- 04 Apr, 2015 9 commits
-
-
David S. Miller authored
Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Pass the nf_hook_state all the way down into the hook functions themselves. Signed-off-by: -
David S. Miller authored
That way we don't have to reinstantiate another nf_hook_state on the stack of the nf_reinject() path. Signed-off-by: -
David S. Miller authored
Instead of passing a large number of arguments down into the nf_hook() entry points, create a structure which carries this state down through the hook processing layers. This makes is so that if we want to change the types or signatures of any of these pieces of state, there are less places that need to be changed. Signed-off-by:
-
- 03 Apr, 2015 26 commits
-
-
Herbert Xu authored
Now that resizing is completely automatic, we need to remove the max_size setting or the test will fail. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
David S. Miller authored
Stas Sergeev says: ==================== mvneta: SGMII-based in-band link state signaling Currently the fixed-link DT binding is pre-configured and cannot be changed in run-time. This means the cable unplug events are not being detected, and the link parameters can't be negotiated. The following patches are needed when mvneta is used in fixed-link mode (without MDIO). They add an API to fixed_phy that allows to update status, and use that API in the mvneta driver when parsing the SGMII in-band status. There is also another implementation that doesn't add any API and does everything in mvneta driver locally: https://lkml.org/lkml/2015/3/31/327 I'll let people decide which approach is better. No strong opinion on my side. ==================== Signed-off-by:
Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by:
-
Stas Sergeev authored
When MDIO bus is unavailable (common setup for SGMII), the in-band signaling must be used to correctly track link state. This patch enables the in-band status delivery for link state changes, namely: - link up/down - link speed - duplex full/half fixed_phy_update_state() is used to update phy status. CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by:
-
Stas Sergeev authored
Currently fixed_phy uses a callback to periodically poll the link state. This patch adds the fixed_phy_update_state() API. It solves the following problems: - On link state interrupt, MAC driver can't update status. Instead it needs to provide the callback to periodically query the HW about the link state. It is more efficient to update status after interrupt. - The callback needs to be unregistered before phy_disconnect(), or otherwise it will be called with net_dev==NULL. phy_disconnect() does not have enough info to unregister the callback automatically. - The callback needs to be registered before of_phy_connect() to avoid running with outdated state, but of_phy_connect() returns the phy_device pointer, which is needed to register the callback. Registering it before of_phy_connect() will therefore require a hack to get the pointer earlier. Overall, this addition makes the subsequent patch that implements SGMII link status for mvneta, much cleaner. CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by:
-
Daniel Borkmann authored
This adds the ability to read out the skb->priority from an eBPF program, so that it can be taken into account from a tc filter or action for the use-case where the priority is not being used to directly override the filter classification in a qdisc, but to tag traffic otherwise for the classifier; the priority can be assigned from various places incl. user space, in future we may also mangle it from an eBPF program. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Alexander Duyck authored
Looking over the implementation for jhash2 and comparing it to jhash_3words I realized that the two hashes were in fact very different. Doing a bit of digging led me to "The new jhash implementation" in which lookup2 was supposed to have been replaced with lookup3. In reviewing the patch I noticed that jhash2 had originally initialized a and b to JHASH_GOLDENRATIO and c to initval, but after the patch a, b, and c were initialized to initval + (length << 2) + JHASH_INITVAL. However the changes in jhash_3words simply replaced the initialization of a and b with JHASH_INITVAL. This change corrects what I believe was an oversight so that a, b, and c in jhash_3words all have the same value added consisting of initval + (length << 2) + JHASH_INITVAL so that jhash2 and jhash_3words will now produce the same hash result given the same inputs. Fixes: 60d509c8 ("The new jhash implementation") Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-04-03 This series contains updates to i40e and i40evf only. Anjali provides a fix for verifying outer UDP receive checksum. Also adds helpful information to display when figuring out the cause of HMC errors. Mitch provides a fix to prevent a malicious or buggy VF driver from sending an invalid index into the VSI array which could panic the host. Cleans up the code where a function was moved, but the message did not follow. Adds protection to the VLAN filter list, same as the MAC filter list, to protect from corruption if the watchdog happens to run at the same time as a VLAN filter is being added/deleted. Jesse changes several memcpy() statements to struct assignments which are type safe and preferable. Fixed a bug when skb allocation fails, where we should not continue using the skb pointer. Also fixed a void function in FCoE which should not be returning anything. Greg fixes both i40e and i40evf to set the Ethernet protocol correctly when transmit VLAN offloads are disabled. Shannon fixes up VLAN messages when ports are added or removed, which were giving bogus index info. Also aligned the message text style with other messages in the driver. ==================== Signed-off-by: -
Rusty Russell authored
This paraphrases DaveM (and steals some of his words) explaining why a device shouldn't return NETDEV_TX_BUSY, even though it looks so inviting to driver authors. See http://www.spinics.net/lists/netdev/msg322350.htmlInspired-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
David S. Miller authored
