- 11 Jul, 2018 23 commits
-
-
Theodore Ts'o authored
commit 77260807 upstream. It's really bad when the allocation bitmaps and the inode table overlap with the block group descriptors, since it causes random corruption of the bg descriptors. So we really want to head those off at the pass. https://bugzilla.kernel.org/show_bug.cgi?id=199865Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit e09463f2 upstream. Do not set the b_modified flag in block's journal head should not until after we're sure that jbd2_journal_dirty_metadat() will not abort with an error due to there not being enough space reserved in the jbd2 handle. Otherwise, future attempts to modify the buffer may lead a large number of spurious errors and warnings. This addresses CVE-2018-10883. https://bugzilla.kernel.org/show_bug.cgi?id=200071Signed-off-by:
-
Paulo Alcantara authored
commit 7ffbe655 upstream. For every request we send, whether it is SMB1 or SMB2+, we attempt to reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying out the request. So, while server->tcpStatus != CifsNeedReconnect, we wait for the reconnection to succeed on wait_event_interruptible_timeout(). If it returns, that means that either the condition was evaluated to true, or timeout elapsed, or it was interrupted by a signal. Since we're not handling the case where the process woke up due to a received signal (-ERESTARTSYS), the next call to wait_event_interruptible_timeout() will _always_ fail and we end up looping forever inside either cifs_reconnect_tcon() or smb2_reconnect(). Here's an example of how to trigger that: $ mount.cifs //foo/share /mnt/test -o username=foo,password=foo,vers=1.0,hard (break connection to server before executing bellow cmd) $ stat -f /mnt/test & sleep 140 [1] 2511 $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f /mnt/test $ kill -9 2511 (wait for a while; process is stuck in the kernel) $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f /mnt/test By using 'hard' mount point means that cifs.ko will keep retrying indefinitely, however we must allow the process to be killed otherwise it would hang the system. Signed-off-by:
Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Lars Ellenberg authored
commit 64dafbc9 upstream. We have struct drbd_requests { ... struct bio *private_bio; ... } to hold a bio clone for local submission. On local IO completion, we put that bio, and in case we want to use the result later, we overload that member to hold the ERR_PTR() of the completion result, Which, before v4.3, used to be the passed in "int error", so we could first bio_put(), then assign. v4.3-rc1~100^2~21 4246a0b6 block: add a bi_error field to struct bio changed that: bio_put(req->private_bio); - req->private_bio = ERR_PTR(error); + req->private_bio = ERR_PTR(bio->bi_error); Which introduces an access after free, because it was non obvious that req->private_bio == bio. Impact of that was mostly unnoticable, because we only use that value in a multiple-failure case, and even then map any "unexpected" error code to EIO, so worst case we could potentially mask a more specific error with EIO in a multiple failure case. Unless the pointed to memory region was unmapped, as is the case with CONFIG_DEBUG_PAGEALLOC, in which case this results in BUG: unable to handle kernel paging request v4.13-rc1~70^2~75 4e4cbee9 block: switch bios to blk_status_t changes it further to bio_put(req->private_bio); req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status)); And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected values, which catches this "sometimes", if the memory has been reused quickly enough for other things. Should also go into stable since 4.3, with the trivial change around 4.13. Cc: stable@vger.kernel.org Fixes: 4246a0b6 block: add a bi_error field to struct bio Reported-by:
Sarah Newman <srn@prgmr.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Christian Borntraeger authored
commit 891f6a72 upstream. In the critical section cleanup we must not mess with r1. For march=z9 or older, larl + ex (instead of exrl) are used with r1 as a temporary register. This can clobber r1 in several interrupt handlers. Fix this by using r11 as a temp register. r11 is being saved by all callers of cleanup_critical. Fixes: 6dd85fbb ("s390: move expoline assembler macros to a header") Cc: stable@vger.kernel.org #v4.16 Reported-by:
Oliver Kurz <okurz@suse.com> Reported-by:
Petr Tesařík <ptesarik@suse.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Jann Horn authored
commit 26b5b874 upstream. As Al Viro noted in commit 128394ef ("sg_write()/bsg_write() is not fit to be called under KERNEL_DS"), sg improperly accesses userspace memory outside the provided buffer, permitting kernel memory corruption via splice(). But it doesn't just do it on ->write(), also on ->read(). As a band-aid, make sure that the ->read() and ->write() handlers can not be called in weird contexts (kernel context or credentials different from file opener), like for ib_safe_file_access(). If someone needs to use these interfaces from different security contexts, a new interface should be written that goes through the ->ioctl() handler. I've mostly copypasted ib_safe_file_access() over as sg_safe_file_access() because I couldn't find a good common header - please tell me if you know a better way. [mkp: s/_safe_/_check_/] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Changbin Du authored
commit 1fe4293f upstream. The function_graph tracer does not show the interrupt return marker for the leaf entry. On leaf entries, we see an unbalanced interrupt marker (the interrupt was entered, but nevern left). Before: 1) | SyS_write() { 1) | __fdget_pos() { 1) 0.061 us | __fget_light(); 1) 0.289 us | } 1) | vfs_write() { 1) 0.049 us | rw_verify_area(); 1) + 15.424 us | __vfs_write(); 1) ==========> | 1) 6.003 us | smp_apic_timer_interrupt(); 1) 0.055 us | __fsnotify_parent(); 1) 0.073 us | fsnotify(); 1) + 23.665 us | } 1) + 24.501 us | } After: 0) | SyS_write() { 0) | __fdget_pos() { 0) 0.052 us | __fget_light(); 0) 0.328 us | } 0) | vfs_write() { 0) 0.057 us | rw_verify_area(); 0) | __vfs_write() { 0) ==========> | 0) 8.548 us | smp_apic_timer_interrupt(); 0) <========== | 0) + 36.507 us | } /* __vfs_write */ 0) 0.049 us | __fsnotify_parent(); 0) 0.066 us | fsnotify(); 0) + 50.064 us | } 0) + 50.952 us | } Link: http://lkml.kernel.org/r/1517413729-20411-1-git-send-email-changbin.du@intel.com Cc: stable@vger.kernel.org Fixes: f8b755ac ("tracing/function-graph-tracer: Output arrows signal on hardirq call/return") Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Cannon Matthews authored
commit 520495fe upstream. When booting with very large numbers of gigantic (i.e. 1G) pages, the operations in the loop of gather_bootmem_prealloc, and specifically prep_compound_gigantic_page, takes a very long time, and can cause a softlockup if enough pages are requested at boot. For example booting with 3844 1G pages requires prepping (set_compound_head, init the count) over 1 billion 4K tail pages, which takes considerable time. Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to prevent this lockup. Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and no softlockup is reported, and the hugepages are reported as successfully setup. Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.comSigned-off-by:
Cannon Matthews <cannonmatthews@google.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Richard Weinberger authored
commit 78193237 upstream. Fastmap cannot track the LEB unmap operation, therefore it can happen that after an interrupted erasure the mapping still looks good from Fastmap's point of view, while reading from the PEB will cause an ECC error and confuses the upper layer. Instead of teaching users of UBI how to deal with that, we read back the VID header and check for errors. If the PEB is empty or shows ECC errors we fixup the mapping and schedule the PEB for erasure. Fixes: dbb7d2a8 ("UBI: Add fastmap core") Cc: <stable@vger.kernel.org> Reported-by:
martin bayern <Martinbayern@outlook.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Sean Nyekjaer authored
commit df07101e upstream. According to the reference manual the shp_2_mcu / mcu_2_shp scripts must be used for devices connected through the SPBA. This fixes an issue we saw with DMA transfers. Sometimes the SPI controller RX FIFO was not empty after a DMA transfer and the driver got stuck in the next PIO transfer when it read one word more than expected. commit dd4b487b ("ARM: dts: imx6: Use correct SDMA script for SPI cores") is fixing the same issue but only for SPI1 - 4. Fixes: 67794025 ("ARM: dts: imx6q: enable dma for ecspi5") Signed-off-by:
Sean Nyekjaer <sean.nyekjaer@prevas.dk> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Taehee Yoo authored
commit adc972c5 upstream. When depth of chain is bigger than NFT_JUMP_STACK_SIZE, the nft_do_chain crashes. But there is no need to crash hard here. Suggested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Keith Busch authored
commit 161b8be2 upstream. A spurious interrupt before the nvme driver has initialized the completion queue may inadvertently cause the driver to believe it has a completion to process. This may result in a NULL dereference since the nvmeq's tags are not set at this point. The patch initializes the host's CQ memory so that a spurious interrupt isn't mistaken for a real completion. Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Masami Hiramatsu authored
commit 804dec5b upstream. Do not modify singlestep execution buffer (kprobe.ainsn.insn) while resuming from single-stepping, instead, modifies the buffer to add a jump back instruction at preparing buffer. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David S . Miller <davem@davemloft.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ye Xiaolong <xiaolong.ye@intel.com> Link: http://lkml.kernel.org/r/149076361560.22469.1610155860343077495.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Alexey Makhalov <amakhalov@vmware.com> Signed-off-by:
-
Ben Hutchings authored
The validation code modified by commit 5b5e7a0d ("net: metrics: add proper netlink validation") is organised differently in older kernel versions. The fib_convert_metrics() function that is modified in the backports to 4.4 and 4.9 needs to returns an error code, not a success flag. Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Wolfram Sang authored
commit ae481cc1 upstream. Resume failed because of uninitialized registers. Instead of adding a resume callback, we simply initialize registers before every transfer. This lightweight change is more robust and will keep us safe if we ever need support for power domains or dynamic frequency changes. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
commit 2f38c3c0 upstream. Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future) rx_hdr_status is not padded to align in 4-byte boundary. Define a new hw_params field to handle different alignment behaviour between different hw. This patch fixes improper retrieval of rfc1042 header with QCA4019. This patch along with "ath10k: Properly remove padding from the start of rx payload" will fix traffic failure in ethernet decap mode for QCA4019. Signed-off-by:
Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> [bwh: This just adds the part that was left out of the previous backport, commit b88fb9ea.] Signed-off-by:
-
Dave Hansen authored
commit 02afeaae upstream. The x86 early command line parsing in cmdline_find_option_bool() is buggy. If it matches a specified 'option' all the way to the end of the command-line, it will consider it a match. For instance, cmdline = "foo"; cmdline_find_option_bool(cmdline, "fool"); will return 1. This is particularly annoying since we have actual FPU options like "noxsave" and "noxsaves" So, command-line "foo bar noxsave" will match *BOTH* a "noxsave" and "noxsaves". (This turns out not to be an actual problem because "noxsave" implies "noxsaves", but it's still confusing.) To fix this, we simplify the code and stop tracking 'len'. 'len' was trying to indicate either the NULL terminator *OR* the end of a non-NULL-terminated command line at 'COMMAND_LINE_SIZE'. But, each of the three states is *already* checking 'cmdline' for a NULL terminator. We _only_ need to check if we have overrun 'COMMAND_LINE_SIZE', and that we can do without keeping 'len' around. Also add some commends to clarify what is going on. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: fenghua.yu@intel.com Cc: yu-cheng.yu@intel.com Link: http://lkml.kernel.org/r/20151222225238.9AEB560C@viggo.jf.intel.comSigned-off-by:
-
Tetsuo Handa authored
