Add extack error messages for -EINVAL errors when enabling bearer,
getting/setting properties for a media/bearer
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethtool: clarify the ethtool FEC interface

Our FEC configuration interface is one of the more confusing.
It also lacks any error checking in the core. This certainly
shows in the varying implementations across the drivers.

Improve the documentation and add most basic checks. Sadly, it's
probably too late now to try to enforce much more uniformity.

Any thoughts & suggestions welcome. Next step is to add netlink
for FEC, then stats.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The definition of the FEC driver interface is quite unclear.
Improve the documentation.

This is based on current driver and user space code, as well
as the discussions about the interface:

RFC v1 (24 Oct 2016): https://lore.kernel.org/netdev/1477363849-36517-1-git-send-email-vidya@cumulusnetworks.com/
 - this version has the autoneg field
 - no active_fec field
 - none vs off confusion is already present

RFC v2 (10 Feb 2017): https://lore.kernel.org/netdev/1486727004-11316-1-git-send-email-vidya@cumulusnetworks.com/
 - autoneg removed
 - active_fec added

v1 (10 Feb 2017): https://lore.kernel.org/netdev/1486751311-42019-1-git-send-email-vidya@cumulusnetworks.com/
 - no changes in the code

v1 (24 Jun 2017):  https://lore.kernel.org/netdev/1498331985-8525-1-git-send-email-roopa@cumulusnetworks.com/
 - include in tree user

v2 (27 Jul 2017): https://lore.kernel.org/netdev/1501199248-24695-1-git-send-email-roopa@cumulusnetworks.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reject NONE on set, this mode means device does not support
FEC so it's a little out of place in the set interface.

This should be safe to do - user space ethtool does not allow
the use of NONE on set. A few drivers treat it the same as OFF,
but none use it instead of OFF.

Similarly reject an empty FEC mask. The common user space tool
will not send such requests and most drivers correctly reject
it already.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct ethtool_fecparam::active_fec is a GET-only field,
all in-tree drivers correctly ignore it on SET. Clear
the field on SET to avoid any confusion. Again, we can't
reject non-zero now since ethtool user space does not
zero-init the param correctly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

struct ethtool_fecparam::reserved is never looked at by the core.
Make sure it's actually 0. Unfortunately we can't return an error
because old ethtool doesn't zero-initialize the structure for SET.
On GET we can be more verbose, there are no in tree (ab)users.

Fix up the kdoc on the structure. Remove the mention of FEC
bypass. Seems like a niche thing to configure in the first
place.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Digging through the mailing list archive @autoneg was part
of the first version of the RFC, this left over comment was
pointed out twice in review but wasn't removed.

The sentence is an exact copy-paste from pauseparam.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/porte/the port/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-03-24

The following pull-request contains BPF updates for your *net-next* tree.

We've added 37 non-merge commits during the last 15 day(s) which contain
a total of 65 files changed, 3200 insertions(+), 738 deletions(-).

The main changes are:

1) Static linking of multiple BPF ELF files, from Andrii.

2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo.

3) Spelling fixes from various folks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge misc fixes from Andrew Morton:
 "14 patches.

  Subsystems affected by this patch series: mm (hugetlb, kasan, gup,
  selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64,
  gcov, and mailmap"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mailmap: update Andrey Konovalov's email address
  mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
  mm: memblock: fix section mismatch warning again
  kfence: make compatible with kmemleak
  gcov: fix clang-11+ support
  ia64: fix format strings for err_inject
  ia64: mca: allocate early mca with GFP_ATOMIC
  squashfs: fix xattr id and id lookup sanity checks
  squashfs: fix inode lookup sanity checks
  z3fold: prevent reclaim/free race for headless pages
  selftests/vm: fix out-of-tree build
  mm/mmu_notifiers: ensure range_end() is paired with range_start()
  kasan: fix per-page tags for non-page_alloc pages
  hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings

Pull rdma fixes from Jason Gunthorpe:
 "Not much going on, just some small bug fixes:

   - Typo causing a regression in mlx5 devx

   - Regression in the recent hns rework causing the HW to get out of
     sync

   - Long-standing cxgb4 adaptor crash when destroying cm ids"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
  RDMA/hns: Fix bug during CMDQ initialization
  RDMA/mlx5: Fix typo in destroy_mkey inbox

Pull mfs fix from Lee Jones:
 "Unconstify editable placeholder structures"

* tag 'mfd-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: intel_quark_i2c_gpio: Revert "Constify static struct resources"

Pull arm64 fixes from Will Deacon:
 "Minor fixes all over, ranging from typos to tests to errata
  workarounds:

   - Fix possible memory hotplug failure with KASLR

   - Fix FFR value in SVE kselftest

   - Fix backtraces reported in /proc/$pid/stack

   - Disable broken CnP implementation on NVIDIA Carmel

   - Typo fixes and ACPI documentation clarification

   - Fix some W=1 warnings"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kernel: disable CNP on Carmel
  arm64/process.c: fix Wmissing-prototypes build warnings
  kselftest/arm64: sve: Do not use non-canonical FFR register value
  arm64: mm: correct the inside linear map range during hotplug check
  arm64: kdump: update ppos when reading elfcorehdr
  arm64: cpuinfo: Fix a typo
  Documentation: arm64/acpi : clarify arm64 support of IBFT
  arm64: stacktrace: don't trace arch_stack_walk()
  arm64: csum: cast to the proper type

Redirect my older email addresses in the git logs.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use my personal email, the @google.com one will stop functioning soon.

Link: https://lkml.kernel.org/r/ead0e9c32a2f70e0bde6f63b3b9470e0ef13d2ee.1616107969.git.andreyknvl@google.comSigned-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel test robot found that __kmap_local_sched_out() was not
correctly skipping the guard pages when DEBUG_KMAP_LOCAL_FORCE_MAP was
set.[1] This was due to DEBUG_HIGHMEM check being used.

Change the configuration check to be correct.

[1] https://lore.kernel.org/lkml/20210304083825.GB17830@xsang-OptiPlex-9020/

Link: https://lkml.kernel.org/r/20210318230657.1497881-1-ira.weiny@intel.com
Fixes: 0e91a0c6 ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Cc: David Sterba <dsterba@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 34dc2efb ("memblock: fix section mismatch warning") marked
memblock_bottom_up() and memblock_set_bottom_up() as __init, but they
could be referenced from non-init functions like
memblock_find_in_range_node() on architectures that enable
CONFIG_ARCH_KEEP_MEMBLOCK.

For such builds kernel test robot reports:

   WARNING: modpost: vmlinux.o(.text+0x74fea4): Section mismatch in reference from the function memblock_find_in_range_node() to the function .init.text:memblock_bottom_up()
   The function memblock_find_in_range_node() references the function __init memblock_bottom_up().
   This is often because memblock_find_in_range_node lacks a __init  annotation or the annotation of memblock_bottom_up is wrong.

Replace __init annotations with __init_memblock annotations so that the
appropriate section will be selected depending on
CONFIG_ARCH_KEEP_MEMBLOCK.

Link: https://lore.kernel.org/lkml/202103160133.UzhgY0wt-lkp@intel.com
Link: https://lkml.kernel.org/r/20210316171347.14084-1-rppt@kernel.org
Fixes: 34dc2efb ("memblock: fix section mismatch warning")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Because memblock allocations are registered with kmemleak, the KFENCE
pool was seen by kmemleak as one large object.  Later allocations
through kfence_alloc() that were registered with kmemleak via
slab_post_alloc_hook() would then overlap and trigger a warning.
Therefore, once the pool is initialized, we can remove (free) it from
kmemleak again, since it should be treated as allocator-internal and be
seen as "free memory".

The second problem is that kmemleak is passed the rounded size, and not
the originally requested size, which is also the size of KFENCE objects.
To avoid kmemleak scanning past the end of an object and trigger a
KFENCE out-of-bounds error, fix the size if it is a KFENCE object.

