- 16 Aug, 2021 17 commits
-
-
Amit Engel authored
According to the NVMe specification, if the host sends a Connect command specifying a queue id which has already been created, a status value of NVME_SC_CMD_SEQ_ERROR is returned. Signed-off-by:
Amit Engel <amit.engel@dell.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Amit Engel authored
According to the NVMe specification, the response dword 0 value of the Connect command is based on status code: return cntlid for successful compeltion return IPO and IATTR for connect invalid parameters. Fix a missing error information for a zero sized queue, and return the cntlid also for I/O queue Connect commands. Signed-off-by:
-
Ruozhu Li authored
We update ctrl->queue_count and schedule another reconnect when io queue count is zero.But we will never try to create any io queue in next reco- nnection, because ctrl->queue_count already set to zero.We will end up having an admin-only session in Live state, which is exactly what we try to avoid in the original patch. Update ctrl->queue_count after queue_count zero checking to fix it. Signed-off-by:
Ruozhu Li <liruozhu@huawei.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Ruozhu Li authored
We update ctrl->queue_count and schedule another reconnect when io queue count is zero.But we will never try to create any io queue in next reco- nnection, because ctrl->queue_count already set to zero.We will end up having an admin-only session in Live state, which is exactly what we try to avoid in the original patch. Update ctrl->queue_count after queue_count zero checking to fix it. Signed-off-by:
-
Keith Busch authored
Each mutex_init() should have a corresponding mutex_destroy(). Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
-
Keith Busch authored
The NVMe host memory buffer may consume a non-negligable amount of memory. Controllers are required to function without the host memory buffer enabled, but with possibly degraded performance. Export a sysfs property to toggle this feature on a per-device granularity so users may choose to reclaim memory at the expense of storage performance. Signed-off-by:
-
Keith Busch authored
An idle suspend may or may not disable host memory access from devices placed in low power mode. Either way, it should always be safe to disable the host memory buffer prior to entering the low power mode, and this should also always be faster than a full device shutdown. Signed-off-by:
-
Colin Ian King authored
There are two occurrances where variable status is being assigned a value that is never read and it is being re-assigned a new value almost immediately afterwards on an error exit path. The assignments are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
Hou Pu authored
A nvme connect command produces following trace from the target side. Before: kworker/0:1H-56 [000] .... 9012.155139: nvmet_req_init: nvmet1: qid=0, cmdid=16, nsid=0, flags=0x40, meta=0x0, cmd=(nvme_admin_set_features, cdw10=07 00 00 00 07 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00) kworker/0:1H-56 [000] .... 9012.872272: nvmet_req_init: nvmet1: qid=0, cmdid=13, nsid=0, flags=0x40, meta=0x0, cmd=(nvme_admin_set_features, cdw10=0b 00 00 00 00 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00) cmdline:/sys/kernel/debug/tracing# cat trace | grep feature kworker/0:1H-56 [000] .... 203.493914: nvmet_req_init: nvmet1: qid=0, cmdid=29, nsid=0, flags=0x40, meta=0x0, cmd=(nvme_admin_set_features, fid=0x7, sv=0x0, cdw11=0x70007) kworker/0:1H-56 [000] .... 204.197079: nvmet_req_init: nvmet1: qid=0, cmdid=29, nsid=0, flags=0x40, meta=0x0, cmd=(nvme_admin_set_features, fid=0xb, sv=0x0, cdw11=0x900) Using ',' to separate different field like others in nvmet_trace_admin_get_features. Signed-off-by:Hou Pu <houpu.main@gmail.com> Signed-off-by:
-
Hou Pu authored
A nvme connect command produces following trace. Before: /sys/kernel/debug/tracing# cat trace | grep feature kworker/5:1H-98 [005] .... 3221.294844: nvme_setup_cmd: nvme0: qid=0, cmdid=25, nsid=0, flags=0x0, meta=0x0, cmd=(nvme_admin_set_features cdw10=07 00 00 00 07 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00) kworker/4:1H-124 [004] .... 3222.009186: nvme_setup_cmd: nvme0: qid=0, cmdid=17, nsid=0, flags=0x0, meta=0x0, cmd=(nvme_admin_set_features cdw10=0b 00 00 00 00 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00) After: /sys/kernel/debug/tracing# cat trace | grep feature kworker/0:1H-253 [000] .... 196.060509: nvme_setup_cmd: nvme0: qid=0, cmdid=29, nsid=0, flags=0x0, meta=0x0, cmd=(nvme_admin_set_features fid=0x7, sv=0x0, cdw11=0x70007) kworker/0:1H-253 [000] .... 196.763947: nvme_setup_cmd: nvme0: qid=0, cmdid=29, nsid=0, flags=0x0, meta=0x0, cmd=(nvme_admin_set_features fid=0xb, sv=0x0, cdw11=0x900) Using ',' to separate different field like others in nvmet_trace_admin_get_features. Signed-off-by: -
