- 01 Feb, 2020 14 commits
-
-
Lubomir Rintel authored
commit ef9ffc1e upstream. The match data does not have to be a struct device pointer, and indeed very often is not. Attempt to treat it as such easily results in a crash. For the components that are not registered, we don't know which device is missing. Once it it is there, we can use the struct component to get the device and whether it's bound or not. Fixes: 59e73854 ('component: add debugfs support') Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Cc: stable <stable@vger.kernel.org> Cc: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20191118115431.63626-1-lkundrak@v3.skSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Wunner authored
commit dc76697d upstream. Unbinding the bcm2835aux UART driver raises the following error if the maximum number of 8250 UARTs is set to 1 (via the 8250.nr_uarts module parameter or CONFIG_SERIAL_8250_RUNTIME_UARTS): (NULL device *): Removing wrong port: a6f80333 != fa20408b That's because bcm2835aux_serial_probe() retrieves UART line number 1 from the devicetree and stores it in data->uart.port.line, while serial8250_register_8250_port() instead uses UART line number 0, which is stored in data->line. On driver unbind, bcm2835aux_serial_remove() uses data->uart.port.line, which contains the wrong number. Fix it. The issue does not occur if the maximum number of 8250 UARTs is >= 2. Fixes: bdc5f300 ("serial: bcm2835: add driver for bcm2835-aux-uart") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.6+ Cc: Martin Sperl <kernel@martin.sperl.org> Reviewed-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by:
-
Malcolm Priestley authored
commit 9dd631fa upstream. The driver reporting IEEE80211_TX_STAT_ACK is not being handled correctly. The driver should only report on TSR_TMO flag is not set indicating no transmission errors and when not IEEE80211_TX_CTL_NO_ACK is being requested. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/340f1f7f-c310-dca5-476f-abc059b9cd97@gmail.comSigned-off-by:
-
Malcolm Priestley authored
commit d579c43c upstream. It appears that the drivers does not go into power save correctly the NULL data packets are not being transmitted because it not enabled in mac80211. The driver needs to capture ieee80211_is_nullfunc headers and copy the duration_id to it's own duration data header. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit d971fdd3 upstream. It appears that the driver still transmits in CTS protect mode even though it is not enabled in mac80211. That is both packet types PK_TYPE_11GA and PK_TYPE_11GB both use CTS protect. The only difference between them GA does not use B rates. Find if only B rate in GB or GA in protect mode otherwise transmit packets as PK_TYPE_11A. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Colin Ian King authored
commit 4cc41cbc upstream. Currently when the call to prism2sta_ifst fails a netdev_err error is reported, error return variable result is set to -1 but the function always returns 0 for success. Fix this by returning the error value in variable result rather than 0. Addresses-Coverity: ("Unused value") Fixes: 00b3ed16 ("Staging: add wlan-ng prism2 usb driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200114181604.390235-1-colin.king@canonical.comSigned-off-by:
-
Andrey Shvetsov authored
commit 4d1356ac upstream. If the length of the socket buffer is 0xFFFFFFFF (max size for an unsigned int), then payload_len becomes 0xFFFFFFF1 after subtracting 14 (ETH_HLEN). Then, mdp_len is set to payload_len + 16 (MDP_HDR_LEN) which overflows and results in a value of 2. These values for payload_len and mdp_len will pass current buffer size checks. This patch checks if derived from skb->len sum may overflow. The check is based on the following idea: For any `unsigned V1, V2` and derived `unsigned SUM = V1 + V2`, `V1 + V2` overflows iif `SUM < V1`. Reported-by:
Andrey Shvetsov <andrey.shvetsov@k2l.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200116172238.6046-1-andrey.shvetsov@microchip.comSigned-off-by:
-
Bin Liu authored
