This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.

Link: http://lkml.kernel.org/r/20161110113452.76501.45864.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the
DMA APIs in the arch/arm folder.  This change is meant to correct that
so that we get consistent behavior.

Link: http://lkml.kernel.org/r/20161110113447.76501.93160.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.

Link: http://lkml.kernel.org/r/20161110113442.76501.7673.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the
DMA APIs in the arch/arm folder.  This change is meant to correct that
so that we get consistent behavior.

Link: http://lkml.kernel.org/r/20161110113436.76501.13386.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Steven Miao <realmz6@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the
DMA APIs in the arch/arm folder.  This change is meant to correct that
so that we get consistent behavior.

Link: http://lkml.kernel.org/r/20161110113430.76501.79737.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The use of DMA_ATTR_SKIP_CPU_SYNC was not consistent across all of the
DMA APIs in the arch/arm folder.  This change is meant to correct that
so that we get consistent behavior.

Link: http://lkml.kernel.org/r/20161110113424.76501.2715.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Add support for DMA writable pages being writable by the
network stack", v3.

The first 19 patches in the set add support for the DMA attribute
DMA_ATTR_SKIP_CPU_SYNC on multiple platforms/architectures.  This is
needed so that we can flag the calls to dma_map/unmap_page so that we do
not invalidate cache lines that do not currently belong to the device.
Instead we have to take care of this in the driver via a call to
sync_single_range_for_cpu prior to freeing the Rx page.

Patch 20 adds support for dma_map_page_attrs and dma_unmap_page_attrs so
that we can unmap and map a page using the DMA_ATTR_SKIP_CPU_SYNC
attribute.

Patch 21 adds support for freeing a page that has multiple references
being held by a single caller.  This way we can free page fragments that
were allocated by a given driver.

The last 2 patches use these updates in the igb driver, and lay the
groundwork to allow for us to reimplement the use of build_skb.

This patch (of 23):

This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to
avoid invoking cache line invalidation if the driver will just handle it
later via a sync_for_cpu or sync_for_device call.

Link: http://lkml.kernel.org/r/20161110113419.76501.38491.stgit@ahduyck-blue-test.jf.intel.comSigned-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Do not break lines while printk()ing values.

  kernel: warning: process `tomoyo_file_tes' used the deprecated sysctl system call with
  kernel: 3.
  kernel: 5.
  kernel: 56.
  kernel:

Link: http://lkml.kernel.org/r/1480814833-4976-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A soft lookup will occur when I run trinity in syscall kexec_load.  the
corresponding stack information is as follows.

  BUG: soft lockup - CPU#6 stuck for 22s! [trinity-c6:13859]
  Kernel panic - not syncing: softlockup: hung tasks
  CPU: 6 PID: 13859 Comm: trinity-c6 Tainted: G           O L ----V-------   3.10.0-327.28.3.35.zhongjiang.x86_64 #1
  Hardware name: Huawei Technologies Co., Ltd. Tecal BH622 V2/BC01SRSA0, BIOS RMIBV386 06/30/2014
  Call Trace:
   <IRQ>  dump_stack+0x19/0x1b
   panic+0xd8/0x214
   watchdog_timer_fn+0x1cc/0x1e0
   __hrtimer_run_queues+0xd2/0x260
   hrtimer_interrupt+0xb0/0x1e0
   ? call_softirq+0x1c/0x30
   local_apic_timer_interrupt+0x37/0x60
   smp_apic_timer_interrupt+0x3f/0x60
   apic_timer_interrupt+0x6d/0x80
   <EOI>  ? kimage_alloc_control_pages+0x80/0x270
   ? kmem_cache_alloc_trace+0x1ce/0x1f0
   ? do_kimage_alloc_init+0x1f/0x90
   kimage_alloc_init+0x12a/0x180
   SyS_kexec_load+0x20a/0x260
   system_call_fastpath+0x16/0x1b

the first time allocation of control pages may take too much time
because crash_res.end can be set to a higher value.  we need to add
cond_resched to avoid the issue.

The patch have been tested and above issue is not appear.

Link: http://lkml.kernel.org/r/1481164674-42775-1-git-send-email-zhongjiang@huawei.comSigned-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently in x86_64, the symbol address of phys_base is exported to
vmcoreinfo.  Dave Anderson complained this is really useless for his
Crash implementation.  Because in user-space utility Crash and
Makedumpfile which exported vmcore information is mainly used for, value
of phys_base is needed to covert virtual address of exported kernel
symbol to physical address.  Especially init_level4_pgt, if we want to
access and go over the page table to look up a PA corresponding to VA,
firstly we need calculate

  page_dir = SYMBOL(init_level4_pgt) - __START_KERNEL_map + phys_base;

Now in Crash and Makedumpfile, we have to analyze the vmcore elf program
header to get value of phys_base.  As Dave said, it would be preferable
if it were readily availabl in vmcoreinfo rather than depending upon the
PT_LOAD semantics.

Hence in this patch change to export the value of phys_base instead of
its virtual address.

And people also complained that KERNEL_IMAGE_SIZE exporting is x86_64
only, should be moved into arch dependent function
arch_crash_save_vmcoreinfo.  Do the moving in this patch.

