We can now piggyback error strings to userspace via extended acks
rather than using printk.

Before:
bridge fdb add 01:02:03:04:05:06 dev br0 vlan 4095
RTNETLINK answers: Invalid argument

After:
bridge fdb add 01:02:03:04:05:06 dev br0 vlan 4095
Error: invalid vlan id.

v3: drop 'RTM_' prefixes, suggested by David Ahern, they
are not useful, the add/del in bridge command line is enough.

Also reword error in response to malformed/bad vlan id attribute
size.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

exercise RTM_GETNETCONF call path for unspec, inet and inet6
families, they are DOIT_UNLOCKED candidates.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4_en num of rings

This patchset from Inbar contains changes to rings control
to the mlx4 Eth driver.

Patches 1 and 2 limit the number of rings to the number of CPUs.
Patch 3 removes a limitation in logic of default number of RX rings.

Series generated against net-next commit:
812b5ca7 Add a driver for Renesas uPD60620 and uPD60620A PHYs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove limitation of netif_get_num_default_rss_queues()
from logic of RX rings default number.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Limit the number of RX rings by the number of cores
in the system.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Limit the number of TX rings per UP by the number of cores
in the system.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lipeng says:

====================
Support set_ringparam and {set|get}_rxnfc ethtool commands

1, Patch [1/5,2/5] add support for ethtool ops set_ringparam
   (ethtool -G) and fix related bug.
2, Patch [3/5,4/5, 5/5] add support for ethtool ops
   set_rxnfc/get_rxnfc (-n/-N) and fix related bug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fix the ring count for ETHTOOL_GRXRINGS. Ring count
not TC size should be return for command "ethtool -n ethx".
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add support for ethtool's ETHTOOL_GRXFH in hns3_get_rxnfc().
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch supports the ethtool's set_rxnfc().
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch supports the ethtool's set_ringparam().
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the ring index in hns3_fini_ring.
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add 0x50aa and 0x50ab T5 device id's.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for new flash parts identification, and
also cleanup the flash Part identifying and decoding
code.

Based on the original work of Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix BUG() calls to use BUG_ON(conditional) macros.

This was found using make coccicheck M=net/core on linux next
tag next-2017092
Signed-off-by: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
bpf: get rid of global verifier state and reuse instruction printer

This set started off as simple extraction of eBPF verifier's instruction
printer into a separate file but evolved into removal of global state.
The purpose of moving instruction printing code is to be able to reuse it
from the bpftool.

As far as the global verifier lock goes, this set removes the global
variables relating to the log buffer, makes the one-time init done
by bpf_get_skb_set_tunnel_proto() not depend on any external locking,
and performs verifier log writeback as data is produced removing the need
for allocating a potentially large temporary buffer.

The final step of actually removing the verifier lock is left to someone
more competent and self-confident :)

Note that struct bpf_verifier_env is just 40B under two pages now,
we should probably switch to vzalloc() when it's expanded again...

v2:
 - add a selftest;
 - use env buffer and flush on every print (Alexei);
 - handle kernel log allocation failures (Daniel);
 - put the env log members into a struct (Daniel).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Verifier log buffer can be quite large (up to 16MB currently).
As Eric Dumazet points out if we allow multiple verification
requests to proceed simultaneously, malicious user may use the
verifier as a way of allocating large amounts of unswappable
memory to OOM the host.

Switch to a strategy of allocating a smaller buffer (1024B)
and writing it out into the user buffer after every print.

While at it remove the old BUG_ON().