For simplicity, to avoid a call to kfence_ksize() in
slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK)
guard), just call kfence_ksize() in mm/kmemleak.c:create_object().

Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.comSigned-off-by: Marco Elver <elver@google.com>
Reported-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Luis Henriques <lhenriques@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

LLVM changed the expected function signatures for llvm_gcda_start_file()
and llvm_gcda_emit_function() in the clang-11 release.  Users of
clang-11 or newer may have noticed their kernels failing to boot due to
a panic when enabling CONFIG_GCOV_KERNEL=y +CONFIG_GCOV_PROFILE_ALL=y.
Fix up the function signatures so calling these functions doesn't panic
the kernel.

Link: https://reviews.llvm.org/rGcdd683b516d147925212724b09ec6fb792a40041
Link: https://reviews.llvm.org/rG13a633b438b6500ecad9e4f936ebadf3411d0f44
Link: https://lkml.kernel.org/r/20210312224132.3413602-2-ndesaulniers@google.comSigned-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Prasad Sodagudi <psodagud@quicinc.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>	[5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix warning with %lx / u64 mismatch:

  arch/ia64/kernel/err_inject.c: In function 'show_resources':
  arch/ia64/kernel/err_inject.c:62:22: warning:
    format '%lx' expects argument of type 'long unsigned int',
    but argument 3 has type 'u64' {aka 'long long unsigned int'}
     62 |  return sprintf(buf, "%lx", name[cpu]);   \
        |                      ^~~~~~~

Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.orgSigned-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The sleep warning happens at early boot right at secondary CPU
activation bootup:

    smp: Bringing up secondary CPUs ...
    BUG: sleeping function called from invalid context at mm/page_alloc.c:4942
    in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
    CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99
    ..
    Call Trace:
      show_stack+0x90/0xc0
      dump_stack+0x150/0x1c0
      ___might_sleep+0x1c0/0x2a0
      __might_sleep+0xa0/0x160
      __alloc_pages_nodemask+0x1a0/0x600
      alloc_page_interleave+0x30/0x1c0
      alloc_pages_current+0x2c0/0x340
      __get_free_pages+0x30/0xa0
      ia64_mca_cpu_init+0x2d0/0x3a0
      cpu_init+0x8b0/0x1440
      start_secondary+0x60/0x700
      start_ap+0x750/0x780
    Fixed BSP b0 value from CPU 1

As I understand interrupts are not enabled yet and system has a lot of
memory.  There is little chance to sleep and switch to GFP_ATOMIC should
be a no-op.

Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.orgSigned-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The checks for maximum metadata block size is missing
SQUASHFS_BLOCK_OFFSET (the two byte length count).

Link: https://lkml.kernel.org/r/2069685113.2081245.1614583677427@webmail.123-reg.co.uk
Fixes: f37aa4c7 ("squashfs: add more sanity checks in id lookup")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Sean Nyekjaer <sean@geanix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When mouting a squashfs image created without inode compression it fails
with: "unable to read inode lookup table"

It turns out that the BLOCK_OFFSET is missing when checking the
SQUASHFS_METADATA_SIZE agaist the actual size.

Link: https://lkml.kernel.org/r/20210226092903.1473545-1-sean@geanix.com
Fixes: eabac19e ("squashfs: add more sanity checks in inode lookup")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit ca0246bb ("z3fold: fix possible reclaim races") introduced
the PAGE_CLAIMED flag "to avoid racing on a z3fold 'headless' page
release." By atomically testing and setting the bit in each of
z3fold_free() and z3fold_reclaim_page(), a double-free was avoided.

However, commit dcf5aedb ("z3fold: stricter locking and more careful
reclaim") appears to have unintentionally broken this behavior by moving
the PAGE_CLAIMED check in z3fold_reclaim_page() to after the page lock
gets taken, which only happens for non-headless pages.  For headless
pages, the check is now skipped entirely and races can occur again.

