- 01 Mar, 2022 8 commits
-
-
David S. Miller authored
Merge tag 'wireless-for-net-2022-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless johannes Berg says: ==================== Some last-minute fixes: * rfkill - add missing rfill_soft_blocked() when disabled * cfg80211 - handle a nla_memdup() failure correctly - fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo in Makefile * mac80211 - fix EAPOL handling in 802.3 RX path - reject setting up aggregation sessions before connection is authorized to avoid timeouts or similar - handle some SAE authentication steps correctly - fix AC selection in mesh forwarding * iwlwifi - remove TWT support as it causes firmware crashes when the AP isn't behaving correctly - check debugfs pointer before dereferncing it ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
The kbuild change here accidentally removed not only the unquoting, but also the last character of the variable name. Fix that. Fixes: 129ab0d2 ("kbuild: do not quote string values in include/config/auto.conf") Reviewed-by:
Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
When we get anti-clogging token required (added by the commit mentioned below), or the other status codes added by the later commit 4e56cde1 ("mac80211: Handle special status codes in SAE commit") we currently just pretend (towards the internal state machine of authentication) that we didn't receive anything. This has the undesirable consequence of retransmitting the prior frame, which is not expected, because the timer is still armed. If we just disarm the timer at that point, it would result in the undesirable side effect of being in this state indefinitely if userspace crashes, or so. So to fix this, reset the timer and set a new auth_data->waiting in order to have no more retransmissions, but to have the data destroyed when the timer actually fires, which will only happen if userspace didn't continue (i.e. crashed or abandoned it.) Fixes: a4055e74 ("mac80211: Don't destroy auth data in case of anti-clogging") Reported-by:
Jouni Malinen <j@w1.fi> Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeidSigned-off-by:
-
Jiasheng Jiang authored
As there's potential for failure of the nla_memdup(), check the return value. Fixes: a442b761 ("cfg80211: add add_nan_func / del_nan_func") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cnSigned-off-by:
-
Randy Dunlap authored
When "debugfs=off" is used on the kernel command line, iwiwifi's mvm module uses an invalid/unchecked debugfs_dir pointer and causes a BUG: BUG: kernel NULL pointer dereference, address: 000000000000004f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 503 Comm: modprobe Tainted: G W 5.17.0-rc5 #7 Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021 RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm] Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73 RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328 RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620 R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000 R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320 FS: 00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm] iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm] iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm] _iwl_op_mode_start+0x6f/0xd0 [iwlwifi] iwl_opmode_register+0x6a/0xe0 [iwlwifi] ? 0xffffffffa0231000 iwl_mvm_init+0x35/0x1000 [iwlmvm] ? 0xffffffffa0231000 do_one_initcall+0x5a/0x1b0 ? kmem_cache_alloc+0x1e5/0x2f0 ? do_init_module+0x1e/0x220 do_init_module+0x48/0x220 load_module+0x2602/0x2bc0 ? __kernel_read+0x145/0x2e0 ? kernel_read_file+0x229/0x290 __do_sys_finit_module+0xc5/0x130 ? __do_sys_finit_module+0xc5/0x130 __x64_sys_finit_module+0x13/0x20 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f64dda564dd Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001 RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2 R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018 </TASK> Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev CR2: 000000000000004f ---[ end trace 0000000000000000 ]--- Check the debugfs_dir pointer for an error before using it. Fixes: 8c082a99 ("iwlwifi: mvm: simplify iwl_mvm_dbgfs_register") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220223030630.23241-1-rdunlap@infradead.org [change to make both conditional] Signed-off-by:
-
Golan Ben Ami authored
Some APs misbehave when TWT is used and cause our firmware to crash. We don't know a reasonable way to detect and work around this problem in the FW yet. To prevent these crashes, disable TWT in the driver by stopping to advertise TWT support. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> [reworded the commit message] Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fiSigned-off-by:
-
Ben Dooks authored
