- 26 Sep, 2022 5 commits
-
-
Philipp Hortmann authored
Rename variable eRfSleep to rf_sleep, eRfPowerStateToSet to rf_power_state_to_set and RfOffReason to rf_off_reason to avoid CamelCase which is not accepted by checkpatch. Omit the upfront "e" as no RfSleep and RfPowerStateToSet exist and it makes the variables unnecessary long. Signed-off-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/58e21e5cf86270edae93162db2395e6348c9c424.1664055213.git.philipp.g.hortmann@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Philipp Hortmann authored
Rename variable eRFPowerState to rf_power_state, eRfOff to rf_off and eRfOn to rf_on to avoid CamelCase which is not accepted by checkpatch. Omit the upfront "e" as no RFPowerState, RfOff and RfOn exist and it makes the variables unnecessary long. Signed-off-by:
-
Greg Kroah-Hartman authored
In the years since it was added (2012), no one has stepped up to maintain this properly and get it merged into the kernel tree. So remove it as it's obviously not being used. If it is being used, we can easily revert this and take the time to get it out of the staging tree. Link: https://lore.kernel.org/r/20220924105817.808385-1-gregkh@linuxfoundation.orgSigned-off-by:
-
Valentin Vidic authored
Fix checkpatch warnings for variables: LinkCtrlReg, DeviceID, RevisionID, IrqLine. Tested-by:
Valentin Vidic <vvidic@valentin-vidic.from.hr> Link: https://lore.kernel.org/r/20220925123810.2492865-1-vvidic@valentin-vidic.from.hrSigned-off-by:
-
Dragan Cvetic authored
Rename: Current_Tx_Rate_Reg to CURRENT_TX_RATE_REG, Initial_Tx_Rate_Reg to INITIAL_TX_RATE_REG and Tx_Retry_Count_Reg to TX_RETRY_COUNT_REG to avoid CamelCase which is not accepted by checkpatch.pl. Tested-by:
Dragan Cvetic <dragan.m.cvetic@gmail.com> Link: https://lore.kernel.org/r/20220924225126.10527-1-dragan.m.cvetic@gmail.comSigned-off-by:
-
- 24 Sep, 2022 35 commits
-
-
Martin Kaiser authored
Both LED_BLINK_StartToBlink and LED_BLINK_RUNTOP in enum LED_STATE_871x are not used in the r8188eu driver. Remove them. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220918175700.215170-7-martin@kaiser.cxSigned-off-by:
-
Martin Kaiser authored
We don't have to check bSurpriseRemoved in the SwLedOn function. SwLedOn calls rtw_read8 which in turn calls usb_read. This function checks bSurpriseRemoved for us. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Both bLedOn and BlinkingLedState in struct led_priv store the same information. The boolean bLedOn stores the curent led state while BlinkingLedState stores the next led state to be set during blinking, which is the inverse of the current led state. (The led is either off or blinking, it's never continuously on.) This patch removes BlinkingLedState and uses bLedOn instead. The LED_BLINK_WPS_STOP case in blink_work checked for pLed->BlinkingLedState != RTW_LED_ON. This is true if the next led blinking state is ON, i.e. if the led has just been switched off by blink_work, i.e. if (!pLed->bLedOn). Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Remove the bLedNoLinkBlinkInProgress state variable. Its sole purpose is to block subsequent requests for "no link" blinking when this blinking pattern is already active. It's perfectly safe to restart "no link" blinking. We can remove bLedNoLinkBlinkInProgress and the many places where it's updated. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Always update the status variables in rtw_led_control when we start blinking to show that wps was successful. The if statements are not necessary. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
We can always cancel blink_work during wps_stop. The blinking pattern will be updated to show that wps was successful. Another worker will be started for this. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of rtw_xmit_entry should be changed from int to netdev_tx_t. Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Reported-by:
Dan Carpenter <error27@gmail.com> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Link: https://lore.kernel.org/r/20220914211606.423959-1-nhuck@google.comSigned-off-by:
-
Xiaoke Wang authored
In _rtw_init_xmit_priv(), there are several error paths for allocation failures just jump to the `exit` section. However, there is no action will be performed, so the allocated resources are not properly released, which leads to various memory leaks. To properly release them, this patch unifies the error handling code and several error handling paths are added. According to the allocation sequence, if the validation fails, it will jump to its corresponding error tag to release the resources. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Xiaoke Wang <xkernel.wang@foxmail.com> Link: https://lore.kernel.org/r/tencent_DB57E4F270F4539485C32B05FDAF8394310A@qq.comSigned-off-by:
-
Xiaoke Wang authored
In rtw_xmit_resource_alloc(), if usb_alloc_urb() fails, then the memory `pxmitbuf->pallocated_buf` which is allocated by kzalloc() is not properly released before returning. So this patch adds kfree() on the above error path to release it in time. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Reviewed-by:
-
Michael Straube authored
The functions _rtw_init_recv_priv(), _rtw_free_recv_priv() and rtw_recv_entry() are defined in rtw_recv.c. Move their prototypes from recv_osdep.h to rtw_recv.h. Move the last two remaining prototypes netdev_open() and netdev_close() from recv_osdep.h to osdep_intf.h. That is a more appropriate place and we can remove recv_osdep.h. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20220911174933.3784-4-straube.linux@gmail.comSigned-off-by:
-
Michael Straube authored
The function prototypes rtw_recv_returnpacket(), rtw_init_recv_priv() and rtw_free_recv_priv() are not used. Remove them. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