Hou Pu authored
Opts->host is NULL there. It is checked just before. So remove nvmf_host_put. It is introduced by commit 59a2f3f0 ("nvme: fix potential memory leak in option parsing"). Signed-off-by:
-
Keith Busch authored
An attribute should only be exporting one value as recommended in Documentation/filesystems/sysfs.rst. Implement CMB attributes this way. The old attribute will remain for backward compatibility. Signed-off-by:
-
Keith Busch authored
Appending sysfs files to the controller kobject is a bit clunky and becomes a maintenance problem as more attributes are added. The attribute group infrastructure handles this better, so use that. Signed-off-by:
-
Sagi Grimberg authored
We cannot detect a (perhaps buggy) controller that is sending us a completion for a request that was already completed (for example sending a completion twice), this phenomenon was seen in the wild a few times. So to protect against this, we use the upper 4 msbits of the nvme sqe command_id to use as a 4-bit generation counter and verify it matches the existing request generation that is incrementing on every execution. The 16-bit command_id structure now is constructed by: | xxxx | xxxxxxxxxxxx | gen request tag This means that we are giving up some possible queue depth as 12 bits allow for a maximum queue depth of 4095 instead of 65536, however we never create such long queues anyways so no real harm done. Suggested-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Daniel Wagner <dwagner@suse.de> Tested-by:
-
Sagi Grimberg authored
We already validate it when receiving the c2hdata pdu header and this is not changing so this is a redundant check. Reviewed-by:
-
Sagi Grimberg authored
We are going to use the upper 4-bits of the command_id for a generation counter, so enforce the new queue depth upper limit. As we enforce both min and max queue depth, use param_set_uint_minmax istead of open coding it. Reviewed-by:
-
Sagi Grimberg authored
It is a useful helper hence move it to common code so others can enjoy it. Suggested-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
- 14 Aug, 2021 1 commit
-
-
Christoph Hellwig authored
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts to produce Open Channel SSDs and never made it into the NVMe spec proper. They have since been superceeded by NVMe enhancements such as ZNS support. Remove the support per the deprecation schedule. Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Reviewed-by:
Javier González <javier@javigon.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 13 Aug, 2021 7 commits
-
-
Christoph Hellwig authored
nbd_index_mutex is currently held over add_disk and inside ->open, which leads to lock order reversals. Refactor the device creation code path so that nbd_dev_add is called without nbd_index_mutex lock held and only takes it for the IDR insertation. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Christoph Hellwig authored
Use idr_for_each_entry instead of the awkward callback to find an existing device for the index == -1 case, and de-duplicate the device allocation if no existing device was found. Signed-off-by:
-
Christoph Hellwig authored
Return the device we just allocated instead of doing an extra search for it in the caller. Signed-off-by:
-
Christoph Hellwig authored
Fold nbd_del_disk and remove the pointless NULL check on ->disk given that it is always set for a successfully allocated nbd_device structure. Signed-off-by:
-
Christoph Hellwig authored
Share common code for the synchronous and workqueue based device removal, and remove the pointless use of refcount_dec_and_mutex_lock. Signed-off-by:
-
Hou Tao authored