commit 09ed259f upstream. VBUS should be turned off when leaving the host mode. Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to turn off VBUS power. Fixes: 5f94adfe ("usb: dwc3: core: refactor mode initialization to its own function") Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 38c0d5bd upstream. Commit f4a4cbb2 ("USB: ir-usb: reimplement using generic framework") switched to using the generic write implementation which may combine multiple write requests into larger transfers. This can break the IrLAP protocol where end-of-frame is determined using the USB short packet mechanism, for example, if multiple frames are sent in rapid succession. Fixes: f4a4cbb2 ("USB: ir-usb: reimplement using generic framework") Cc: stable <stable@vger.kernel.org> # 2.6.35 Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 17a0184c upstream. Commit e0d795e4 ("usb: irda: cleanup on ir-usb module") added a USB IrDA header with common defines, but mistakingly switched to using the class-descriptor baud-rate bitmask values for the outbound header. This broke link-speed handling for rates above 9600 baud, but a device would also be able to operate at the default 9600 baud until a link-speed request was issued (e.g. using the TCGETS ioctl). Fixes: e0d795e4 ("usb: irda: cleanup on ir-usb module") Cc: stable <stable@vger.kernel.org> # 2.6.27 Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by:
-
Johan Hovold authored
commit 2988a8ae upstream. Add missing endpoint sanity check to avoid dereferencing a NULL-pointer on open() in case a device lacks a bulk-out endpoint. Note that prior to commit f4a4cbb2 ("USB: ir-usb: reimplement using generic framework") the oops would instead happen on open() if the device lacked a bulk-in endpoint and on write() if it lacked a bulk-out endpoint. Fixes: f4a4cbb2 ("USB: ir-usb: reimplement using generic framework") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by:
-
Heikki Krogerus authored
commit f5ae8869 upstream. There is one more Comet Lake PCH variant, CML-V, that has its own PCI ID. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200117093033.48616-1-heikki.krogerus@linux.intel.comSigned-off-by:
-
Johan Hovold authored
commit 3139b180 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: dad0d04f ("rsi: Add RS9113 wireless driver") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: Fariya Fatima <fariyaf@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Johan Hovold authored
commit b73e05aa upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 9afac70a ("orinoco: add orinoco_usb driver") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by:
-
- 29 Jan, 2020 26 commits
-
-
Greg Kroah-Hartman authored
-
David Hildenbrand authored
commit feee6b29 upstream. -- snip -- - Missing arm64 hot(un)plug support - Missing some vmem_altmap_offset() cleanups - Missing sub-section hotadd support - Missing unification of mm/hmm.c and kernel/memremap.c -- snip -- We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e8] Signed-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: <stable@vger.kernel.org> [5.0+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
David Hildenbrand authored
commit 2c91f8fc upstream. -- snip -- Only contextual issues: - Unrelated check_and_unmap_cpu_on_node() changes are missing. - Unrelated walk_memory_blocks() has not been moved/refactored yet. -- snip -- try_offline_node() is pretty much broken right now: - The node span is updated when onlining memory, not when adding it. We ignore memory that was mever onlined. Bad. - We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily trigger a kernel panic. Bad for memory that is offline but also bad for subsection hotadd with ZONE_DEVICE, whereby the memmap of the first PFN of a section might contain garbage. - Sections belonging to mixed nodes are not properly considered. As memory blocks might belong to multiple nodes, we would have to walk all pageblocks (or at least subsections) within present sections. However, we don't have a way to identify whether a memmap that is not online was initialized (relevant for ZONE_DEVICE). This makes things more complicated. Luckily, we can piggy pack on the node span and the nid stored in memory blocks. Currently, the node span is grown when calling move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when removing memory, before calling try_offline_node(). Sysfs links are created via link_mem_sections(), e.g., during boot or when adding memory. If the node still spans memory or if any memory block belongs to the nid, we don't set the node offline. As memory blocks that span multiple nodes cannot get offlined, the nid stored in memory blocks is reliable enough (for such online memory blocks, the node still spans the memory). Introduce for_each_memory_block() to efficiently walk all memory blocks. Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span when removing ZONE_DEVICE memory to fix similar issues (access of garbage memmaps) - until we have a reliable way to identify whether these memmaps were properly initialized. This implies later, that once a node had ZONE_DEVICE memory, we won't be able to set a node offline - which should be acceptable. Since commit f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") memory that is added is not assoziated with a zone/node (memmap not initialized). The introducing commit 60a5a19e ("memory-hotplug: remove sysfs file of node") already missed that we could have multiple nodes for a section and that the zone/node span is updated when onlining pages, not when adding them. I tested this by hotplugging two DIMMs to a memory-less and cpu-less NUMA node. The node is properly onlined when adding the DIMMs. When removing the DIMMs, the node is properly offlined. Masayoshi Mizuma reported: : Without this patch, memory hotplug fails as panic: : : BUG: kernel NULL pointer dereference, address: 0000000000000000 : ... : Call Trace: : remove_memory_block_devices+0x81/0xc0 : try_remove_memory+0xb4/0x130 : __remove_memory+0xa/0x20 : acpi_memory_device_remove+0x84/0x100 : acpi_bus_trim+0x57/0x90 : acpi_bus_trim+0x2e/0x90 : acpi_device_hotplug+0x2b2/0x4d0 : acpi_hotplug_work_fn+0x1a/0x30 : process_one_work+0x171/0x380 : worker_thread+0x49/0x3f0 : kthread+0xf8/0x130 : ret_from_fork+0x35/0x40 [david@redhat.com: v3] Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com Fixes: 60a5a19e ("memory-hotplug: remove sysfs file of node") Fixes: f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e8Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Keith Busch <keith.busch@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 77e080e7 upstream. -- snip -- - Missing mm/hmm.c and kernel/memremap.c unification. -- hmm code does not need fixes (no altmap) - Missing 7cc7867f ("mm/devm_memremap_pages: enable sub-section remap") -- snip -- Patch series "mm/memory_hotplug: Shrink zones before removing memory", v6. This series fixes the access of uninitialized memmaps when shrinking zones/nodes and when removing memory. Also, it contains all fixes for crashes that can be triggered when removing certain namespace using memunmap_pages() - ZONE_DEVICE, reported by Aneesh. We stop trying to shrink ZONE_DEVICE, as it's buggy, fixing it would be more involved (we don't have SECTION_IS_ONLINE as an indicator), and shrinking is only of limited use (set_zone_contiguous() cannot detect the ZONE_DEVICE as contiguous). We continue shrinking !ZONE_DEVICE zones, however, I reduced the amount of code to a minimum. Shrinking is especially necessary to keep zone->contiguous set where possible, especially, on memory unplug of DIMMs at zone boundaries. -------------------------------------------------------------------------- Zones are now properly shrunk when offlining memory blocks or when onlining failed. This allows to properly shrink zones on memory unplug even if the separate memory blocks of a DIMM were onlined to different zones or re-onlined to a different zone after offlining. Example: :/# cat /proc/zoneinfo Node 1, zone Movable spanned 0 present 0 managed 0 :/# echo "online_movable" > /sys/devices/system/memory/memory41/state :/# echo "online_movable" > /sys/devices/system/memory/memory43/state :/# cat /proc/zoneinfo Node 1, zone Movable spanned 98304 present 65536 managed 65536 :/# echo 0 > /sys/devices/system/memory/memory43/online :/# cat /proc/zoneinfo Node 1, zone Movable spanned 32768 present 32768 managed 32768 :/# echo 0 > /sys/devices/system/memory/memory41/online :/# cat /proc/zoneinfo Node 1, zone Movable spanned 0 present 0 managed 0 This patch (of 10): With an altmap, the memmap falling into the reserved altmap space are not initialized and, therefore, contain a garbage NID and a garbage zone. Make sure to read the NID/zone from a memmap that was initialized. This fixes a kernel crash that is observed when destroying a namespace: kernel BUG at include/linux/mm.h:1107! cpu 0x1: Vector: 700 (Program Check) at [c000000274087890] pc: c0000000004b9728: memunmap_pages+0x238/0x340 lr: c0000000004b9724: memunmap_pages+0x234/0x340 ... pid = 3669, comm = ndctl kernel BUG at include/linux/mm.h:1107! devm_action_release+0x30/0x50 release_nodes+0x268/0x2d0 device_release_driver_internal+0x174/0x240 unbind_store+0x13c/0x190 drv_attr_store+0x44/0x60 sysfs_kf_write+0x70/0xa0 kernfs_fop_write+0x1ac/0x290 __vfs_write+0x3c/0x70 vfs_write+0xe4/0x200 ksys_write+0x7c/0x140 system_call+0x5c/0x68 The "page_zone(pfn_to_page(pfn)" was introduced by 69324b8f ("mm, devm_memremap_pages: add MEMORY_DEVICE_PRIVATE support"), however, I think we will never have driver reserved memory with MEMORY_DEVICE_PRIVATE (no altmap AFAIKS). [david@redhat.com: minimze code changes, rephrase description] Link: http://lkml.kernel.org/r/20191006085646.5768-2-david@redhat.com Fixes: 2c2a5af6 ("mm, memory_hotplug: add nid parameter to arch_remove_memory") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
David Hildenbrand authored
commit d84f2f5a upstream. We don't allow to offline memory block devices that belong to multiple numa nodes. Therefore, such devices can never get removed. It is sufficient to process a single node when removing the memory block. No need to iterate over each and every PFN. We already have the nid stored for each memory block. Make sure that the nid always has a sane value. Please note that checking for node_online(nid) is not required. If we would have a memory block belonging to a node that is no longer offline, then we would have a BUG in the node offlining code. Link: http://lkml.kernel.org/r/20190719135244.15242-1-david@redhat.comSigned-off-by:
-
Dan Williams authored
commit 96da4350 upstream. -- snip -- Minor conflict, keep the altmap check. -- snip -- The zone type check was a leftover from the cleanup that plumbed altmap through the memory hotplug path, i.e. commit da024512 "mm: pass the vmem_altmap to arch_remove_memory and __remove_pages". Link: http://lkml.kernel.org/r/156092352642.979959.6664333788149363039.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
-
David Hildenbrand authored
commit b9bf8d34 upstream. The parameter is unused, so let's drop it. Memory removal paths should never care about zones. This is the job of memory offlining and will require more refactorings. Link: http://lkml.kernel.org/r/20190527111152.16324-12-david@redhat.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arun KS <arunks@codeaurora.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by:
-
David Hildenbrand authored
commit a31b264c upstream. We really don't want anything during memory hotunplug to fail. We always pass a valid memory block device, that check can go. Avoid allocating memory and eventually failing. As we are always called under lock, we can use a static piece of memory. This avoids having to put the structure onto the stack, having to guess about the stack size of callers. Patch inspired by a patch from Oscar Salvador. In the future, there might be no need to iterate over nodes at all. mem->nid should tell us exactly what to remove. Memory block devices with mixed nodes (added during boot) should properly fenced off and never removed. Link: http://lkml.kernel.org/r/20190527111152.16324-11-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit 4c4b7f9b upstream. Let's factor out removing of memory block devices, which is only necessary for memory added via add_memory() and friends that created memory block devices. Remove the devices before calling arch_remove_memory(). This finishes factoring out memory block device handling from arch_add_memory() and arch_remove_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-10-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit db051a0d upstream. Only memory to be added to the buddy and to be onlined/offlined by user space using /sys/devices/system/memory/... needs (and should have!) memory block devices. Factor out creation of memory block devices. Create all devices after arch_add_memory() succeeded. We can later drop the want_memblock parameter, because it is now effectively stale. Only after memory block devices have been added, memory can be onlined by user space. This implies, that memory is not visible to user space at all before arch_add_memory() succeeded. While at it - use WARN_ON_ONCE instead of BUG_ON in moved unregister_memory() - introduce find_memory_block_by_id() to search via block id - Use find_memory_block_by_id() in init_memory_block() to catch duplicates Link: http://lkml.kernel.org/r/20190527111152.16324-8-david@redhat.comSigned-off-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by:
-
David Hildenbrand authored
commit 18115825 upstream. We'll rework hotplug_memory_register() shortly, so it no longer consumes pass a section. [cai@lca.pw: fix a compilation warning] Link: http://lkml.kernel.org/r/1559320186-28337-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/20190527111152.16324-6-david@redhat.comSigned-off-by:
Qian Cai <cai@lca.pw> Acked-by:
-
David Hildenbrand authored
commit 80ec922d upstream. -- snip -- Missing arm64 memory hot(un)plug support. -- snip -- We want to improve error handling while adding memory by allowing to use arch_remove_memory() and __remove_pages() even if CONFIG_MEMORY_HOTREMOVE is not set to e.g., implement something like: arch_add_memory() rc = do_something(); if (rc) { arch_remove_memory(); } We won't get rid of CONFIG_MEMORY_HOTREMOVE for now, as it will require quite some dependencies for memory offlining. Link: http://lkml.kernel.org/r/20190527111152.16324-7-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit 18c86506 upstream. Will come in handy when wanting to handle errors after arch_add_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit ac5c9426 upstream. -- snip -- Minor conflict in arch/powerpc/mm/mem.c -- snip -- All callers of arch_remove_memory() ignore errors. And we should really try to remove any errors from the memory removal path. No more errors are reported from __remove_pages(). BUG() in s390x code in case arch_remove_memory() is triggered. We may implement that properly later. WARN in case powerpc code failed to remove the section mapping, which is better than ignoring the error completely right now. Link: http://lkml.kernel.org/r/20190409100148.24703-5-david@redhat.comSigned-off-by:
-
Aneesh Kumar K.V authored
commit 26ad2671 upstream. This patch fix the below section mismatch warnings. WARNING: vmlinux.o(.text+0x2d1f44): Section mismatch in reference from the function devm_memremap_pages_release() to the function .meminit.text:arch_remove_memory() WARNING: vmlinux.o(.text+0x2d265c): Section mismatch in reference from the function devm_memremap_pages() to the function .meminit.text:arch_add_memory() Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
David Hildenbrand authored
commit 9d1d887d upstream. Let's just warn in case a section is not valid instead of failing to remove somewhere in the middle of the process, returning an error that will be mostly ignored by callers. Link: http://lkml.kernel.org/r/20190409100148.24703-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
commit cb7b3a36 upstream. Failing while removing memory is mostly ignored and cannot really be handled. Let's treat errors in unregister_memory_section() in a nice way, warning, but continuing. Link: http://lkml.kernel.org/r/20190409100148.24703-3-david@redhat.comSigned-off-by:
-
Dan Carpenter authored
commit 16df1456 upstream. The remove_memory_block() function was renamed to in commit cc292b0b ("drivers/base/memory.c: rename remove_memory_block() to remove_memory_section()"). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Baoquan He authored
commit 063b8a4c upstream. The input parameter 'phys_index' of memory_block_action() is actually the section number, but not the phys_index of memory_block. This is a relic from the past when one memory block could only contain one section. Rename it to start_section_nr. And also in remove_memory_section(), the 'node_id' and 'phys_device' arguments are not used by anyone. Remove them. Link: http://lkml.kernel.org/r/20190329144250.14315-2-bhe@redhat.comSigned-off-by:
Baoquan He <bhe@redhat.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Reviewed-by:
-
David Hildenbrand authored
