- 06 Oct, 2019 3 commits
-
-
Harshad Shirwadkar authored
scale_up wakes up waiters after scaling up. But after scaling max, it should not wake up more waiters as waiters will not have anything to do. This patch fixes this by making scale_up (and also scale_down) return when threshold is reached. This bug causes increased fdatasync latency when fdatasync and dd conv=sync are performed in parallel on 4.19 compared to 4.14. This bug was introduced during refactoring of blk-wbt code. Fixes: a7905043 ("blk-rq-qos: refactor out common elements of blk-wbt") Cc: stable@vger.kernel.org Cc: Josef Bacik <jbacik@fb.com> Signed-off-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Mika Westerberg authored
This reverts commit 85fbd722. The commit was added as a quick band-aid for a hang that happened when a block device was removed during system suspend. Now that bdi_wq is not freezable anymore the hang should not be possible and we can get rid of this hack by reverting it. Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Mika Westerberg authored
A removable block device, such as NVMe or SSD connected over Thunderbolt can be hot-removed any time including when the system is suspended. When device is hot-removed during suspend and the system gets resumed, kernel first resumes devices and then thaws the userspace including freezable workqueues. What happens in that case is that the NVMe driver notices that the device is unplugged and removes it from the system. This ends up calling bdi_unregister() for the gendisk which then schedules wb_workfn() to be run one more time. However, since the bdi_wq is still frozen flush_delayed_work() call in wb_shutdown() blocks forever halting system resume process. User sees this as hang as nothing is happening anymore. Triggering sysrq-w reveals this: Workqueue: nvme-wq nvme_remove_dead_ctrl_work [nvme] Call Trace: ? __schedule+0x2c5/0x630 ? wait_for_completion+0xa4/0x120 schedule+0x3e/0xc0 schedule_timeout+0x1c9/0x320 ? resched_curr+0x1f/0xd0 ? wait_for_completion+0xa4/0x120 wait_for_completion+0xc3/0x120 ? wake_up_q+0x60/0x60 __flush_work+0x131/0x1e0 ? flush_workqueue_prep_pwqs+0x130/0x130 bdi_unregister+0xb9/0x130 del_gendisk+0x2d2/0x2e0 nvme_ns_remove+0xed/0x110 [nvme_core] nvme_remove_namespaces+0x96/0xd0 [nvme_core] nvme_remove+0x5b/0x160 [nvme] pci_device_remove+0x36/0x90 device_release_driver_internal+0xdf/0x1c0 nvme_remove_dead_ctrl_work+0x14/0x30 [nvme] process_one_work+0x1c2/0x3f0 worker_thread+0x48/0x3e0 kthread+0x100/0x140 ? current_work+0x30/0x30 ? kthread_park+0x80/0x80 ret_from_fork+0x35/0x40 This is not limited to NVMes so exactly same issue can be reproduced by hot-removing SSD (over Thunderbolt) while the system is suspended. Prevent this from happening by removing WQ_FREEZABLE from bdi_wq. Reported-by:
AceLan Kao <acelan.kao@canonical.com> Link: https://marc.info/?l=linux-kernel&m=138695698516487 Link: https://bugzilla.kernel.org/show_bug.cgi?id=204385 Link: https://lore.kernel.org/lkml/20191002122136.GD2819@lahna.fi.intel.com/#tAcked-by:
-
- 04 Oct, 2019 1 commit
-
-
Pavel Begunkov authored
io_queue_link_head() accepts @force_nonblock flag, but io_ring_submit() passes something opposite. Fixes: c5766668 ("io_uring: optimize submit_and_wait API") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
-
- 03 Oct, 2019 3 commits
-
-
Randy Dunlap authored
sparse warns about incorrect type when using __be64 data. It is not being converted to CPU-endian but it should be. Fixes these sparse warnings: ../block/sed-opal.c:375:20: warning: incorrect type in assignment (different base types) ../block/sed-opal.c:375:20: expected unsigned long long [usertype] align ../block/sed-opal.c:375:20: got restricted __be64 const [usertype] alignment_granularity ../block/sed-opal.c:376:25: warning: incorrect type in assignment (different base types) ../block/sed-opal.c:376:25: expected unsigned long long [usertype] lowest_lba ../block/sed-opal.c:376:25: got restricted __be64 const [usertype] lowest_aligned_lba Fixes: 455a7b23 ("block: Add Sed-opal library") Cc: Scott Bauer <scott.bauer@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: linux-block@vger.kernel.org Reviewed-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Fix sparse warning: (missing '=') ../block/sed-opal.c:133:17: warning: obsolete array initializer, use C99 syntax Fixes: ff91064e ("block: sed-opal: check size of shadow mbr") Cc: linux-block@vger.kernel.org Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Cc: David Kozub <zub@linux.fjfi.cvut.cz> Reviewed-by:
Scott Bauer <sbauer@plzdonthack.me> Reviewed-by:
Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by:
-
Masahiro Yamada authored
Add a header include guard just in case. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
- 01 Oct, 2019 4 commits
-
-
Stefan Haberland authored
This reverts commit 7e64db15. The thin provisioning feature introduces an IOCTL and the discard support to allow userspace tools and filesystems to release unused and previously allocated space respectively. During some internal performance improvements and further tests, the release of allocated space revealed some issues that may lead to data corruption in some configurations when filesystems are mounted with discard support enabled. While we're working on a fix and trying to clarify the situation, this commit reverts the discard support for ESE volumes to prevent potential data corruption. Cc: <stable@vger.kernel.org> # 5.3 Signed-off-by:
Stefan Haberland <sth@linux.ibm.com> Signed-off-by:
-
Jan Höppner authored
It is possible that the CCW commands for reading volume and extent pool information are not supported, either by the storage server (for dedicated DASDs) or by z/VM (for virtual devices, such as MDISKs). As a command reject will occur in such a case, the current error handling leads to a failing online processing and thus the DASD can't be used at all. Since the data being read is not essential for an fully operational DASD, the error handling can be removed. Information about the failing command is sent to the s390dbf debug feature. Fixes: c729696b ("s390/dasd: Recognise data for ESE volumes") Cc: <stable@vger.kernel.org> # 5.3 Reported-by:
Frank Heimes <frank.heimes@canonical.com> Signed-off-by:
Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
All system calls use struct __kernel_timespec instead of the old struct timespec, but this one was just added with the old-style ABI. Change it now to enforce the use of __kernel_timespec, avoiding ABI confusion and the need for compat handlers on 32-bit architectures. Any user space caller will have to use __kernel_timespec now, but this is unambiguous and works for any C library regardless of the time_t definition. A nicer way to specify the timeout would have been a less ambiguous 64-bit nanosecond value, but I suppose it's too late now to change that as this would impact both 32-bit and 64-bit users. Fixes: 5262f567 ("io_uring: IORING_OP_TIMEOUT support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Martijn Coenen authored
The loop driver assumes that if the passed in fd is opened with O_DIRECT, the caller wants to use direct I/O on the loop device. However, if the underlying block device has a different block size than the loop block queue, direct I/O can't be enabled. Instead of requiring userspace to manually change the blocksize and re-enable direct I/O, just change the queue block sizes to match, as well as the io_min size. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martijn Coenen <maco@android.com> Signed-off-by:
-
- 27 Sep, 2019 6 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe changes from Sagi: "This set consists of various fixes and cleanups: - controller removal race fix from Balbir - quirk additions from Gabriel and Jian-Hong - nvme-pci power state save fix from Mario - Add 64bit user commands (for 64bit registers) from Marta - nvme-rdma/nvme-tcp fixes from Max, Mark and Me - Minor cleanups and nits from James, Dan and John" * 'nvme-5.4' of git://git.infradead.org/nvme: nvme-rdma: fix possible use-after-free in connect timeout nvme: Move ctrl sqsize to generic space nvme: Add ctrl attributes for queue_count and sqsize nvme: allow 64-bit results in passthru commands nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T nvmet-tcp: remove superflous check on request sgl Added QUIRKs for ADATA XPG SX8200 Pro 512GB nvme-rdma: Fix max_hw_sectors calculation nvme: fix an error code in nvme_init_subsystem() nvme-pci: Save PCI state before putting drive into deepest state nvme-tcp: fix wrong stop condition in io_work nvme-pci: Fix a race in controller removal nvmet: change ppl to lpp
-
Ming Lei authored
Some HDD drive may expose multiple hardware queues, such as MegraRaid. Let's apply the normal plugging for such devices because sequential IO may benefit a lot from plug merging. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Dave Chinner <dchinner@redhat.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Ming Lei authored
