- 24 Sep, 2018 3 commits
-
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbe uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Reported-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We want to allow NAPI drivers to no longer provide ndo_poll_controller() method, as it has been proven problematic. team driver must not look at its presence, but instead call netpoll_poll_dev() which factorize the needed actions. Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. It seems that all networking drivers that do use NAPI for their TX completions, should not provide a ndo_poll_controller(). NAPI drivers have netpoll support already handled in core networking stack, since netpoll_poll_dev() uses poll_napi(dev) to iterate through registered NAPI contexts for a device. This patch allows netpoll_poll_dev() to process NAPI contexts even for drivers not providing ndo_poll_controller(), allowing for following patches in NAPI drivers. Also we export netpoll_poll_dev() so that it can be called by bonding/team drivers in following patches. Reported-by:
-
- 23 Sep, 2018 2 commits
-
-
David S. Miller authored
Use DECLARE_* not DEFINE_* Fixes: 8360ed67 ("RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats") Signed-off-by:
-
Maciej Żenczykowski authored
So it should not fail with EPERM even though it is no longer implemented... This is a fix for: (userns)$ egrep ^Cap /proc/self/status CapInh: 0000003fffffffff CapPrm: 0000003fffffffff CapEff: 0000003fffffffff CapBnd: 0000003fffffffff CapAmb: 0000003fffffffff (userns)$ tcpdump -i usb_rndis0 tcpdump: WARNING: usb_rndis0: SIOCETHTOOL(ETHTOOL_GUFO) ioctl failed: Operation not permitted Warning: Kernel filter failed: Bad file descriptor tcpdump: can't remove kernel filter: Bad file descriptor With this change it returns EOPNOTSUPP instead of EPERM. See also https://github.com/the-tcpdump-group/libpcap/issues/689 Fixes: 08a00fea "net: Remove references to NETIF_F_UFO from ethtool." Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
- 22 Sep, 2018 12 commits
-
-
Nathan Chancellor authored
Clang warns when two declarations' section attributes don't match. net/rds/ib_stats.c:40:1: warning: section does not match previous declaration [-Wsection] DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats); ^ ./include/linux/percpu-defs.h:142:2: note: expanded from macro 'DEFINE_PER_CPU_SHARED_ALIGNED' DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ ^ ./include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name; \ ^ ./include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ net/rds/ib.h:446:1: note: previous attribute is here DECLARE_PER_CPU(struct rds_ib_statistics, rds_ib_stats); ^ ./include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU' DECLARE_PER_CPU_SECTION(type, name, "") ^ ./include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name ^ ./include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ 1 warning generated. The initial definition was added in commit ec16227e ("RDS/IB: Infiniband transport") and the cache aligned definition was added in commit e6babe4c ("RDS/IB: Stats and sysctls") right after. The definition probably should have been updated in net/rds/ib.h, which is what this patch does. Link: https://github.com/ClangBuiltLinux/linux/issues/114Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86Signed-off-by: -
Dan Carpenter authored
Smatch reports that devlink_dpipe_send_and_alloc_skb() frees the skb on error so this is a double free. We fixed a bunch of these bugs in commit 7fe4d6dc ("devlink: Remove redundant free on error path") but we accidentally overlooked this one. Fixes: d9f9b9a4 ("devlink: Add support for resource abstraction") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