I have observed such a race on my system:

    page:00000000ffbd76b7 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x165316
    flags: 0x2ffff0000000000()
    raw: 02ffff0000000000 ffffea0004535f48 ffff8881d553a170 0000000000000000
    raw: 0000000000000000 0000000000000011 00000000ffffffff 0000000000000000
    page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
    ------------[ cut here ]------------
    kernel BUG at include/linux/mm.h:707!
    invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
    CPU: 2 PID: 291928 Comm: kworker/2:0 Tainted: G    B             5.10.7-arch1-1-kasan #1
    Hardware name: Gigabyte Technology Co., Ltd. H97N-WIFI/H97N-WIFI, BIOS F9b 03/03/2016
    Workqueue: zswap-shrink shrink_worker
    RIP: 0010:__free_pages+0x10a/0x130
    Code: c1 e7 06 48 01 ef 45 85 e4 74 d1 44 89 e6 31 d2 41 83 ec 01 e8 e7 b0 ff ff eb da 48 c7 c6 e0 32 91 88 48 89 ef e8 a6 89 f8 ff <0f> 0b 4c 89 e7 e8 fc 79 07 00 e9 33 ff ff ff 48 89 ef e8 ff 79 07
    RSP: 0000:ffff88819a2ffb98 EFLAGS: 00010296
    RAX: 0000000000000000 RBX: ffffea000594c5a8 RCX: 0000000000000000
    RDX: 1ffffd4000b298b7 RSI: 0000000000000000 RDI: ffffea000594c5b8
    RBP: ffffea000594c580 R08: 000000000000003e R09: ffff8881d5520bbb
    R10: ffffed103aaa4177 R11: 0000000000000001 R12: ffffea000594c5b4
    R13: 0000000000000000 R14: ffff888165316000 R15: ffffea000594c588
    FS:  0000000000000000(0000) GS:ffff8881d5500000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007f7c8c3654d8 CR3: 0000000103f42004 CR4: 00000000001706e0
    Call Trace:
     z3fold_zpool_shrink+0x9b6/0x1240
     shrink_worker+0x35/0x90
     process_one_work+0x70c/0x1210
     worker_thread+0x539/0x1200
     kthread+0x330/0x400
     ret_from_fork+0x22/0x30
    Modules linked in: rfcomm ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ccm algif_aead des_generic libdes ecb algif_skcipher cmac bnep md4 algif_hash af_alg vfat fat intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iwlmvm hid_logitech_hidpp kvm at24 mac80211 snd_hda_codec_realtek iTCO_wdt snd_hda_codec_generic intel_pmc_bxt snd_hda_codec_hdmi ledtrig_audio iTCO_vendor_support mei_wdt mei_hdcp snd_hda_intel snd_intel_dspcfg libarc4 soundwire_intel irqbypass iwlwifi soundwire_generic_allocation rapl soundwire_cadence intel_cstate snd_hda_codec intel_uncore btusb joydev mousedev snd_usb_audio pcspkr btrtl uvcvideo nouveau btbcm i2c_i801 btintel snd_hda_core videobuf2_vmalloc i2c_smbus snd_usbmidi_lib videobuf2_memops bluetooth snd_hwdep soundwire_bus snd_soc_rt5640 videobuf2_v4l2 cfg80211 snd_soc_rl6231 videobuf2_common snd_rawmidi lpc_ich alx videodev mdio snd_seq_device snd_soc_core mc ecdh_generic mxm_wmi mei_me
     hid_logitech_dj wmi snd_compress e1000e ac97_bus mei ttm rfkill snd_pcm_dmaengine ecc snd_pcm snd_timer snd soundcore mac_hid acpi_pad pkcs8_key_parser it87 hwmon_vid crypto_user fuse ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 dm_crypt cbc encrypted_keys trusted tpm rng_core usbhid dm_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper xhci_pci xhci_pci_renesas i915 video intel_gtt i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm agpgart
    ---[ end trace 126d646fc3dc0ad8 ]---

To fix the issue, re-add the earlier test and set in the case where we
have a headless page.

