- 16 Dec, 2021 13 commits
-
-
Will Deacon authored
Introduce an unshare hypercall which can be used to unmap memory from the hypervisor stage-1 in nVHE protected mode. This will be useful to update the EL2 ownership state of pages during guest teardown, and avoids keeping dangling mappings to unreferenced portions of memory. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-14-qperret@google.com
-
Will Deacon authored
Tearing down a previously shared memory region results in the borrower losing access to the underlying pages and returning them to the "owned" state in the owner. Implement a do_unshare() helper, along the same lines as do_share(), to provide this functionality for the host-to-hyp case. Reviewed-by: Andrew Walbran <qwandor@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-13-qperret@google.com
-
Will Deacon authored
__pkvm_host_share_hyp() shares memory between the host and the hypervisor so implement it as an invocation of the new do_share() mechanism. Note that double-sharing is no longer permitted (as this allows us to reduce the number of page-table walks significantly), but is thankfully no longer relied upon by the host. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-12-qperret@google.com
-
Will Deacon authored
By default, protected KVM isolates memory pages so that they are accessible only to their owner: be it the host kernel, the hypervisor at EL2 or (in future) the guest. Establishing shared-memory regions between these components therefore involves a transition for each page so that the owner can share memory with a borrower under a certain set of permissions. Introduce a do_share() helper for safely sharing a memory region between two components. Currently, only host-to-hyp sharing is implemented, but the code is easily extended to handle other combinations and the permission checks for each component are reusable. Reviewed-by: Andrew Walbran <qwandor@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-11-qperret@google.com
-
Will Deacon authored
In preparation for adding additional locked sections for manipulating page-tables at EL2, introduce some simple wrappers around the host and hypervisor locks so that it's a bit easier to read and bit more difficult to take the wrong lock (or even take them in the wrong order). Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-10-qperret@google.com
-
Will Deacon authored
Explicitly name the combination of SW0 | SW1 as reserved in the pte and introduce a new PKVM_NOPAGE meta-state which, although not directly stored in the software bits of the pte, can be used to represent an entry for which there is no underlying page. This is distinct from an invalid pte, as stage-2 identity mappings for the host are created lazily and so an invalid pte there is the same as a valid mapping for the purposes of ownership information. This state will be used for permission checking during page transitions in later patches. Reviewed-by: Andrew Walbran <qwandor@google.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-9-qperret@google.com
-
Quentin Perret authored
In order to simplify the page tracking infrastructure at EL2 in nVHE protected mode, move the responsibility of refcounting pages that are shared multiple times on the host. In order to do so, let's create a red-black tree tracking all the PFNs that have been shared, along with a refcount. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-8-qperret@google.com
-
Quentin Perret authored
The create_hyp_mappings() function can currently be called at any point in time. However, its behaviour in protected mode changes widely depending on when it is being called. Prior to KVM init, it is used to create the temporary page-table used to bring-up the hypervisor, and later on it is transparently turned into a 'share' hypercall when the kernel has lost control over the hypervisor stage-1. In order to prepare the ground for also unsharing pages with the hypervisor during guest teardown, introduce a kvm_share_hyp() function to make it clear in which places a share hypercall should be expected, as we will soon need a matching unshare hypercall in all those places. Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-7-qperret@google.com
-
Will Deacon authored
Implement kvm_pgtable_hyp_unmap() which can be used to remove hypervisor stage-1 mappings at EL2. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-6-qperret@google.com
-
Will Deacon authored
kvm_pgtable_hyp_unmap() relies on the ->page_count() function callback being provided by the memory-management operations for the page-table. Wire up this callback for the hypervisor stage-1 page-table. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-5-qperret@google.com
-
Quentin Perret authored
In nVHE-protected mode, the hyp stage-1 page-table refcount is broken due to the lack of refcount support in the early allocator. Fix-up the refcount in the finalize walker, once the 'hyp_vmemmap' is up and running. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-4-qperret@google.com
-
Quentin Perret authored
To prepare the ground for allowing hyp stage-1 mappings to be removed at run-time, update the KVM page-table code to maintain a correct refcount using the ->{get,put}_page() function callbacks. Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-3-qperret@google.com