YueHaibing authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by:
-
Wei Yongjun authored
In case of error, the function pci_create_slot() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: a15f2c08 ("PCI: hv: support reporting serial number as slot information") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Jeff Barnhill authored
The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly handle starting/stopping the iteration. The problem is that at some point during the iteration, an overflow is detected and the process is subsequently stopped. The item being shown via seq_printf() when the overflow occurs is not actually shown, though. When start() is subsequently called to resume iterating, it returns the next item, and thus the item that was being processed when the overflow occurred never gets printed. Alter the meaning of the private data member "offset". Currently, when it is not 0 (which only happens at the very beginning), "offset" represents the next hlist item to be printed. After this change, "offset" always represents the current item. This is also consistent with the private data member "bucket", which represents the current bucket, and also the use of "pos" as defined in seq_file.txt: The pos passed to start() will always be either zero, or the most recent pos used in the previous session. Signed-off-by:Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by:
-
Sean Tranchetti authored
netlbl_unlabel_addrinfo_get() assumes that if it finds the NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is not necessarily the case as the current checks in netlbl_unlabel_staticadd() and friends are not sufficent to enforce this. If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR, NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes, these functions will all call netlbl_unlabel_addrinfo_get() which will then attempt dereference NULL when fetching the non-existent NLBL_UNLABEL_A_IPV4MASK attribute: Unable to handle kernel NULL pointer dereference at virtual address 0 Process unlab (pid: 31762, stack limit = 0xffffff80502d8000) Call trace: netlbl_unlabel_addrinfo_get+0x44/0xd8 netlbl_unlabel_staticremovedef+0x98/0xe0 genl_rcv_msg+0x354/0x388 netlink_rcv_skb+0xac/0x118 genl_rcv+0x34/0x48 netlink_unicast+0x158/0x1f0 netlink_sendmsg+0x32c/0x338 sock_sendmsg+0x44/0x60 ___sys_sendmsg+0x1d0/0x2a8 __sys_sendmsg+0x64/0xb4 SyS_sendmsg+0x34/0x4c el0_svc_naked+0x34/0x38 Code: 51001149 7100113f 540000a0 f9401508 (79400108) ---[ end trace f6438a488e737143 ]--- Kernel panic - not syncing: Fatal exception Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
- 21 Sep, 2018 2 commits
-
-
Antoine Tenart authored
When extracting frames from the Ocelot switch, the frame check sequence (FCS) is present at the end of the data extracted. The FCS was put into the sk buffer which introduced some issues (as length related ones), as the FCS shouldn't be part of an Rx sk buffer. This patch fixes the Ocelot switch extraction behaviour by discarding the FCS. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
-
Heiner Kallweit authored
It was reported that chip version 33 (RTL8168E) ends up with 10MBit/Half on a 1GBit link after resuming from S3 (with different link partners). For whatever reason the PHY on this chip doesn't properly start a renegotiation when soft-reset. Explicitly requesting a renegotiation fixes this. Fixes: a2965f12 ("r8169: remove rtl8169_set_speed_xmii") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reported-by:
Neil MacLeod <neil@nmacleod.com> Tested-by:
-
- 20 Sep, 2018 11 commits
-
-
Xin Long authored
