- 13 Jun, 2017 8 commits
-
-
Vivien Didelot authored
For implicit namespacing and clarity, prefix the common Port Default VLAN Register macros with MV88E6XXX_PORT_DEFAULT_VLAN. Document the register and prefer ordered hex masks values for all Marvell 16-bit registers. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
For implicit namespacing and clarity, prefix the common Port Based VLAN Register macros with MV88E6XXX_PORT_BASE_VLAN. Document the register and prefer ordered hex masks values for all Marvell 16-bit registers. Signed-off-by:
-
Vivien Didelot authored
For implicit namespacing and clarity, prefix the common Port Control 1 Register macros with MV88E6XXX_PORT_CTL1. Document the register and prefer ordered hex masks values for all Marvell 16-bit registers. Signed-off-by:
-
Vivien Didelot authored
For implicit namespacing and clarity, prefix the common Port Control Register macros with MV88E6XXX_PORT_CTL0 and the ones which differ between implementations with a chosen reference model (e.g. MV88E6185_PORT_CTL0_USE_TAG.) The reason for CTL0 is to make it clear between the badly named "Port Control", "Port Control 1" and "Port Control 2" registers. Document the register and prefer ordered hex masks values for all Marvell 16-bit registers. Signed-off-by:
-
Vivien Didelot authored
For implicit namespacing and clarity, prefix the common Switch ID Register macros with MV88E6XXX_PORT_SWITCH_ID. Document the register and prefer ordered hex masks values for all Marvell 16-bit registers, this means shifting their values by 4. Signed-off-by:
-
Vivien Didelot authored
For implicit namespacing and clarity, prefix the common Port Jamming Control Register macros with MV88E6XXX_PORT_JAM_CTL and the ones which differ between implementations with a chosen reference model (e.g. MV88E6097_PORT_JAM_CTL.) The 88E6390 family renamed the register to Flow Control and turned it into an indirect table. Document that as well. Document the register and prefer ordered hex masks values for all Marvell 16-bit registers. Signed-off-by:
-
Vivien Didelot authored
For implicit namespacing and clarity, prefix the common MAC Control Register macros with MV88E6XXX_PORT_MAC_CTL and the ones which differ between implementations with a chosen reference model (e.g. MV88E6065_PORT_MAC_CTL_SPEED_200.) Document the register and prefer ordered hex masks values for all Marvell 16-bit registers. Signed-off-by:
-
Vivien Didelot authored
For implicit namespacing and clarity, prefix the common Port Status Register macros with MV88E6XXX_PORT_STS and the ones which differ between implementations with a chosen reference model (e.g. MV88E6352_PORT_STS_EEE.) Document the register and prefer ordered hex masks values for all Marvell 16-bit registers. Signed-off-by:
-
- 12 Jun, 2017 8 commits
-
-
Thomas Bogendoerfer authored
Give back all modes advertised by the link partner. This change brings the marvell phy driver in line with all other phy drivers. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Roopa Prabhu authored
This patch fixes vxlan_snoop to not move permanent fdb entries on learn events. This is consistent with the bridge fdb handling of permanent entries. Fixes: 26a41ae6 ("vxlan: only migrate dynamic FDB entries") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.13 The first pull request for 4.13. We have a new driver qtnfmac, but also rsi driver got a support for new firmware and supporting ath10k SDIO devices was started. Major changes: ath10k * add initial SDIO support (still work in progress) rsi * new loading for the new firmware version rtlwifi * final patches for the new btcoex support rt2x00 * add device ID for Epson WN7512BEP qtnfmac * new driver for Quantenna QSR10G chipsets ==================== Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== udp: reduce cache pressure In the most common use case, many skb fields are not used by recvmsg(), and the few ones actually accessed lays on cold cachelines, which leads to several cache miss per packet. This patch series attempts to reduce such misses with different strategies: * caching the interesting fields in the scratched space * avoid accessing at all uninteresting fields * prefetching Tested using the udp_sink program by Jesper[1] as the receiver, an h/w l4 rx hash on the ingress nic, so that the number of ingress nic rx queues hit by the udp traffic could be controlled via ethtool -L. The udp_sink program was bound to the first idle cpu, to get more stable numbers. On a single numa node receiver: nic rx queues vanilla patched kernel delta 1 1850 kpps 1850 kpps 0% 2 2370 kpps 2700 kpps 13.9% 16 2000 kpps 2220 kpps 11% [1] https://github.com/netoptimizer/network-testing/blob/master/src/udp_sink.c v1 -> v2: - replaced secpath_reset() with skb_release_head_state() - changed udp_dev_scratch fields types to u{32,16} variant, replaced bitfield with bool v2 -> v3: - no changes, tested against apachebench for performances regression ==================== Signed-off-by:
-
Paolo Abeni authored
