32856b ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Fixes: 12628565 ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net") Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reported-by:
Corentin Noël <corentin.noel@collabora.com> Tested-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Florian Fainelli authored
In case a PHY device was probed thus in the PHY_READY state, but not configured and with no network device attached yet, we should not be trying to shut it down because it has been brought back into reset by phy_device_reset() towards the end of phy_probe() and anyway we have not configured the PHY yet. Fixes: e2f016cf ("net: phy: add a shutdown procedure") Signed-off-by:
-
chongjiapeng authored
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'rc'. Eliminate the follow smatch warning: drivers/net/ethernet/qlogic/qed/qed_main.c:1298 qed_slowpath_start() warn: missing error code 'rc'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Fixes: d51e4af5 ("qed: aRFS infrastructure support") Signed-off-by:
chongjiapeng <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Vladimir Oltean authored
It was a documented fact that ds->ops->change_tag_protocol() offered rtnetlink mutex protection to the switch driver, since there was an ASSERT_RTNL right before the call in dsa_switch_change_tag_proto() (initiated from sysfs). The blamed commit introduced another call path for ds->ops->change_tag_protocol() which does not hold the rtnl_mutex. This is: dsa_tree_setup -> dsa_tree_setup_switches -> dsa_switch_setup -> dsa_switch_setup_tag_protocol -> ds->ops->change_tag_protocol() -> dsa_port_setup -> dsa_slave_create -> register_netdevice(slave_dev) -> dsa_tree_setup_master -> dsa_master_setup -> dev->dsa_ptr = cpu_dp The reason why the rtnl_mutex is held in the sysfs call path is to ensure that, once the master and all the DSA interfaces are down (which is required so that no packets flow), they remain down during the tagging protocol change. The above calling order illustrates the fact that it should not be risky to change the initial tagging protocol to the one specified in the device tree at the given time: - packets cannot enter the dsa_switch_rcv() packet type handler since netdev_uses_dsa() for the master will not yet return true, since dev->dsa_ptr has not yet been populated - packets cannot enter the dsa_slave_xmit() function because no DSA interface has yet been registered So from the DSA core's perspective, holding the rtnl_mutex is indeed not necessary. Yet, drivers may need to do things which need rtnl_mutex protection. For example: felix_set_tag_protocol -> felix_setup_tag_8021q -> dsa_tag_8021q_register -> dsa_tag_8021q_setup -> dsa_tag_8021q_port_setup -> vlan_vid_add -> ASSERT_RTNL These drivers do not really have a choice to take the rtnl_mutex themselves, since in the sysfs case, the rtnl_mutex is already held. Fixes: deff7107 ("net: dsa: Allow default tag protocol to be overridden from DT") Signed-off-by: -
Zheyu Ma authored
The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250 Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
-
Shannon Nelson authored
Bridging, and possibly other upper stack gizmos, adds the lower device's netdev->dev_addr to its own uc list, and then requests it be deleted when the upper bridge device is removed. This delete request also happens with the bridging vlan_filtering is enabled and then disabled. Bonding has a similar behavior with the uc list, but since it also uses set_mac to manage netdev->dev_addr, it doesn't have the same the failure case. Because we store our netdev->dev_addr in our uc list, we need to ignore the delete request from dev_uc_sync so as to not lose the address and all hope of communicating. Note that ndo_set_mac_address is expressly changing netdev->dev_addr, so no limitation is set there. Fixes: 2a654540 ("ionic: Add Rx filter and rx_mode ndo support") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
