- 10 Dec, 2019 40 commits
-
-
Richard Guy Briggs authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit ea956d8b ] Empty executable arguments were being skipped when printing out the list of arguments in an EXECVE record, making it appear they were somehow lost. Include empty arguments as an itemized empty string. Reproducer: autrace /bin/ls "" "/etc" ausearch --start recent -m execve -i | grep EXECVE type=EXECVE msg=audit(10/03/2018 13:04:03.208:1391) : argc=3 a0=/bin/ls a2=/etc With fix: type=EXECVE msg=audit(10/03/2018 21:51:38.290:194) : argc=3 a0=/bin/ls a1= a2=/etc type=EXECVE msg=audit(1538617898.290:194): argc=3 a0="/bin/ls" a1="" a2="/etc" Passes audit-testsuite. GH issue tracker at https://github.com/linux-audit/audit-kernel/issues/99Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> [PM: cleaned up the commit metadata] Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Valentin Schneider authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 3f130a37 ] When load_balance() fails to move some load because of task affinity, we end up increasing sd->balance_interval to delay the next periodic balance in the hopes that next time we look, that annoying pinned task(s) will be gone. However, idle_balance() pays no attention to sd->balance_interval, yet it will still lead to an increase in balance_interval in case of pinned tasks. If we're going through several newidle balances (e.g. we have a periodic task), this can lead to a huge increase of the balance_interval in a very small amount of time. To prevent that, don't increase the balance interval when going through a newidle balance. This is a similar approach to what is done in commit 58b26c4c ("sched: Increment cache_nice_tries only on periodic lb"), where we disregard newidle balance and rely on periodic balance for more stable results. Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar.Eggemann@arm.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: patrick.bellasi@arm.com Cc: vincent.guittot@linaro.org Link: http://lkml.kernel.org/r/1537974727-30788-2-git-send-email-valentin.schneider@arm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit fe60faa5 ] Before calling dev_hard_start_xmit(), upper layers tried to cook optimal skb list based on BQL budget. Problem is that GSO packets can end up comsuming more than the BQL budget. Breaking the loop is not useful, since requeued packets are ahead of any packets still in the qdisc. It is also more expensive, since next TX completion will push these packets later, while skbs are not in cpu caches. It is also a behavior difference with TSO packets, that can break the BQL limit by a large amount. Note that drivers should use __netdev_tx_sent_queue() in order to have optimal xmit_more support, and avoid useless atomic operations as shown in the following patch. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Larry Chen authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 6194ae42 ] ocfs2_defrag_extent() might leak allocated clusters. When the file system has insufficient space, the number of claimed clusters might be less than the caller wants. If that happens, the original code might directly commit the transaction without returning clusters. This patch is based on code in ocfs2_add_clusters_in_btree(). [akpm@linux-foundation.org: include localalloc.h, reduce scope of data_ac] Link: http://lkml.kernel.org/r/20180904041621.16874-3-lchen@suse.comSigned-off-by:
Larry Chen <lchen@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Changwei Ge authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit cf76c785 ] ocfs2_read_blocks() and ocfs2_read_blocks_sync() are both used to read several blocks from disk. Currently, the input argument *bhs* can be NULL or NOT. It depends on the caller's behavior. If the function fails in reading blocks from disk, the corresponding bh will be assigned to NULL and put. Obviously, above process for non-NULL input bh is not appropriate. Because the caller doesn't even know its bhs are put and re-assigned. If buffer head is managed by caller, ocfs2_read_blocks and ocfs2_read_blocks_sync() should not evaluate it to NULL. It will cause caller accessing illegal memory, thus crash. Link: http://lkml.kernel.org/r/HK2PR06MB045285E0F4FBB561F9F2F9B3D5680@HK2PR06MB0452.apcprd06.prod.outlook.comSigned-off-by:
Changwei Ge <ge.changwei@h3c.com> Reviewed-by:
Guozhonghua <guozhonghua@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by:
-
Dave Jiang authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 7756e2b5 ] ndev_vec_mask() should be returning u64 mask value instead of int. Otherwise the mask value returned can be incorrect for larger vectors. Fixes: e26a5843 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Tested-by:
Lucas Van <lucas.van@intel.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Jon Mason authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit a861594b ] The tx_time should be in usecs (according to the comment above the variable), but the setting of the timer during the rearming is done in msecs. Change it to match the expected units. Fixes: e74bfeed ("NTB: Add flow control to the ntb_netdev") Suggested-by:
Gerd W. Haeussler <gerd.haeussler@cesys-it.com> Signed-off-by:
-
Miroslav Lichvar authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 094bf4d0 ] The timecounter needs to be updated at least once per ~550 seconds in order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old timestamp. Since commit 500462a9 ("timers: Switch to a non-cascading wheel"), scheduling of delayed work seems to be less accurate and a requested delay of 540 seconds may actually be longer than 550 seconds. Shorten the delay to 480 seconds to be sure the timecounter is updated in time. This fixes an issue with HW timestamps on 82580/I350/I354 being off by ~1100 seconds for few seconds every ~9 minutes. Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 6c9a3f84 ] Currently extent and index i are both being incremented causing an array out of bounds read on extent[i]. Fix this by removing the extraneous increment of extent. Ernesto said: : This is only triggered when deleting a file with a resource fork. I : may be wrong because the documentation isn't clear, but I don't think : you can create those under linux. So I guess nobody was testing them. : : > A disk space leak, perhaps? : : That's what it looks like in general. hfs_free_extents() won't do : anything if the block count doesn't add up, and the error will be : ignored. Now, if the block count randomly does add up, we could see : some corruption. Detected by CoverityScan, CID#711541 ("Out of bounds read") Link: http://lkml.kernel.org/r/20180831140538.31566-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Ernesto A. Fernndez <ernesto.mnd.fernandez@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 1267a07b ] Direct writes to empty inodes fail with EIO. The generic direct-io code is in part to blame (a patch has been submitted as "direct-io: allow direct writes to empty inodes"), but hfs is worse affected than the other filesystems because the fallback to buffered I/O doesn't happen. The problem is the return value of hfs_get_block() when called with !create. Change it to be more consistent with the other modules. Link: http://lkml.kernel.org/r/4538ab8c35ea37338490525f0f24cbc37227528c.1539195310.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 839c3a6a ] Direct writes to empty inodes fail with EIO. The generic direct-io code is in part to blame (a patch has been submitted as "direct-io: allow direct writes to empty inodes"), but hfsplus is worse affected than the other filesystems because the fallback to buffered I/O doesn't happen. The problem is the return value of hfsplus_get_block() when called with !create. Change it to be more consistent with the other modules. Link: http://lkml.kernel.org/r/2cd1301404ec7cf1e39c8f11a01a4302f1460ad6.1539195310.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 54640c75 ] Inserting a new record in a btree may require splitting several of its nodes. If we hit ENOSPC halfway through, the new nodes will be left orphaned and their records will be lost. This could mean lost inodes or extents. Henceforth, check the available disk space before making any changes. This still leaves the potential problem of corruption on ENOMEM. There is no need to reserve space before deleting a catalog record, as we do for hfsplus. This difference is because hfs index nodes have fixed length keys. Link: http://lkml.kernel.org/r/ab5fc8a7d5ffccfd5f27b1cf2cb4ceb6c110da74.1536269131.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit d92915c3 ] Inserting or deleting a record in a btree may require splitting several of its nodes. If we hit ENOSPC halfway through, the new nodes will be left orphaned and their records will be lost. This could mean lost inodes, extents or xattrs. Henceforth, check the available disk space before making any changes. This still leaves the potential problem of corruption on ENOMEM. The patch can be tested with xfstests generic/027. Link: http://lkml.kernel.org/r/4596eef22fbda137b4ffa0272d92f0da15364421.1536269129.