This is in preparation of the global verifier lock removal.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf_skb_set_tunnel_*() functions require allocation of per-cpu
metadata_dst.  The allocation happens upon verification of the
first program using those helpers.  In preparation for removing
the verifier lock, use cmpxchg() to make sure we only allocate
the metadata_dsts once.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Compile the instruction printer from kernel/bpf and use it
for disassembling "translated" eBPF code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Separate the instruction printing into a standalone source file.
This way sneaky code from tools/ can compile it in directly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The biggest piece of global state protected by the verifier lock
is the verifier_log.  Move that log to struct bpf_verifier_env.
struct bpf_verifier_env has to be passed now to all invocations
of verbose().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Put the loose log_* variables into a structure.  This will make
it simpler to remove the global verifier state in following patches.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a test for verifier log handling.  Check bad attr combinations
but focus on cases when log is truncated.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The use of the | operator always leads to true which looks rather
suspect to me. Fix this by using & instead to just check the
RTF_CACHE entry bit.

Detected by CoverityScan, CID#1457734, #1457747 ("Wrong operator used")

Fixes: 35732d01 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently rt6_ex is being dereferenced before it is null checked
hence there is a possible null dereference bug. Fix this by only
dereferencing rt6_ex after it has been null checked.

Detected by CoverityScan, CID#1457749 ("Dereference before null check")

Fixes: 81eb8447 ("ipv6: take care of rt6_stats")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vhost-net has a hard limit on the number of zerocopy skbs in flight.
When reached, transmission stalls. Stalls cause latency, as well as
head-of-line blocking of other flows that do not use zerocopy.

Instead of stalling, revert to copy-based transmission.

Tested by sending two udp flows from guest to host, one with payload
of VHOST_GOODCOPY_LEN, the other too small for zerocopy (1B). The
large flow is redirected to a netem instance with 1MBps rate limit
and deep 1000 entry queue.

  modprobe ifb
  ip link set dev ifb0 up
  tc qdisc add dev ifb0 root netem limit 1000 rate 1MBit

  tc qdisc add dev tap0 ingress
  tc filter add dev tap0 parent ffff: protocol ip \
      u32 match ip dport 8000 0xffff \
      action mirred egress redirect dev ifb0

Before the delay, both flows process around 80K pps. With the delay,
before this patch, both process around 400. After this patch, the
large flow is still rate limited, while the small reverts to its
original rate. See also discussion in the first link, below.

Without rate limiting, {1, 10, 100}x TCP_STREAM tests continued to
send at 100% zerocopy.

The limit in vhost_exceeds_maxpend must be carefully chosen. With
vq->num >> 1, the flows remain correlated. This value happens to
correspond to VHOST_MAX_PENDING for vq->num == 256. Allow smaller
fractions and ensure correctness also for much smaller values of
vq->num, by testing the min() of both explicitly. See also the
discussion in the second link below.

Changes
  v1 -> v2
    - replaced min with typed min_t
    - avoid unnecessary whitespace change

Link:http://lkml.kernel.org/r/CAF=yD-+Wk9sc9dXMUq1+x_hh=3ThTXa6BnZkygP3tgVpjbp93g@mail.gmail.com
Link:http://lkml.kernel.org/r/20170819064129.27272-1-den@klaipeden.comSigned-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add erspan netlink interface for OVS.
Signed-off-by: William Tu <u9012063@gmail.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch the DO_ONCE() macro from the deprecated jump label API to the new
one.  The new one is more readable, and for DO_ONCE() it also makes the
generated code more icache-friendly: now the one-time initialization
code is placed out-of-line at the jump target, rather than at the inline
fallthrough case.
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch replaces rcu_deference() with rcu_dereference_bh() in
ipv6_route_seq_next() to avoid the following warning:

[   19.431685] WARNING: suspicious RCU usage
[   19.433451] 4.14.0-rc3-00914-g66f5d6ce #118 Not tainted
[   19.435509] -----------------------------
[   19.437267] net/ipv6/ip6_fib.c:2259 suspicious
rcu_dereference_check() usage!
[   19.440790]
[   19.440790] other info that might help us debug this:
[   19.440790]
[   19.444734]
[   19.444734] rcu_scheduler_active = 2, debug_locks = 1
[   19.447757] 2 locks held by odhcpd/3720:
[   19.449480]  #0:  (&p->lock){+.+.}, at: [<ffffffffb1231f7d>]
seq_read+0x3c/0x333
[   19.452720]  #1:  (rcu_read_lock_bh){....}, at: [<ffffffffb1d2b984>]
ipv6_route_seq_start+0x5/0xfd
[   19.456323]
[   19.456323] stack backtrace:
[   19.458812] CPU: 0 PID: 3720 Comm: odhcpd Not tainted
4.14.0-rc3-00914-g66f5d6ce #118
[   19.462042] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.10.2-1 04/01/2014
[   19.465414] Call Trace:
[   19.466788]  dump_stack+0x86/0xc0
[   19.468358]  lockdep_rcu_suspicious+0xea/0xf3
[   19.470183]  ipv6_route_seq_next+0x71/0x164
[   19.471963]  seq_read+0x244/0x333
[   19.473522]  proc_reg_read+0x48/0x67
[   19.475152]  ? proc_reg_write+0x67/0x67
[   19.476862]  __vfs_read+0x26/0x10b
[   19.478463]  ? __might_fault+0x37/0x84
[   19.480148]  vfs_read+0xba/0x146
[   19.481690]  SyS_read+0x51/0x8e
[   19.483197]  do_int80_syscall_32+0x66/0x15a
[   19.484969]  entry_INT80_compat+0x32/0x50
[   19.486707] RIP: 0023:0xf7f0be8e
[   19.488244] RSP: 002b:00000000ffa75d04 EFLAGS: 00000246 ORIG_RAX:
0000000000000003
[   19.491431] RAX: ffffffffffffffda RBX: 0000000000000009 RCX:
0000000008056068
[   19.493886] RDX: 0000000000001000 RSI: 0000000008056008 RDI:
0000000000001000
[   19.496331] RBP: 00000000000001ff R08: 0000000000000000 R09:
0000000000000000
[   19.498768] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[   19.501217] R13: 0000000000000000 R14: 0000000000000000 R15:
0000000000000000

Fixes: 66f5d6ce ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge powerpc transactional memory fixes from Michael Ellerman:
 "I figured I'd still send you the commits using a bundle to make sure
  it works in case I need to do it again in future"

This fixes transactional memory state restore for powerpc.

* bundle'd patches from Michael Ellerman:
  powerpc/tm: Fix illegal TM state in signal handler
  powerpc/64s: Use emergency stack for kernel TM Bad Thing program checks

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-10-09

This series contains updates to i40e and i40evf only.

Jake fixes missed flag conversion from u64 to u32.  Fixes a deafult ITR
value issue where the driver defaults to an ITR value of half the
expected value (in terms of minimum microseconds between interrupts).  So
fix this by changing the default values to be calculated using the
ITR_REG_TO_USEC() macro which indicates that we are converting from the
register units into microseconds. Updates the drivers to bump the tail in
increments of 8 and double the number of descriptors we will bundle into
one tail bump when receiving.  With the recent kernel support for
enabling XPS and QoS at the same time, we no longer need to worry about
the number of traffic classes when enabling XPS.

Lihong converts the use of hash_for_each() to hash_for_each_safe() to
safely remove a hash entry.  Adds a check for the return value for
find_first_bit() in the case that it returns the size passed to search.

Alan fixes a bug in which filters are erroneously removed if they are
removed and then added again.  So make sure that when adding a filter, if
we find it already existed in our list, make sure it is not marked to be
removed.

Jayaprakash adds the retrying of PHY reads when the I2C is busy for a
maximum period of 500ms.

Rami fixes code comment typo.

Stefano Brivio simplifies the code by removing the use of a local
return code variable and simply return the results of the read function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2017-10-09

This series contains updates to ixgbe only.

Emil fixes an issue where the semaphore bits could be stuck after a reset
or a crash, by adding the clearing of software resource bits in the
software/firmware synchronization register.  Added error checks when we
attempt to identify and initialize the PHY to prevent a crash.  Fixed a
few issues in the logic of ixgbe_clean_test_rings() which was exposed by
a previous commit that was causing a crash in ethtool diagnostics.