commit ebec3f8f upstream. syzbot is reporting stalls at __process_echoes() [1]. This is because since ldata->echo_commit < ldata->echo_tail becomes true for some reason, the discard loop is serving as almost infinite loop. This patch tries to avoid falling into ldata->echo_commit < ldata->echo_tail situation by making access to echo_* variables more carefully. Since reset_buffer_flags() is called without output_lock held, it should not touch echo_* variables. And omit a call to reset_buffer_flags() from n_tty_open() by using vzalloc(). Since add_echo_byte() is called without output_lock held, it needs memory barrier between storing into echo_buf[] and incrementing echo_head counter. echo_buf() needs corresponding memory barrier before reading echo_buf[]. Lack of handling the possibility of not-yet-stored multi-byte operation might be the reason of falling into ldata->echo_commit < ldata->echo_tail situation, for if I do WARN_ON(ldata->echo_commit == tail + 1) prior to echo_buf(ldata, tail + 1), the WARN_ON() fires. Also, explicitly masking with buffer for the former "while" loop, and use ldata->echo_commit > tail for the latter "while" loop. [1] https://syzkaller.appspot.com/bug?id=17f23b094cd80df750e5b0f8982c521ee6bcbf40Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+108696293d7a21ab688f@syzkaller.appspotmail.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Laura Abbott authored
commit 0a2bc003 upstream. The expected return value from ion_map_kernel is an ERR_PTR. The error path for a vmalloc failure currently just returns NULL, triggering a warning in ion_buffer_kmap_get. Encode the vmalloc failure as an ERR_PTR. Reported-by: syzbot+55b1d9f811650de944c6@syzkaller.appspotmail.com Signed-off-by:
Laura Abbott <labbott@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Tetsuo Handa authored
commit 3d63b7e4 upstream. syzbot is reporting stalls at n_tty_receive_char_special() [1]. This is because comparison is not working as expected since ldata->read_head can change at any moment. Mitigate this by explicitly masking with buffer size when checking condition for "while" loops. [1] https://syzkaller.appspot.com/bug?id=3d7481a346958d9469bebbeb0537d5f056bdd6e8Signed-off-by:
syzbot <syzbot+18df353d7540aa6b5467@syzkaller.appspotmail.com> Fixes: bc5a5e3f ("n_tty: Don't wrap input buffer indices at buffer size") Cc: stable <stable@vger.kernel.org> Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Karoly Pados authored
commit 2f839823 upstream. Silicon Labs defines alternative VID/PID pairs for some chips that when used will automatically install drivers for Windows users without manual intervention. Unfortunately, these IDs are not recognized by the Linux module, so using these IDs improves user experience on one platform but degrades it on Linux. This patch addresses this problem. Signed-off-by:
Karoly Pados <pados@pados.hu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 24160628 upstream. Add device ids for CESINEL products. Reported-by:
Carlos Barcala Lara <cabl@cesinel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Houston Yaroschoff authored
commit 4a762569 upstream. Uniden UBC125 radio scanner has USB interface which fails to work with cdc_acm driver: usb 1-1.5: new full-speed USB device number 4 using xhci_hcd cdc_acm 1-1.5:1.0: Zero length descriptor references cdc_acm: probe of 1-1.5:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue: usb 1-4: new full-speed USB device number 15 using xhci_hcd usb 1-4: New USB device found, idVendor=1965, idProduct=0018 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: UBC125XLT usb 1-4: Manufacturer: Uniden Corp. usb 1-4: SerialNumber: 0001 cdc_acm 1-4:1.0: ttyACM0: USB ACM device `lsusb -v` of the device: Bus 001 Device 015: ID 1965:0018 Uniden Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1965 Uniden Corporation idProduct 0x0018 bcdDevice 0.01 iManufacturer 1 Uniden Corp. iProduct 2 UBC125XLT iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 48 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by:
Houston Yaroschoff <hstn@4ever3.net> Cc: stable <stable@vger.kernel.org> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
- 03 Jul, 2018 17 commits
-
-
Greg Kroah-Hartman authored
-
Szymon Janc authored
commit 082f2300 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Bjørn Mork authored