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit ef75bcc5 ] hfs_brec_update_parent() may hit BUG_ON() if the first record of both a leaf node and its parent are changed, and if this forces the parent to be split. It is not possible for this to happen on a valid hfs filesystem because the index nodes have fixed length keys. For reasons I ignore, the hfs module does have support for a number of hfsplus features. A corrupt btree header may report variable length keys and trigger this BUG, so it's better to fix it. Link: http://lkml.kernel.org/r/cf9b02d57f806217a2b1bf5db8c3e39730d8f603.1535682463.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 19a9d0f1 ] Creating, renaming or deleting a file may hit BUG_ON() if the first record of both a leaf node and its parent are changed, and if this forces the parent to be split. This bug is triggered by xfstests generic/027, somewhat rarely; here is a more reliable reproducer: truncate -s 50M fs.iso mkfs.hfsplus fs.iso mount fs.iso /mnt i=1000 while [ $i -le 2400 ]; do touch /mnt/$i &>/dev/null ((++i)) done i=2400 while [ $i -ge 1000 ]; do mv /mnt/$i /mnt/$(perl -e "print $i x61") &>/dev/null ((--i)) done The issue is that a newly created bnode is being put twice. Reset new_node to NULL in hfs_brec_update_parent() before reaching goto again. Link: http://lkml.kernel.org/r/5ee1db09b60373a15890f6a7c835d00e76bf601d.1535682461.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Rasmus Villemoes authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit d9873969 ] Most other bitmap API, including the OOL version __bitmap_shift_right, take unsigned nbits. This was accidentally left out from 2fbad299. Link: http://lkml.kernel.org/r/20180818131623.8755-5-linux@rasmusvillemoes.dk Fixes: 2fbad299 ("lib: bitmap: change bitmap_shift_right to take unsigned parameters") Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reported-by:
Yury Norov <ynorov@caviumnetworks.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Rasmus Villemoes authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 7275b097 ] The static inlines in bitmap.h do not handle a compile-time constant nbits==0 correctly (they dereference the passed src or dst pointers, despite only 0 words being valid to access). I had the 0-day buildbot chew on a patch [1] that would cause build failures for such cases without complaining, suggesting that we don't have any such users currently, at least for the 70 .config/arch combinations that was built. Should any turn up, make sure they use the out-of-line versions, which do handle nbits==0 correctly. This is of course not the most efficient, but it's much less churn than teaching all the static inlines an "if (zero_const_nbits())", and since we don't have any current instances, this doesn't affect existing code at all. [1] lkml.kernel.org/r/20180815085539.27485-1-linux@rasmusvillemoes.dk Link: http://lkml.kernel.org/r/20180818131623.8755-3-linux@rasmusvillemoes.dkSigned-off-by:
-
Anton Ivanov authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 917e2fd2 ] This fixes a long standing bug where large amounts of output could freeze the tty (most commonly seen on stdio console). While the bug has always been there it became more pronounced after moving to the new interrupt controller. The line semantics are now changed to have true IRQ write semantics which should further improve the tty/line subsystem stability and performance Signed-off-by:
Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Dave Chinner authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 64081362 ] We've recently seen a workload on XFS filesystems with a repeatable deadlock between background writeback and a multi-process application doing concurrent writes and fsyncs to a small range of a file. range_cyclic writeback Process 1 Process 2 xfs_vm_writepages write_cache_pages writeback_index = 2 cycled = 0 .... find page 2 dirty lock Page 2 ->writepage page 2 writeback page 2 clean page 2 added to bio no more pages write() locks page 1 dirties page 1 locks page 2 dirties page 1 fsync() .... xfs_vm_writepages write_cache_pages start index 0 find page 1 towrite lock Page 1 ->writepage page 1 writeback page 1 clean page 1 added to bio find page 2 towrite lock Page 2 page 2 is writeback <blocks> write() locks page 1 dirties page 1 fsync() .... xfs_vm_writepages write_cache_pages start index 0 !done && !cycled sets index to 0, restarts lookup find page 1 dirty find page 1 towrite lock Page 1 page 1 is writeback <blocks> lock Page 1 <blocks> DEADLOCK because: - process 1 needs page 2 writeback to complete to make enough progress to issue IO pending for page 1 - writeback needs page 1 writeback to complete so process 2 can progress and unlock the page it is blocked on, then it can issue the IO pending for page 2 - process 2 can't make progress until process 1 issues IO for page 1 The underlying cause of the problem here is that range_cyclic writeback is processing