commit d9eb1417 upstream. Patch series "mm/memory_hotplug: Better error handling when removing memory", v1. Error handling when removing memory is somewhat messed up right now. Some errors result in warnings, others are completely ignored. Memory unplug code can essentially not deal with errors properly as of now. remove_memory() will never fail. We have basically two choices: 1. Allow arch_remov_memory() and friends to fail, propagating errors via remove_memory(). Might be problematic (e.g. DIMMs consisting of multiple pieces added/removed separately). 2. Don't allow the functions to fail, handling errors in a nicer way. It seems like most errors that can theoretically happen are really corner cases and mostly theoretical (e.g. "section not valid"). However e.g. aborting removal of sections while all callers simply continue in case of errors is not nice. If we can gurantee that removal of memory always works (and WARN/skip in case of theoretical errors so we can figure out what is going on), we can go ahead and implement better error handling when adding memory. E.g. via add_memory(): arch_add_memory() ret = do_stuff() if (ret) { arch_remove_memory(); goto error; } Handling here that arch_remove_memory() might fail is basically impossible. So I suggest, let's avoid reporting errors while removing memory, warning on theoretical errors instead and continuing instead of aborting. This patch (of 4): __add_pages() doesn't add the memory resource, so __remove_pages() shouldn't remove it. Let's factor it out. Especially as it is a special case for memory used as system memory, added via add_memory() and friends. We now remove the resource after removing the sections instead of doing it the other way around. I don't think this change is problematic. add_memory() register memory resource arch_add_memory() remove_memory arch_remove_memory() release memory resource While at it, explain why we ignore errors and that it only happeny if we remove memory in a different granularity as we added it. [david@redhat.com: fix printk warning] Link: http://lkml.kernel.org/r/20190417120204.6997-1-david@redhat.com Link: http://lkml.kernel.org/r/20190409100148.24703-2-david@redhat.comSigned-off-by:
-
Oscar Salvador authored
commit 2c2a5af6 upstream. -- snip -- Missing unification of mm/hmm.c and kernel/memremap.c -- snip -- Patch series "Do not touch pages in hot-remove path", v2. This patchset aims for two things: 1) A better definition about offline and hot-remove stage 2) Solving bugs where we can access non-initialized pages during hot-remove operations [2] [3]. This is achieved by moving all page/zone handling to the offline stage, so we do not need to access pages when hot-removing memory. [1] https://patchwork.kernel.org/cover/10691415/ [2] https://patchwork.kernel.org/patch/10547445/ [3] https://www.spinics.net/lists/linux-mm/msg161316.html This patch (of 5): This is a preparation for the following-up patches. The idea of passing the nid is that it will allow us to get rid of the zone parameter afterwards. Link: http://lkml.kernel.org/r/20181127162005.15833-2-osalvador@suse.deSigned-off-by:
-
Wei Yang authored
commit 3b6fd6ff upstream. In cb5e39b8 ("drivers: base: refactor add_memory_section() to add_memory_block()"), add_memory_block() is introduced, which is only invoked in memory_dev_init(). When combining these two loops in memory_dev_init() and add_memory_block(), they looks like this: for (i = 0; i < NR_MEM_SECTIONS; i += sections_per_block) for (j = i; (j < i + sections_per_block) && j < NR_MEM_SECTIONS; j++) Since it is sure the (i < NR_MEM_SECTIONS) and j sits in its own memory block, the check of (j < NR_MEM_SECTIONS) is not necessary. This patch just removes this check. Link: http://lkml.kernel.org/r/20181123222811.18216-1-richard.weiyang@gmail.comSigned-off-by:
Wei Yang <richard.weiyang@gmail.com> Reviewed-by:
-
Wei Yang authored
commit 4e0d2e7e upstream. Since the information needed in sparse_add_one_section() is node id to allocate proper memory, it is not necessary to pass its pgdat. This patch changes the prototype of sparse_add_one_section() to pass node id directly. This is intended to reduce misleading that sparse_add_one_section() would touch pgdat. Link: http://lkml.kernel.org/r/20181204085657.20472-2-richard.weiyang@gmail.comSigned-off-by:
-
Wei Yang authored