-
Quentin Perret authored
In nVHE protected mode, the EL2 code uses a temporary allocator during boot while re-creating its stage-1 page-table. Unfortunately, the hyp_vmmemap is not ready to use at this stage, so refcounting pages is not possible. That is not currently a problem because hyp stage-1 mappings are never removed, which implies refcounting of page-table pages is unnecessary. In preparation for allowing hypervisor stage-1 mappings to be removed, provide stub implementations for {get,put}_page() in the early allocator. Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211215161232.1480836-2-qperret@google.com
-
- 01 Dec, 2021 7 commits
-
-
Marc Zyngier authored
* kvm-arm64/fpsimd-tracking: : . : Simplify the handling of both the FP/SIMD and SVE state by : removing the need for mapping the thread at EL2, and by : dropping the tracking of the host's SVE state which is : always invalid by construction. : . arm64/fpsimd: Document the use of TIF_FOREIGN_FPSTATE by KVM KVM: arm64: Stop mapping current thread_info at EL2 KVM: arm64: Introduce flag shadowing TIF_FOREIGN_FPSTATE KVM: arm64: Remove unused __sve_save_state KVM: arm64: Get rid of host SVE tracking/saving KVM: arm64: Reorder vcpu flag definitions Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
* kvm-arm64/vcpu-first-run: : Rework the "vcpu first run" sequence to be driven by KVM's : "PID change" callback, removing the need for extra state. KVM: arm64: Drop vcpu->arch.has_run_once for vcpu->pid KVM: arm64: Merge kvm_arch_vcpu_run_pid_change() and kvm_vcpu_first_run_init() KVM: arm64: Restructure the point where has_run_once is advertised KVM: arm64: Move kvm_arch_vcpu_run_pid_change() out of line KVM: arm64: Move SVE state mapping at HYP to finalize-time Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
With the transition to kvm_arch_vcpu_run_pid_change() to handle the "run once" activities, it becomes obvious that has_run_once is now an exact shadow of vcpu->pid. Replace vcpu->arch.has_run_once with a new vcpu_has_run_once() helper that directly checks for vcpu->pid, and get rid of the now unused field. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
The kvm_arch_vcpu_run_pid_change() helper gets called on each PID change. The kvm_vcpu_first_run_init() helper gets run on the... first run(!) of a vcpu. As it turns out, the first run of a vcpu also triggers a PID change event (vcpu->pid is initially NULL). Use this property to merge these two helpers and get rid of another arm64-specific oddity. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Restructure kvm_vcpu_first_run_init() to set the has_run_once flag after having completed all the "run once" activities. This includes moving the flip of the userspace irqchip static key to a point where nothing can fail. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Having kvm_arch_vcpu_run_pid_change() inline doesn't bring anything to the table. Move it next to kvm_vcpu_first_run_init(), which will be convenient for what is next to come. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
We currently map the SVE state to HYP on detection of a PID change. Although this matches what we do for FPSIMD, this is pretty pointless for SVE, as the buffer is per-vcpu and has nothing to do with the thread that is being run. Move the mapping of the SVE state to finalize-time, which is where we allocate the state memory, and thus the most logical place to do this. Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
-
- 28 Nov, 2021 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull vhost,virtio,vdpa bugfixes from Michael Tsirkin: "Misc fixes all over the place. Revert of virtio used length validation series: the approach taken does not seem to work, breaking too many guests in the process. We'll need to do length validation using some other approach" [ This merge also ends up reverting commit f7a36b03 ("vsock/virtio: suppress used length validation"), which came in through the networking tree in the meantime, and was part of that whole used length validation series - Linus ] * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa_sim: avoid putting an uninitialized iova_domain vhost-vdpa: clean irqs before reseting vdpa device virtio-blk: modify the value type of num in virtio_queue_rq() vhost/vsock: cleanup removing `len` variable vhost/vsock: fix incorrect used length reported to the guest Revert "virtio_ring: validate used buffer length" Revert "virtio-net: don't let virtio core to validate used length" Revert "virtio-blk: don't let virtio core to validate used length" Revert "virtio-scsi: don't let virtio core to validate used buffer length"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 build fix from Thomas Gleixner: "A single fix for a missing __init annotation of prepare_command_line()" * tag 'x86-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Mark prepare_command_line() __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix to ensure that there is no stale KASAN shadow state left on the idle task's stack when a CPU is brought up after it was brought down before" * tag 'sched-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/scs: Reset task stack state in bringup_cpu()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "A single fix for perf to prevent it from sending SIGTRAP to another task from a trace point event as it's not possible to deliver a synchronous signal to a different task from there" * tag 'perf-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Ignore sigtrap for tracepoints destined for other tasks