commit 49c2c3f2 upstream. Commit 4a0e3e98 ("cdc_ncm: Add support for moving NDP to end of NCM frame") added logic to reserve space for the NDP at the end of the NTB/skb. This reservation did not take the final alignment of the NDP into account, causing us to reserve too little space. Additionally the padding prior to NDP addition did not ensure there was enough space for the NDP. The NTB/skb with the NDP appended would then exceed the configured max size. This caused the final padding of the NTB to use a negative count, padding to almost INT_MAX, and resulting in: [60103.825970] BUG: unable to handle kernel paging request at ffff9641f2004000 [60103.825998] IP: __memset+0x24/0x30 [60103.826001] PGD a6a06067 P4D a6a06067 PUD 4f65a063 PMD 72003063 PTE 0 [60103.826013] Oops: 0002 [#1] SMP NOPTI [60103.826018] Modules linked in: (removed( [60103.826158] CPU: 0 PID: 5990 Comm: Chrome_DevTools Tainted: G O 4.14.0-3-amd64 #1 Debian 4.14.17-1 [60103.826162] Hardware name: LENOVO 20081 BIOS 41CN28WW(V2.04) 05/03/2012 [60103.826166] task: ffff964193484fc0 task.stack: ffffb2890137c000 [60103.826171] RIP: 0010:__memset+0x24/0x30 [60103.826174] RSP: 0000:ffff964316c03b68 EFLAGS: 00010216 [60103.826178] RAX: 0000000000000000 RBX: 00000000fffffffd RCX: 000000001ffa5000 [60103.826181] RDX: 0000000000000005 RSI: 0000000000000000 RDI: ffff9641f2003ffc [60103.826184] RBP: ffff964192f6c800 R08: 00000000304d434e R09: ffff9641f1d2c004 [60103.826187] R10: 0000000000000002 R11: 00000000000005ae R12: ffff9642e6957a80 [60103.826190] R13: ffff964282ff2ee8 R14: 000000000000000d R15: ffff9642e4843900 [60103.826194] FS: 00007f395aaf6700(0000) GS:ffff964316c00000(0000) knlGS:0000000000000000 [60103.826197] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60103.826200] CR2: ffff9641f2004000 CR3: 0000000013b0c000 CR4: 00000000000006f0 [60103.826204] Call Trace: [60103.826212] <IRQ> [60103.826225] cdc_ncm_fill_tx_frame+0x5e3/0x740 [cdc_ncm] [60103.826236] cdc_ncm_tx_fixup+0x57/0x70 [cdc_ncm] [60103.826246] usbnet_start_xmit+0x5d/0x710 [usbnet] [60103.826254] ? netif_skb_features+0x119/0x250 [60103.826259] dev_hard_start_xmit+0xa1/0x200 [60103.826267] sch_direct_xmit+0xf2/0x1b0 [60103.826273] __dev_queue_xmit+0x5e3/0x7c0 [60103.826280] ? ip_finish_output2+0x263/0x3c0 [60103.826284] ip_finish_output2+0x263/0x3c0 [60103.826289] ? ip_output+0x6c/0xe0 [60103.826293] ip_output+0x6c/0xe0 [60103.826298] ? ip_forward_options+0x1a0/0x1a0 [60103.826303] tcp_transmit_skb+0x516/0x9b0 [60103.826309] tcp_write_xmit+0x1aa/0xee0 [60103.826313] ? sch_direct_xmit+0x71/0x1b0 [60103.826318] tcp_tasklet_func+0x177/0x180 [60103.826325] tasklet_action+0x5f/0x110 [60103.826332] __do_softirq+0xde/0x2b3 [60103.826337] irq_exit+0xae/0xb0 [60103.826342] do_IRQ+0x81/0xd0 [60103.826347] common_interrupt+0x98/0x98 [60103.826351] </IRQ> [60103.826355] RIP: 0033:0x7f397bdf2282 [60103.826358] RSP: 002b:00007f395aaf57d8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff6e [60103.826362] RAX: 0000000000000000 RBX: 00002f07bc6d0900 RCX: 00007f39752d7fe7 [60103.826365] RDX: 0000000000000022 RSI: 0000000000000147 RDI: 00002f07baea02c0 [60103.826368] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [60103.826371] R10: 00000000ffffffff R11: 0000000000000000 R12: 00002f07baea02c0 [60103.826373] R13: 00002f07bba227a0 R14: 00002f07bc6d090c R15: 0000000000000000 [60103.826377] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 [60103.826442] RIP: __memset+0x24/0x30 RSP: ffff964316c03b68 [60103.826444] CR2: ffff9641f2004000 Commit e1069bbf ("net: cdc_ncm: Reduce memory use when kernel memory low") made this bug much more likely to trigger by reducing the NTB size under memory pressure. Link: https://bugs.debian.org/893393Reported-by:
Горбешко Богдан <bodqhrohro@gmail.com> Reported-and-tested-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: Enrico Mioso <mrkiko.rs@gmail.com> Fixes: 4a0e3e98 ("cdc_ncm: Add support for moving NDP to end of NCM frame") [ bmork: tx_curr_size => tx_max and context fixup for v4.12 and older ] Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mike Snitzer authored
commit a685557f upstream. Discards issued to a DM thin device can complete to userspace (via fstrim) _before_ the metadata changes associated with the discards is reflected in the thinp superblock (e.g. free blocks). As such, if a user constructs a test that loops repeatedly over these steps, block allocation can fail due to discards not having completed yet: 1) fill thin device via filesystem file 2) remove file 3) fstrim From initial report, here: https://www.redhat.com/archives/dm-devel/2018-April/msg00022.html "The root cause of this issue is that dm-thin will first remove mapping and increase corresponding blocks' reference count to prevent them from being reused before DISCARD bios get processed by the underlying