- 13 Apr, 2016 40 commits
-
-
Laurent Pinchart authored
Use the pad config structure part of the vsp1_entity to store all active pad selection rectangles. This generalizes the code to operate on pad config structures. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
Add a pad config structure field to the vsp1_entity structure and use it to store all active pad formats. This generalizes the code to operate on pad config structures. Signed-off-by:
-
Laurent Pinchart authored
Turn the custom formats initialization function into a standard pad::init_cfg handler and use it in subdevs instead of initializing formats in the subdev open handler. This makes the subdev open handler empty, so remove it. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Fix a typo that stored the try compose rectangle in the crop rectangle. Signed-off-by:
-
Laurent Pinchart authored
Entities have two operations, a destroy operation stored directly in vsp1_entity and a set_memory operation stored in a vsp1_rwpf_operations structure. Move the two to a more generic vsp1_entity_operations structure that will serve to implement additional operations. Signed-off-by:
-
Laurent Pinchart authored
Don't duplicate the code in every module driver, centralize it in a single place. Signed-off-by:
-
Laurent Pinchart authored
Don't restrict display list usage to the DRM pipeline, use them unconditionally. This prepares the driver to support the request API. Signed-off-by:
-
Laurent Pinchart authored
Display lists can operate in header or headerless mode. The headerless mode is only available on WPF0, to be used with the display engine. All other WPF instances can only use display lists in header mode. Implement support for header mode to prepare for display list usage on WPFs other than 0. Signed-off-by:
-
Laurent Pinchart authored
Commit f7234138 ("v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_config") introduced lots of 80 characters per line violations. Fix them. Signed-off-by:
-
Laurent Pinchart authored
The function can only be called from a s_stream handler as it requires a valid display list context (due to calling vsp1_uds_set_alpha() which writes to module registers). Document the requirement. Signed-off-by:
-
Laurent Pinchart authored
The flag is set but never read, remove it. Signed-off-by:
-
Laurent Pinchart authored
The RPF source memory pointers need to be offset to take the crop rectangle into account. Offsets are computed in the RPF stream start, which can happen (when using the DRM pipeline) after calling the RPF .set_memory() operation that programs the buffer addresses. The .set_memory() operation tries to guard against the problem by skipping programming of the registers when the module isn't streaming. This will however only protect the first use of an RPF in a DRM pipeline, as in all subsequent uses the module streaming flag will be set and the .set_memory() operation will use potentially incorrect offsets. Fix this by allowing the caller to decide whether to program the hardware immediately or just cache the addresses. While at it refactor the memory set code and create a new vsp1_rwpf_set_memory() that cache addresses and calls the .set_memory() operation to apply them to the hardware. As a side effect the driver now writes all three DMA address registers regardless of the number of planes, and initializes unused addresses to zero. Signed-off-by:
-
Laurent Pinchart authored
Those modules were left out of display list integration as they're not used by the DRM pipeline. To prepare for display list support in non-DRM pipelines use the module write API to set registers. Signed-off-by:
-
Laurent Pinchart authored
The control handler set operations don't program the hardware anymore, there's thus no need to call them when starting the stream. Signed-off-by:
-
Laurent Pinchart authored
The datasheet clearly states that all but a few registers can't be modified when the device is running. Programming the intensity parameters in the control set handler is thus prohibited. Program it when starting the module instead. This requires storing the intensity value internally as the module can be started from the frame completion interrupt handler, and accessing control values requires taking a mutex. Signed-off-by:
-
Laurent Pinchart authored
The datasheet clearly states that all but a few registers can't be modified when the device is running. Programming the alpha value in the control set handler is thus prohibited. Program it when starting the module instead. This requires storing the alpha value internally as the module can be started from the frame completion interrupt handler, and accessing control values requires taking a mutex. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/platform/vsp1/vsp1_drm.c:39:6: warning: no previous prototype for 'vsp1_drm_frame_end' [-Wmissing-prototypes] void vsp1_drm_frame_end(struct vsp1_pipeline *pipe) Fixes: ef9621bc ("[media] v4l: vsp1: Store the display list manager in the WPF") Signed-off-by:
-
Laurent Pinchart authored
The datasheet clearly states that all but a few registers can't be modified when the device is running. Programming the background color in the control set handler is thus prohibited. Program it when starting the module instead. This requires storing the background color value internally as the module can be started from the frame completion interrupt handler, and accessing control values requires taking a mutex. Signed-off-by:
-
Laurent Pinchart authored
Each WPF can process display lists independently, move the manager to the WPF to reflect that and prepare for display list support for non-DRM pipelines. Signed-off-by:
-
Laurent Pinchart authored
This clarifies the API and prepares display list support for being used to implement the request API. Signed-off-by:
-
Laurent Pinchart authored
The DRM pipeline, as it runs in automatic restart mode, never sees the pipeline state set to VSP1_PIPELINE_STOPPING or VSP1_PIPELINE_STOPPED when running the frame end interrupt handler. We can thus skip the checks various checks in the handler and return immediately. Similarly the DRM frame end handler calls vsp1_pipeline_run() unnecessarily, as the state there is never VSP1_PIPELINE_STOPPED. Remove the function call and the frame end handler is it's now empty. Signed-off-by:
-
Laurent Pinchart authored
