- 26 Mar, 2021 3 commits
-
-
Hongren Zheng (Zenithal) authored
The commit e0546fd8 ("usbip: tools: Start using VUDC backend in usbip tools") implemented device mode for user space tools, however the corresponding options are not documented in man page. This commit documents the options and provides examples on device mode. Also the command `usbip port` is documented. Acked-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Hongren Zheng <i@zenithal.me> Link: https://lore.kernel.org/r/YFrdyKKx1nx8bktm@SunSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
In list.h, the kernel-doc for list_del() should be immediately preceding the implementation and not separated from it by another function implementation. Eliminates this kernel-doc error: list.h:1: warning: 'list_del' not found Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210325174724.14447-1-rdunlap@infradead.orgSigned-off-by:
-
Bhaskar Chowdhury authored
s/Acknowlege/Acknowledge/ Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210325051023.27914-1-unixbhaskar@gmail.comSigned-off-by:
-
- 23 Mar, 2021 37 commits
-
-
Andy Shevchenko authored
Intel Minnowboard (v1) uses SCH GPIO line SUS7 (i.e. 12) for VBUS sense. Provide a DMI based quirk to have it's being used. Fixes: e20849a8 ("usb: gadget: pch_udc: Convert to use GPIO descriptors") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210323153626.54908-7-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
During conversion to use GPIO descriptors the device pointer, which is applied to devm_gpiod_get(), is not yet initialized. Move initialization in the ->probe() in order to have it set before use. Fixes: e20849a8 ("usb: gadget: pch_udc: Convert to use GPIO descriptors") Signed-off-by:
-
Andy Shevchenko authored
The commit d3cb25a1 ("usb: gadget: udc: fix spin_lock in pch_udc") obviously was not thought through and had made the situation even worse than it was before. Two changes after almost reverted it. but a few leftovers have been left as it. With this revert d3cb25a1 completely. While at it, narrow down the scope of unlocked section to prevent potential race when prot_stall is assigned. Fixes: d3cb25a1 ("usb: gadget: udc: fix spin_lock in pch_udc") Fixes: 9903b6be ("usb: gadget: pch-udc: fix lock") Fixes: 1d23d16a ("usb: gadget: pch_udc: reorder spin_[un]lock to avoid deadlock") Cc: Iago Abal <mail@iagoabal.eu> Signed-off-by:
-
Andy Shevchenko authored
Kernel doc and the content described by it shouldn't be torn apart. Otherwise validator is not happy: .../pch_udc.c:573: warning: expecting prototype for pch_udc_reconnect(). Prototype was for pch_udc_init() instead Fixes: 1c575d2d ("usb: gadget: pch_udc: Fix usb/gadget/pch_udc: Fix ether gadget connect/disconnect issue") Signed-off-by:
-
Andy Shevchenko authored
DMA mapping might fail, we have to check it with dma_mapping_error(). Otherwise DMA-API is not happy: DMA-API: pch_udc 0000:02:02.4: device driver failed to check map error[device address=0x00000000027ee678] [size=64 bytes] [mapped as single] Fixes: abab0c67 ("usb: pch_udc: Fixed issue which does not work with g_serial") Signed-off-by:
-
Andy Shevchenko authored
Since we have a separate routine for VBUS sense, the interrupt may occur before gadget driver is present. Hence, ->setup() call may oops the kernel: [ 55.245843] BUG: kernel NULL pointer dereference, address: 00000010 ... [ 55.245843] EIP: pch_udc_isr.cold+0x162/0x33f ... [ 55.245843] <IRQ> [ 55.245843] ? pch_udc_svc_data_out+0x160/0x160 Check if driver is present before calling ->setup(). Fixes: f646cf94 ("USB device driver of Topcliff PCH") Signed-off-by:
-
Andy Shevchenko authored
Either way ~0 will be in the correct byte order, hence replace cpu_to_le32() by lower_32_bits(). Moreover, it makes sparse happy, otherwise it complains: .../pch_udc.c:1813:27: warning: incorrect type in assignment (different base types) .../pch_udc.c:1813:27: expected unsigned int [usertype] dataptr .../pch_udc.c:1813:27: got restricted __le32 [usertype] Fixes: f646cf94 ("USB device driver of Topcliff PCH") Signed-off-by:
-
Thinh Nguyen authored
Now that we replaced the xhci_create_usb3_bos_desc() function. We can remove it along with the static usb_bos_descriptor structure. Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ce0acbbd0bd3c3c3a08e6418ab3bdb431a44bbfd.1615432770.git.Thinh.Nguyen@synopsys.comSigned-off-by:
-
Thinh Nguyen authored
The current xhci_create_usb3_bos_desc() uses a static bos u8 array and various magic numbers and offsets making it difficult to extend support for USB 3.2. Let's rewrite this entire function to support dual-lane in USB 3.2. The hub driver matches the port speed ID from the extended port status to the SSID of the sublink speed attributes to detect if the device supports SuperSpeed Plus. Currently we don't provide the default gen1x2 and gen2x2 sublink speed capability descriptor for USB 3.2 roothub. The USB stack depends on this to detect and match the correct speed. In addition, if the xHCI host provides Protocol Speed ID (PSI) capability, then make sure to convert Protocol Speed ID Mantissa and Exponent (PSIM & PSIE) to lane speed for gen1x2 and gen2x2. Acked-by:
-
Thinh Nguyen authored
Some hosts incorrectly use sub-minor version for minor version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01 for bcdUSB 0x310). Currently the xHCI driver works around this by just checking for minor revision > 0x01 for USB 3.1 everywhere. With the addition of USB 3.2, checking this gets a bit cumbersome. Since there is no USB release with bcdUSB 0x301 to 0x309, we can assume that sub-minor version 01 to 09 is incorrect. Let's try to fix this and use the minor revision that matches with the USB/xHCI spec to help with the version checking within the driver. Acked-by:
-
Thinh Nguyen authored
Initialize USB 3.x root hub SuperSpeed Plus rate. Acked-by:
-
kernel test robot authored
drivers/usb/gadget/function/f_fs.c:3829:8-15: WARNING opportunity for memdup_user Use memdup_user rather than duplicating its implementation This is a little bit restricted to reduce false positives Generated by: scripts/coccinelle/api/memdup_user.cocci Fixes: 8704fd73 ("USB: gadget: f_fs: remove likely/unlikely") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Jia-Ju Bai authored
When usb_otg_descriptor_alloc() returns NULL to usb_desc, no error return code of msg_bind() is assigned. To fix this bug, status is assigned with -ENOMEM in this case. Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20210323123648.3997-1-baijiaju1990@gmail.comSigned-off-by:
-
Thinh Nguyen authored
Check for usb_device->ssp_rate to output the signaling rate for genXxY. Signed-off-by:
-
Thinh Nguyen authored
Check for usb_device->ssp_rate to print the SuperSpeed Plus signaling rate generation and lane count. Signed-off-by:
-
Thinh Nguyen authored
The get_port_ssp_rate() can replace port_speed_is_ssp(). If the port speed is detected to be in gen2x1, gen1x2, or gen2x2, then the port is operating at SuperSpeed Plus. Signed-off-by:
-
Thinh Nguyen authored
Introduce ssp_rate field to usb_device structure to capture the connected SuperSpeed Plus signaling rate generation and lane count with the corresponding usb_ssp_rate enum. Signed-off-by:
-
Wesley Cheng authored
The current dwc3_gadget_reset_interrupt() will stop any active transfers, but only addresses blocking of EP queuing for while we are coming from a disconnected scenario, i.e. after receiving the disconnect event. If the host decides to issue a bus reset on the device, the connected parameter will still be set to true, allowing for EP queuing to continue while we are disabling the functions. To avoid this, set the connected flag to false until the stop active transfers is complete. Signed-off-by:
Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1616146285-19149-3-git-send-email-wcheng@codeaurora.orgSigned-off-by:
-
Wesley Cheng authored
Add checks similar to dwc3_gadget_ep_queue() before kicking off transfers after getting an endpoint completion event. Since cleaning up completed requests will momentarily unlock dwc->lock, there is a chance for a sequence like pullup disable to be executed. This can lead to preparing a TRB, which will be removed by the pullup disable routine. Signed-off-by:
-
Johan Hovold authored
Force-threaded interrupt handlers used to run with interrupts enabled, something which could lead to deadlocks in case a threaded handler shared a lock with code running in hard interrupt context (e.g. timer callbacks) and did not explicitly disable interrupts. Since commit 81e2073c ("genirq: Disable interrupts for force threaded handlers") interrupt handlers always run with interrupts disabled on non-RT so that drivers no longer need to do handle forced threading ("threadirqs"). Drop the now obsolete workaround added by commit 63aea0db ("USB: xhci: fix lock-inversion problem"). Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210322111140.32056-1-johan@kernel.orgSigned-off-by:
-
Rasmus Villemoes authored
These were added in commit 780cc0f3 ("usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register()") to silence modpost, but they didn't fix the real problem - that was fixed later by removing wrong __init annotations in commit c94e289f ("usb: gadget: remove incorrect __init/__exit annotations"). It really never makes sense for a function to be marked __ref unless it (1) has some conditional that chooses whether to call an __init function (or access __initdata) or not and (2) has a comment explaining why the __ref is there and why it is safe. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20210323081607.405904-1-linux@rasmusvillemoes.dkSigned-off-by:
-
Ruslan Bilovol authored
Usage of strlcpy in Linux Kernel has been recently deprecated [1], convert driver to strscpy [1] https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Ruslan Bilovol <ruslan.bilovol@gmail.com> Link: https://lore.kernel.org/r/1614603943-11668-2-git-send-email-ruslan.bilovol@gmail.comSigned-off-by:
-
Ruslan Bilovol authored
User can configure f_uac1 function via p_chmask/c_chmask whether uac1 shall support playback and/or capture, but it has only effect on the created ALSA device, but not on the USB descriptor. This patch adds playback/capture descriptors dependent on that parameter. It is similar to the same conversion done earlier for f_uac2 Signed-off-by:
-
Ruslan Bilovol authored
Currently user can configure UAC1 function with parameters that violate UAC1 spec or are not supported by UAC1 gadget implementation. This can lead to incorrect behavior if such gadget is connected to the host - like enumeration failure or other issues depending on host's UAC1 driver implementation, bringing user to a long hours of debugging the issue. Instead of silently accept these parameters, throw an error if they are not valid. Signed-off-by:
-
Ruslan Bilovol authored
Currently user can configure UAC2 function with parameters that violate UAC2 spec or are not supported by UAC2 gadget implementation. This can lead to incorrect behavior if such gadget is connected to the host - like enumeration failure or other issues depending on host's UAC2 driver implementation, bringing user to a long hours of debugging the issue. Instead of silently accept these parameters, throw an error if they are not valid. Signed-off-by:
-
Jia-Ju Bai authored
When usb_otg_descriptor_alloc() returns NULL to usb_desc, no error return code of multi_bind() is assigned. To fix this bug, status is assigned with -ENOMEM in this case. Reported-by:
-
Pawel Laszczak authored
Patch adds support of SS and SSP speed. Signed-off-by:
Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20210310105216.38202-1-pawell@gli-login.cadence.comSigned-off-by:
-
Dmitry Osipenko authored
Silence deferred probe error caused by the PHY driver which is probed later than the ChipIdea driver. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210314203927.2572-1-digetx@gmail.comSigned-off-by:
-
Dean Anderson authored
Fixes bug with the handling of more than one language in the string table in f_fs.c. str_count was not reset for subsequent language codes. str_count-- "rolls under" and processes u32 max strings on the processing of the second language entry. The existing bug can be reproduced by adding a second language table to the structure "strings" in tools/usb/ffs-test.c. Signed-off-by:
Dean Anderson <dean@sensoray.com> Link: https://lore.kernel.org/r/20210317224109.21534-1-dean@sensoray.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Manish Narani authored
Add a new driver for supporting Xilinx platforms. This driver is used for some sequence of operations required for Xilinx USB controllers. This driver is also used to choose between PIPE clock coming from SerDes and the Suspend Clock. Before the controller is out of reset, the clock selection should be changed to PIPE clock in order to make the USB controller work. There is a register added in Xilinx USB controller register space for the same. Signed-off-by:
Manish Narani <manish.narani@xilinx.com> Link: https://lore.kernel.org/r/1615963949-75320-3-git-send-email-manish.narani@xilinx.comSigned-off-by:
-
Manish Narani authored
Add documentation for Versal DWC3 controller. Add required property 'reg' for the same. Also add optional properties for snps,dwc3. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jia-Ju Bai authored
When __usbhsf_pkt_get() returns NULL to pkt, no error return code of usbhsf_pkt_handler() is assigned. To fix this bug, ret is assigned with -EINVAL in this case. Reported-by:
-
Thinh Nguyen authored
None of the DWC_usb3x IPs (and all their versions) supports low-speed setting in device mode. In the early days, our "Early Adopter Edition" DWC_usb3 databook shows that the controller may be configured to operate in low-speed, but it was revised on release. Let's remove this invalid speed setting to avoid any confusion. Signed-off-by:
-
Shubhankar Kuranagatti authored
The * has been aligned on each line for block comment. Signed-off-by:
Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210311190901.gaw7m7ndib3uzakm@kewl-virtual-machineSigned-off-by:
-
Shubhankar Kuranagatti authored
A space was given after tab key. The extra space has been removed. This is done to maintain uniformity in the code. Signed-off-by:
-
Johan Hovold authored
It's been almost twenty years since the interface "private data" pointer was removed in favour of using the driver-data pointer of struct device. Let's rename the driver-data parameter of usb_driver_claim_interface() so that it better reflects how it's used. Signed-off-by:
-
Johan Hovold authored
It's been almost twenty years since USB drivers returned a data pointer from their probe routines in order to bind to an interface. Time to update the documentation for usb_driver_claim_interface(). Signed-off-by:
-