Link: http://lkml.kernel.org/r/1478568596-30060-2-git-send-email-bhe@redhat.comSigned-off-by: Baoquan He <bhe@redhat.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Xunlei Pang <xlpang@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Eugene Surovegin <surovegin@google.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 0549a3c0 ("kdump, vmcoreinfo: report memory
sections virtual addresses").

Commit 0549a3c0 tells the userspace utility makedumpfile the
randomized base address of these memmory sections when mm kaslr is
enabled.  However the following patch "kexec: export the value of
phys_base instead of symbol address" makes makedumpfile not need these
addresses any more.

Besides we should use VMCOREINFO_NUMBER to export the value of the
variable so that we can use the existing number_table mechanism of
Makedumpfile to fetch it.  So revert it now.  If needed we can add it
later.

http://lists.infradead.org/pipermail/kexec/2016-October/017540.html
Link: http://lkml.kernel.org/r/1478568596-30060-1-git-send-email-bhe@redhat.comSigned-off-by: Baoquan He <bhe@redhat.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Xunlei Pang <xlpang@redhat.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Eugene Surovegin <surovegin@google.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Atsushi Kumagai <ats-kumagai@wm.jp.nec.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I was amused to find "unsafe core_pattern" warning having these lines in
/etc/sysctl.conf:

	fs.suid_dumpable=2
	kernel.core_pattern=/core/core-%e-%p-%E
	kernel.core_uses_pid=0

Turns out kernel is formally right.  Default core_pattern is just "core",
which doesn't qualify for secure path while setting suid.dumpable.

Hint admins about solution, clarify sysctl names, delete unnecessary '\'
characters (string literals are concatenated regardless) and reformat for
easier grepping.

Link: http://lkml.kernel.org/r/20161029152124.GA1258@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When running certain database workload on a high-end system with many
CPUs, it was found that spinlock contention in the sigprocmask syscalls
became a significant portion of the overall CPU cycles as shown below.

  9.30%  9.30%  905387  dataserver  /proc/kcore 0x7fff8163f4d2
  [k] _raw_spin_lock_irq
            |
            ---_raw_spin_lock_irq
               |
               |--99.34%-- __set_current_blocked
               |          sigprocmask
               |          sys_rt_sigprocmask
               |          system_call_fastpath
               |          |
               |          |--50.63%-- __swapcontext
               |          |          |
               |          |          |--99.91%-- upsleepgeneric
               |          |
               |          |--49.36%-- __setcontext
               |          |          ktskRun

Looking further into the swapcontext function in glibc, it was found that
the function always call sigprocmask() without checking if there are
changes in the signal mask.

A check was added to the __set_current_blocked() function to avoid taking
the sighand->siglock spinlock if there is no change in the signal mask.
This will prevent unneeded spinlock contention when many threads are
trying to call sigprocmask().

With this patch applied, the spinlock contention in sigprocmask() was
gone.

Link: http://lkml.kernel.org/r/1474979209-11867-1-git-send-email-Waiman.Long@hpe.comSigned-off-by: Waiman Long <Waiman.Long@hpe.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

compaction has been disabled for GFP_NOFS and GFP_NOIO requests since
the direct compaction was introduced by commit 56de7263 ("mm:
compaction: direct compact when a high-order allocation fails").  The
main reason is that the migration of page cache pages might recurse back
to fs/io layer and we could potentially deadlock.  This is overly
conservative because all the anonymous memory is migrateable in the
GFP_NOFS context just fine.  This might be a large portion of the memory
in many/most workkloads.

Remove the GFP_NOFS restriction and make sure that we skip all fs pages
(those with a mapping) while isolating pages to be migrated.  We cannot
consider clean fs pages because they might need a metadata update so
only isolate pages without any mapping for nofs requests.

The effect of this patch will be probably very limited in many/most
workloads because higher order GFP_NOFS requests are quite rare,
although different configurations might lead to very different results.
David Chinner has mentioned a heavy metadata workload with 64kB block
which to quote him:

: Unfortunately, there was an era of cargo cult configuration tweaks in the
: Ceph community that has resulted in a large number of production machines
: with XFS filesystems configured this way.  And a lot of them store large
: numbers of small files and run under significant sustained memory
: pressure.
:
: I slowly working towards getting rid of these high order allocations and
: replacing them with the equivalent number of single page allocations, but
: I haven't got that (complex) change working yet.

We can do the following to simulate that workload:
$ mkfs.xfs -f -n size=64k <dev>
$ mount <dev> /mnt/scratch
$ time ./fs_mark  -D  10000  -S0  -n  100000  -s  0  -L  32 \
        -d  /mnt/scratch/0  -d  /mnt/scratch/1 \
        -d  /mnt/scratch/2  -d  /mnt/scratch/3 \
        -d  /mnt/scratch/4  -d  /mnt/scratch/5 \
        -d  /mnt/scratch/6  -d  /mnt/scratch/7 \
        -d  /mnt/scratch/8  -d  /mnt/scratch/9 \
        -d  /mnt/scratch/10  -d  /mnt/scratch/11 \
        -d  /mnt/scratch/12  -d  /mnt/scratch/13 \
        -d  /mnt/scratch/14  -d  /mnt/scratch/15

and indeed is hammers the system with many high order GFP_NOFS requests as
per a simle tracepoint during the load:
$ echo '!(gfp_flags & 0x80) && (gfp_flags &0x400000)' > $TRACE_MNT/events/kmem/mm_page_alloc/filter
I am getting
5287609 order=0
     37 order=1
1594905 order=2
3048439 order=3
6699207 order=4
  66645 order=5