Link: https://lkml.kernel.org/r/c8106dbe6d8390b290cd1d7f873a2942e805349e.1615452048.git.tommyhebb@gmail.com
Fixes: dcf5aedb ("z3fold: stricter locking and more careful reclaim")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Jongseok Kim <ks77sj@gmail.com>
Cc: Snild Dolkow <snild@sony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When building out-of-tree, attempting to make target from $(OUTPUT) directory:

  make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'.

Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.comSigned-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If one or more notifiers fails .invalidate_range_start(), invoke
.invalidate_range_end() for "all" notifiers.  If there are multiple
notifiers, those that did not fail are expecting _start() and _end() to
be paired, e.g.  KVM's mmu_notifier_count would become imbalanced.
Disallow notifiers that can fail _start() from implementing _end() so
that it's unnecessary to either track which notifiers rejected _start(),
or had already succeeded prior to a failed _start().

Note, the existing behavior of calling _start() on all notifiers even
after a previous notifier failed _start() was an unintented "feature".
Make it canon now that the behavior is depended on for correctness.

As of today, the bug is likely benign:

  1. The only caller of the non-blocking notifier is OOM kill.
  2. The only notifiers that can fail _start() are the i915 and Nouveau
     drivers.
  3. The only notifiers that utilize _end() are the SGI UV GRU driver
     and KVM.
  4. The GRU driver will never coincide with the i195/Nouveau drivers.
  5. An imbalanced kvm->mmu_notifier_count only causes soft lockup in the
     _guest_, and the guest is already doomed due to being an OOM victim.

Fix the bug now to play nice with future usage, e.g.  KVM has a
potential use case for blocking memslot updates in KVM while an
invalidation is in-progress, and failure to unblock would result in said
updates being blocked indefinitely and hanging.

Found by inspection.  Verified by adding a second notifier in KVM that
periodically returns -EAGAIN on non-blockable ranges, triggering OOM,
and observing that KVM exits with an elevated notifier count.

Link: https://lkml.kernel.org/r/20210311180057.1582638-1-seanjc@google.com
Fixes: 93065ac7 ("mm, oom: distinguish blockable mode for mmu notifiers")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

To allow performing tag checks on page_alloc addresses obtained via
page_address(), tag-based KASAN modes store tags for page_alloc
allocations in page->flags.

Currently, the default tag value stored in page->flags is 0x00.
Therefore, page_address() returns a 0x00ffff...  address for pages that
were not allocated via page_alloc.

This might cause problems.  A particular case we encountered is a
conflict with KFENCE.  If a KFENCE-allocated slab object is being freed
via kfree(page_address(page) + offset), the address passed to kfree()
will get tagged with 0x00 (as slab pages keep the default per-page
tags).  This leads to is_kfence_address() check failing, and a KFENCE
object ending up in normal slab freelist, which causes memory
corruptions.

This patch changes the way KASAN stores tag in page-flags: they are now
stored xor'ed with 0xff.  This way, KASAN doesn't need to initialize
per-page flags for every created page, which might be slow.

With this change, page_address() returns natively-tagged (with 0xff)
pointers for pages that didn't have tags set explicitly.

This patch fixes the encountered conflict with KFENCE and prevents more
similar issues that can occur in the future.

Link: https://lkml.kernel.org/r/1a41abb11c51b264511d9e71c303bb16d5cb367b.1615475452.git.andreyknvl@google.com
Fixes: 2813b9c0 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current implementation of hugetlb_cgroup for shared mappings could
have different behavior.  Consider the following two scenarios:

 1.Assume initial css reference count of hugetlb_cgroup is 1:
  1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
      count is 2 associated with 1 file_region.
  1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
      count is 3 associated with 2 file_region.
  1.3 coalesce_file_region will coalesce these two file_regions into
      one. So css reference count is 3 associated with 1 file_region
      now.

 2.Assume initial css reference count of hugetlb_cgroup is 1 again:
  2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
      count is 2 associated with 1 file_region.

Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.

The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.

In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.

The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.

[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
  Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com

Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d0 ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.

Fixes: 830662f6 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.comSigned-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

On NVIDIA Carmel cores, CNP behaves differently than it does on standard
ARM cores. On Carmel, if two cores have CNP enabled and share an L2 TLB
entry created by core0 for a specific ASID, a non-shareable TLBI from
core1 may still see the shared entry. On standard ARM cores, that TLBI
will invalidate the shared entry as well.

This causes issues with patchsets that attempt to do local TLBIs based
on cpumasks instead of broadcast TLBIs. Avoid these issues by disabling
CNP support for NVIDIA Carmel cores.
Signed-off-by: Rich Wiley <rwiley@nvidia.com>
Link: https://lore.kernel.org/r/20210324002809.30271-1-rwiley@nvidia.com
[will: Fix pre-existing whitespace issue]
Signed-off-by: Will Deacon <will@kernel.org>

Fix GCC warnings reported when building with "-Wmissing-prototypes":

  arch/arm64/kernel/process.c:261:6: warning: no previous prototype for '__show_regs' [-Wmissing-prototypes]
      261 | void __show_regs(struct pt_regs *regs)
          |      ^~~~~~~~~~~
  arch/arm64/kernel/process.c:307:6: warning: no previous prototype for '__show_regs_alloc_free' [-Wmissing-prototypes]
      307 | void __show_regs_alloc_free(struct pt_regs *regs)
          |      ^~~~~~~~~~~~~~~~~~~~~~
  arch/arm64/kernel/process.c:365:5: warning: no previous prototype for 'arch_dup_task_struct' [-Wmissing-prototypes]
      365 | int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
          |     ^~~~~~~~~~~~~~~~~~~~
  arch/arm64/kernel/process.c:546:41: warning: no previous prototype for '__switch_to' [-Wmissing-prototypes]
      546 | __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev,
          |                                         ^~~~~~~~~~~
  arch/arm64/kernel/process.c:710:25: warning: no previous prototype for 'arm64_preempt_schedule_irq' [-Wmissing-prototypes]
      710 | asmlinkage void __sched arm64_preempt_schedule_irq(void)
          |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/lkml/202103192250.AennsfXM-lkp@intel.comReported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Link: https://lore.kernel.org/r/1616568899-986-1-git-send-email-maninder1.s@samsung.comSigned-off-by: Will Deacon <will@kernel.org>

Pull networking fixes from David Miller:
 "Various fixes, all over:

   1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.

   2) Always store the rx queue mapping in veth, from Maciej
      Fijalkowski.

   3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.

   4) Fix memory leak in octeontx2-af from Colin Ian King.

   5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
      Yonghong Song.

   6) Fix tx ptp stats in mlx5, from Aya Levin.

   7) Check correct ip version in tun decap, fropm Roi Dayan.

   8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.

   9) Work item memork leak in mlx5, from Shay Drory.

  10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.

  11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.

  12) Fix data race in pxa168_eth, from Pavel Andrianov.

  13) Range validate stab in red_check_params(), from Eric Dumazet.

  14) Inherit vlan filtering setting properly in b53 driver, from
      Florian Fainelli.

  15) Fix rtnl locking in igc driver, from Sasha Neftin.

  16) Pause handling fixes in igc driver, from Muhammad Husaini
      Zulkifli.

  17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.

  18) Use after free in qlcnic, from Lv Yunlong.

  19) fix crash in fritzpci mISDN, from Tong Zhang.

  20) Premature rx buffer reuse in igb, from Li RongQing.

  21) Missing termination of ip[a driver message handler arrays, from
      Alex Elder.

  22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
      driver, from Xie He.

  23) Use after free in c_can_pci_remove(), from Tong Zhang.

  24) Uninitialized variable use in nl80211, from Jarod Wilson.

  25) Off by one size calc in bpf verifier, from Piotr Krysiuk.

  26) Use delayed work instead of deferrable for flowtable GC, from
      Yinjun Zhang.