Make sure display list usage is correctly disabled by always setting up the corresponding registers, including when the display list feature isn't used. Signed-off-by:
-
Laurent Pinchart authored
This allows getting rid of the vsp1_device::use_dl field. Signed-off-by:
-
Laurent Pinchart authored
Remove the HAS_LUT flag in the corresponding device information entry. Signed-off-by:
-
Laurent Pinchart authored
Commit 54b5a749 ("[media] v4l: vsp1: Use media entity enumeration interface") wasn't aligned with the driver coding style. Fix it by renaming the rval variable to ret. Furthermore shorten lines by accessing the media_device instance in a more straightforward fashion. Signed-off-by:
-
Laurent Pinchart authored
The VSP1 DRM API is declared in <media/vsp1.h>, not <linux/vsp1.h>. Fix it. This also reverts commit 18922936 ("[media] vsp1_drm.h: add missing prototypes") that added the same declarations in a different header file. Signed-off-by:
-
Laurent Pinchart authored
The functions are void, make the declaration match the definition. Signed-off-by:
-
Laurent Pinchart authored
Add a new subdev operation to initialize a subdev pad config array, and a helper function to allocate and initialize the array. This can be used by bridge drivers to implement try format based on subdev pad operations. Signed-off-by:
Laurent Pinchart <laurent.pinchart@linaro.org> Acked-by:
Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Laurent Pinchart authored
All users of is_media_entity_v4l2_io() (the exynos4-is, omap3isp, davince_vpfe and omap4iss drivers and the v4l2-mc power management code) use the function to check whether entities are video_device instances, either to ensure they can cast the entity to a struct video_device, or to count the number of video nodes users. The purpose of the function is thus to identify whether the media entity instance is an instance of the video_device object, not to check whether it can perform I/O. Rename it accordingly, we will introduce a more specific is_media_entity_v4l2_io() check when needed. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Laurent Pinchart authored
Code that processes media entities can require knowledge of the structure type that embeds a particular media entity instance in order to cast the entity to the proper object type. This needs is shown by the presence of the is_media_entity_v4l2_io and is_media_entity_v4l2_subdev functions. The implementation of those two functions relies on the entity function field, which is both a wrong and an inefficient design, without even mentioning the maintenance issue involved in updating the functions every time a new entity function is added. Fix this by adding add an obj_type field to the media entity structure to carry the information. Signed-off-by:
-
Simon Horman authored
Simply document new compatibility string. As a previous patch adds a generic R-Car Gen2 compatibility string there appears to be no need for a driver updates. By documenting this compat string it may be used in DTSs shipped, for example as part of ROMs. It must be used in conjunction with the Gen2 fallback compat string. At this time there are no known differences between the r8a7792 IP block and that implemented by the driver for the Gen2 fallback compat string. Thus there is no need to update the driver as the use of the Gen2 fallback compat string will activate the correct code in the current driver while leaving the option for r8a7792-specific driver code to be activated in an updated driver should the need arise. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Yoshihiro Kaneko authored
Add fallback compatibility string for R-Car Gen 1 and 2. In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 2 and 3. But beyond that it's unclear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme being adopted for drivers for Renesas SoCs. Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by:
-
Simon Horman authored
A dependency on ARCH_SHMOBILE seems to be the best option for sh_mobile_ceu_camera: * For Super H based SoCs: sh_mobile_ceu is used on SH_AP325RXA, SH_ECOVEC, SH_KFR2R09, SH_MIGOR, and SH_7724_SOLUTION_ENGINE which depend on CPU_SUBTYPE_SH7722, CPU_SUBTYPE_SH7723, or CPU_SUBTYPE_SH7724 which all select ARCH_SHMOBILE. * For ARM Based SoCs: Since the removal of legacy (non-multiplatform) support this driver has not been used by any Renesas ARM based SoCs. The Renesas ARM based SoCs currently select ARCH_SHMOBILE, however, it is planned that this will no longer be the case. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Thanks to Geert Uytterhoeven for analysis and portions of the change log text. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Simon Horman authored
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by:
-
Guennadi Liakhovetski authored
An V4L2_CID_PRIVATE_SHARPNESS macro is defined in the au0828 driver, but never used. Remove it. Signed-off-by:
-
Dan Carpenter authored
Smatch complains that there are some paths where "status" isn't initialized. The code does assume that m5mols_read_u8() can fail so it seems as if Smatch is correct. Let's initialize it to REG_ISO_AUTO which is zero. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The "handled" variable could be uninitialized if the interrupt_service_routine() call back hasn't been implimented or if it has been implemented but doesn't initialize "handled" to zero at the start. For example, adv76xx_isr() only sets "handled" to true. Fixes: 44b153ca ('[media] m5mols: Add ISO sensitivity controls') Signed-off-by:
-
Dan Carpenter authored
If we are doing V4L2_FIELD_NONE then "ret" is used uninitialized. Fixes: 417d2e50 ('[media] media: platform: add VPFE capture driver support for AM437X') Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
gcc-6 points out an obviously silly comparison in vpfe_get_app_input_index(): drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_app_input_index': drivers/media/platform/am437x/am437x-vpfe.c:1709:27: warning: self-comparison always evaluats to true [-Wtautological-compare] client->adapter->nr == client->adapter->nr) { ^~ This was introduced in a slighly incorrect conversion, and it's clear that the comparison was meant to compare the iterator to the current subdev instead, as we do in the line above. Fixes: d3723239 ("[media] media: am437x-vpfe: match the OF node/i2c addr instead of name") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
-