Bhumika Goyal fixes a couple of instances which were overlooked when we
made ixgbe_mac_operations constant.

Shannon Nelson fixes an issue to restore normal operations after the
last MACVLAN offload is removed, otherwise we get stuck in a single queue
operations.

The infamous Jesper Dangaard Brouer adds a counter which counts the
number of times the recycle fails and the real page allocator is invoked.

Alex updates the adaptive ITR algorithm to better support the needs of the
network.  This attempt to make it so that our ITR algorithm will try to
prevent either starving a socket buffer for memory in the case of
transmit, or overrunning an receive socket buffer on receive.  We should
function better with new features like XDP which can handle small packets
at high rates without needing to lock us into NAPI polling mode.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix object leak on IPSEC offload failure, from Steffen Klassert.

 2) Fix range checks in ipset address range addition operations, from
    Jozsef Kadlecsik.

 3) Fix pernet ops unregistration order in ipset, from Florian Westphal.

 4) Add missing netlink attribute policy for nl80211 packet pattern
    attrs, from Peng Xu.

 5) Fix PPP device destruction race, from Guillaume Nault.

 6) Write marks get lost when BPF verifier processes R1=R2 register
    assignments, causing incorrect liveness information and less state
    pruning. Fix from Alexei Starovoitov.

 7) Fix blockhole routes so that they are marked dead and therefore not
    cached in sockets, otherwise IPSEC stops working. From Steffen
    Klassert.

 8) Fix broadcast handling of UDP socket early demux, from Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits)
  cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwan
  net: thunderx: mark expected switch fall-throughs in nicvf_main()
  udp: fix bcast packet reception
  netlink: do not set cb_running if dump's start() errs
  ipv4: Fix traffic triggered IPsec connections.
  ipv6: Fix traffic triggered IPsec connections.
  ixgbe: incorrect XDP ring accounting in ethtool tx_frame param
  net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
  Revert commit 1a8b6d76 ("net:add one common config...")
  ixgbe: fix masking of bits read from IXGBE_VXLANCTRL register
  ixgbe: Return error when getting PHY address if PHY access is not supported
  netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'
  netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hook
  tipc: Unclone message at secondary destination lookup
  tipc: correct initialization of skb list
  gso: fix payload length when gso_size is zero
  mlxsw: spectrum_router: Avoid expensive lookup during route removal
  bpf: fix liveness marking
  doc: Fix typo "8023.ad" in bonding documentation
  ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real
  ...

The u-blox TOBY-L2 is a LTE Cat 4 module with HSPA+ and 2G fallback.
This module allows switching to different USB profiles with the
'AT+UUSBCONF' command, and provides a ECM network interface when the
'AT+UUSBCONF=2' profile is selected.

The u-blox SARA-U2 is a HSPA module with 2G fallback. The default USB
configuration includes a ECM network interface.

Both these modules are controlled via AT commands through one of the
TTYs exposed. Connecting these modules may be done just by activating
the desired PDP context with 'AT+CGACT=1,<cid>' and then running DHCP
on the ECM interface.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 09f79fd4 ("i40e: avoid NVM acquire deadlock during NVM update")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes a typo in i40e_vsi_alloc_arrays() documentation.
The first parameter name should be "vsi" instead of "type".
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The computed result of I40E_MAX_VSI_QP * I40E_VIRTCHNL_SUPPORTED_QTYPES
is used more than three times in function i40e_config_irq_link_list.
Simply declare a local variable to store it to improve readability.
Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

- When the I2C is busy, the PHY reads are delayed.  The firmware will
  return EGAIN in these cases with an expectation that the SW will
  trigger the reads again
- This patch retries the operation for a maximum period of 500ms
Signed-off-by: Jayaprakash Shanmugam <jayaprakash.shanmugam@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>