  27) Fix infinite loop in NPC unmap of octeontx2 driver, from
      Hariprasad Kelam.

  28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
      of fifo sizes, from Corentin Labbe.

  29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.

  30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.

  31) Fix psample UAPI breakage, from Ido Schimmel"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
  psample: Fix user API breakage
  math: Export mul_u64_u64_div_u64
  ch_ktls: fix enum-conversion warning
  octeontx2-af: Fix memory leak of object buf
  ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
  net: bridge: don't notify switchdev for local FDB addresses
  net/sched: act_ct: clear post_ct if doing ct_clear
  net: dsa: don't assign an error value to tag_ops
  isdn: capi: fix mismatched prototypes
  net/mlx5: SF, do not use ecpu bit for vhca state processing
  net/mlx5e: Fix division by 0 in mlx5e_select_queue
  net/mlx5e: Fix error path for ethtool set-priv-flag
  net/mlx5e: Offload tuple rewrite for non-CT flows
  net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
  net/mlx5: Add back multicast stats for uplink representor
  net: ipconfig: ic_dev can be NULL in ic_close_devs
  MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
  docs: networking: Fix a typo
  r8169: fix DMA being used after buffer free if WoL is enabled
  net: ipa: fix init header command validation
  ...

With extra warnings enabled, gcc complains that snprintf should not
take the same buffer as source and destination:

drivers/net/ethernet/huawei/hinic/hinic_ethtool.c: In function 'hinic_set_settings_to_hw':
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c:480:9: error: 'snprintf' argument 4 overlaps destination object 'set_link_str' [-Werror=restrict]
  480 |   err = snprintf(set_link_str, SET_LINK_STR_MAX_LEN,
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  481 |           "%sspeed %d ", set_link_str, speed);
      |           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/huawei/hinic/hinic_ethtool.c:464:7: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
  464 |  char set_link_str[SET_LINK_STR_MAX_LEN] = {0};

Rewrite this to avoid the nested sprintf and instead use separate
buffers, which is simpler.

Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to discover whether remote station supports frame preemption,
local station sends verify mPacket and expects response mPacket in
return from the remote station.

So, we add the functions to send and handle event when verify mPacket
and response mPacket are exchanged between the networked stations.

The mechanism to handle different FPE states between local and remote
station (link partner) is implemented using workqueue which starts a
task each time there is some sign of verify & response mPacket exchange
as check in FPE IRQ event. The task retries couple of times to try to
spot the states that both stations are ready to enter FPE ON. This allows
different end points to enable FPE at different time and verify-response
mPacket can happen asynchronously. Ultimately, the task will only turn
FPE ON when local station have both exchange response in both directions.

Thanks to Voon Weifeng for implementing the core functions for detecting
FPE events and send mPacket and phylink related change.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Co-developed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Tan Tee Min <tee.min.tan@intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/Orignal/Original/
s/infered/inferred/
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/sequencially/sequentially/
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

s/beggining/beginning/
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

for ftmac100
Signed-off-by: Zhichao Cai <caizhichao@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: versions and registers

Version 2 of this series adds kernel-doc descriptions for all
members of the ipa_version enumerated type in patch 2.

The original description of the series is below.

					-Alex

This series is sort of a mix of things, generally related to
updating IPA versions and register definitions.

The first patch fixes some version-related tests throughout the code
so the conditions are valid for IPA versions other than the two that
are currently supported.  Support for additional versions is
forthcoming, and this is a preparatory step.

The second patch adds to the set of defined IPA versions, to include
all versions between 3.0 and 4.11.

The next defines an endpoint initialization register that was
previously not being configured.  We now initialize that register
(so that NAT is explicitly disabled) on all AP endpoints.

The fourth adds support for an extra bit in a field in a register,
which is present starting at IPA v4.5.

The last two are sort of standalone.  One just moves a function
definition and makes it private.  The other increases the number of
GSI channels and events supported by the driver, sufficient for IPA
v4.5.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>