My testing was done in a kvm guest so performance numbers should be
taken with a grain of salt but there seems to be a difference when the
patch is applied:

* Original kernel
FSUse%        Count         Size    Files/sec     App Overhead
     1      1600000            0       4300.1         20745838
     3      3200000            0       4239.9         23849857
     5      4800000            0       4243.4         25939543
     6      6400000            0       4248.4         19514050
     8      8000000            0       4262.1         20796169
     9      9600000            0       4257.6         21288675
    11     11200000            0       4259.7         19375120
    13     12800000            0       4220.7         22734141
    14     14400000            0       4238.5         31936458
    16     16000000            0       4231.5         23409901
    18     17600000            0       4045.3         23577700
    19     19200000            0       2783.4         58299526
    21     20800000            0       2678.2         40616302
    23     22400000            0       2693.5         83973996

and xfs complaining about memory allocation not making progress
[ 2304.372647] XFS: fs_mark(3289) possible memory allocation deadlock size 65624 in kmem_alloc (mode:0x2408240)
[ 2304.443323] XFS: fs_mark(3285) possible memory allocation deadlock size 65728 in kmem_alloc (mode:0x2408240)
[ 4796.772477] XFS: fs_mark(3424) possible memory allocation deadlock size 46936 in kmem_alloc (mode:0x2408240)
[ 4796.775329] XFS: fs_mark(3423) possible memory allocation deadlock size 51416 in kmem_alloc (mode:0x2408240)
[ 4797.388808] XFS: fs_mark(3424) possible memory allocation deadlock size 65728 in kmem_alloc (mode:0x2408240)

* Patched kernel
FSUse%        Count         Size    Files/sec     App Overhead
     1      1600000            0       4289.1         19243934
     3      3200000            0       4241.6         32828865
     5      4800000            0       4248.7         32884693
     6      6400000            0       4314.4         19608921
     8      8000000            0       4269.9         24953292
     9      9600000            0       4270.7         33235572
    11     11200000            0       4346.4         40817101
    13     12800000            0       4285.3         29972397
    14     14400000            0       4297.2         20539765
    16     16000000            0       4219.6         18596767
    18     17600000            0       4273.8         49611187
    19     19200000            0       4300.4         27944451
    21     20800000            0       4270.6         22324585
    22     22400000            0       4317.6         22650382
    24     24000000            0       4065.2         22297964

So the dropdown at Count 19200000 didn't happen and there was only a
single warning about allocation not making progress
[ 3063.815003] XFS: fs_mark(3272) possible memory allocation deadlock size 65624 in kmem_alloc (mode:0x2408240)

This suggests that the patch has helped even though there is not all that
much of anonymous memory as the workload mostly generates fs metadata.  I
assume the success rate would be higher with more anonymous memory which
should be the case in many workloads.

[akpm@linux-foundation.org: fix comment]
Link: http://lkml.kernel.org/r/20161012114721.31853-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NMI handler doesn't call set_irq_regs(), it's set only by normal IRQ.
Thus get_irq_regs() returns NULL or stale registers snapshot with IP/SP
pointing to the code interrupted by IRQ which was interrupted by NMI.
NULL isn't a problem: in this case watchdog calls dump_stack() and
prints full stack trace including NMI.  But if we're stuck in IRQ
handler then NMI watchlog will print stack trace without IRQ part at
all.

This patch uses registers snapshot passed into NMI handler as arguments:
these registers point exactly to the instruction interrupted by NMI.

Fixes: 55537871 ("kernel/watchdog.c: perform all-CPU backtrace in case of hard lockup")
Link: http://lkml.kernel.org/r/146771764784.86724.6006627197118544150.stgit@buzzSigned-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: <stable@vger.kernel.org>	[4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 262c5e86 ("printk/btrfs: handle more message headers")
triggers:

    warning: `ratelimit' may be used uninitialized in this function

with gcc (4.1.2) and probably many other versions.  The code actually is
correct but a bit twisted.  Let's make it more straightforward and set
the default values at the beginning.

Link: http://lkml.kernel.org/r/20161213135246.GQ3506@pathway.suse.czSigned-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull device mapper updates from Mike Snitzer:

 - various fixes and improvements to request-based DM and DM multipath

 - some locking improvements in DM bufio

 - add Kconfig option to disable the DM block manager's extra locking
   which mainly serves as a developer tool

 - a few bug fixes to DM's persistent-data

 - a couple changes to prepare for multipage biovec support in the block
   layer

 - various improvements and cleanups in the DM core, DM cache, DM raid
   and DM crypt

 - add ability to have DM crypt use keys from the kernel key retention
   service

 - add a new "error_writes" feature to the DM flakey target, reads are
   left unchanged in this mode