If a device is using multiple queues, the IO scheduler may be bypassed. This may hurt performance for some slow MQ devices, and it also breaks zoned devices which depend on mq-deadline for respecting the write order in one zone. Don't bypass io scheduler if we have one setup. This patch can double sequential write performance basically on MQ scsi_debug when mq-deadline is applied. Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Dave Chinner <dchinner@redhat.com> Reviewed-by:
Javier González <javier@javigon.com> Reviewed-by:
-
Sagi Grimberg authored
If the connect times out, we may have already destroyed the queue in the timeout handler, so test if the queue is still allocated in the connect error handler. Reported-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me>
-
Yufen Yu authored
We got a null pointer deference BUG_ON in blk_mq_rq_timed_out() as following: [ 108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040 [ 108.827059] PGD 0 P4D 0 [ 108.827313] Oops: 0000 [#1] SMP PTI [ 108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431 [ 108.829503] Workqueue: kblockd blk_mq_timeout_work [ 108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330 [ 108.838191] Call Trace: [ 108.838406] bt_iter+0x74/0x80 [ 108.838665] blk_mq_queue_tag_busy_iter+0x204/0x450 [ 108.839074] ? __switch_to_asm+0x34/0x70 [ 108.839405] ? blk_mq_stop_hw_queue+0x40/0x40 [ 108.839823] ? blk_mq_stop_hw_queue+0x40/0x40 [ 108.840273] ? syscall_return_via_sysret+0xf/0x7f [ 108.840732] blk_mq_timeout_work+0x74/0x200 [ 108.841151] process_one_work+0x297/0x680 [ 108.841550] worker_thread+0x29c/0x6f0 [ 108.841926] ? rescuer_thread+0x580/0x580 [ 108.842344] kthread+0x16a/0x1a0 [ 108.842666] ? kthread_flush_work+0x170/0x170 [ 108.843100] ret_from_fork+0x35/0x40 The bug is caused by the race between timeout handle and completion for flush request. When timeout handle function blk_mq_rq_timed_out() try to read 'req->q->mq_ops', the 'req' have completed and reinitiated by next flush request, which would call blk_rq_init() to clear 'req' as 0. After commit 12f5b931 ("blk-mq: Remove generation seqeunce"), normal requests lifetime are protected by refcount. Until 'rq->ref' drop to zero, the request can really be free. Thus, these requests cannot been reused before timeout handle finish. However, flush request has defined .end_io and rq->end_io() is still called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq' can be reused by the next flush request handle, resulting in null pointer deference BUG ON. We fix this problem by covering flush request with 'rq->ref'. If the refcount is not zero, flush_end_io() return and wait the last holder recall it. To record the request status, we add a new entry 'rq_status', which will be used in flush_end_io(). Cc: Christoph Hellwig <hch@infradead.org> Cc: Keith Busch <keith.busch@intel.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: stable@vger.kernel.org # v4.18+ Reviewed-by:
Bob Liu <bob.liu@oracle.com> Signed-off-by:
Yufen Yu <yuyufen@huawei.com> ------- v2: - move rq_status from struct request to struct blk_flush_queue v3: - remove unnecessary '{}' pair. v4: - let spinlock to protect 'fq->rq_status' v5: - move rq_status after flush_running_idx member of struct blk_flush_queue Signed-off-by:
-
Yufen Yu authored
We have updated limits after calling wbt_set_min_lat(). No need to update again. Reviewed-by:
-
- 26 Sep, 2019 6 commits
-
-
Keith Busch authored
This isn't specific to fabrics. Signed-off-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Tejun Heo authored
The default hard disk param sets latency targets at 50ms. As the default target percentiles are zero, these don't directly regulate vrate; however, they're still used to calculate the period length - 100ms in this case. This is excessively low. A SATA drive with QD32 saturated with random IOs can easily reach avg completion latency of several hundred msecs. A period duration which is substantially lower than avg completion latency can lead to wildly fluctuating vrate. Let's bump up the default latency targets to 250ms so that the period duration is sufficiently long. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