pages in descending index order as we hold higher index pages in a structure controlled from above write_cache_pages(). The write_cache_pages() caller needs to be able to submit these pages for IO before write_cache_pages restarts writeback at mapping index 0 to avoid wcp inverting the page lock/writeback wait order. generic_writepages() is not susceptible to this bug as it has no private context held across write_cache_pages() - filesystems using this infrastructure always submit pages in ->writepage immediately and so there is no problem with range_cyclic going back to mapping index 0. However: mpage_writepages() has a private bio context, exofs_writepages() has page_collect fuse_writepages() has fuse_fill_wb_data nfs_writepages() has nfs_pageio_descriptor xfs_vm_writepages() has xfs_writepage_ctx All of these ->writepages implementations can hold pages under writeback in their private structures until write_cache_pages() returns, and hence they are all susceptible to this deadlock. Also worth noting is that ext4 has it's own bastardised version of write_cache_pages() and so it /may/ have an equivalent deadlock. I looked at the code long enough to understand that it has a similar retry loop for range_cyclic writeback reaching the end of the file and then promptly ran away before my eyes bled too much. I'll leave it for the ext4 developers to determine if their code is actually has this deadlock and how to fix it if it has. There's a few ways I can see avoid this deadlock. There's probably more, but these are the first I've though of: 1. get rid of range_cyclic altogether 2. range_cyclic always stops at EOF, and we start again from writeback index 0 on the next call into write_cache_pages() 2a. wcp also returns EAGAIN to ->writepages implementations to indicate range cyclic has hit EOF. writepages implementations can then flush the current context and call wpc again to continue. i.e. lift the retry into the ->writepages implementation 3. range_cyclic uses trylock_page() rather than lock_page(), and it skips pages it can't lock without blocking. It will already do this for pages under writeback, so this seems like a no-brainer 3a. all non-WB_SYNC_ALL writeback uses trylock_page() to avoid blocking as per pages under writeback. I don't think #1 is an option - range_cyclic prevents frequently dirtied lower file offset from starving background writeback of rarely touched higher file offsets. #2 is simple, and I don't think it will have any impact on performance as going back to the start of the file implies an immediate seek. We'll have exactly the same number of seeks if we switch writeback to another inode, and then come back to this one later and restart from index 0. #2a is pretty much "status quo without the deadlock". Moving the retry loop up into the wcp caller means we can issue IO on the pending pages before calling wcp again, and so avoid locking or waiting on pages in the wrong order. I'm not convinced we need to do this given that we get the same thing from #2 on the next writeback call from the writeback infrastructure. #3 is really just a band-aid - it doesn't fix the access/wait inversion problem, just prevents it from becoming a deadlock situation. I'd prefer we fix the inversion, not sweep it under the carpet like this. #3a is really an optimisation that just so happens to include the band-aid fix of #3. So it seems that the simplest way to fix this issue is to implement solution #2 Link: http://lkml.kernel.org/r/20181005054526.21507-1-david@fromorbit.comSigned-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Jan Kara <jack@suse.de> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 99986576 ] The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] get_zeroed_page(GFP_NOFS) fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 255: __dlm_put_mle in dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 254: spin_lock in dlm_put_ml [FUNC] get_zeroed_page(GFP_NOFS) fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 222: __dlm_put_mle in dlm_put_mle_inuse fs/ocfs2/dlm/dlmmaster.c, 219: spin_lock in dlm_put_mle_inuse To fix this bug, GFP_NOFS is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Link: http://lkml.kernel.org/r/20180901112528.27025-1-baijiaju1990@gmail.comSigned-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
-