If CONFIG_RFKILL is not set, the Intel WiFi driver will not build the iw_mvm driver part due to the missing rfill_soft_blocked() call. Adding a inline declaration of rfill_soft_blocked() if CONFIG_RFKILL=n fixes the following error: drivers/net/wireless/intel/iwlwifi/mvm/mvm.h: In function 'iwl_mvm_mei_set_sw_rfkill_state': drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:2215:38: error: implicit declaration of function 'rfkill_soft_blocked'; did you mean 'rfkill_blocked'? [-Werror=implicit-function-declaration] 2215 | mvm->hw_registered ? rfkill_soft_blocked(mvm->hw->wiphy->rfkill) : false; | ^~~~~~~~~~~~~~~~~~~ | rfkill_blocked Signed-off-by:Ben Dooks <ben.dooks@codethink.co.uk> Reported-by:
Neill Whillans <neill.whillans@codethink.co.uk> Fixes: 5bc9a9dd ("rfkill: allow to get the software rfkill state") Link: https://lore.kernel.org/r/20220218093858.1245677-1-ben.dooks@codethink.co.ukSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-28 This series contains updates to igc and e1000e drivers. Corinna Vinschen ensures release of hardware sempahore on failed register read in igc_read_phy_reg_gpy(). Sasha does the same for the write variant, igc_write_phy_reg_gpy(). On e1000e, he resolves an issue with hardware unit hang on s0ix exit by disabling some bits and LAN connected device reset during power management flows. Lastly, he allows for TGP platforms to correct its NVM checksum. v2: Fix Fixes tag on patch 3 ==================== Signed-off-by:
-
- 28 Feb, 2022 9 commits
-
-
Sasha Neftin authored
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp, NVM checksum update is still possible. Emit a more detailed warning message. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663 Fixes: 4051f683 ("e1000e: Do not take care about recovery NVM checksum") Reported-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sasha Neftin authored
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY LAN connected device (LCD) reset during power management flows. This fixes possible HW unit hangs on the s0ix exit on some corporate ADL platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Fixes: 3e55d231 ("e1000e: Add handshake with the CSME to support S0ix") Suggested-by:
Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by:
Nir Efrati <nir.efrati@intel.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Sasha Neftin authored
Similar to "igc_read_phy_reg_gpy: drop premature return" patch. igc_write_phy_reg_gpy checks the return value from igc_write_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838f ("igc: Add code for PHY support") Suggested-by:
Corinna Vinschen <vinschen@redhat.com> Signed-off-by:
-
Corinna Vinschen authored
igc_read_phy_reg_gpy checks the return value from igc_read_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838f ("igc: Add code for PHY support") Signed-off-by:
-
Alex Elder authored
An IPA build problem arose in the linux-next tree the other day. The problem is that a recent commit adds a new dependency on some code, and the Kconfig file for IPA doesn't reflect that dependency. As a result, some configurations can fail to build (particularly when COMPILE_TEST is enabled). The recent patch adds calls to qmp_get(), qmp_put(), and qmp_send(), and those are built based on the QCOM_AOSS_QMP config option. If that symbol is not defined, stubs are defined, so we just need to ensure QCOM_AOSS_QMP is compatible with QCOM_IPA, or it's not defined. Reported-by:
Alex Elder <elder@linaro.org> Tested-by:
-
Jia-Ju Bai authored
The function ioremap() in fs_init() can fail, so its return value should be checked. Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Casper Andersson authored
main.h uses NUM_TARGETS from main_regs.h, but the missing include never causes any errors because everywhere main.h is (currently) included, main_regs.h is included before. But since it is dependent on main_regs.h it should always be included. Signed-off-by:
Casper Andersson <casper.casan@gmail.com> Reviewed-by:
Joacim Zetterling <joacim.zetterling@westermo.com> Signed-off-by:
-
Tony Lu authored
This patch calls smc_ib_unregister_client() when tcp_register_ulp() fails, and make sure to clean it up. Fixes: d7cd421d ("net/smc: Introduce TCP ULP support") Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
j.nixdorf@avm.de authored
There are two reasons for addrconf_notify() to be called with NETDEV_DOWN: either the network device is actually going down, or IPv6 was disabled on the interface. If either of them stays down while the other is toggled, we repeatedly call the code for NETDEV_DOWN, including ipv6_mc_down(), while never calling the corresponding ipv6_mc_up() in between. This will cause a new entry in idev->mc_tomb to be allocated for each multicast group the interface is subscribed to, which in turn leaks one struct ifmcaddr6 per nontrivial multicast group the interface is subscribed to. The following reproducer will leak at least $n objects: ip addr add ff2e::4242/32 dev eth0 autojoin sysctl -w net.ipv6.conf.eth0.disable_ipv6=1 for i in $(seq 1 $n); do ip link set up eth0; ip link set down eth0 done Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2) can also be used to create a nontrivial idev->mc_list, which will the leak objects with the right up-down-sequence. Based on both sources for NETDEV_DOWN events the interface IPv6 state should be considered: - not ready if the network interface is not ready