Some IOs may span multiple periods. As latencies are collected on completion, the inbetween periods won't register them and may incorrectly decide to increase vrate. nr_lagging tracks these IOs to avoid those situations. Currently, whenever there are IOs which are spanning from the previous period, busy_level is reset to 0 if negative thus suppressing vrate increase. This has the following two problems. * When latency target percentiles aren't set, vrate adjustment should only be governed by queue depth depletion; however, the current code keeps nr_lagging active which pulls in latency results and can keep down vrate unexpectedly. * When lagging condition is detected, it resets the entire negative busy_level. This turned out to be way too aggressive on some devices which sometimes experience extended latencies on a small subset of commands. In addition, a lagging IO will be accounted as latency target miss on completion anyway and resetting busy_level amplifies its impact unnecessarily. This patch fixes the above two problems by disabling nr_lagging counting when latency target percentiles aren't set and blocking vrate increases when there are lagging IOs while leaving busy_level as-is. Signed-off-by:
-
Tejun Heo authored
vrate_adj tracepoint traces vrate changes; however, it does so only when busy_level is non-zero. busy_level turning to zero can sometimes be as interesting an event. This patch also enables vrate_adj tracepoint on other vrate related events - busy_level changes and non-zero nr_lagging. Signed-off-by:
-
Ming Lei authored
cecf5d87 ("block: split .sysfs_lock into two locks") starts to release & acquire sysfs_lock before registering/un-registering elevator queue during switching elevator for avoiding potential deadlock from showing & storing 'queue/iosched' attributes and removing elevator's kobject. Turns out there isn't such deadlock because 'q->sysfs_lock' isn't required in .show & .store of queue/iosched's attributes, and just elevator's sysfs lock is acquired in elv_iosched_store() and elv_iosched_show(). So it is safe to hold queue's sysfs lock when registering/un-registering elevator queue. The biggest issue is that commit cecf5d87 assumes that concurrent write on 'queue/scheduler' can't happen. However, this assumption isn't true, because kernfs_fop_write() only guarantees that concurrent write aren't called on the same open file, but the write could be from different open on the file. So we can't release & re-acquire queue's sysfs lock during switching elevator, otherwise use-after-free on elevator could be triggered. Fixes the issue by not releasing queue's sysfs lock during switching elevator. Fixes: cecf5d87 ("block: split .sysfs_lock into two locks") Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Ming Lei authored
Commit c48dac13 ("block: don't hold q->sysfs_lock in elevator_init_mq") removes q->sysfs_lock from elevator_init_mq(), but forgot to deal with lockdep_assert_held() called in blk_mq_sched_free_requests() which is run in failure path of elevator_init_mq(). blk_mq_sched_free_requests() is called in the following 3 functions: elevator_init_mq() elevator_exit() blk_cleanup_queue() In blk_cleanup_queue(), blk_mq_sched_free_requests() is followed exactly by 'mutex_lock(&q->sysfs_lock)'. So moving the lockdep_assert_held() from blk_mq_sched_free_requests() into elevator_exit() for fixing the report by syzbot. Reported-by: syzbot+da3b7677bb913dc1b737@syzkaller.appspotmail.com Fixed: c48dac13 ("block: don't hold q->sysfs_lock in elevator_init_mq") Reviewed-by:
-
- 25 Sep, 2019 13 commits
-
-
James Smart authored
Current controller interrogation requires a lot of guesswork on how many io queues were created and what the io sq size is. The numbers are dependent upon core/fabric defaults, connect arguments, and target responses. Add sysfs attributes for queue_count and sqsize. Signed-off-by:
James Smart <jsmart2021@gmail.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Marta Rybczynska authored
It is not possible to get 64-bit results from the passthru commands, what prevents from getting for the Capabilities (CAP) property value. As a result, it is not possible to implement IOL's NVMe Conformance test 4.3 Case 1 for Fabrics targets [1] (page 123). This issue has been already discussed [2], but without a solution. This patch solves the problem by adding new ioctls with a new passthru structure, including 64-bit results. The older ioctls stay unchanged. [1] https://www.iol.unh.edu/sites/default/files/testsuites/nvme/UNH-IOL_NVMe_Conformance_Test_Suite_v11.0.pdf [2] http://lists.infradead.org/pipermail/linux-nvme/2018-June/018791.htmlSigned-off-by:
Marta Rybczynska <marta.rybczynska@kalray.eu> Reviewed-by:
-
Jian-Hong Pan authored
Kingston NVME SSD with firmware version E8FK11.T has no interrupt after resume with actions related to suspend to idle. This patch applied NVME_QUIRK_SIMPLE_SUSPEND quirk to fix this issue. Fixes: d916b1be ("nvme-pci: use host managed power state for suspend") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204887Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