* tag 'dm-4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits)
  dm flakey: introduce "error_writes" feature
  dm cache policy smq: use hash_32() instead of hash_32_generic()
  dm crypt: reject key strings containing whitespace chars
  dm space map: always set ev if sm_ll_mutate() succeeds
  dm space map metadata: skip useless memcpy in metadata_ll_init_index()
  dm space map metadata: fix 'struct sm_metadata' leak on failed create
  Documentation: dm raid: define data_offset status field
  dm raid: fix discard support regression
  dm raid: don't allow "write behind" with raid4/5/6
  dm mpath: use hw_handler_params if attached hw_handler is same as requested
  dm crypt: add ability to use keys from the kernel key retention service
  dm array: remove a dead assignment in populate_ablock_with_values()
  dm ioctl: use offsetof() instead of open-coding it
  dm rq: simplify use_blk_mq initialization
  dm: use blk_set_queue_dying() in __dm_destroy()
  dm bufio: drop the lock when doing GFP_NOIO allocation
  dm bufio: don't take the lock in dm_bufio_shrink_count
  dm bufio: avoid sleeping while holding the dm_bufio lock
  dm table: simplify dm_table_determine_type()
  dm table: an 'all_blk_mq' table must be loaded for a blk-mq DM device
  ...

Pull MD updates from Shaohua Li:

 - a raid5 writeback cache feature.

   The goal is to aggregate writes to make full stripe write and reduce
   read-modify-write. It's helpful for workload which does sequential
   write and follows fsync for example. This feature is experimental and
   off by default right now.

 - FAILFAST support.

   This fails IOs to broken raid disks quickly, so can improve latency.
   It's mainly for DASD storage, but some patches help normal raid array
   too.

 - support bad block for raid array with external metadata

 - AVX2 instruction support for raid6 parity calculation

 - normalize MD info output

 - add missing blktrace

 - other bug fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (66 commits)
  md: separate flags for superblock changes
  md: MD_RECOVERY_NEEDED is set for mddev->recovery
  md: takeover should clear unrelated bits
  md/r5cache: after recovery, increase journal seq by 10000
  md/raid5-cache: fix crc in rewrite_data_only_stripes()
  md/raid5-cache: no recovery is required when create super-block
  md: fix refcount problem on mddev when stopping array.
  md/r5cache: do r5c_update_log_state after log recovery
  md/raid5-cache: adjust the write position of the empty block if no data blocks
  md/r5cache: run_no_space_stripes() when R5C_LOG_CRITICAL == 0
  md/raid5: limit request size according to implementation limits
  md/raid5-cache: do not need to set STRIPE_PREREAD_ACTIVE repeatedly
  md/raid5-cache: remove the unnecessary next_cp_seq field from the r5l_log
  md/raid5-cache: release the stripe_head at the appropriate location
  md/raid5-cache: use ring add to prevent overflow
  md/raid5-cache: remove unnecessary function parameters
  raid5-cache: don't set STRIPE_R5C_PARTIAL_STRIPE flag while load stripe into cache
  raid5-cache: add another check conditon before replaying one stripe
  md/r5cache: enable IRQs on error path
  md/r5cache: handle alloc_page failure
  ...

Pull another MMC update from Ulf Hansson:
 "Here's a second pull request for MMC for v4.10.

  As a matter of fact it's only one change that moves some mmc files
  around. I thought it was a good idea to get this into v4.10, as it
  gives us a nice and fresh base for v4.11. Summary:

  MMC core:

   - Move files from the card directory to the core directory to enable
     future clean-ups of the generic mmc header files and interfaces"

* tag 'mmc-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: block: Move files to core

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (ncr5380,
  lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas).

  There's also an assortment of minor fixes, mostly in error legs or
  other not very user visible stuff. The major change is the
  pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this
  effectively makes IRQ mapping generic for the drivers and allows
  blk_mq to use the information"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits)
  scsi: qla4xxx: switch to pci_alloc_irq_vectors
  scsi: hisi_sas: support deferred probe for v2 hw
  scsi: megaraid_sas: switch to pci_alloc_irq_vectors
  scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices
  scsi: be2iscsi: set errno on error path
  scsi: be2iscsi: set errno on error path
  scsi: hpsa: fallback to use legacy REPORT PHYS command
  scsi: scsi_dh_alua: Fix RCU annotations
  scsi: hpsa: use %phN for short hex dumps
  scsi: hisi_sas: fix free'ing in probe and remove
  scsi: isci: switch to pci_alloc_irq_vectors
  scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI
  scsi: dpt_i2o: double free on error path
  scsi: cxlflash: Migrate scsi command pointer to AFU command
  scsi: cxlflash: Migrate IOARRIN specific routines to function pointers
  scsi: cxlflash: Cleanup queuecommand()
  scsi: cxlflash: Cleanup send_tmf()
  scsi: cxlflash: Remove AFU command lock
  scsi: cxlflash: Wait for active AFU commands to timeout upon tear down
  scsi: cxlflash: Remove private command pool
  ...

Pull configfs update from Christoph Hellwig:
 "Just one simple change from Andrzej to drop the pointless return value
  from the ->drop_link method"

* tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfs:
  fs: configfs: don't return anything from drop_link

Pull ext4 updates from Ted Ts'o:
 "This merge request includes the dax-4.0-iomap-pmd branch which is
  needed for both ext4 and xfs dax changes to use iomap for DAX. It also
  includes the fscrypt branch which is needed for ubifs encryption work
  as well as ext4 encryption and fscrypt cleanups.

