- 12 Aug, 2021 8 commits
-
-
Christoph Hellwig authored
Let the callers call del_gendisk so that we can check if add_disk has been called properly for the cached device case instead of relying on the block layer internal GENHD_FL_UP flag. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20210809064028.1198327-8-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Except for the IDA none of the allocations in bcache_device_init is unwound on error, fix that. Signed-off-by:
-
Christoph Hellwig authored
Remove usage of the block layer internal GENHD_FL_UP by just looking at the host state. Signed-off-by:
-
Christoph Hellwig authored
Use the nvme-internal NVME_NSHEAD_DISK_LIVE flag instead of abusing the block layer state. Signed-off-by:
-
Christoph Hellwig authored
Early probe failure never reaches nvme_ns_remove, so GENHD_FL_UP must be set at this point. Remove the check. Signed-off-by:
-
Christoph Hellwig authored
Restructure mmc_blk_probe to avoid a failure path with a half created disk. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210809064028.1198327-3-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Pass the attribute group for the attributes on the gendisk to device_add_disk so that they are created atomically with the disk creation. Signed-off-by:
-
Guoqing Jiang authored
Move them (PAGE_SECTORS_SHIFT, PAGE_SECTORS and SECTOR_MASK) to the generic header file to remove redundancy. Signed-off-by:
Guoqing Jiang <jiangguoqing@kylinos.cn> Link: https://lore.kernel.org/r/20210721025315.1729118-1-guoqing.jiang@linux.devSigned-off-by:
-
- 10 Aug, 2021 1 commit
-
-
Christoph Hellwig authored
Fix the !CONFIG_BLOCK build after the recent cleanup. Fixes: 5ed964f8 ("mm: hide laptop_mode_wb_timer entirely behind the BDI API") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 09 Aug, 2021 14 commits
-
-
Ming Lei authored
When merging one bio to request, if they are discard IO and the queue supports multi-range discard, we need to return ELEVATOR_DISCARD_MERGE because both block core and related drivers(nvme, virtio-blk) doesn't handle mixed discard io merge(traditional IO merge together with discard merge) well. Fix the issue by returning ELEVATOR_DISCARD_MERGE in this situation, so both blk-mq and drivers just need to handle multi-range discard. Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Tested-by:
-
Christoph Hellwig authored
Just retrieve the bdi from the disk. Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210809141744.1203023-6-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
The backing device information only makes sense for file system I/O, and thus belongs into the gendisk and not the lower level request_queue structure. Move it there. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check if a gendisk is associated with a request_queue. Signed-off-by:
-
Christoph Hellwig authored
.. and rename the function to disk_update_readahead. This is in preparation for moving the BDI from the request_queue to the gendisk. Signed-off-by:
-
Christoph Hellwig authored
Don't leak the detaіls of the timer into the block layer, instead initialize the timer in bdi_alloc and delete it in bdi_unregister. Note that this means the timer is initialized (but not armed) for non-block queues as well now. Signed-off-by:
-
Christoph Hellwig authored
Now that device mapper has been changed to register the disk once it is fully ready all this code is unused. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20210804094147.459763-9-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
device mapper is currently the only outlier that tries to call register_disk after add_disk, leading to fairly inconsistent state of these block layer data structures. Instead change device-mapper to just register the gendisk later now that the holder mechanism can cope with that. Note that this introduces a user visible change: the dm kobject is now only visible after the initial table has been loaded. Signed-off-by:
-
Christoph Hellwig authored
Move setting md->type from both callers into dm_setup_md_queue. This ensures that md->type is only set to a valid value after the queue has been fully setup, something we'll rely on future changes. Signed-off-by:
-
Christoph Hellwig authored
md->queue is now always set when md->disk is set, so simplify the conditionals a bit. Signed-off-by:
-
Christoph Hellwig authored
device mapper needs to register holders before it is ready to do I/O. Currently it does so by registering the disk early, which can leave the disk and queue in a weird half state where the queue is registered with the disk, except for sysfs and the elevator. And this state has been a bit promlematic before, and will get more so when sorting out the responsibilities between the queue and the disk. Support registering holders on an initialized but not registered disk instead by delaying the sysfs registration until the disk is registered. Signed-off-by:
-
Christoph Hellwig authored
Invert they way the holder relations are tracked. This very slightly reduces the memory overhead for partitioned devices. Signed-off-by:
-
Christoph Hellwig authored
Since commit 0d02129e ("block: merge struct block_device and struct hd_struct") there is no way for the bdev to go away as long as there is a holder, so remove the extra references. Signed-off-by:
-
Christoph Hellwig authored
Move the block holder code into a separate file as it is not in any way related to the other block_dev.c code, and add a new selectable config option for it so that we don't have to build it without any remapped drivers selected. The Kconfig symbol contains a _DEPRECATED suffix to match the comments added in commit 49731baa ("block: restore multiple bd_link_disk_holder() support"). Signed-off-by:
-
- 05 Aug, 2021 2 commits
-
-
Bart Van Assche authored
We noticed that the user interface of Android devices becomes very slow under memory pressure. This is because Android uses the zram driver on top of the loop driver for swapping, because under memory pressure the swap code alternates reads and writes quickly, because mq-deadline is the default scheduler for loop devices and because mq-deadline delays writes by five seconds for such a workload with default settings. Fix this by making the kernel select I/O scheduler 'none' from inside add_disk() for loop devices. This default can be overridden at any time from user space, e.g. via a udev rule. This approach has an advantage compared to changing the I/O scheduler from userspace from 'mq-deadline' into 'none', namely that synchronize_rcu() does not get called. This patch changes the default I/O scheduler for loop devices from 'mq-deadline' into 'none'. Additionally, this patch reduces the Android boot time on my test setup with 0.5 seconds compared to configuring the loop I/O scheduler from user space. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Martijn Coenen <maco@android.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210805174200.3250718-3-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
elevator_get_default() uses the following algorithm to select an I/O scheduler from inside add_disk(): - In case of a single hardware queue or if sharing hardware queues across multiple request queues (BLK_MQ_F_TAG_HCTX_SHARED), use mq-deadline. - Otherwise, use 'none'. This is a good choice for most but not for all block drivers. Make it possible to override the selection of mq-deadline with a new flag, namely BLK_MQ_F_NO_SCHED_BY_DEFAULT. Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Martijn Coenen <maco@android.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
- 02 Aug, 2021 15 commits
-
-
Damien Le Moal authored
In block/blk-mq-sysfs.c, struct blk_mq_ctx_sysfs_entry is not used to define any attribute since the "mq" sysfs directory contains only sub-directories (no attribute files). As a result, blk_mq_sysfs_show(), blk_mq_sysfs_store(), and struct sysfs_ops blk_mq_sysfs_ops are all unused and unnecessary. Remove all this unused code. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Link: https://lore.kernel.org/r/20210713081837.524422-1-damien.lemoal@wdc.comSigned-off-by:
-
Matteo Croce authored
Make the loop device raise a DISK_MEDIA_CHANGE event on attach or detach. # udevadm monitor -up |grep -e DISK_MEDIA_CHANGE -e DEVNAME & # losetup -f zero [ 7.454235] loop0: detected capacity change from 0 to 16384 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop0 DEVNAME=/dev/loop0 DEVNAME=/dev/loop0 # losetup -f zero [ 10.205245] loop1: detected capacity change from 0 to 16384 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop1 DEVNAME=/dev/loop1 DEVNAME=/dev/loop1 # losetup -f zero2 [ 13.532368] loop2: detected capacity change from 0 to 40960 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop2 DEVNAME=/dev/loop2 # losetup -D DEVNAME=/dev/loop1 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop1 DEVNAME=/dev/loop2 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop2 DEVNAME=/dev/loop0 DISK_MEDIA_CHANGE=1 DEVNAME=/dev/loop0 Signed-off-by:
Matteo Croce <mcroce@microsoft.com> Reviewed-by:
Luca Boccassi <bluca@debian.org> Link: https://lore.kernel.org/r/20210712230530.29323-7-mcroce@linux.microsoft.comSigned-off-by:
-
Matteo Croce authored
Refactor disk_check_events() and move some code into disk_event_uevent(). Then add disk_force_media_change(), a helper which will be used by devices to force issuing a DISK_EVENT_MEDIA_CHANGE event. Co-developed-by:
-
Matteo Croce authored