David S. Miller authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 6c2fc9cd ] Such as: fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’: ./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value] #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) and drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’: ./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value] #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 3a313862 ] On r8a7791/koelsch, sometimes the following message is printed during system suspend: rcar_thermal e61f0000.thermal: thermal sensor was broken This happens if the workqueue runs while the device is already suspended. Fix this by using the freezable system workqueue instead, cfr. commit 51e20d0e ("thermal: Prevent polling from happening during system suspend"). Fixes: e0a5172e ("thermal: rcar: add interrupt support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 2452c96e ] Test $comm in kprobe-event argument syntax testcase only if it is supported on the kernel because $comm has been introduced 4.8 kernel. So on older stable kernel, it should be skipped. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit efddff27 ] IRQ wake up support for MAX8997 driver was initially configured by respective property in pdata. However, after the driver conversion to device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD drivers initialized from device-tree assume that they can be an irq wakeup source, so enable it also for MAX8997. This fixes support for wakeup from MAX8997 RTC alarm. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Fabio Estevam authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 55143439 ] When trying to read any MC13892 ADC channel on a imx51-babbage board: The MC13892 PMIC shutdowns completely. After debugging this issue and comparing the MC13892 and MC13783 initializations done in the vendor kernel, it was noticed that the CHRGRAWDIV bit of the ADC0 register was not being set. This bit is set by default after power on, but the driver was clearing it. After setting this bit it is possible to read the ADC values correctly. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit c94f026f ] These functions are supposed to return one on failure and zero on success. Returning a zero here could cause uninitialized variable bugs in several of the callers. For example: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority() error: uninitialized symbol 'caps'. Fixes: 48365e48 ("qlcnic: dcb: Add support for CEE Netlink interface.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit aeb5e02a ] Clang warns (trimmed for brevity): drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value to switch condition type (2147764552 to 18446744071562348872) [-Wswitch] case IMHOLD_L1: ^ drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value to switch condition type (2147764550 to 18446744071562348870) [-Wswitch] case IMCLEAR_L2: ^ 2 warnings generated. The root cause is that the _IOC macro can generate really large numbers, which don't find into type int. My research into how GCC and Clang are handling this at a low level didn't prove fruitful and surveying the kernel tree shows that aside from here and a few places in the scsi subsystem, everything that uses _IOC is at least of type 'unsigned int'. Make that change here because as nothing in this function cares about the signedness of the variable and it removes ambiguity, which is never good when dealing with compilers. While we're here, remove the unnecessary local variable ret (just return -EINVAL and 0 directly). Link: https://github.com/ClangBuiltLinux/linux/issues/67Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit ef0f02fd ] Clang warns: drivers/rtc/rtc-s35390a.c:124:27: warning: implicit conversion from 'int' to 'char' changes value from 192 to -64 [-Wconstant-conversion] buf = S35390A_FLAG_RESET | S35390A_FLAG_24H; ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~ 1 warning generated. Update buf to be an unsigned 8-bit integer, which matches the buf member in struct i2c_msg. https://github.com/ClangBuiltLinux/linux/issues/145Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Yan, Zheng authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit c58f450b ] Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
David S. Miller authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 46b83064 ] If PARPORT_PC_FIFO is not enabled, do not provide the dma lock macros and lock definition. Otherwise: ./arch/sparc/include/asm/parport.h:24:24: warning: ‘dma_spin_lock’ defined but not used [-Wunused-variable] static DEFINE_SPINLOCK(dma_spin_lock); ^~~~~~~~~~~~~ ./include/linux/spinlock_types.h:81:39: note: in definition of macro ‘DEFINE_SPINLOCK’ #define DEFINE_SPINLOCK(x) spinlock_t x = __SPIN_LOCK_UNLOCKED(x) Signed-off-by:
-