  Lots of cleanups and bug fixes, especially making sure ext4 is robust
  against maliciously corrupted file systems --- especially maliciously
  corrupted xattr blocks and a maliciously corrupted superblock. Also
  fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
  mbcache so we don't miss some common xattr blocks that can be merged"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
  dax: Fix sleep in atomic contex in grab_mapping_entry()
  fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FL
  fscrypt: Delay bounce page pool allocation until needed
  fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page()
  fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page()
  fscrypt: Never allocate fscrypt_ctx on in-place encryption
  fscrypt: Use correct index in decrypt path.
  fscrypt: move the policy flags and encryption mode definitions to uapi header
  fscrypt: move non-public structures and constants to fscrypt_private.h
  fscrypt: unexport fscrypt_initialize()
  fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info()
  fscrypto: move ioctl processing more fully into common code
  fscrypto: remove unneeded Kconfig dependencies
  MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patches
  ext4: do not perform data journaling when data is encrypted
  ext4: return -ENOMEM instead of success
  ext4: reject inodes with negative size
  ext4: remove another test in ext4_alloc_file_blocks()
  Documentation: fix description of ext4's block_validity mount option
  ext4: fix checks for data=ordered and journal_async_commit options
  ...

Pull f2fs updates from Jaegeuk Kim:
 "This patch series contains several performance tuning patches
  regarding to the IO submission flow, in addition to supporting new
  features such as a ZBC-base drive and multiple devices.

  It also includes some major bug fixes such as:
   - checkpoint version control
   - fdatasync-related roll-forward recovery routine
   - memory boundary or null-pointer access in corner cases
   - missing error cases

  It has various minor clean-up patches as well"

* tag 'for-f2fs-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (66 commits)
  f2fs: fix a missing size change in f2fs_setattr
  f2fs: fix to access nullified flush_cmd_control pointer
  f2fs: free meta pages if sanity check for ckpt is failed
  f2fs: detect wrong layout
  f2fs: call sync_fs when f2fs is idle
  Revert "f2fs: use percpu_counter for # of dirty pages in inode"
  f2fs: return AOP_WRITEPAGE_ACTIVATE for writepage
  f2fs: do not activate auto_recovery for fallocated i_size
  f2fs: fix to determine start_cp_addr by sbi->cur_cp_pack
  f2fs: fix 32-bit build
  f2fs: set ->owner for debugfs status file's file_operations
  f2fs: fix incorrect free inode count in ->statfs
  f2fs: drop duplicate header timer.h
  f2fs: fix wrong AUTO_RECOVER condition
  f2fs: do not recover i_size if it's valid
  f2fs: fix fdatasync
  f2fs: fix to account total free nid correctly
  f2fs: fix an infinite loop when flush nodes in cp
  f2fs: don't wait writeback for datas during checkpoint
  f2fs: fix wrong written_valid_blocks counting
  ...

Pull dlm fixes from David Teigland:
 "This set fixes error reporting for dlm sockets, removes the unbound
  property on the dlm callback workqueue to improve performance, and
  includes a couple trivial changes"

* tag 'dlm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: fix error return code in sctp_accept_from_sock()
  dlm: don't specify WQ_UNBOUND for the ast callback workqueue
  dlm: remove lock_sock to avoid scheduling while atomic
  dlm: don't save callbacks after accept
  dlm: audit and remove any unnecessary uses of module.h
  dlm: make genl_ops const

Pull jfs update from David Kleikamp:
 "The jfs piece of the current_time() series"

* tag 'jfs-4.10' of git://github.com/kleikamp/linux-shaggy:
  fs: jfs: Replace CURRENT_TIME_SEC by current_time()

This reverts commit 6d31e3ba.

This causes bootup problems for me both on my laptop and my desktop.
What they have in common is that they have NVMe disks with dm-crypt, but
it's not the same controller, so it's not controller-specific.

Jens does not see it on his machine (also NVMe), so it's presumably
something that triggers just on bootup.  Possibly related to dm-crypt
and the fact that I mark my luks volume with "allow-discards" in
/etc/crypttab.

It's 100% repeatable for me, which made it fairly straightforward to
bisect the problem to this commit. Small mercies.

So we don't know what the reason is yet, but the revert is needed to get
things going again.
Acked-by: Jens Axboe <axboe@fb.com>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull arm64 updates from Catalin Marinas:

 - struct thread_info moved off-stack (also touching
   include/linux/thread_info.h and include/linux/restart_block.h)

 - cpus_have_cap() reworked to avoid __builtin_constant_p() for static
   key use (also touching drivers/irqchip/irq-gic-v3.c)

 - uprobes support (currently only for native 64-bit tasks)

 - Emulation of kernel Privileged Access Never (PAN) using TTBR0_EL1
   switching to a reserved page table

 - CPU capacity information passing via DT or sysfs (used by the
   scheduler)

 - support for systems without FP/SIMD (IOW, kernel avoids touching
   these registers; there is no soft-float ABI, nor kernel emulation for
   AArch64 FP/SIMD)

 - handling of hardware watchpoint with unaligned addresses, varied
   lengths and offsets from base

 - use of the page table contiguous hint for kernel mappings

 - hugetlb fixes for sizes involving the contiguous hint

 - remove unnecessary I-cache invalidation in flush_cache_range()

 - CNTHCTL_EL2 access fix for CPUs with VHE support (ARMv8.1)

 - boot-time checks for writable+executable kernel mappings

 - simplify asm/opcodes.h and avoid including the 32-bit ARM counterpart
   and make the arm64 kernel headers self-consistent (Xen headers patch
   merged separately)