layers. However. increasing blocks' reference count could also increase the nr_allocated_this_transaction in struct sm_disk which makes smd->old_ll.nr_allocated + smd->nr_allocated_this_transaction bigger than smd->old_ll.nr_blocks. In this case, alloc_data_block() will never commit metadata to reset the begin pointer of struct sm_disk, because sm_disk_get_nr_free() always return an underflow value." While there is room for improvement to the space-map accounting that thinp is making use of: the reality is this test is inherently racey and will result in the previous iteration's fstrim's discard(s) completing vs concurrent block allocation, via dd, in the next iteration of the loop. No amount of space map accounting improvements will be able to allow user's to use a block before a discard of that block has completed. So the best we can really do is allow DM thinp to gracefully handle such aggressive use of all the pool's data by degrading the pool into out-of-data-space (OODS) mode. We _should_ get that behaviour already (if space map accounting didn't falsely cause alloc_data_block() to believe free space was available).. but short of that we handle the current reality that dm_pool_alloc_data_block() can return -ENOSPC. Reported-by:
Dennis Yang <dennisyang@qnap.com> Cc: stable@vger.kernel.org Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Keith Busch authored
commit 15bfd21f upstream. A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Tested-by:
-
Maxime Chevallier authored
commit ce99319a upstream. When SPI transfers can be offloaded using DMA, the SPI core need to build a scatterlist to make sure that the buffer to be transferred is dma-able. This patch fixes the scatterlist entry size computation in the case where the maximum acceptable scatterlist entry supported by the DMA controller is less than PAGE_SIZE, when the buffer is vmalloced. For each entry, the actual size is given by the minimum between the desc_len (which is the max buffer size supported by the DMA controller) and the remaining buffer length until we cross a page boundary. Fixes: 65598c13 ("spi: Fix per-page mapping of unaligned vmalloc-ed buffer") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Liu Bo authored
commit 58113753 upstream. Fstests generic/475 provides a way to fail metadata reads while checking if checksum exists for the inode inside run_delalloc_nocow(), and csum_exist_in_range() interprets error (-EIO) as inode having checksum and makes its caller enter the cow path. In case of free space inode, this ends up with a warning in cow_file_range(). The same problem applies to btrfs_cross_ref_exist() since it may also read metadata in between. With this, run_delalloc_nocow() bails out when errors occur at the two places. cc: <stable@vger.kernel.org> v2.6.28+ Fixes: 17d217fe ("Btrfs: fix nodatasum handling in balancing code") Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Takashi Iwai authored
commit 275ec0cb upstream. Fujitsu Seimens ESPRIMO Mobile U9210 requires the same fixup as H270 for the correct pin configs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200107 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
??? authored
commit e0ae2519 upstream. Some touchpad has middle key and it will be indicated in bit 2 of packet[0]. We need to fix V4 formation's byte mask to prevent error decoding. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Aaron Ma authored
commit 24bb555e upstream. PNPID is better way to identify the type of touchpads. Enable middle button support on 2 types of touchpads on Lenovo P52. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit 50fc7b61 upstream. Commit 40f7090b ("Input: elan_i2c_smbus - fix corrupted stack") fixed most of the functions using i2c_smbus_read_block_data() to allocate a buffer with the maximum block size. However three functions were left unchanged: * In elan_smbus_initialize(), increase the buffer size in the same way. * In elan_smbus_calibrate_result(), the buffer is provided by the caller (calibrate_store()), so introduce a bounce buffer. Also name the result buffer size. * In elan_smbus_get_report(), the buffer is provided by the caller but happens to be the right length. Add a compile-time assertion to ensure this remains the case. Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by:
-
Jan Kara authored
