- 28 Apr, 2010 16 commits
-
-
Steve Hodgson authored
Fix a regression introduced in d3245b28 "sfc: Refactor link configuration". Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Steve Hodgson authored
The aim of this code was to avoid a spurious XGMII fault over a MAC reconfigure. It's less relevant now that the PHY reconfigure isn't called from the MAC reconfigure. After applying this patch, our link stress test passed 48 hours of testing without ever resetting the PHY. Signed-off-by:
-
Steve Hodgson authored
'Fatal' errors set an interrupt flag associated with a specific event queue; only read the syndrome vector if we see that queue's flag set (legacy interrupts) or in the interrupt handler for that queue (MSI). Do not ignore an interrupt if the fatal error flag is set but specific error flags are all zero. Even if we don't schedule a reset, we must respect the queue mask and rearm the appropriate event queues. Signed-off-by:
-
Ben Hutchings authored
In some cases failing functions were returning 0 which is obviously wrong. In other cases they were returning inappropriate error codes. Signed-off-by:
-
Steve Hodgson authored
Siena has a separate SRAM bank for each port. On single-port boards these can be merged together, so each port has an interrupt flag for parity errors in the other port's SRAM. Currently we do not enable such merging and should mask this interrupt source. Signed-off-by:
-
FUJITA Tomonori authored
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Eric Dumazet authored
1) Even on 64bit arches, sizeof(struct sk_buff) < 256 2) No need to prefetch same pointer twice. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Eilon Greenstein <eilong@broadcom.com> Acked-by:
Eliezer Tamir <eliezer@tamir.org.il> Signed-off-by:
-
Nicholas Nunley authored
Due to an errata in 82598 parts MSI-X needs to be disabled in certain ixgbe devices designed to transfer peer-to-peer traffic on the PCIe bus. This patch sets the default interrupt type to MSI rather than MSI-X for specific Cisco ixgbe adapters. Signed-off-by:
Nicholas Nunley <nicholasx.d.nunley@intel.com> Acked-by:
John Ronciak <john.ronciak@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
stephen hemminger authored
Move some declarations around to make it clearer which variables are being used inside loop. Signed-off-by:
-
stephen hemminger authored
The recently introduced bridge mulitcast port group list was only partially using RCU correctly. It was missing rcu_dereference() and missing the necessary barrier on deletion. The code should have used one of the standard list methods (list or hlist) instead of open coding a RCU based link list. Signed-off-by:
-
stephen hemminger authored
Fix unsafe usage of RCU. Would never work on Alpha SMP because of lack of rcu_dereference() Signed-off-by:
-
stephen hemminger authored
By coding slightly differently, there are only two cases to deal with: add at head and add after previous entry. Signed-off-by:
-
Taku Izumi authored
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by:
Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by:
Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by:
-
Taku Izumi authored
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by:
-
Taku Izumi authored
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by:
-
Emil Tantilov authored
This patch is an alternative to similar patch provided by Joe Perches. Substitute DPRINTK macro for e_<level> that uses netdev_<level> and dev_<level> similar to e1000e. - Convert printk to pr_<level> where applicable. - Use common #define pr_fmt for the driver. - Use dev_<level> for displaying text in parts of the driver where the interface name is not assigned (like e1000_param.c). - Better align test with the new macros. CC: Joe Perches <joe@perches.com> Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by:
-
- 27 Apr, 2010 24 commits
-
-
David S. Miller authored
This reverts commit ff65e827. As explained by Stephen Hemminger, the traversal doesn't require RCU handling as we hold a lock. The list addition et al. calls, on the other hand, do. Signed-off-by:
-
Nick Nunley authored
Signed-off-by:
-
Nick Nunley authored
Signed-off-by:
-
Nick Nunley authored
Signed-off-by:
-
Nick Nunley authored
Signed-off-by:
-
Alexander Duyck authored
This patch makes it so that igb now uses the DMA API functions instead of the PCI API functions. To do this the pci_dev pointer that was in the rings has been replaced with a device pointer, and as a result all references to [tr]x_ring->pdev have been replaced with [tr]x_ring->dev. This patch is based of of work originally done by Nicholas Nunley. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Nick Nunley authored
Signed-off-by:
-
Nick Nunley authored
Signed-off-by:
-
David S. Miller authored
Noticed by Michał Mirosław. Signed-off-by: -
Dimitris Michailidis authored
Implement the ->set_flags ethtool method to control NETIF_F_RXHASH and set skb->rxhash to the HW calculated hash accordingly. Follow Eric Dumazet's suggestion and use the hash value raw. Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
doing it within the driver does not look good. And surely isn't how platform devices were meat to be used. Acked-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by:
-
Sebastian Andrzej Siewior authored
CONFIG_SIBYTE_STANDALONE is gone since v2.6.31-rc1 ("MIPS: Sibyte: Remove standalone kernel support") This is a missing piece. Signed-off-by: -
Jiri Pirko authored
Now there's no need to use this fuction directly because it's handled by register_pernet_device. So to make this simple and easy to understand, make this static to do not tempt potentional users. Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
Dimitris Michailidis authored
Some boards have longer serial numbers in their VPD, up to 24 bytes. Signed-off-by:
-
Dimitris Michailidis authored
Some boards' VPDs contain additional keywords or have longer serial numbers, meaning the keyword locations are variable. Ditch the static layout and use the pci_vpd_* family of functions to parse the VPD instead. Signed-off-by:
-
Eric Dumazet authored
Current socket backlog limit is not enough to really stop DDOS attacks, because user thread spend many time to process a full backlog each round, and user might crazy spin on socket lock. We should add backlog size and receive_queue size (aka rmem_alloc) to pace writers, and let user run without being slow down too much. Introduce a sk_rcvqueues_full() helper, to avoid taking socket lock in stress situations. Under huge stress from a multiqueue/RPS enabled NIC, a single flow udp receiver can now process ~200.000 pps (instead of ~100 pps before the patch) on a 8 core machine. Signed-off-by:
-
Changli Gao authored
batch skb dequeueing from softnet input_pkt_queue to reduce potential lock contention when RPS is enabled. Note: in the worst case, the number of packets in a softnet_data may be double of netdev_max_backlog. Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Signed-off-by:
-
David S. Miller authored
Idea from Eric Dumazet. As for placement inside of struct sock, I tried to choose a place that otherwise has a 32-bit hole on 64-bit systems. Signed-off-by:
-
Anjali Singhai authored
Description: When using Intel smartspeed, the patch displays a warning when the link down shifts to 1 Gig. Signed-off-by:
Anjali Singhai <anjali.singhai@intel.com> Signed-off-by:
-
Don Skidmore authored
The way we were setting autoneg via ethtool was inconstant with that of our other drivers. It will change the following: If autoneg is off: >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Before: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Now: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: on RX: on TX: on Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by:
-
Greg Rose authored
The ixgbevf driver would always report 10Gig speeds even when the link speed is downshifted to 1Gig. This patch fixes that problem. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
Changli Gao authored
reimplement softnet_data.output_queue as a FIFO queue to keep the fairness among the qdiscs rescheduled. Signed-off-by:
-
-
Joe Perches authored
Convert DEBUGOUTx to pr_debug Convert DEBUGFUNC to more commonly used ENTER Convert mac address output to %pM Use #define pr_fmt Convert a few printks to pr_<level> Improve ixgb_mc_addr_list_update: use a temporary for current mc address Use etherdevice.h functions for mac address testing Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