When processing pmtu update from an icmp packet, it calls .update_pmtu with sk instead of skb in sctp_transport_update_pmtu. However for sctp, the daddr in the transport might be different from inet_sock->inet_daddr or sk->sk_v6_daddr, which is used to update or create the route cache. The incorrect daddr will cause a different route cache created for the path. So before calling .update_pmtu, inet_sock->inet_daddr/sk->sk_v6_daddr should be updated with the daddr in the transport, and update it back after it's done. The issue has existed since route exceptions introduction. Fixes: 4895c771 ("ipv4: Add FIB nexthop exceptions.") Reported-by: ian.periam@dialogic.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Davide Caratti authored
bnxt offload code currently supports only 'push' and 'pop' operation: let .ndo_setup_tc() return -EOPNOTSUPP if VLAN 'modify' action is configured. Fixes: 2ae7408f ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Sathya Perla <sathya.perla@broadcom.com> Signed-off-by:
-
Johannes Berg authored
The generic netlink family is only initialized during module init, so it should be __ro_after_init like all other generic netlink families. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Petr Machata authored
MC-aware mode was introduced to mlxsw in commit 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") and fixed up later in commit 3a3539cd ("mlxsw: spectrum_buffers: Set up a dedicated pool for BUM traffic"). As the final piece of puzzle, a firmware issue whereby a wrong priority was assigned to BUM traffic was corrected in FW version 13.1703.4. Therefore require this FW version in the driver. Fixes: 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed: Fix series for multi-function mode implementation. The patch series addresses few issues in the switch dependent multi-function modes. Please consider applying it to 'net' tree. ==================== Signed-off-by: -
Sudarsana Reddy Kalluru authored
This patch adds support to configure the DORQ to use vlan-id/priority for roce EDPM. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
In certain multi-function switch dependent modes, firmware adds vlan tag 0 to the untagged frames. This leads to double tagging for the traffic if the dcbx is enabled, which is not the desired behavior. To avoid this, driver needs to set "dcb_dont_add_vlan0" flag. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by:
-
Sudarsana Reddy Kalluru authored
In multi-function mode, driver receives the stag value (outer vlan) for a PF from management FW (MFW). If the stag value is negotiated prior to the driver load, then the stag is not notified to the driver and hence driver will have the invalid stag value. The fix is to request the MFW for STAG value during the driver load time. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by:
-
Antoine Tenart authored
With CONFIG_DMA_API_DEBUG enabled we now get a warning when using the mvneta driver: mvneta d0030000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001165b000] [size=4096 bytes] [mapped as page] [unmapped as single] This is because when using the s/w buffer management, the Rx descriptor buffer is mapped with dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f46 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by:
-
Paolo Abeni authored
the ip6 tunnel xmit ndo assumes that the processed skb always contains an ip[v6] header, but syzbot has found a way to send frames that fall short of this assumption, leading to the following splat: BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 __netdev_start_xmit include/linux/netdevice.h:4066 [inline] netdev_start_xmit include/linux/netdevice.h:4075 [inline] xmit_one net/core/dev.c:3026 [inline] dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042 __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x441819 RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819 RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510 