Ian Morris says: ==================== ipv4: coding style - comparisons with NULL Per the suggestion of Joe Perches, attached is a patch which aligns the coding style in ipv4 for comparisons with NULL. The code uses multiple different styles when comparing with NULL (I.e. x == NULL and !x as well as x != NULL and x). Generally the latter form is preferred in netdev and so this changes aligns the code to this style. ==================== Signed-off-by: -
Ian Morris authored
The ipv4 code uses a mixture of coding styles. In some instances check for non-NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by:
Ian Morris <ipm@chirality.org.uk> Signed-off-by:
-
Ian Morris authored
The ipv4 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by:
-
Catherine Sullivan authored
Bump. Change-ID: I7dc88baa33264e5919bc938adf76706573209432 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Jim Young <james.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
Refactor VF RSS code to allow RSS on a single queue and eliminate the need for the next_queue function. Change-ID: I9253bad96b7f542ee7036e15636db0e5d58d8ef2 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Mitch Williams authored
The MAC filter list is protected by a critical task bit, and the VLAN list should be protected as well. This prevents list corruption if the watchdog happens to run at the same time as a VLAN filter is being added or deleted. Change-ID: Ia4867cebbbb046a1f38012771b288a634ca5882b Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Anjali Singhai Jain authored
This does not affect the Virtual channel API as such but it changes the meaning of what is communicated to the VSI resource struct as vsi_id. Earlier vsi_idx was being passed in, which was the index in the PF's VSI array. Now we pass vsi_id as communicated by the FW to the driver. This will help with future expansion of VF and FW communication. With this in place now the VF and Virtual channel driver change to move over to VSI id use is complete and is validated. Change-ID: I14246ef82b3b3dc1fa76291d2dd0c05d12cedb7c Signed-off-by:
-
Mitch Williams authored
In some cases, the hardware would continue to try to access the FDIR ring after entering D3Hot state, which would cause either PCIe errors or NMIs, depending upon system configuration. Explicitly stop FDIR in our shutdown routine to eliminate this possibility. Change-ID: Ib98060d6352ec595ab9a78bfe252675a9fa5d8bc Signed-off-by:
-
Shannon Nelson authored
When the VXLAN ports are added and removed, the messaging was giving some bogus index info, the port was always '0' for the delete, and the message text style didn't match other messages in the driver. Also, there was an over-use of the tertiary statement which made reading a little harder than necessary. Change-ID: Ie805182a697b8b4c12024403ada87fd4e4fa2358 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Neerav Parikh authored
Do not register or try to de-register DCB applications with the DCBNL layer in case of NIC partitions when adapter is in MFP mode. Change-ID: I603d042a61983a6562be471c6a2b181572504118 Signed-off-by:
Neerav Parikh <neerav.parikh@intel.com> Tested-by:
-
Greg Rose authored
If transmit VLAN HW offloads are disabled then the network stack sends up an skb with the protocol set to 8021q. In that case to get the correct checksum offloads we have to reset the skb protocol to the encapsulated ethertype. Change-ID: I903d78533de09b1c5d3ec695ee1990dd0fa5dd0d Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
-
Mitch Williams authored
The call to pci_disable_sriov got moved, but the message about not disabling VFs didn't move. So move it. While we're at, reword the message a bit to make it more consistent with other driver messages. Change-ID: I17d3e15e4fcfd5c9431a96ecb0117d728d3da18b Signed-off-by:
-
Jesse Brandeburg authored
A function was calling i40e_tx_map with return, but tx_map returns void, and the caller returns void, so just drop the return, and everything is good. Change-ID: I53fc676d517864761e7cbb8ca83f1ef0c15b1f8f Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Jesse Brandeburg authored
If the skb allocation fails we should not continue using the skb pointer. Breaking out at the point of failure means that at the next RX interrupt the driver will try the allocation again. Change-ID: Iefaad69856ced7418bfd92afe55322676341f82e Signed-off-by:
-
Jesse Brandeburg authored
Several memcpys are not necessary and can be changed to structure assignments. Struct assignments are always type safe so this is preferable. Change-ID: I7daf45a4b5e799c686b9d5c8ba9db047584ab82b Signed-off-by:
-
Anjali Singhai Jain authored
HMC_ERRORINFO and HMC_ERRORDATA helps explain the cause of HMC error. Change-ID: I053bbc175a5f4c5c3e9ec2ea7400d5c56aaa4ec1 Signed-off-by:
-
Mitch Williams authored
Validate that the VF has sent us a valid VSI index before actually using that index. Without this code, a malicious or buggy VF driver could panic the host by sending an invalid index into the VSI array. Change-ID: I66a177687a0dcc281ec83e714d3813d70d18c8b4 Reported-by:
Nick Nunley <nicholas.d.nunley@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
Inner protocol being UDP should not stop us from verifying Outer UDP checksum correctness. If the Outer protocol is not UDP (NVGRE) we should not be doing a UDP checksum check. If the packet has zero checksum, skip checksum check. Change-ID: Ie7f153feb276a59f66a54a0938901b2c0a8100fa Signed-off-by:
-
- 02 Apr, 2015 5 commits
-
-
David S. Miller authored
Eli Cohen says: ==================== mlx5 batch of patches for net-next This series contains small fixes to the mlx5 core driver and also preparation steps towards adding Ethernet support for ConnectX4 devices which will be part of mlx5 driver. ==================== Signed-off-by: -
Saeed Mahameed authored
Preparation for ethernet driver. Signed-off-by:
Achiad Shochat <achiad@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
Pass consumer index as a parameter to arm CQ Signed-off-by:
-
Saeed Mahameed authored
Preparation for ethernet driver. These functions will be used in drivers other than mlx5_ib. Signed-off-by:
-
Achiad Shochat authored
Declare the support of new ConnectX4 HCA in module info Pump up the module version Signed-off-by:
-