 - Workaround for broken .inst support in certain binutils versions

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (60 commits)
  arm64: Disable PAN on uaccess_enable()
  arm64: Work around broken .inst when defective gas is detected
  arm64: Add detection code for broken .inst support in binutils
  arm64: Remove reference to asm/opcodes.h
  arm64: Get rid of asm/opcodes.h
  arm64: smp: Prevent raw_smp_processor_id() recursion
  arm64: head.S: Fix CNTHCTL_EL2 access on VHE system
  arm64: Remove I-cache invalidation from flush_cache_range()
  arm64: Enable HIBERNATION in defconfig
  arm64: Enable CONFIG_ARM64_SW_TTBR0_PAN
  arm64: xen: Enable user access before a privcmd hvc call
  arm64: Handle faults caused by inadvertent user access with PAN enabled
  arm64: Disable TTBR0_EL1 during normal kernel execution
  arm64: Introduce uaccess_{disable,enable} functionality based on TTBR0_EL1
  arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
  arm64: Factor out PAN enabling/disabling into separate uaccess_* macros
  arm64: Update the synchronous external abort fault description
  selftests: arm64: add test for unaligned/inexact watchpoint handling
  arm64: Allow hw watchpoint of length 3,5,6 and 7
  arm64: hw_breakpoint: Handle inexact watchpoint addresses
  ...

Pull s390 updates from Martin Schwidefsky:
 "The main bulk of the s390 patches for the 4.10 merge window:

   - Add support for the contiguous memory allocator.

   - The recovery for I/O errors in the dasd device driver is improved,
     the driver will now remove channel paths that are not working
     properly.

   - Additional fields are added to /proc/sysinfo, the extended
     partition name and the partition UUID.

   - New naming for PCI devices with system defined UIDs.

   - The last few remaining alloc_bootmem calls are converted to
     memblock.

   - The thread_info structure is stripped down and moved to the
     task_struct. The only field left in thread_info is the flags field.

   - Rework of the arch topology code to fix a fake numa issue.

   - Refactoring of the atomic primitives and add a new preempt_count
     implementation.

   - Clocksource steering for the STP sync check offsets.

   - The s390 specific headers are changed to make them usable with
     CLANG.

   - Bug fixes and cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (70 commits)
  s390/cpumf: Use configuration level indication for sampling data
  s390: provide memmove implementation
  s390: cleanup arch/s390/kernel Makefile
  s390: fix initrd corruptions with gcov/kcov instrumented kernels
  s390: exclude early C code from gcov profiling
  s390/dasd: channel path aware error recovery
  s390/dasd: extend dasd path handling
  s390: remove unused labels from entry.S
  s390/vmlogrdr: fix IUCV buffer allocation
  s390/crypto: unlock on error in prng_tdes_read()
  s390/sysinfo: show partition extended name and UUID if available
  s390/numa: pin all possible cpus to nodes early
  s390/numa: establish cpu to node mapping early
  s390/topology: use cpu_topology array instead of per cpu variable
  s390/smp: initialize cpu_present_mask in setup_arch
  s390/topology: always use s390 specific sched_domain_topology_level
  s390/smp: use smp_get_base_cpu() helper function
  s390/numa: always use logical cpu and core ids
  s390: Remove VLAIS in ptff() and clear_table()
  s390: fix machine check panic stack switch
  ...

Pull xen updates from Juergen Gross:
 "Xen features and fixes for 4.10

  These are some fixes, a move of some arm related headers to share them
  between arm and arm64 and a series introducing a helper to make code
  more readable.

  The most notable change is David stepping down as maintainer of the
  Xen hypervisor interface. This results in me sending you the pull
  requests for Xen related code from now on"

* tag 'for-linus-4.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
  xen/balloon: Only mark a page as managed when it is released
  xenbus: fix deadlock on writes to /proc/xen/xenbus
  xen/scsifront: don't request a slot on the ring until request is ready
  xen/x86: Increase xen_e820_map to E820_X_MAX possible entries
  x86: Make E820_X_MAX unconditionally larger than E820MAX
  xen/pci: Bubble up error and fix description.
  xen: xenbus: set error code on failure
  xen: set error code on failures
  arm/xen: Use alloc_percpu rather than __alloc_percpu
  arm/arm64: xen: Move shared architecture headers to include/xen/arm
  xen/events: use xen_vcpu_id mapping for EVTCHNOP_status
  xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing
  xen-scsifront: Add a missing call to kfree
  MAINTAINERS: update XEN HYPERVISOR INTERFACE
  xenfs: Use proc_create_mount_point() to create /proc/xen
  xen-platform: use builtin_pci_driver
  xen-netback: fix error handling output
  xen: make use of xenbus_read_unsigned() in xenbus
  xen: make use of xenbus_read_unsigned() in xen-pciback
  xen: make use of xenbus_read_unsigned() in xen-fbfront
  ...