OR IPv6 is disabled for it - ready if the network interface is ready AND IPv6 is enabled for it The functions ipv6_mc_up() and ipv6_down() should only be run when this state changes. Implement this by remembering when the IPv6 state is ready, and only run ipv6_mc_down() if it actually changed from ready to not ready. The other direction (not ready -> ready) already works correctly, as: - the interface notification triggered codepath for NETDEV_UP / NETDEV_CHANGE returns early if ipv6 is disabled, and - the disable_ipv6=0 triggered codepath skips fully initializing the interface as long as addrconf_link_ready(dev) returns false - calling ipv6_mc_up() repeatedly does not leak anything Fixes: 3ce62a84 ("ipv6: exit early in addrconf_notify() if IPv6 is disabled") Signed-off-by:
Johannes Nixdorf <j.nixdorf@avm.de> Signed-off-by:
-
- 26 Feb, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-25 This series contains updates to iavf driver only. Slawomir fixes stability issues that can be seen when stressing the driver using a large number of VFs with a multitude of operations. Among the fixes are reworking mutexes to provide more effective locking, ensuring initialization is complete before teardown, preventing operations which could race while removing the driver, stopping certain tasks from being queued when the device is down, and adding a missing mutex unlock. ==================== Signed-off-by:
-
- 25 Feb, 2022 22 commits
-
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.17-20220225' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-02-25 The first 2 patches are by Vincent Mailhol and fix the error handling of the ndo_open callbacks of the etas_es58x and the gs_usb CAN USB drivers. The last patch is by Lad Prabhakar and fixes a small race condition in the rcar_canfd's rcar_canfd_channel_probe() function. * tag 'linux-can-fixes-for-5.17-20220225' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready can: gs_usb: change active_channels's type from atomic_t to u8 can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8 ==================== Link: https://lore.kernel.org/r/20220225165622.3231809-1-mkl@pengutronix.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Slawomir Laba authored
The setup of __IAVF_RESETTING state in watchdog task had no effect and could lead to slow resets in the driver as the task for __IAVF_RESETTING state only requeues watchdog. Till now the __IAVF_RESETTING was interpreted by reset task as running state which could lead to errors with allocating and resources disposal. Make watchdog_task queue the reset task when it's necessary. Do not update the state to __IAVF_RESETTING so the reset task knows exactly what is the current state of the adapter. Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines") Signed-off-by:
Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by:
Phani Burra <phani.r.burra@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Slawomir Laba authored
The driver was queueing reset_task regardless of the netdev state. Do not queue the reset task in iavf_change_mtu if netdev is not running. Fixes: fdd4044f ("iavf: Remove timer for work triggering, use delaying work instead") Signed-off-by:
-
Slawomir Laba authored
There exists a missing mutex_unlock call on crit_lock in iavf_reset_task call path. Unlock the crit_lock before returning from reset task. Fixes: 5ac49f3c ("iavf: use mutexes for locking of critical sections") Signed-off-by:
-
Slawomir Laba authored
When iavf_init_version_check sends VIRTCHNL_OP_GET_VF_RESOURCES message, the driver will wait for the response after requeueing the watchdog task in iavf_init_get_resources call stack. The logic is implemented this way that iavf_init_get_resources has to be called in order to allocate adapter->vf_res. It is polling for the AQ response in iavf_get_vf_config function. Expect a call trace from kernel when adminq_task worker handles this message first. adapter->vf_res will be NULL in iavf_virtchnl_completion. Make the watchdog task not queue the adminq_task if the init process is not finished yet. Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines") Signed-off-by:
-
Slawomir Laba authored
iavf_virtchnl_completion is called under crit_lock but when the code for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is called, this lock is released in order to obtain rtnl_lock to avoid ABBA deadlock with unregister_netdev. Along with the new way iavf_remove behaves, there exist many risks related to the lock release and attmepts to regrab it. The driver faces crashes related to races between unregister_netdev and netdev_update_features. Yet another risk is that the driver could already obtain the crit_lock in order to destroy it and iavf_virtchnl_completion could crash or block forever. Make iavf_virtchnl_completion never relock crit_lock in it's call paths. Extract rtnl_lock locking logic to the driver for unregister_netdev in order to set the netdev_registered flag inside the lock. Introduce a new flag that will inform adminq_task to perform the code from VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS right after it finishes processing messages. Guard this code with remove flags so it's never called when the driver is in remove state. Fixes: 5951a2b9 ("iavf: Fix VLAN feature flags after VFR") Signed-off-by:
-
Slawomir Laba authored
When init states of the adapter work, the errors like lack of communication with the PF might hop in. If such events occur the driver restores previous states in order to retry initialization in a proper way. When remove task kicks in, this situation could lead to races with unregistering the netdevice as well as resources cleanup. With the commit introducing the waiting in remove for init to complete, this problem turns into an endless waiting if init never recovers from errors. Introduce __IAVF_IN_REMOVE_TASK bit to indicate that the remove thread has started. Make __IAVF_COMM_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and set the __IAVF_INIT_FAILED state and return without any action instead of trying to recover. Make __IAVF_INIT_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and return without any further actions. Make the loop in the remove handler break when adapter has __IAVF_INIT_FAILED state set. Fixes: 898ef1cb ("iavf: Combine init and watchdog state machines") Signed-off-by:
-
Slawomir Laba authored
There exist races when port is being configured and remove is triggered. unregister_netdev is not and can't be called under crit_lock mutex since it is calling ndo_stop -> iavf_close which requires this lock. Depending on init state the netdev could be still unregistered so unregister_netdev never cleans up, when shortly after that the device could become registered. Make iavf_remove wait until port finishes initialization. All critical state changes are atomic (under crit_lock). Crashes that come from iavf_reset_interrupt_capability and iavf_free_traffic_irqs should now be solved in a graceful manner. Fixes: 605ca7c5 ("iavf: Fix kernel BUG in free_msi_irqs") Signed-off-by:
-
Slawomir Laba authored
The driver used to crash in multiple spots when put to stress testing of the init, reset and remove paths. The user would experience call traces or hangs when creating, resetting, removing VFs. Depending on the machines, the call traces are happening in random spots, like reset restoring resources racing with driver remove. Make adapter->crit_lock mutex a mandatory lock for guarding the operations performed on all workqueues and functions dealing with resource allocation and disposal. Make __IAVF_REMOVE a final state of the driver respected by workqueues that shall not requeue, when they fail to obtain the crit_lock. Make the IRQ handler not to queue the new work for adminq_task when the __IAVF_REMOVE state is set. Fixes: 5ac49f3c ("iavf: use mutexes for locking of critical sections") Signed-off-by:
-
Randy Dunlap authored
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers.") Fixes: f3240e28 ("stmmac: remove warning when compile as built-in (V2)") Signed-off-by:
Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Jose Abreu <joabreu@synopsys.com> Link: https://lore.kernel.org/r/20220224033536.25056-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: acc18c14 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe") Fixes: 1edb9ca6 ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver") Signed-off-by:
-
Lad Prabhakar authored
Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device. Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@bp.renesas.comReported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Casper Andersson authored
Check if operation is valid before changing any settings in hardware. Otherwise it results in changes being made despite it not being a valid operation. Fixes: 78eab33b ("net: sparx5: add vlan support") Signed-off-by:
-
Jia-Ju Bai authored
The function pci_find_capability() in t3_prep_adapter() can fail, so its return value should be checked. Fixes: 4d22de3e ("Add support for the latest 1G/10G Chelsio adapter, T3") Reported-by:
-
David S. Miller authored
Sukadev Bhattiprolu says: ==================== ibmvnic: Fix a race in ibmvnic_probe() If we get a transport (reset) event right after a successful CRQ_INIT during ibmvnic_probe() but before we set the adapter state to VNIC_PROBED, we will throw away the reset assuming that the adapter is still in the probing state. But since the adapter has completed the CRQ_INIT any subsequent CRQs the we send will be ignored by the vnicserver until we release/init the CRQ again. This can leave the adapter unconfigured. While here fix a couple of other bugs that were observed (Patches 1,2,4). ==================== Signed-off-by: -
Sukadev Bhattiprolu authored