Now open_mutex is used to synchronize partition operations (e.g, blk_drop_partitions() and blkdev_reread_part()), however it makes nbd driver broken, because nbd may call del_gendisk() in nbd_release() or nbd_genl_disconnect() if NBD_CFLAG_DESTROY_ON_DISCONNECT is enabled, and deadlock occurs, as shown below: // AB-BA dead-lock nbd_genl_disconnect blkdev_open nbd_disconnect_and_put lock bd_mutex // last ref nbd_put lock nbd_index_mutex del_gendisk nbd_open try lock nbd_index_mutex try lock bd_mutex or // AA dead-lock nbd_release lock bd_mutex nbd_put try lock bd_mutex Instead of fixing block layer (e.g, introduce another lock), fixing the nbd driver to call del_gendisk() in a kworker when NBD_DESTROY_ON_DISCONNECT is enabled. When NBD_DESTROY_ON_DISCONNECT is disabled, nbd device will always be destroy through module removal, and there is no risky of deadlock. To ensure the reuse of nbd index succeeds, moving the calling of idr_remove() after del_gendisk(), so if the reused index is not found in nbd_index_idr, the old disk must have been deleted. And reusing the existing destroy_complete mechanism to ensure nbd_genl_connect() will wait for the completion of del_gendisk(). Also adding a new workqueue for nbd removal, so nbd_cleanup() can ensure all removals complete before exits. Reported-by: syzbot+0fe7752e52337864d29b@syzkaller.appspotmail.com Fixes: c76f48eb ("block: take bd_mutex around delete_partitions in del_gendisk") Signed-off-by:Hou Tao <houtao1@huawei.com> Signed-off-by:
-
Baokun Li authored
If user specify a large enough value of NBD blocks option, it may trigger signed integer overflow which may lead to nbd->config->bytesize becomes a large or small value, zero in particular. UBSAN: Undefined behaviour in drivers/block/nbd.c:325:31 signed integer overflow: 1024 * 4611686155866341414 cannot be represented in type 'long long int' [...] Call trace: [...] handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_mul_overflow+0x34/0x44 lib/ubsan.c:213 nbd_size_set drivers/block/nbd.c:325 [inline] __nbd_ioctl drivers/block/nbd.c:1342 [inline] nbd_ioctl+0x998/0xa10 drivers/block/nbd.c:1395 __blkdev_driver_ioctl block/ioctl.c:311 [inline] [...] Although it is not a big deal, still silence the UBSAN by limit the input value. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
-
- 10 Aug, 2021 1 commit
-
-
Colin Ian King authored
The variable err is being assigned a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210806110601.11386-1-colin.king@canonical.comSigned-off-by:
-
- 02 Aug, 2021 14 commits
-
-
Md Haris Iqbal authored
sysfs_emit function was added to be aware of the PAGE_SIZE maximum of the temporary buffer used for outputting sysfs content, so there is no possible overruns. So replace the uses of any s*printf functions for the sysfs show functions with sysfs_emit. Signed-off-by:
Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by:
Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20210726115950.470543-3-jinpu.wang@ionos.comSigned-off-by:
-
Gioh Kim authored
This patch replaces put_cpu_var with put_cpu_ptr because get_cpu_ptr should be paired with put_cpu_ptr. Signed-off-by:
Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by:
-
Damien Le Moal authored
In block/blk-mq-sysfs.c, struct blk_mq_ctx_sysfs_entry is not used to define any attribute since the "mq" sysfs directory contains only sub-directories (no attribute files). As a result, blk_mq_sysfs_show(), blk_mq_sysfs_store(), and struct sysfs_ops blk_mq_sysfs_ops are all unused and unnecessary. Remove all this unused code. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Link: https://lore.kernel.org/r/20210713081837.524422-1-damien.lemoal@wdc.comSigned-off-by:
-
Matteo Croce authored
Make the loop device raise a DISK_MEDIA_CHANGE event on attach or detach. # udevadm monitor -up |grep -e DISK_MEDIA_CHANGE -e DEVNAME & # losetup -f zero [ 7.454235] loop0: detected capacity change from 0 to 16384 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop0 DEVNAME=/dev/loop0 DEVNAME=/dev/loop0 # losetup -f zero [ 10.205245] loop1: detected capacity change from 0 to 16384 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop1 DEVNAME=/dev/loop1 DEVNAME=/dev/loop1 # losetup -f zero2 [ 13.532368] loop2: detected capacity change from 0 to 40960 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop2 DEVNAME=/dev/loop2 # losetup -D DEVNAME=/dev/loop1 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop1 DEVNAME=/dev/loop2 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop2 DEVNAME=/dev/loop0 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop0 Signed-off-by:
Matteo Croce <mcroce@microsoft.com> Reviewed-by:
Luca Boccassi <bluca@debian.org> Link: https://lore.kernel.org/r/20210712230530.29323-7-mcroce@linux.microsoft.comSigned-off-by:
-
Matteo Croce authored
Refactor disk_check_events() and move some code into disk_event_uevent(). Then add disk_force_media_change(), a helper which will be used by devices to force issuing a DISK_EVENT_MEDIA_CHANGE event. Co-developed-by:
-
Matteo Croce authored
Add a new sysfs handle to export the new diskseq value. Place it in <sysfs>/block/<disk>/diskseq and document it. $ grep . /sys/class/block/*/diskseq /sys/class/block/loop0/diskseq:13 /sys/class/block/loop1/diskseq:14 /sys/class/block/loop2/diskseq:5 /sys/class/block/loop3/diskseq:6 /sys/class/block/ram0/diskseq:1 /sys/class/block/ram1/diskseq:2 /sys/class/block/vda/diskseq:7 Reviewed-by: -
Matteo Croce authored
Add a new BLKGETDISKSEQ ioctl which retrieves the disk sequence number from the genhd structure. # ./getdiskseq /dev/loop* /dev/loop0: 13 /dev/loop0p1: 13 /dev/loop0p2: 13 /dev/loop0p3: 13 /dev/loop1: 14 /dev/loop1p1: 14 /dev/loop1p2: 14 /dev/loop2: 5 /dev/loop3: 6 Reviewed-by: -
Matteo Croce authored
Export the newly introduced diskseq in uevents: $ udevadm info /sys/class/block/* |grep -e DEVNAME -e DISKSEQ E: DEVNAME=/dev/loop0 E: DISKSEQ=1 E: DEVNAME=/dev/loop1 E: DISKSEQ=2 E: DEVNAME=/dev/loop2 E: DISKSEQ=3 E: DEVNAME=/dev/loop3 E: DISKSEQ=4 E: DEVNAME=/dev/loop4 E: DISKSEQ=5 E: DEVNAME=/dev/loop5 E: DISKSEQ=6 E: DEVNAME=/dev/loop6 E: DISKSEQ=7 E: DEVNAME=/dev/loop7 E: DISKSEQ=8 E: DEVNAME=/dev/nvme0n1 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p1 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p2 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p3 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p4 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p5 E: DISKSEQ=9 E: DEVNAME=/dev/sda E: DISKSEQ=10 E: DEVNAME=/dev/sda1 E: DISKSEQ=10 E: DEVNAME=/dev/sda2 E: DISKSEQ=10 Reviewed-by: -
Matteo Croce authored
Associating uevents with block devices in userspace is difficult and racy: the uevent netlink socket is lossy, and on slow and overloaded systems has a very high latency. Block devices do not have exclusive owners in userspace, any process can set one up (e.g. loop devices). Moreover, device names can be reused (e.g. loop0 can be reused again and again). A userspace process setting up a block device and watching for its events cannot thus reliably tell whether an event relates to the device it just set up or another earlier instance with the same name. Being able to set a UUID on a loop device would solve the race conditions. But it does not allow to derive orderings from uevents: if you see a uevent with a UUID that does not match the device you are waiting for, you cannot tell whether it's because the right uevent has not arrived yet, or it was already sent and you missed it. So you cannot tell whether you should wait for it or not. Associating a unique, monotonically increasing sequential number to the lifetime of each block device, which can be retrieved with an ioctl immediately upon setting it up, allows to solve the race conditions with uevents, and also allows userspace processes to know whether they should wait for the uevent they need or if it was dropped and thus they should move on. Additionally, increment the disk sequence number when the media change, i.e. on DISK_EVENT_MEDIA_CHANGE event. Reviewed-by:
-
Christoph Hellwig authored
cmdline-parser.c is only used by the cmdline faux partition format, so merge the code into that and avoid an indirect call. Signed-off-by:
-
Christoph Hellwig authored
Remove the disk_name function now that all users are gone. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20210727062518.122108-7-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
disk_name for partition 0 just copies out the disk_name field. Replace the call to disk_name with a %s format specifier. Signed-off-by:
-
Christoph Hellwig authored
Printk ->disk_name directly for the disk and use the %pg format specifier for the block device, which is equivalent to a bdevname call. Signed-off-by:
-
Christoph Hellwig authored
Simplify printing the partition name by using the %pg format specifier that is equivalent to a bdevname call. Signed-off-by:
-