The function _netdev_open() is only used in os_intfs.c. Make it static. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
In statements spaces should be used not tabs. Replace tabs withs spaces in two return statements in odm_query_rxpwrpercentage(). Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
Rename the variable 'AntPower' in odm_query_rxpwrpercentage() to avoid camel case. AntPower -> antpower Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
Rename odm_QueryRxPwrPercentage() to avoid camel case. odm_QueryRxPwrPercentage -> odm_query_rxpwrpercentage Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
The variable 'retsig' in odm_signal_scale_mapping() is set in the function before it returns, so it is not needed to initialize it. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
Rename variables in odm_signal_scale_mapping() to avoid camel case. CurrSig -> currsig RetSig -> retsig Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
Rename odm_SignalScaleMapping() to avoid camel case. odm_SignalScaleMapping -> odm_signal_scale_mapping Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Always update the status variables in rtw_led_control when we start link blinking. The if statements are not necessary. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Cancel blink_work before we start link blinking. Another worker will be scheduled after the state variables are updated. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The blinking code to signal that a link is up has the same big if clause around it as most other blink events. Revert this if condition and exit if we're already blinking to show that the link is up. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Always update the status variables in rtw_led_control when we start tx/rx blinking. The if statements are not necessary. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Cancel blink_work before we start tx/rx blinking. Another worker will be scheduled after the state variables are updated. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The code for tx/rx blinking is wrapped into a big if clause to prevent restarting if tx/rx blinking is already running. Revert the if condition and exit if tx/rx blinking is running. This does not change the behaviour. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Always update the status variables in rtw_led_control when we start scan blinking. The if statements are not necessary. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Cancel blink_work before we start scan blinking. Another worker will be scheduled after the state variables are updated. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The code for scan blinking is wrapped into a big if clause to prevent restarting if scan blinking is already running. Revert the if condition and exit if scan blinking is running. This does not change the behaviour. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Xiaoke Wang authored
In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated in failure, then `pcmdpriv->cmd_allocated_buf` will not be properly released. Besides, considering there are only two error paths and the first one can directly return, we do not need to implicitly jump to the `exit` tag to execute the error handling code. So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error path to release the resource and simplified the return logic of rtw_init_cmd_priv(). As there is no proper device to test with, no runtime testing was performed. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of cvm_oct_xmit and cvm_oct_xmit_pow should be changed from int to netdev_tx_t. Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Liu Shixin authored
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No functional change. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20220922142548.3248951-1-liushixin2@huawei.comSigned-off-by:
-
Nathan Huckleberry authored
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of ieee80211_xmit should be changed from int to netdev_tx_t. Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Reported-by:
-
Nam Cao authored
In some initialization functions of this driver, memory is allocated with 'i' acting as an index variable and increasing from 0. The commit in "Fixes" introduces some clean-up codes in case of allocation failure, which free memory in reverse order with 'i' decreasing to 0. However, there are some problems: - The case i=0 is left out. Thus memory is leaked. - In case memory allocation fails right from the start, the memory freeing loops will start with i=-1 and invalid memory locations will be accessed. One of these loops has been fixed in commit c8ff9153 ("staging: vt6655: fix potential memory leak"). Fix the remaining erroneous loops. Link: https://lore.kernel.org/linux-staging/Yx9H1zSpxmNqx6Xc@kadam/ Fixes: 5341ee0a ("staging: vt6655: check for memory allocation failures") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Tested-by:
Nam Cao <namcaov@gmail.com> Link: https://lore.kernel.org/r/20220912170429.29852-1-namcaov@gmail.comSigned-off-by:
-
Kang Minchul authored
This patch adds a blank line in order to fix checkpatch warning Signed-off-by:
Kang Minchul <tegongkang@gmail.com> Link: https://lore.kernel.org/r/20220922122310.3379711-5-tegongkang@gmail.comSigned-off-by:
-
Kang Minchul authored
This patch fixes switch and case as linux kernel coding style and amend this error generated by checkpatch: ERROR: switch and case should be at the same indent Signed-off-by:
-
Kang Minchul authored
This patch fixes following warning generated by checkpatch: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by:
-