Vignesh R authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit b682cffa ] McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to configuration FIFO watermark level for DMA trigger to be GCD of transfer length and max FIFO size which would mean trigger level may be set to 32 for transmit-receive mode if length is aligned. This does not work in case of SPI slave mode where FIFO always needs to have data ready whenever master starts the clock. With DMA trigger size of 32 there will be a small window during slave TX where DMA is still putting data into FIFO but master would have started clock for next byte, resulting in shifting out of stale data. Similarly, on Slave RX side there may be RX FIFO overflow Fix this by setting FIFO watermark for DMA trigger to word length. This means DMA is triggered as soon as FIFO has space for word length bytes and DMA would make sure FIFO is almost always full therefore improving FIFO occupancy in both master and slave mode. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit ec0c0bb4 ] Return an error when the function debug_register() fails allocating the debug handle. Also remove the registered debug handle when the initialization fails later on. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 64b9d16e ] Clang warns: drivers/atm/zatm.c:513:7: error: while loop has empty body [-Werror,-Wempty-body] zwait; ^ drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to silence this warning Get rid of this warning by using an empty do-while loop. While we're at it, add parentheses to make it clear that this is a function-like macro. Link: https://github.com/ClangBuiltLinux/linux/issues/42Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Trond Myklebust authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit e732f448 ] Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Mattias Jacobsson authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 09015855 ] Upon success the update_status handler returns a positive number corresponding to the number of bytes transferred by usb_control_msg. However the return code of the update_status handler should indicate if an error occurred(negative) or how many bytes of the user's input to sysfs that was consumed. Return code zero indicates all bytes were consumed. The bug can for example result in the update_status handler being called twice, the second time with only the "unconsumed" part of the user's input to sysfs. Effectively setting an incorrect brightness. Change the update_status handler to return zero for all successful transactions and forward usb_control_msg's error code upon failure. Signed-off-by:
Mattias Jacobsson <2pi@mok.nu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit fc0c8b36 ] There's some antiquated debug output that's trying to do a hand-made hexdump and turning into horrible 1-byte-per-line output these days. Use print_hex_dump() instead Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Philipp Klocke authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit eb7ebfa3 ] Compiling with clang yields the following warning: sound/i2c/cs8427.c:140:31: warning: implicit conversion from 'int' to 'char' changes value from 160 to -96 [-Wconstant-conversion] data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF; ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ Because CS8427_REG_AUTOINC is defined as 128, it is too big for a char field. So change data from char to unsigned char, that it can hold the value. This patch does not change the generated code. Signed-off-by:
Philipp Klocke <philipp97kl@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Steven Rostedt (VMware) authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit c2712b85 ] Andy had some concerns about using regs_get_kernel_stack_nth() in a new function regs_get_kernel_argument() as if there's any error in the stack code, it could cause a bad memory access. To be on the safe side, call probe_kernel_read() on the stack address to be extra careful in accessing the memory. A helper function, regs_get_kernel_stack_nth_addr(), was added to just return the stack address (or NULL if not on the stack), that will be used to find the address (and could be used by other functions) and read the address with kernel_probe_read(). Requested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181017165951.09119177@gandalf.local.homeSigned-off-by:
-
Kyeongdon Kim authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 33c4368e ] This fixes the "'hash' may be used uninitialized in this function" net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized] addr->hash = hash ^ sk->sk_type; Signed-off-by:
Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by:
-
Christoph Hellwig authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 6c404a68 ] We need to transfer device ownership to the CPU before we can manipulate the mapped data. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