We currently don't allow queuing resets when adapter is in VNIC_PROBING state - instead we throw away the reset and return EBUSY. The reasoning is probably that during ibmvnic_probe() the ibmvnic_adapter itself is being initialized so performing a reset during this time can lead us to accessing fields in the ibmvnic_adapter that are not fully initialized. A review of the code shows that all the adapter state neede to process a reset is initialized before registering the CRQ so that should no longer be a concern. Further the expectation is that if we do get a reset (transport event) during probe, the do..while() loop in ibmvnic_probe() will handle this by reinitializing the CRQ. While that is true to some extent, it is possible that the reset might occur _after_ the CRQ is registered and CRQ_INIT message was exchanged but _before_ the adapter state is set to VNIC_PROBED. As mentioned above, such a reset will be thrown away. While the client assumes that the adapter is functional, the vnic server will wait for the client to reinit the adapter. This disconnect between the two leaves the adapter down needing manual intervention. Because ibmvnic_probe() has other work to do after initializing the CRQ (such as registering the netdev at a minimum) and because the reset event can occur at any instant after the CRQ is initialized, there will always be a window between initializing the CRQ and considering the adapter ready for resets (ie state == PROBED). So rather than discarding resets during this window, allow queueing them - but only process them after the adapter is fully initialized. To do this, introduce a new completion state ->probe_done and have the reset worker thread wait on this before processing resets. This change brings up two new situations in or just after ibmvnic_probe(). First after one or more resets were queued, we encounter an error and decide to retry the initialization. At that point the queued resets are no longer relevant since we could be talking to a new vnic server. So we must purge/flush the queued resets before restarting the initialization. As a side note, since we are still in the probing stage and we have not registered the netdev, it will not be CHANGE_PARAM reset. Second this change opens up a potential race between the worker thread in __ibmvnic_reset(), the tasklet and the ibmvnic_open() due to the following sequence of events: 1. Register CRQ 2. Get transport event before CRQ_INIT completes. 3. Tasklet schedules reset: a) add rwi to list b) schedule_work() to start worker thread which runs and waits for ->probe_done. 4. ibmvnic_probe() decides to retry, purges rwi_list 5. Re-register crq and this time rest of probe succeeds - register netdev and complete(->probe_done). 6. Worker thread resumes in __ibmvnic_reset() from 3b. 7. Worker thread sets ->resetting bit 8. ibmvnic_open() comes in, notices ->resetting bit, sets state to IBMVNIC_OPEN and returns early expecting worker thread to finish the open. 9. Worker thread finds rwi_list empty and returns without opening the interface. If this happens, the ->ndo_open() call is effectively lost and the interface remains down. To address this, ensure that ->rwi_list is not empty before setting the ->resetting bit. See also comments in __ibmvnic_reset(). Fixes: 6a2fb0e9 ("ibmvnic: driver initialization for kdump/kexec") Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
Clear ->failover_pending flag that may have been set in the previous pass of registering CRQ. If we don't clear, a subsequent ibmvnic_open() call would be misled into thinking a failover is pending and assuming that the reset worker thread would open the adapter. If this pass of registering the CRQ succeeds (i.e there is no transport event), there wouldn't be a reset worker thread. This would leave the adapter unconfigured and require manual intervention to bring it up during boot. Fixes: 5a18e1e0 ("ibmvnic: Fix failover case for non-redundant configuration") Signed-off-by:
-
Sukadev Bhattiprolu authored
We currently initialize the ->init_done completion/return code fields before issuing a CRQ_INIT command. But if we get a transport event soon after registering the CRQ the taskslet may already have recorded the completion and error code. If we initialize here, we might overwrite/ lose that and end up issuing the CRQ_INIT only to timeout later. If that timeout happens during probe, we will leave the adapter in the DOWN state rather than retrying to register/init the CRQ. Initialize the completion before registering the CRQ so we don't lose the notification. Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol") Signed-off-by:
-
Sukadev Bhattiprolu authored
Finish initializing the adapter before registering netdev so state is consistent. Fixes: c26eba03 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by:
-
Sukadev Bhattiprolu authored
If we get a transport event, set the error and mark the init as complete so the attempt to send crq-init or login fail sooner rather than wait for the timeout. Fixes: bbd669a8 ("ibmvnic: Fix completion structure initialization") Signed-off-by:
-
Sukadev Bhattiprolu authored
Define and use a helper to flush the reset queue. Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery") Signed-off-by:
-
Sukadev Bhattiprolu authored
We should initialize ->init_done_rc before calling complete(). Otherwise the waiting thread may see ->init_done_rc as 0 before we have updated it and may assume that the CRQ was successful. Fixes: 6b278c0c ("ibmvnic delay complete()") Signed-off-by:
-