-
Sagi Grimberg authored
Now that sgl_free is null safe, drop the superflous check. Signed-off-by: -
Gabriel Craciunescu authored
Booting with default_ps_max_latency_us >6000 makes the device fail. Also SUBNQN is NULL and gives a warning on each boot/resume. $ nvme id-ctrl /dev/nvme0 | grep ^subnqn subnqn : (null) I use this device with an Acer Nitro 5 (AN515-43-R8BF) Laptop. To be sure is not a Laptop issue only, I tested the device on my server board with the same results. ( with 2x,4x link on the board and 4x link on a PCI-E card ). Signed-off-by:
Gabriel Craciunescu <nix.or.die@gmail.com> Reviewed-by:
-
Max Gurtovoy authored
By default, the NVMe/RDMA driver should support max io_size of 1MiB (or upto the maximum supported size by the HCA). Currently, one will see that /sys/class/block/<bdev>/queue/max_hw_sectors_kb is 1020 instead of 1024. A non power of 2 value can cause performance degradation due to unnecessary splitting of IO requests and unoptimized allocation units. The number of pages per MR has been fixed here, so there is no longer any need to reduce max_sectors by 1. Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
"ret" should be a negative error code here, but it's either success or possibly uninitialized. Fixes: 32fd90c4 ("nvme: change locking for the per-subsystem controller list") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Mario Limonciello authored
The action of saving the PCI state will cause numerous PCI configuration space reads which depending upon the vendor implementation may cause the drive to exit the deepest NVMe state. In these cases ASPM will typically resolve the PCIe link state and APST may resolve the NVMe power state. However it has also been observed that this register access after quiesced will cause PC10 failure on some device combinations. To resolve this, move the PCI state saving to before SetFeatures has been called. This has been proven to resolve the issue across a 5000 sample test on previously failing disk/system combinations. Signed-off-by:
Mario Limonciello <mario.limonciello@dell.com> Reviewed-by:
-
Wunderlich, Mark authored
Allow the do/while statement to continue if current time is not after the proposed time 'deadline'. Intent is to allow loop to proceed for a specific time period. Currently the loop, as coded, will exit after first pass. Signed-off-by:
Mark Wunderlich <mark.wunderlich@intel.com> Reviewed-by:
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "The highlights are: - automatic recovery of a blacklisted filesystem session (Zheng Yan). This is disabled by default and can be enabled by mounting with the new "recover_session=clean" option. - serialize buffered reads and O_DIRECT writes (Jeff Layton). Care is taken to avoid serializing O_DIRECT reads and writes with each other, this is based on the exclusion scheme from NFS. - handle large osdmaps better in the face of fragmented memory (myself) - don't limit what security.* xattrs can be get or set (Jeff Layton). We were overly restrictive here, unnecessarily preventing things like file capability sets stored in security.capability from working. - allow copy_file_range() within the same inode and across different filesystems within the same cluster (Luis Henriques)" * tag 'ceph-for-5.4-rc1' of git://github.com/ceph/ceph-client: (41 commits) ceph: call ceph_mdsc_destroy from destroy_fs_client libceph: use ceph_kvmalloc() for osdmap arrays libceph: avoid a __vmalloc() deadlock in ceph_kvmalloc() ceph: allow object copies across different filesystems in the same cluster ceph: include ceph_debug.h in cache.c ceph: move static keyword to the front of declarations rbd: pull rbd_img_request_create() dout out into the callers ceph: reconnect connection if session hang in opening state libceph: drop unused con parameter of calc_target() ceph: use release_pages() directly rbd: fix response length parameter for encoded strings ceph: allow arbitrary security.