Pull swiotlb updates from Konrad Rzeszutek Wilk:

 - minor fixes (rate limiting), remove certain functions

 - support for DMA_ATTR_SKIP_CPU_SYNC which is an optimization
   in the DMA API

* 'stable/for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Minor fix-ups for DMA_ATTR_SKIP_CPU_SYNC support
  swiotlb: Add support for DMA_ATTR_SKIP_CPU_SYNC
  swiotlb-xen: Enforce return of DMA_ERROR_CODE in mapping function
  swiotlb: Drop unused functions swiotlb_map_sg and swiotlb_unmap_sg
  swiotlb: Rate-limit printing when running out of SW-IOMMU space

Pull KVM updates from Paolo Bonzini:
 "Small release, the most interesting stuff is x86 nested virt
  improvements.

  x86:
   - userspace can now hide nested VMX features from guests
   - nested VMX can now run Hyper-V in a guest
   - support for AVX512_4VNNIW and AVX512_FMAPS in KVM
   - infrastructure support for virtual Intel GPUs.

  PPC:
   - support for KVM guests on POWER9
   - improved support for interrupt polling
   - optimizations and cleanups.

  s390:
   - two small optimizations, more stuff is in flight and will be in
     4.11.

  ARM:
   - support for the GICv3 ITS on 32bit platforms"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits)
  arm64: KVM: pmu: Reset PMSELR_EL0.SEL to a sane value before entering the guest
  KVM: arm/arm64: timer: Check for properly initialized timer on init
  KVM: arm/arm64: vgic-v2: Limit ITARGETSR bits to number of VCPUs
  KVM: x86: Handle the kthread worker using the new API
  KVM: nVMX: invvpid handling improvements
  KVM: nVMX: check host CR3 on vmentry and vmexit
  KVM: nVMX: introduce nested_vmx_load_cr3 and call it on vmentry
  KVM: nVMX: propagate errors from prepare_vmcs02
  KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT
  KVM: nVMX: load GUEST_EFER after GUEST_CR0 during emulated VM-entry
  KVM: nVMX: generate MSR_IA32_CR{0,4}_FIXED1 from guest CPUID
  KVM: nVMX: fix checks on CR{0,4} during virtual VMX operation
  KVM: nVMX: support restore of VMX capability MSRs
  KVM: nVMX: generate non-true VMX MSRs based on true versions
  KVM: x86: Do not clear RFLAGS.TF when a singlestep trap occurs.
  KVM: x86: Add kvm_skip_emulated_instruction and use it.
  KVM: VMX: Move skip_emulated_instruction out of nested_vmx_check_vmcs12
  KVM: VMX: Reorder some skip_emulated_instruction calls
  KVM: x86: Add a return value to kvm_emulate_cpuid
  KVM: PPC: Book3S: Move prototypes for KVM functions into kvm_ppc.h
  ...

Merge tag 'hwmon-for-linus-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - new drivers for TMP108 and TC654

 - hwmon core code cleanup

 - coretemp driver cleanup

 - fix overflow issues in several drivers

 - minor fixes, cleanups and enhancements in various drivers

* tag 'hwmon-for-linus-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits)
  hwmon: (g762) Fix overflows and crash seen when writing limit attributes
  hwmon: (emcw201) Fix overflows seen when writing into limit attributes
  hwmon: (emc2103) Fix overflows seen when temperature limit attributes
  hwmon: (lm85) Fix overflows seen when writing voltage limit attributes
  hwmon: (lm87) Fix overflow seen when writing voltage limit attributes
  hwmon: (nct7802) Fix overflows seen when writing into limit attributes
  hwmon: (adt7470) Fix overflows seen when writing into limit attributes
  hwmon: (adt7462) Fix overflows seen when writing into limit attributes
  hwmon: (adm1026) Fix overflows seen when writing into limit attributes
  hwmon: (adm1025) Fix overflows seen when writing voltage limits
  hwmon: (via-cputemp) Convert to hotplug state machine
  devicetree: hwmon: Add documentation for TMP108 driver.
  hwmon: Add Texas Instruments TMP108 temperature sensor driver.
  hwmon: (core) Simplify sysfs attribute name allocation
  hwmon: (core) Rename groups parameter in API to extra_groups
  hwmon: (core) Explain why at least two attribute groups are allocated
  hwmon: (core) Make is_visible callback truly mandatory
  hwmon: (core) Deprecate hwmon_device_register()
  hwmon: (core) Clarify use of chip attributes
  hwmon: (core) Add support for string attributes to new API
  ...

Pull spi updates from Mark Brown:
 "The nicest things about this release for me is seeing some older
  drivers getting some cleanups and modernization, it's really good to
  see things moving forwards even for older drivers.

  In content terms it's a fairly humdrum release but where the work has
  been happening is great.

   - Support for simultaneous use of internal and GPIO chip selects for
     devices that require the use of the internal select even if it's
     not connected and a GPIO is actually routed to the slave device.

   - A major rework and cleanup of the fsl-espi driver from Heiner
     Kallweit which should make it work substantially better.

   - DMA support for Freescale DSPI IPs.

   - New drivers for Freescale LPSPI IPs and Marvell Armada 3700.