R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 This change addresses the issue adding the needed check before accessing the inner header. The ipv4 side of the issue is apparently there since the ipv4 over ipv6 initial support, and the ipv6 side predates git history. Fixes: c4d3efaf ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com Tested-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== pull request for net: batman-adv 2018-09-19 here are some bugfixes which we would like to see integrated into net. We forgot to bump the version number in the last round for net-next, so the belated patch to do that is included - we hope you can adopt it. This will most likely create a merge conflict later when merging into net-next with this rounds net-next patchset, but net-next should keep the 2018.4 version[1]. [1] resolution: --- a/net/batman-adv/main.h +++ b/net/batman-adv/main.h @@ -25,11 +25,7 @@ #define BATADV_DRIVER_DEVICE "batman-adv" #ifndef BATADV_SOURCE_VERSION -<<<<<<< -#define BATADV_SOURCE_VERSION "2018.3" -======= #define BATADV_SOURCE_VERSION "2018.4" ->>>>>>> #endif /* B.A.T.M.A.N. parameters */ Please pull or let me know of any problem! Here are some batman-adv bugfixes: - Avoid ELP information leak, by Sven Eckelmann - Fix sysfs segfault issues, by Sven Eckelmann (2 patches) - Fix locking when adding entries in various lists, by Sven Eckelmann (5 patches) - Fix refcount if queue_work() fails, by Marek Lindner (2 patches) - Fixup forgotten version bump, by Sven Eckelmann ==================== Signed-off-by:
-
- 19 Sep, 2018 10 commits
-
-
David S. Miller authored
Wei Wang says: ==================== ipv6: fix issues on accessing fib6_metrics The latest fix on the memory leak of fib6_metrics still causes use-after-free. This patch series first revert the previous fix and propose a new fix that is more inline with ipv4 logic and is tested to fix the use-after-free issue reported. ==================== Signed-off-by: -
Wei Wang authored
When dst->_metrics and f6i->fib6_metrics share the same memory, both take reference count on the dst_metrics structure. However, when dst is destroyed, ip6_dst_destroy() only invokes dst_destroy_metrics_generic() which does not take care of READONLY metrics and does not release refcnt. This causes memory leak. Similar to ipv4 logic, the fix is to properly release refcnt and free the memory space pointed by dst->_metrics if refcnt becomes 0. Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Wei Wang authored
This reverts commit e70a3aad. This change causes use-after-free on dst->_metrics. The crash trace looks like this: [ 97.763269] BUG: KASAN: use-after-free in ip6_mtu+0x116/0x140 [ 97.769038] Read of size 4 at addr ffff881781d2cf84 by task svw_NetThreadEv/8801 [ 97.777954] CPU: 76 PID: 8801 Comm: svw_NetThreadEv Not tainted 4.15.0-smp-DEV #11 [ 97.777956] Hardware name: Default string Default string/Indus_QC_02, BIOS 5.46.4 03/29/2018 [ 97.777957] Call Trace: [ 97.777971] [<ffffffff895709db>] dump_stack+0x4d/0x72 [ 97.777985] [<ffffffff881651df>] print_address_description+0x6f/0x260 [ 97.777997] [<ffffffff88165747>] kasan_report+0x257/0x370 [ 97.778001] [<ffffffff894488e6>] ? ip6_mtu+0x116/0x140 [ 97.778004] [<ffffffff881658b9>] __asan_report_load4_noabort+0x19/0x20 [ 97.778008] [<ffffffff894488e6>] ip6_mtu+0x116/0x140 [ 97.778013] [<ffffffff892bb91e>] tcp_current_mss+0x12e/0x280 [ 97.778016] [<ffffffff892bb7f0>] ? tcp_mtu_to_mss+0x2d0/0x2d0 [ 97.778022] [<ffffffff887b45b8>] ? depot_save_stack+0x138/0x4a0 [ 97.778037] [<ffffffff87c38985>] ? __mmdrop+0x145/0x1f0 [ 97.778040] [<ffffffff881643b1>] ? save_stack+0xb1/0xd0 [ 97.778046] [<ffffffff89264c82>] tcp_send_mss+0x22/0x220 [ 97.778059] [<ffffffff89273a49>] tcp_sendmsg_locked+0x4f9/0x39f0 [ 