when udp_recvmsg() is executed, on x86_64 and other archs, most skb fields are on cold cachelines. If the skb are linear and the kernel don't need to compute the udp csum, only a handful of skb fields are required by udp_recvmsg(). Since we already use skb->dev_scratch to cache hot data, and there are 32 bits unused on 64 bit archs, use such field to cache as much data as we can, and try to prefetch on dequeue the relevant fields that are left out. This can save up to 2 cache miss per packet. v1 -> v2: - changed udp_dev_scratch fields types to u{32,16} variant, replaced bitfiled with bool Signed-off-by:Paolo Abeni <pabeni@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Paolo Abeni authored
Since UDP no more uses sk->destructor, we can clear completely the skb head state before enqueuing. Amend and use skb_release_head_state() for that. All head states share a single cacheline, which is not normally used/accesses on dequeue. We can avoid entirely accessing such cacheline implementing and using in the UDP code a specialized skb free helper which ignores the skb head state. This saves a cacheline miss at skb deallocation time. v1 -> v2: replaced secpath_reset() with skb_release_head_state() Signed-off-by:
-
Paolo Abeni authored
The same code is replicated in 3 different places; move it to a common helper. Signed-off-by:
-
Niklas Söderlund authored
The hardware supports the MTU to be changed and the driver it self is somewhat prepared to support this. This patch hooks up the callbacks to be able to change the MTU from user-space. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
- 11 Jun, 2017 4 commits
-
-
Daniel Borkmann authored
Make use of recently implemented stack_depth tracking for arm64 JIT, so that stack usage can be reduced heavily for programs not using tail calls at least. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2017-06-11 This series provides updates to mlx5 header rewrite feature, from Or Gerlitz. and three more small updates From maor and eran. ------- Or says: Packets belonging to flows which are different by matching may still need to go through the same header re-writes (e.g set the current routing hop MACs and issue TTL decrement). To minimize the number of modify header IDs, we add a cache for header re-write IDs which is keyed by the binary chain of modify header actions. The caching is supported for both eswitch and NIC use-cases, where the actual conversion of the code to use caching comes in separate patches, one per use-case. Using a per field mask field, the TC pedit action supports modifying partial fields. The last patch enables offloading that. ------- From Maor, update flow table commands layout to the latest HW spec. From Eran, ethtool connector type reporting updates. ==================== Signed-off-by: -
Grygorii Strashko authored
CPSW driver does not handle this interrupt, so there are no reasons to enable it in hardware. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Grygorii Strashko authored
CPSW driver supports PTP v1 messages, but for unknown reasons this filter is not advertised. As result, ./tools/testing/selftests/networking/timestamping/timestamping utility can't be used for testing of CPSW RX timestamping with option SOF_TIMESTAMPING_RX_HARDWARE, because it uses HWTSTAMP_FILTER_PTP_V1_L4_SYNC filter. Hence, fix it by advertising HWTSTAMP_FILTER_PTP_V1_L4_XXX filters in CPSW driver. Signed-off-by:
-
- 10 Jun, 2017 19 commits
-
-
David S. Miller authored
Daniel Borkmann says: ==================== Misc BPF updates This set contains a couple of misc updates: stack usage reduction for perf_sample_data in tracing progs, reduction of stale data in verifier on register state transitions that I still had in my queue and few selftest improvements as well as bpf_set_hash() helper for tc programs. ==================== Signed-off-by: -
Daniel Borkmann authored
Allow for tc BPF programs to set a skb->hash, apart from clearing and triggering a recalc that we have right now. It allows for BPF to implement a custom hashing routine for skb_get_hash(). Signed-off-by:
-
Daniel Borkmann authored
Since cg_skb_func_proto() doesn't do anything else than just calling into sk_filter_func_proto(), remove it and set sk_filter_func_proto() directly for .get_func_proto callback. Signed-off-by:
-
Daniel Borkmann authored
When running all the tests, through 'make run_tests', I had test_align failing due to insufficient rlimit. Set it the same way as all other test cases from BPF selftests do, so that test case properly loads everything. [...] Summary: 7 PASSED, 1 FAILED selftests: test_progs [PASS] /home/foo/net-next/tools/testing/selftests/bpf Test 0: mov ... Failed to load program. FAIL Test 1: shift ... Failed to load program. FAIL Test 2: addsub ... Failed to load program. FAIL Test 3: mul ... Failed to load program. FAIL Test 4: unknown shift ... Failed to load program. FAIL Test 5: unknown mul ... Failed to load program. FAIL Test 6: packet const offset ... Failed to load program. FAIL Test 7: packet variable offset ... Failed to load program. FAIL Results: 0 pass 8 fail selftests: test_align [PASS] [...] Signed-off-by:
-
Daniel Borkmann authored
Add a test case to track behaviour when traversing and updating the htab map. We recently used such traversal, so it's quite useful to keep it as an example in selftests. Signed-off-by:
-
Daniel Borkmann authored
Right now, we don't reset the id of spilled registers in case of clear_all_pkt_pointers(). Given pkt_pointers are highly likely to contain an id, do so by reusing __mark_reg_unknown_value(). Signed-off-by:
-
Daniel Borkmann authored
Whenever we set the register to the type CONST_IMM, we currently don't reset the id to 0. id member is not used in CONST_IMM case, so don't let it become stale, where pruning won't be able to match later on. Signed-off-by:
-
Daniel Borkmann authored
spilled_regs[] state is only used for stack slots of type STACK_SPILL, never for STACK_MISC. Right now, in states_equal(), even if we have old and current stack state of type STACK_MISC, we compare spilled_regs[] for that particular offset. Just skip these like we do everywhere else. Signed-off-by:
-
Daniel Borkmann authored
perf_sample_data consumes 386 bytes on stack, reduce excessive stack usage and move it to per cpu buffer. It's allowed due to preemption being disabled for tracing, xdp and tc programs, thus at all times only one program can run on a specific CPU and programs cannot run from interrupt. We similarly also handle bpf_pt_regs. Signed-off-by:
-
Fabio Estevam authored
Commit 2b30842b ("net: fec: Clear and enable MIB counters on imx51") introduced fec_enet_clear_ethtool_stats(), but missed to add a stub for the CONFIG_M5272=y case, causing build failure for the m5272c3_defconfig. Add the missing empty stub to fix the build failure. Fixes: Commit 2b30842b ("net: fec: Clear and enable MIB counters on imx51") Reported-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Chenbo Feng authored
After moves the skb->dev and skb->protocol initialization into ip6_output, setting the skb->dev inside ip6_fragment is unnecessary. Fixes: 97a7a37a("ipv6: Initial skb->dev and skb->protocol in ip6_output") Signed-off-by:
Chenbo Feng <fengc@google.com> Signed-off-by:
-
Xin Long authored
sctp_assoc_set_id does the assoc id check in the beginning when processing dupcookie, no need to do the same check before calling it. v1->v2: fix some typo errs Marcelo pointed in changelog. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to use read_lock_bh instead of local_bh_disable and read_lock in sctp_eps_seq_show. Signed-off-by:
-
Xin Long authored
Dmitry got the following recursive locking report while running syzkaller fuzzer, the Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:52 print_deadlock_bug kernel/locking/lockdep.c:1729 [inline] check_deadlock kernel/locking/lockdep.c:1773 [inline] validate_chain kernel/locking/lockdep.c:2251 [inline] __lock_acquire+0xef2/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 lock_sock_nested+0xcb/0x120 net/core/sock.c:2536 lock_sock include/net/sock.h:1460 [inline] sctp_close+0xcd/0x9d0 net/sctp/socket.c:1497 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432 sock_release+0x8d/0x1e0 net/socket.c:597 __sock_create+0x38b/0x870 net/socket.c:1226 sock_create+0x7f/0xa0 net/socket.c:1237 sctp_do_peeloff+0x1a2/0x440 net/sctp/socket.c:4879 sctp_getsockopt_peeloff net/sctp/socket.c:4914 [inline] sctp_getsockopt+0x111a/0x67e0 net/sctp/socket.c:6628 sock_common_getsockopt+0x95/0xd0 net/core/sock.c:2690 SYSC_getsockopt net/socket.c:1817 [inline] SyS_getsockopt+0x240/0x380 net/socket.c:1799 entry_SYSCALL_64_fastpath+0x1f/0xc2 This warning is caused by the lock held by sctp_getsockopt() is on one socket, while the other lock that sctp_close() is getting later is on the newly created (which failed) socket during peeloff operation. This patch is to avoid this warning by use lock_sock with subclass SINGLE_DEPTH_NESTING as Wang Cong and Marcelo's suggestion. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Rosen, Rami authored
This patch removes unneeded forward declaration of tpacket_snd() in net/packet/af_packet.c. Signed-off-by:
Rami Rosen <rami.rosen@intel.com> Signed-off-by:
-
Chenbo Feng authored
There are two tcp_filter hooks in tcp_ipv6 ingress path currently. One is at tcp_v6_rcv and another is in tcp_v6_do_rcv. It seems the tcp_filter() call inside tcp_v6_do_rcv is redundent and some packet will be filtered twice in this situation. This will cause trouble when using eBPF filters to account traffic data. Signed-off-by:
-
Nicolas Dichtel authored
Goal is to advertise the user when ethtool speeds and 802.3ad speeds are desynchronized. When this case happens, the kernel needs to be patched. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Nicolas Dichtel authored
When the user tries to assign a specific nsid, idr_alloc() is called with the range [nsid, nsid+1]. If this nsid is already used, idr_alloc() returns ENOSPC (No space left on device). In our case, it's better to return EEXIST to make it clear that the nsid is not available. CC: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Nicolas Dichtel authored
It helps the user to identify errors. CC: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
- 09 Jun, 2017 1 commit
-
-
Ganesh Goudar authored
Free up mbox_log allocated for PF0 to PF3. Fixes: 7829451c ("cxgb4: Add control net_device for configuring PCIe VF") Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