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "Two regression fixes for reader writer semaphores: - Plug a race in the lock handoff which is caused by inconsistency of the reader and writer path and can lead to corruption of the underlying counter. - down_read_trylock() is suboptimal when the lock is contended and multiple readers trylock concurrently. That's due to the initial value being read non-atomically which results in at least two compare exchange loops. Making the initial readout atomic reduces this significantly. Whith 40 readers by 11% in a benchmark which enforces contention on mmap_sem" * tag 'locking-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Optimize down_read_trylock() under highly contended case locking/rwsem: Make handoff bit handling more consistent
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull another tracing fix from Steven Rostedt: "Fix the fix of pid filtering The setting of the pid filtering flag tested the "trace only this pid" case twice, and ignored the "trace everything but this pid" case. The 5.15 kernel does things a little differently due to the new sparse pid mask introduced in 5.16, and as the bug was discovered running the 5.15 kernel, and the first fix was initially done for that kernel, that fix handled both cases (only pid and all but pid), but the forward port to 5.16 created this bug" * tag 'trace-v5.16-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Test the 'Do not trace this pid' case in create event
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Intel VT-d fixes: - Remove unused PASID_DISABLED - Fix RCU locking - Fix for the unmap_pages call-back - Rockchip RK3568 address mask fix - AMD IOMMUv2 log message clarification * tag 'iommu-fixes-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix unmap_pages support iommu/vt-d: Fix an unbalanced rcu_read_lock/rcu_read_unlock() iommu/rockchip: Fix PAGE_DESC_HI_MASKs for RK3568 iommu/amd: Clarify AMD IOMMUv2 initialization messages iommu/vt-d: Remove unused PASID_DISABLED
-
- 27 Nov, 2021 12 commits
-
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull ksmbd fixes from Steve French: "Five ksmbd server fixes, four of them for stable: - memleak fix - fix for default data stream on filesystems that don't support xattr - error logging fix - session setup fix - minor doc cleanup" * tag '5.16-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: fix memleak in get_file_stream_info() ksmbd: contain default data stream even if xattr is empty ksmbd: downgrade addition info error msg to debug in smb2_get_info_sec() docs: filesystem: cifs: ksmbd: Fix small layout issues ksmbd: Fix an error handling path in 'smb2_sess_setup()'
-
Guenter Roeck authored
Use the architecture independent Kconfig option PAGE_SIZE_LESS_THAN_64KB to indicate that VMXNET3 requires a page size smaller than 64kB. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Guenter Roeck authored
NTFS_RW code allocates page size dependent arrays on the stack. This results in build failures if the page size is 64k or larger. fs/ntfs/aops.c: In function 'ntfs_write_mst_block': fs/ntfs/aops.c:1311:1: error: the frame size of 2240 bytes is larger than 2048 bytes Since commit f22969a6 ("powerpc/64s: Default to 64K pages for 64 bit book3s") this affects ppc:allmodconfig builds, but other architectures supporting page sizes of 64k or larger are also affected. Increasing the maximum frame size for affected architectures just to silence this error does not really help. The frame size would have to be set to a really large value for 256k pages. Also, a large frame size could potentially result in stack overruns in this code and elsewhere and is therefore not desirable. Make NTFS_RW dependent on page sizes smaller than 64k instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Guenter Roeck authored
NTFS_RW and VMXNET3 require a page size smaller than 64kB. Add generic Kconfig option for use outside architecture code to avoid architecture specific Kconfig options in that code. Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Steven Rostedt (VMware) authored
When creating a new event (via a module, kprobe, eprobe, etc), the descriptors that are created must add flags for pid filtering if an instance has pid filtering enabled, as the flags are used at the time the event is executed to know if pid filtering should be done or not. The "Only trace this pid" case was added, but a cut and paste error made that case checked twice, instead of checking the "Trace all but this pid" case. Link: https://lore.kernel.org/all/202111280401.qC0z99JB-lkp@intel.com/ Fixes: 6cb20650 ("tracing: Check pid filtering when creating events") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Fixes for a resource leak and a build robot complaint about totally dead code: - Fix buffer resource leak that could lead to livelock on corrupt fs. - Remove unused function xfs_inew_wait to shut up the build robots" * tag 'xfs-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: remove xfs_inew_wait xfs: Fix the free logic of state in xfs_attr_node_hasname