97.778062] [<ffffffff881642b4>] ? kasan_check_write+0x14/0x20 [ 97.778066] [<ffffffff89273550>] ? tcp_sendpage+0x60/0x60 [ 97.778070] [<ffffffff881cb359>] ? rw_copy_check_uvector+0x69/0x280 [ 97.778075] [<ffffffff8873c65f>] ? import_iovec+0x9f/0x430 [ 97.778078] [<ffffffff88164be7>] ? kasan_slab_free+0x87/0xc0 [ 97.778082] [<ffffffff8873c5c0>] ? memzero_page+0x140/0x140 [ 97.778085] [<ffffffff881642b4>] ? kasan_check_write+0x14/0x20 [ 97.778088] [<ffffffff89276f6c>] tcp_sendmsg+0x2c/0x50 [ 97.778092] [<ffffffff89276f6c>] ? tcp_sendmsg+0x2c/0x50 [ 97.778098] [<ffffffff89352d43>] inet_sendmsg+0x103/0x480 [ 97.778102] [<ffffffff89352c40>] ? inet_gso_segment+0x15b0/0x15b0 [ 97.778105] [<ffffffff890294da>] sock_sendmsg+0xba/0xf0 [ 97.778108] [<ffffffff8902ab6a>] ___sys_sendmsg+0x6ca/0x8e0 [ 97.778113] [<ffffffff87dccac1>] ? hrtimer_try_to_cancel+0x71/0x3b0 [ 97.778116] [<ffffffff8902a4a0>] ? copy_msghdr_from_user+0x3d0/0x3d0 [ 97.778119] [<ffffffff881646d1>] ? memset+0x31/0x40 [ 97.778123] [<ffffffff87a0cff5>] ? schedule_hrtimeout_range_clock+0x165/0x380 [ 97.778127] [<ffffffff87a0ce90>] ? hrtimer_nanosleep_restart+0x250/0x250 [ 97.778130] [<ffffffff87dcc700>] ? __hrtimer_init+0x180/0x180 [ 97.778133] [<ffffffff87dd1f82>] ? ktime_get_ts64+0x172/0x200 [ 97.778137] [<ffffffff8822b8ec>] ? __fget_light+0x8c/0x2f0 [ 97.778141] [<ffffffff8902d5c6>] __sys_sendmsg+0xe6/0x190 [ 97.778144] [<ffffffff8902d5c6>] ? __sys_sendmsg+0xe6/0x190 [ 97.778147] [<ffffffff8902d4e0>] ? SyS_shutdown+0x20/0x20 [ 97.778152] [<ffffffff87cd4370>] ? wake_up_q+0xe0/0xe0 [ 97.778155] [<ffffffff8902d670>] ? __sys_sendmsg+0x190/0x190 [ 97.778158] [<ffffffff8902d683>] SyS_sendmsg+0x13/0x20 [ 97.778162] [<ffffffff87a1600c>] do_syscall_64+0x2ac/0x430 [ 97.778166] [<ffffffff87c17515>] ? do_page_fault+0x35/0x3d0 [ 97.778171] [<ffffffff8960131f>] ? page_fault+0x2f/0x50 [ 97.778174] [<ffffffff89600071>] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 97.778177] RIP: 0033:0x7f83fa36000d [ 97.778178] RSP: 002b:00007f83ef9229e0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 97.778180] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f83fa36000d [ 97.778182] RDX: 0000000000004000 RSI: 00007f83ef922f00 RDI: 0000000000000036 [ 97.778183] RBP: 00007f83ef923040 R08: 00007f83ef9231f8 R09: 00007f83ef923168 [ 97.778184] R10: 0000000000000000 R11: 0000000000000293 R12: 00007f83f69c5b40 [ 97.778185] R13: 000000000000001c R14: 0000000000000001 R15: 0000000000004000 [ 97.779684] Allocated by task 5919: [ 97.783185] save_stack+0x46/0xd0 [ 97.783187] kasan_kmalloc+0xad/0xe0 [ 97.783189] kmem_cache_alloc_trace+0xdf/0x580 [ 97.783190] ip6_convert_metrics.isra.79+0x7e/0x190 [ 97.783192] ip6_route_info_create+0x60a/0x2480 [ 97.783193] ip6_route_add+0x1d/0x80 [ 97.783195] inet6_rtm_newroute+0xdd/0xf0 [ 97.783198] rtnetlink_rcv_msg+0x641/0xb10 [ 97.783200] netlink_rcv_skb+0x27b/0x3e0 [ 97.783202] rtnetlink_rcv+0x15/0x20 [ 97.783203] netlink_unicast+0x4be/0x720 [ 97.783204] netlink_sendmsg+0x7bc/0xbf0 [ 97.783205] sock_sendmsg+0xba/0xf0 [ 97.783207] ___sys_sendmsg+0x6ca/0x8e0 [ 97.783208] __sys_sendmsg+0xe6/0x190 [ 97.783209] SyS_sendmsg+0x13/0x20 [ 97.783211] do_syscall_64+0x2ac/0x430 [ 97.783213] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 97.784709] Freed by task 0: [ 97.785056] knetbase: Error: /proc/sys/net/core/txcs_enable does not exist [ 97.794497] save_stack+0x46/0xd0 [ 97.794499] kasan_slab_free+0x71/0xc0 [ 97.794500] kfree+0x7c/0xf0 [ 97.794501] fib6_info_destroy_rcu+0x24f/0x310 [ 97.794504] rcu_process_callbacks+0x38b/0x1730 [ 97.794506] __do_softirq+0x1c8/0x5d0 Reported-by:
John Sperbeck <jsperbeck@google.com> Signed-off-by:
-
Russell King authored