commit fa65653e upstream. Detect when a directory entry is (possibly partially) beyond directory size and return EIO in that case since it means the filesystem is corrupted. Otherwise directory operations can further corrupt the directory and possibly also oops the kernel. CC: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> CC: stable@vger.kernel.org Reported-and-tested-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Boris Ostrovsky authored
commit eef04c7b upstream. Commit 910f8bef ("xen/pirq: fix error path cleanup when binding MSIs") fixed a couple of errors in error cleanup path of xen_bind_pirq_msi_to_irq(). This cleanup allowed a call to __unbind_from_irq() with an unbound irq, which would result in triggering the BUG_ON there. Since there is really no reason for the BUG_ON (xen_free_irq() can operate on unbound irqs) we can remove it. Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Alexandr Savca authored
commit 8938fc7b upstream. Add ELAN0618 to the list of supported touchpads; this ID is used in Lenovo v330 15IKB devices. Signed-off-by:
Alexandr Savca <alexandr.savca@saltedge.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Kees Cook authored
commit 9f645bcc upstream. cmap->len can get close to INT_MAX/2, allowing for an integer overflow in allocation. This uses kmalloc_array() instead to catch the condition. Reported-by:
Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Fixes: 8bdb3a2d ("uvesafb: the driver core") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Dave Wysochanski authored
commit d6889480 upstream. In nfs_idmap_read_and_verify_message there is an incorrect sprintf '%d' that converts the __u32 'im_id' from struct idmap_msg to 'id_str', which is a stack char array variable of length NFS_UINT_MAXLEN == 11. If a uid or gid value is > 2147483647 = 0x7fffffff, the conversion overflows into a negative value, for example: crash> p (unsigned) (0x80000000) $1 = 2147483648 crash> p (signed) (0x80000000) $2 = -2147483648 The '-' sign is written to the buffer and this causes a 1 byte overflow when the NULL byte is written, which corrupts kernel stack memory. If CONFIG_CC_STACKPROTECTOR_STRONG is set we see a stack-protector panic: [11558053.616565] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa05b8a8c [11558053.639063] CPU: 6 PID: 9423 Comm: rpc.idmapd Tainted: G W ------------ T 3.10.0-514.el7.x86_64 #1 [11558053.641990] Hardware name: Red Hat OpenStack Compute, BIOS 1.10.2-3.el7_4.1 04/01/2014 [11558053.644462] ffffffff818c7bc0 00000000b1f3aec1 ffff880de0f9bd48 ffffffff81685eac [11558053.646430] ffff880de0f9bdc8 ffffffff8167f2b3 ffffffff00000010 ffff880de0f9bdd8 [11558053.648313] ffff880de0f9bd78 00000000b1f3aec1 ffffffff811dcb03 ffffffffa05b8a8c [11558053.650107] Call Trace: [11558053.651347] [<ffffffff81685eac>] dump_stack+0x19/0x1b [11558053.653013] [<ffffffff8167f2b3>] panic+0xe3/0x1f2 [11558053.666240] [<ffffffff811dcb03>] ? kfree+0x103/0x140 [11558053.682589] [<ffffffffa05b8a8c>] ? idmap_pipe_downcall+0x1cc/0x1e0 [nfsv4] [11558053.689710] [<ffffffff810855db>] __stack_chk_fail+0x1b/0x30 [11558053.691619] [<ffffffffa05b8a8c>] idmap_pipe_downcall+0x1cc/0x1e0 [nfsv4] [11558053.693867] [<ffffffffa00209d6>] rpc_pipe_write+0x56/0x70 [sunrpc] [11558053.695763] [<ffffffff811fe12d>] vfs_write+0xbd/0x1e0 [11558053.702236] [<ffffffff810acccc>] ? task_work_run+0xac/0xe0 [11558053.704215] [<ffffffff811fec4f>] SyS_write+0x7f/0xe0 [11558053.709674] [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b Fix this by calling the internally defined nfs_map_numeric_to_string() function which properly uses '%u' to convert this __u32. For consistency, also replace the one other place where snprintf is called. Signed-off-by:
Dave Wysochanski <dwysocha@redhat.com> Reported-by:
Stephen Johnston <sjohnsto@redhat.com> Fixes: cf4ab538 ("NFSv4: Fix the string length returned by the idmapper") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Scott Mayhew authored
commit 9c2ece6e upstream. nfsd4_readdir_rsize restricts rd_maxcount to svc_max_payload when estimating the size of the readdir reply, but nfsd_encode_readdir restricts it to INT_MAX when encoding the reply. This can result in log messages like "kernel: RPC request reserved 32896 but used 1049444". Restrict rd_dircount similarly (no reason it should be larger than svc_max_payload). Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