Add a new sysfs handle to export the new diskseq value. Place it in <sysfs>/block/<disk>/diskseq and document it. $ grep . /sys/class/block/*/diskseq /sys/class/block/loop0/diskseq:13 /sys/class/block/loop1/diskseq:14 /sys/class/block/loop2/diskseq:5 /sys/class/block/loop3/diskseq:6 /sys/class/block/ram0/diskseq:1 /sys/class/block/ram1/diskseq:2 /sys/class/block/vda/diskseq:7 Reviewed-by: -
Matteo Croce authored
Add a new BLKGETDISKSEQ ioctl which retrieves the disk sequence number from the genhd structure. # ./getdiskseq /dev/loop* /dev/loop0: 13 /dev/loop0p1: 13 /dev/loop0p2: 13 /dev/loop0p3: 13 /dev/loop1: 14 /dev/loop1p1: 14 /dev/loop1p2: 14 /dev/loop2: 5 /dev/loop3: 6 Reviewed-by: -
Matteo Croce authored
Export the newly introduced diskseq in uevents: $ udevadm info /sys/class/block/* |grep -e DEVNAME -e DISKSEQ E: DEVNAME=/dev/loop0 E: DISKSEQ=1 E: DEVNAME=/dev/loop1 E: DISKSEQ=2 E: DEVNAME=/dev/loop2 E: DISKSEQ=3 E: DEVNAME=/dev/loop3 E: DISKSEQ=4 E: DEVNAME=/dev/loop4 E: DISKSEQ=5 E: DEVNAME=/dev/loop5 E: DISKSEQ=6 E: DEVNAME=/dev/loop6 E: DISKSEQ=7 E: DEVNAME=/dev/loop7 E: DISKSEQ=8 E: DEVNAME=/dev/nvme0n1 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p1 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p2 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p3 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p4 E: DISKSEQ=9 E: DEVNAME=/dev/nvme0n1p5 E: DISKSEQ=9 E: DEVNAME=/dev/sda E: DISKSEQ=10 E: DEVNAME=/dev/sda1 E: DISKSEQ=10 E: DEVNAME=/dev/sda2 E: DISKSEQ=10 Reviewed-by: -
Matteo Croce authored
Associating uevents with block devices in userspace is difficult and racy: the uevent netlink socket is lossy, and on slow and overloaded systems has a very high latency. Block devices do not have exclusive owners in userspace, any process can set one up (e.g. loop devices). Moreover, device names can be reused (e.g. loop0 can be reused again and again). A userspace process setting up a block device and watching for its events cannot thus reliably tell whether an event relates to the device it just set up or another earlier instance with the same name. Being able to set a UUID on a loop device would solve the race conditions. But it does not allow to derive orderings from uevents: if you see a uevent with a UUID that does not match the device you are waiting for, you cannot tell whether it's because the right uevent has not arrived yet, or it was already sent and you missed it. So you cannot tell whether you should wait for it or not. Associating a unique, monotonically increasing sequential number to the lifetime of each block device, which can be retrieved with an ioctl immediately upon setting it up, allows to solve the race conditions with uevents, and also allows userspace processes to know whether they should wait for the uevent they need or if it was dropped and thus they should move on. Additionally, increment the disk sequence number when the media change, i.e. on DISK_EVENT_MEDIA_CHANGE event. Reviewed-by:
-
Christoph Hellwig authored
cmdline-parser.c is only used by the cmdline faux partition format, so merge the code into that and avoid an indirect call. Signed-off-by:
-
Christoph Hellwig authored
Remove the disk_name function now that all users are gone. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20210727062518.122108-7-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
disk_name for partition 0 just copies out the disk_name field. Replace the call to disk_name with a %s format specifier. Signed-off-by:
-
Christoph Hellwig authored
Printk ->disk_name directly for the disk and use the %pg format specifier for the block device, which is equivalent to a bdevname call. Signed-off-by:
-
Christoph Hellwig authored
Simplify printing the partition name by using the %pg format specifier that is equivalent to a bdevname call. Signed-off-by:
-
Christoph Hellwig authored
Simplify printing the partition name by using the %pg format specifier that is equivalent to a bdevname call. Signed-off-by:
-
Abd-Alrhman Masalkhi authored
I have compiled the kernel with a cross compiler "hppa-linux-gnu-" v9.3.0 on x86-64 host machine. I got the following warning: block/genhd.c: In function ‘diskstats_show’: block/genhd.c:1227:1: warning: the frame size of 1688 bytes is larger than 1280 bytes [-Wframe-larger-than=] 1227 | } By Reduced the stack footprint by using the %pg printk specifier instead of disk_name to remove the need for the on-stack buffer. Signed-off-by:
Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
-
Christoph Hellwig authored
Now that we've stopped using inode references for anything meaninful in the block layer get rid of the helper to put it and just open code the call to iput on the block_device inode. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Chaitanya Kulkarni <ckulkarnilinux@gmail.com> Link: https://lore.kernel.org/r/20210722075402.983367-10-hch@lst.deSigned-off-by:
-