If a network interface is created prior to the SFP socket being available, ethtool can request module information. This unfortunately leads to an oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = (ptrval) [00000008] *pgd=7c400831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1480 Comm: ethtool Not tainted 4.19.0-rc3 #138 Hardware name: Broadcom Northstar Plus SoC PC is at sfp_get_module_info+0x8/0x10 LR is at dev_ethtool+0x218c/0x2afc Fix this by not filling in the network device's SFP bus pointer until SFP is fully bound, thereby avoiding the core calling into the SFP bus code. Fixes: ce0aa27f ("sfp: add sfp-bus to bridge between network devices and sfp cages") Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Antoine Tenart authored
When no Tx IRQ is available, the txq_done() routine (called from tx_done()) shouldn't be called from the polling function, as in such case it is already called in the Tx path thanks to an hrtimer. This mostly occurred when using PPv2.1, as the engine then do not have Tx IRQs. Fixes: edc660fa ("net: mvpp2: replace TX coalescing interrupts with hrtimer") Reported-by:
Stefan Chulski <stefanc@marvell.com> Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: fixes 2018-09-18 here are some fixes in different areas of the smc code for the net tree. ==================== Signed-off-by: -
YueHaibing authored
Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. kernel_sendmsg can return a negative error code. Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
Don't check a listen socket for pending urgent data in smc_poll(). Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Ursula Braun authored
If a linkgroup is terminated abnormally already due to failing LLC CONFIRM LINK or LLC ADD LINK, fallback to TCP is still possible. In this case do not switch to state SMC_PEERABORTWAIT and do not set sk_err. Signed-off-by:
-
Ursula Braun authored
For a failing smc_listen_rdma_finish() smc_listen_decline() is called. If fallback is possible, the new socket is already enqueued to be accepted in smc_listen_decline(). Avoid enqueuing a second time afterwards in this case, otherwise the smc_create_lgr_pending lock is released twice: [ 373.463976] WARNING: bad unlock balance detected! [ 373.463978] 4.18.0-rc7+ #123 Tainted: G O [ 373.463979] ------------------------------------- [ 373.463980] kworker/1:1/30 is trying to release lock (smc_create_lgr_pending) at: [ 373.463990] [<000003ff801205fc>] smc_listen_work+0x22c/0x5d0 [smc] [ 373.463991] but there are no more locks to release! [ 373.463991] other info that might help us debug this: [ 373.463993] 2 locks held by kworker/1:1/30: [ 373.463994] #0: 00000000772cbaed ((wq_completion)"events"){+.+.}, at: process_one_work+0x1ec/0x6b0 [ 373.464000] #1: 000000003ad0894a ((work_completion)(&new_smc->smc_listen_work)){+.+.}, at: process_one_work+0x1ec/0x6b0 [ 373.464003] stack backtrace: [ 373.464005] CPU: 1 PID: 30 Comm: kworker/1:1 Kdump: loaded Tainted: G O 4.18.0-rc7uschi+ #123 [ 373.464007] Hardware name: IBM 2827 H43 738 (LPAR) [ 373.464010] Workqueue: events smc_listen_work [smc] [ 373.464011] Call Trace: [ 373.464015] ([<0000000000114100>] show_stack+0x60/0xd8) [ 373.464019] [<0000000000a8c9bc>] dump_stack+0x9c/0xd8 [ 373.464021] [<00000000001dcaf8>] print_unlock_imbalance_bug+0xf8/0x108 [ 373.464022] [<00000000001e045c>] lock_release+0x114/0x4f8 [ 373.464025] [<0000000000aa87fa>] __mutex_unlock_slowpath+0x4a/0x300 [ 373.464027] [<000003ff801205fc>] smc_listen_work+0x22c/0x5d0 [smc] [ 373.464029] [<0000000000197a68>] process_one_work+0x2a8/0x6b0 [ 373.464030] [<0000000000197ec2>] worker_thread+0x52/0x410 [ 373.464033] [<000000000019fd0e>] kthread+0x15e/0x178 [ 373.464035] [<0000000000aaf58a>] kernel_thread_starter+0x6/0xc [ 373.464052] [<0000000000aaf584>] kernel_thread_starter+0x0/0xc [ 373.464054] INFO: lockdep is turned off. Signed-off-by:
-