* xattrs ceph: only set CEPH_I_SEC_INITED if we got a MAC label ceph: turn ceph_security_invalidate_secctx into static inline ceph: add buffered/direct exclusionary locking for reads and writes libceph: handle OSD op ceph_pagelist_append() errors ceph: don't return a value from void function ceph: don't freeze during write page faults ceph: update the mtime when truncating up ceph: fix indentation in __get_snap_name() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse updates from Miklos Szeredi: - Continue separating the transport (user/kernel communication) and the filesystem layers of fuse. Getting rid of most layering violations will allow for easier cleanup and optimization later on. - Prepare for the addition of the virtio-fs filesystem. The actual filesystem will be introduced by a separate pull request. - Convert to new mount API. - Various fixes, optimizations and cleanups. * tag 'fuse-update-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (55 commits) fuse: Make fuse_args_to_req static fuse: fix memleak in cuse_channel_open fuse: fix beyond-end-of-page access in fuse_parse_cache() fuse: unexport fuse_put_request fuse: kmemcg account fs data fuse: on 64-bit store time in d_fsdata directly fuse: fix missing unlock_page in fuse_writepage() fuse: reserve byteswapped init opcodes fuse: allow skipping control interface and forced unmount fuse: dissociate DESTROY from fuseblk fuse: delete dentry if timeout is zero fuse: separate fuse device allocation and installation in fuse_conn fuse: add fuse_iqueue_ops callbacks fuse: extract fuse_fill_super_common() fuse: export fuse_dequeue_forget() function fuse: export fuse_get_unique() fuse: export fuse_send_init_request() fuse: export fuse_len_args() fuse: export fuse_end_request() fuse: fix request limit ...
-
git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen. * tag 'tpmdd-next-20190925' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: Wrap the buffer from the caller to tpm_buf in tpm_send() MAINTAINERS: keys: Update path to trusted.h KEYS: trusted: correctly initialize digests and fix locking issue selftests/tpm2: Add log and *.pyc to .gitignore selftests/tpm2: Add the missing TEST_FILES assignment
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap updates from Darrick Wong: "After last week's failed pull request attempt, I scuttled everything in the branch except for the directio endio api changes, which were trivial. Everything else will simply have to wait for the next cycle. Summary: - Report both io errors and short io results to the directio endio handler. - Allow directio callers to pass an ops structure to iomap_dio_rw" * tag 'iomap-5.4-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: move the iomap_dio_rw ->end_io callback into a structure iomap: split size and error for iomap_dio_rw ->end_io
-
- 24 Sep, 2019 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few small remaining wrap-up for this merge window. Most of patches are device-specific (HD-audio and USB-audio quirks, FireWire, pcm316a, fsl, rsnd, Atmel, and TI fixes), while there is a simple fix (actually two commits) for ASoC core" * tag 'sound-fix-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add DSD support for EVGA NU Audio ALSA: hda - Add laptop imic fixup for ASUS M9V laptop ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies ASoC: pcm3168a: The codec does not support S32_LE ASoC: core: use list_del_init and move it back to soc_cleanup_component ALSA: hda/realtek - PCI quirk for Medion E4254 ALSA: hda - Apply AMD controller workaround for Raven platform ASoC: rsnd: do error check after rsnd_channel_normalization() ASoC: atmel_ssc_dai: Remove wrong spinlock usage ASoC: core: delete component->card_list in soc_remove_component only ASoC: fsl_sai: Fix noise when using EDMA ALSA: usb-audio: Add Hiby device family to quirks for native DSD support ALSA: hda/realtek - Fix alienware headset mic ALSA: dice: fix wrong packet parameter for Alesis iO26
-
Jarkko Sakkinen authored
tpm_send() does not give anymore the result back to the caller. This would require another memcpy(), which kind of tells that the whole approach is somewhat broken. Instead, as Mimi suggested, this commit just wraps the data to the tpm_buf, and thus the result will not go to the garbage. Obviously this assumes from the caller that it passes large enough buffer, which makes the whole API somewhat broken because it could be different size than @buflen but since trusted keys is the only module using this API right now I think that this fix is sufficient for the moment. In the near future the plan is to replace the parameters with a tpm_buf created by the caller. Reported-by:
Mimi Zohar <zohar@linux.ibm.com> Suggested-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com>
-
Denis Efremov authored
Update MAINTAINERS record to reflect that trusted.h was moved to a different directory in commit 22447981 ("KEYS: Move trusted.h to include/keys [ver #2]"). Cc: Denis Kenzior <denkenz@gmail.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: linux-integrity@vger.kernel.org Signed-off-by:
Denis Efremov <efremov@linux.com> Reviewed-by:
-