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap fixes from Darrick Wong: "A single iomap bug fix and a cleanup for 5.16-rc2. The bug fix changes how iomap deals with reading from an inline data region -- whereas the current code (incorrectly) lets the iomap read iter try for more bytes after reading the inline region (which zeroes the rest of the page!) and hopes the next iteration terminates, we surveyed the inlinedata implementations and realized that all inlinedata implementations also require that the inlinedata region end at EOF, so we can simply terminate the read. The second patch documents these assumptions in the code so that they're not subtle implications anymore, and cleans up some of the grosser parts of that function. Summary: - Fix an accounting problem where unaligned inline data reads can run off the end of the read iomap iterator. iomap has historically required that inline data mappings only exist at the end of a file, though this wasn't documented anywhere. - Document iomap_read_inline_data and change its return type to be appropriate for the information that it's actually returning" * tag 'iomap-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: iomap_read_inline_data cleanup iomap: Fix inline extent handling in iomap_readpage
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Two fixes to event pid filtering: - Make sure newly created events reflect the current state of pid filtering - Take pid filtering into account when recording trigger events. (Also clean up the if statement to be cleaner)" * tag 'trace-v5.16-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix pid filtering when triggers are attached tracing: Check pid filtering when creating events
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more io_uring fixes from Jens Axboe: "The locking fixup that was applied earlier this rc has both a deadlock and IRQ safety issue, let's get that ironed out before -rc3. This contains: - Link traversal locking fix (Pavel) - Cancelation fix (Pavel) - Relocate cond_resched() for huge buffer chain freeing, avoiding a softlockup warning (Ye) - Fix timespec validation (Ye)" * tag 'io_uring-5.16-2021-11-27' of git://git.kernel.dk/linux-block: io_uring: Fix undefined-behaviour in io_issue_sqe io_uring: fix soft lockup when call __io_remove_buffers io_uring: fix link traversal locking io_uring: fail cancellation for EXITING tasks
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block fixes from Jens Axboe: "Turns out that the flushing out of pending fixes before the Thanksgiving break didn't quite work out in terms of timing, so here's a followup set of fixes: - rq_qos_done() should be called regardless of whether or not we're the final put of the request, it's not related to the freeing of the state. This fixes an IO stall with wbt that a few users have reported, a regression in this release. - Only define zram_wb_devops if it's used, fixing a compilation warning for some compilers" * tag 'block-5.16-2021-11-27' of git://git.kernel.dk/linux-block: zram: only make zram_wb_devops for CONFIG_ZRAM_WRITEBACK block: call rq_qos_done() before ref check in batch completions
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Twelve fixes, eleven in drivers (target, qla2xx, scsi_debug, mpt3sas, ufs). The core fix is a minor correction to the previous state update fix for the iscsi daemons" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_debug: Zero clear zones at reset write pointer scsi: core: sysfs: Fix setting device state to SDEV_RUNNING scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select() scsi: target: configfs: Delete unnecessary checks for NULL scsi: target: core: Use RCU helpers for INQUIRY t10_alua_tg_pt_gp scsi: mpt3sas: Fix incorrect system timestamp scsi: mpt3sas: Fix system going into read-only mode scsi: mpt3sas: Fix kernel panic during drive powercycle test scsi: ufs: ufs-mediatek: Add put_device() after of_find_device_by_node() scsi: scsi_debug: Fix type in min_t to avoid stack OOB scsi: qla2xxx: edif: Fix off by one bug in qla_edif_app_getfcinfo() scsi: ufs: ufshpb: Fix warning in ufshpb_set_hpb_read_to_upiu()
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: "Highlights include: Stable fixes: - NFSv42: Fix pagecache invalidation after COPY/CLONE Bugfixes: - NFSv42: Don't fail clone() just because the server failed to return post-op attributes - SUNRPC: use different lockdep keys for INET6 and LOCAL - NFSv4.1: handle NFS4ERR_NOSPC from CREATE_SESSION - SUNRPC: fix header include guard in trace header" * tag 'nfs-for-5.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: use different lock keys for INET6 and LOCAL sunrpc: fix header include guard in trace header NFSv4.1: handle NFS4ERR_NOSPC by CREATE_SESSION NFSv42: Fix pagecache invalidation after COPY/CLONE NFS: Add a tracepoint to show the results of nfs_set_cache_invalid() NFSv42: Don't fail clone() unless the OP_CLONE operation failed
-