commit 83af6588 upstream. pgdat_resize_lock is used to protect pgdat's memory region information like: node_start_pfn, node_present_pages, etc. While in function sparse_add/remove_one_section(), pgdat_resize_lock is used to protect initialization/release of one mem_section. This looks not proper. These code paths are currently protected by mem_hotplug_lock currently but should there ever be any reason for locking at the sparse layer a dedicated lock should be introduced. Following is the current call trace of sparse_add/remove_one_section() mem_hotplug_begin() arch_add_memory() add_pages() __add_pages() __add_section() sparse_add_one_section() mem_hotplug_done() mem_hotplug_begin() arch_remove_memory() __remove_pages() __remove_section() sparse_remove_one_section() mem_hotplug_done() The comment above the pgdat_resize_lock also mentions "Holding this will also guarantee that any pfn_valid() stays that way.", which is true with the current implementation and false after this patch. But current implementation doesn't meet this comment. There isn't any pfn walkers to take the lock so this looks like a relict from the past. This patch also removes this comment. [richard.weiyang@gmail.com: v4] Link: http://lkml.kernel.org/r/20181204085657.20472-1-richard.weiyang@gmail.com [mhocko@suse.com: changelog suggestion] Link: http://lkml.kernel.org/r/20181128091243.19249-1-richard.weiyang@gmail.comSigned-off-by:
-
David Hildenbrand authored
commit d15e5926 upstream. Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3. Reading through the code and studying how mem_hotplug_lock is to be used, I noticed that there are two places where we can end up calling device_online()/device_offline() - online_pages()/offline_pages() without the mem_hotplug_lock. And there are other places where we call device_online()/device_offline() without the device_hotplug_lock. While e.g. echo "online" > /sys/devices/system/memory/memory9/state is fine, e.g. echo 1 > /sys/devices/system/memory/memory9/online Will not take the mem_hotplug_lock. However the device_lock() and device_hotplug_lock. E.g. via memory_probe_store(), we can end up calling add_memory()->online_pages() without the device_hotplug_lock. So we can have concurrent callers in online_pages(). We e.g. touch in online_pages() basically unprotected zone->present_pages then. Looks like there is a longer history to that (see Patch #2 for details), and fixing it to work the way it was intended is not really possible. We would e.g. have to take the mem_hotplug_lock in device/base/core.c, which sounds wrong. Summary: We had a lock inversion on mem_hotplug_lock and device_lock(). More details can be found in patch 3 and patch 6. I propose the general rules (documentation added in patch 6): 1. add_memory/add_memory_resource() must only be called with device_hotplug_lock. 2. remove_memory() must only be called with device_hotplug_lock. This is already documented and holds for all callers. 3. device_online()/device_offline() must only be called with device_hotplug_lock. This is already documented and true for now in core code. Other callers (related to memory hotplug) have to be fixed up. 4. mem_hotplug_lock is taken inside of add_memory/remove_memory/ online_pages/offline_pages. To me, this looks way cleaner than what we have right now (and easier to verify). And looking at the documentation of remove_memory, using lock_device_hotplug also for add_memory() feels natural. This patch (of 6): remove_memory() is exported right now but requires the device_hotplug_lock, which is not exported. So let's provide a variant that takes the lock and only export that one. The lock is already held in arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c arch/powerpc/platforms/powernv/memtrace.c Apart from that, there are not other users in the tree. Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.comSigned-off-by:
Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by:
Rashmica Gupta <rashmica.g@gmail.com> Reviewed-by:
-
Martin Schiller authored
commit e21dba7a upstream. This patch fixes 2 issues in x25_connect(): 1. It makes absolutely no sense to reset the neighbour and the connection state after a (successful) nonblocking call of x25_connect. This prevents any connection from being established, since the response (call accept) cannot be processed. 2. Any further calls to x25_connect() while a call is pending should simply return, instead of creating new Call Request (on different logical channels). This patch should also fix the "KASAN: null-ptr-deref Write in x25_connect" and "BUG: unable to handle kernel NULL pointer dereference in x25_connect" bugs reported by syzbot. Signed-off-by:
Martin Schiller <ms@dev.tdt.de> Reported-by: syzbot+429c200ffc8772bfe070@syzkaller.appspotmail.com Reported-by: syzbot+eec0c87f31a7c3b66f7b@syzkaller.appspotmail.com Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