   - Support for Allwinner H3"

* tag 'spi-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (85 commits)
  spi: mvebu: fix baudrate calculation for armada variant
  spi: Add support for Armada 3700 SPI Controller
  spi: armada-3700: Add documentation for the Armada 3700 SPI Controller
  spi: fsl-lpspi: quit reading rx fifo under error condition
  spi: fsl-lpspi: use GPL as module license
  spi: fsl-espi: fix ioread16/iowrite16 endianness
  spi: fsl-espi: remove unused linearization code
  spi: fsl-espi: eliminate need for linearization when reading from hardware
  spi: fsl-espi: eliminate need for linearization when writing to hardware
  spi: fsl-espi: determine need for byte swap only once
  spi: fsl-lpspi: read lpspi tx/rx fifo size in probe()
  spi: fsl-lpspi: use wait_for_completion_timeout() while waiting transfer done
  spi: orion: fix comment to mention MVEBU
  spi: atmel: remove the use of private channel fields
  spi: atmel: trivial: remove unused fields in DMA structure
  spi: atmel: Use SPI core DMA mapping framework
  spi: atmel: Use core SPI_MASTER_MUST_[RT]X handling
  spi: atmel: trivial: move info banner to latest probe action
  spi: imx: replace schedule() with cond_resched()
  spi: imx: fix potential shift truncation
  ...

Pull another libata patch from Tejun Heo:
 "One more patch from Adam added.

  It makes libata skip probing for NCQ prio unless the feature is
  explicitly requested by the user. This is necessary because some
  controllers lock up after the optional feature is probed"

* 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: avoid probing NCQ Prio Support if not explicitly requested

Previously, when the ata device was being initialized we were
probing for NCQ prio support by checking the identify information
and also checking the log page that holds information about ncq prio
support.

This caused an error on an Intel HBA so the code is now updated to
only probe for NCQ prio support when the sysfs variable controlling
NCQ prio support is enabled.

tj: Update formatting, switch to spin_[un]lock_irq() and update
    locking a bit, use REVALIDATE instead of RESET, and return -EIO
    instead of -EINVAL on config failure.
Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull libata updates from Tejun Heo:

 - Adam added opt-in ATA command priority support.

 - There are machines which hide multiple nvme devices behind an ahci
   BAR. Dan Williams proposed a solution to force-switch the mode but
   deemed too hackishd. People are gonna discuss the proper way to
   handle the situation in nvme standard meetings. For now, detect and
   warn about the situation.

 - Low level driver specific changes.

Christoph Hellwig pipes in about the hidden nvme warning:
 "I wish that was the case. We've pretty much agreed that we'll want to
  implement it as a virtual PCIe root bridge, similar to Intels other
  'innovation' VMD that we work around that way.

  But Intel management has apparently decided that they don't want to
  spend more cycles on this now that Lenovo has an optional BIOS that
  doesn't force this broken mode anymore, and no one outside of Intel
  has enough information to implement something like this.

  So for now I guess this warning is it, until Intel reconsideres and
  spends resources on fixing up the damage their Chipset people caused"

* 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: warn about remapped NVMe devices
  ahci-remap.h: add ahci remapping definitions
  nvme: move NVMe class code to pci_ids.h
  pata: imx: support controller modes up to PIO4
  pata: imx: add support of setting timings for PIO modes
  pata: imx: set controller PIO mode with .set_piomode callback
  pata: imx: sort headers out
  ata: set ncq_prio_enabled iff device has support
  ata: ATA Command Priority Disabled By Default
  ata: Enabling ATA Command Priorities
  block: Add iocontext priority to request
  ahci: qoriq: added ls1046a platform support

Pull workqueue updates from Tejun Heo:
 "Mostly patches to initialize workqueue subsystem earlier and get rid
  of keventd_up().

  The patches were headed for the last merge cycle but got delayed due
  to a bug found late minute, which is fixed now.

  Also, to help debugging, destroy_workqueue() is more chatty now on a
  sanity check failure."

* 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: move wq_numa_init() to workqueue_init()
  workqueue: remove keventd_up()
  debugobj, workqueue: remove keventd_up() usage
  slab, workqueue: remove keventd_up() usage
  power, workqueue: remove keventd_up() usage
  tty, workqueue: remove keventd_up() usage
  mce, workqueue: remove keventd_up() usage
  workqueue: make workqueue available early during boot
  workqueue: dump workqueue state on sanity check failures in destroy_workqueue()

Pull percpu update from Tejun Heo:
 "This includes just one patch to reject non-power-of-2 alignments and
  trigger warning. Interestingly, this actually caught a bug in XEN
  ARM64"

* 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: ensure the requested alignment is power of two

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
  changes over lots of "minor" driver subsystems, the largest being some
  new FPGA drivers. Other than that, a few other new drivers, but no new
  driver subsystems added for this kernel cycle, a nice change.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits)
  uio-hv-generic: store physical addresses instead of virtual
  Tools: hv: kvp: configurable external scripts path
  uio-hv-generic: new userspace i/o driver for VMBus
  vmbus: add support for dynamic device id's
  hv: change clockevents unbind tactics
  hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()
  hyperv: Fix spelling of HV_UNKOWN
  mei: bus: enable non-blocking RX
  mei: fix the back to back interrupt handling
  mei: synchronize irq before initiating a reset.
  VME: Remove shutdown entry from vme_driver
  auxdisplay: ht16k33: select framebuffer helper modules
  MAINTAINERS: add git url for fpga
  fpga: Clarify how write_init works streaming modes
  fpga zynq: Fix incorrect ISR state on bootup
  fpga zynq: Remove priv->dev
  fpga zynq: Add missing \n to messages
  fpga: Add COMPILE_TEST to all drivers
  uio: pruss: add clk_disable()
  char/pcmcia: add some error checking in scr24x_read()
  ...