- 26 Apr, 2023 25 commits
-
-
Jakob Hauser authored
Fix comments and remove some empty lines in rt5033-private.h. Align struct rt5033_charger in rt5033.h. Signed-off-by:
Jakob Hauser <jahau@rocketmail.com> Signed-off-by:
Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/606950da6f4b36f5a124ff13756c78644fc89804.1677620677.git.jahau@rocketmail.com
-
Mukesh Ojha authored
Document the qcom,sm8450-tcsr compatible. Signed-off-by:
Mukesh Ojha <quic_mojha@quicinc.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Matthias Schiffer authored
It seems that this driver was developed based on preliminary documentation. Report the correct names for all TQMxE39x variants, as they are used by the released hardware revisions: - Fix names for TQMxE39C1/C2 board IDs - Distinguish TQMxE39M and TQMxE39S, which use the same board ID The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate Uses Configuration) register of the GPIO controller. This also prepares for the correct handling of the differences between the GPIO controllers of our COMe and SMARC modules. Fixes: 2f17dd34 ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO") Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Matthias Schiffer authored
Registers 0x160..0x17f are unassigned. Use 0x180 as base register and update offets accordingly. Also change the size of the range to include 0x19f. While 0x19f is currently reserved for future extensions, so are several of the previous registers up to 0x19e, and it is weird to leave out just the last one. Fixes: 2f17dd34 ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO") Signed-off-by:
-
Matthias Schiffer authored
The I2C_DETECT register is at IO port 0x1a7, which is outside the range passed to devm_ioport_map() for io_base, and was only working because there aren't actually any bounds checks for IO port accesses. Extending the range does not seem like a good solution here, as it would then conflict with the IO resource assigned to the I2C controller. As this is just a one-off access during probe, use a simple inb() instead. While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN. Fixes: 2f17dd34 ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO") Signed-off-by:
-
Emil Renner Berthing authored
Document StarFive JH7100 SoC compatible for sysmain registers. Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by:
-
Nick Alcock authored
Since commit 8b41fc44 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Suggested-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
Nick Alcock <nick.alcock@oracle.com> Reviewed-by:
Andy Shevchenko <andy@kernel.org> Signed-off-by:
-
Nick Alcock authored
Since commit 8b41fc44 ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are used to identify modules. As a consequence, uses of the macro in non-modules will cause modprobe to misidentify their containing object file as a module when it is not (false positives), and modprobe might succeed rather than failing with a suitable error message. So remove it in the files in this commit, none of which can be built as modules. Suggested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Aidan MacDonald authored
Remove pm8008_init(), which according to the comments exists only as a workaround for regmap-irq's odd treatment of type registers. This workaround shouldn't be needed anymore because this driver uses config registers, which are always programmed by regmap-irq no matter what the initial register state is. Signed-off-by:
Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Signed-off-by:
-
Aidan MacDonald authored
Replace the deprecated not_fixed_stride flag and the associated hierarchy of offsets with a .get_irq_reg() callback. Signed-off-by:
-
Aidan MacDonald authored
Replace type and virtual registers, which are both deprecated, with config registers. This also simplifies the driver because IRQ types are set in one place, the set_type_config() callback. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Aidan MacDonald authored
The usual behavior of mask registers is writing a '1' bit to disable (mask) an interrupt; similarly, writing a '1' bit to an unmask register enables (unmasks) an interrupt. Due to a longstanding issue in regmap-irq, mask and unmask registers were inverted when both kinds of registers were present on the same chip, ie. regmap-irq actually wrote '1's to the mask register to enable an IRQ and '1's to the unmask register to disable an IRQ. This was fixed by commit e8ffb12e ("regmap-irq: Fix inverted handling of unmask registers") but the fix is opt-in via mask_unmask_non_inverted = true because it requires manual changes for each affected driver. The new behavior will become the default once all drivers have been updated. The PM8008 appears to rely on the inverted behavior. It has separate set & clear registers for a register called INT_EN, which presumably enables interrupts by writing '1's. Opt in to the new non-inverted behavior & swap mask_base/unmask_base. Signed-off-by:
-
Poovendhan Selvaraj authored
Add the tcsr compatible string for IPQ9574 SoC Signed-off-by:
Poovendhan Selvaraj <quic_poovendh@quicinc.com> Acked-by:
-
Christophe JAILLET authored
Group some variables based on their sizes to reduce hole and avoid padding. On x86_64, this shrinks the size from 144 to 128 bytes. As an example: $ size drivers/mfd/as3722.o (Before) text data bss dec hex filename 9441 680 16 10137 2799 drivers/mfd/as3722.o $ size drivers/mfd/as3722.o (After) text data bss dec hex filename 9345 680 16 10041 2739 drivers/mfd/as3722.o Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Konrad Dybcio authored
This was omitted when adding the RRADC bindings. Fixes: 7ea58c95 ("dt-bindings: iio: adc: document qcom-spmi-rradc") Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
-
Ye Xingchen authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Ye Xingchen <ye.xingchen@zte.com.cn> Reviewed-by:
-
Ye Xingchen authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by:
-
Ye Xingchen authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Ye Xingchen authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Ye Xingchen authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Ye Xingchen authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Jackie Liu authored
Fix some typo, find by 'codespell drivers/mfd/si476x-cmd.c' succsess -> success interace -> interface comand -> command failre -> failure Reported-by:
k2ci <kernel-bot@kylinos.cn> Signed-off-by:
Jackie Liu <liuyun01@kylinos.cn> Signed-off-by:
-
Hans de Goede authored
The Android Lenovo Yoga Book X90F / X90L uses the same charger / fuelgauge setup as the already supported Windows Lenovo Yoga Book X91F/L, add a DMI match for this to intel_cht_wc_models with driver_data set to INTEL_CHT_WC_LENOVO_YOGABOOK1. When the quirk for the X91F/L was initially added it was written to also apply to the X90F/L but this does not work because the Android version of the Yoga Book uses completely different DMI strings. Also adjust the X91F/L quirk to reflect that it only applies to the X91F/L models. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
David Virag authored
The S5M8763 MFD has no device tree compatible, and since board file support for it was removed, there's no way to use this MFD. After removing the remaining code for it from the MFD driver, also remove support for it in the s5m RTC driver, and all remaining references to it. Signed-off-by:
David Virag <virag.david003@gmail.com> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by:
-
David Virag authored
The S5M8751 and S5M8763 PMIC chips have no corresponding compatible values, so since board file support was removed for this driver, there is no way to specify these PMICs as present in boards anymore. Remove leftovers of these chips since it's dead code. Signed-off-by:
-
- 05 Apr, 2023 1 commit
-
-
William Breathitt Gray authored
Allow the struct regmap_irq_chip set_type_config() callback to access irq_drv_data by passing it as a parameter. Signed-off-by:
William Breathitt Gray <william.gray@linaro.org> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20e15cd3afae80922b7e0577c7741df86b3390c5.1680708357.git.william.gray@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 19 Mar, 2023 14 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix setting affinity of hwlat threads in containers Using sched_set_affinity() has unwanted side effects when being called within a container. Use set_cpus_allowed_ptr() instead - Fix per cpu thread management of the hwlat tracer: - Do not start per_cpu threads if one is already running for the CPU - When starting per_cpu threads, do not clear the kthread variable as it may already be set to running per cpu threads - Fix return value for test_gen_kprobe_cmd() On error the return value was overwritten by being set to the result of the call from kprobe_event_delete(), which would likely succeed, and thus have the function return success - Fix splice() reads from the trace file that was broken by commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") - Remove obsolete and confusing comment in ring_buffer.c The original design of the ring buffer used struct page flags for tricks to optimize, which was shortly removed due to them being tricks. But a comment for those tricks remained - Set local functions and variables to static * tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr ring-buffer: remove obsolete comment for free_buffer_page() tracing: Make splice_read available again ftrace: Set direct_ops storage-class-specifier to static trace/hwlat: Do not start per-cpu thread if it is already running trace/hwlat: Do not wipe the contents of per-cpu thread data tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static tracing: Fix wrong return in kprobe_event_gen_test.c -
Costa Shulyupin authored
There is a problem with the behavior of hwlat in a container, resulting in incorrect output. A warning message is generated: "cpumask changed while in round-robin mode, switching to mode none", and the tracing_cpumask is ignored. This issue arises because the kernel thread, hwlatd, is not a part of the container, and the function sched_setaffinity is unable to locate it using its PID. Additionally, the task_struct of hwlatd is already known. Ultimately, the function set_cpus_allowed_ptr achieves the same outcome as sched_setaffinity, but employs task_struct instead of PID. Test case: # cd /sys/kernel/tracing # echo 0 > tracing_on # echo round-robin > hwlat_detector/mode # echo hwlat > current_tracer # unshare --fork --pid bash -c 'echo 1 > tracing_on' # dmesg -c Actual behavior: [573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 0330f7aa ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by:
Costa Shulyupin <costa.shul@redhat.com> Acked-by:
Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Vlastimil Babka authored
The comment refers to mm/slob.c which is being removed. It comes from commit ed56829c ("ring_buffer: reset buffer page when freeing") and according to Steven the borrowed code was a page mapcount and mapping reset, which was later removed by commit e4c2ce82 ("ring_buffer: allocate buffer page pointer"). Thus the comment is not accurate anyway, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Reported-by:
Mike Rapoport <mike.rapoport@gmail.com> Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
-
Sung-hun Kim authored
Since the commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") is applied to the kernel, splice() and sendfile() calls on the trace file (/sys/kernel/debug/tracing /trace) return EINVAL. This patch restores these system calls by initializing splice_read in file_operations of the trace file. This patch only enables such functionalities for the read case. Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com Cc: stable@vger.kernel.org Fixes: 36e2c742 ("fs: don't allow splice read/write without explicit ops") Signed-off-by:
Sung-hun Kim <sfoon.kim@samsung.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve some reported issues. They include: - 8250 driver Kconfig issue pointed out by you that showed up in -rc1 - qcom-geni serial driver fixes - various 8250 driver fixes for reported problems - fsl_lpuart driver fixes - serdev fix for regression in -rc1 - vt.c bugfix All have been in linux-next for over a week with no reported problems" * tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: protect KD_FONT_OP_GET_TALL from unbound access serial: qcom-geni: drop bogus uart_write_wakeup() serial: qcom-geni: fix mapping of empty DMA buffer serial: qcom-geni: fix DMA mapping leak on shutdown serial: qcom-geni: fix console shutdown hang serdev: Set fwnode for serdev devices tty: serial: fsl_lpuart: fix race on RX DMA shutdown serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default serial: 8250_fsl: fix handle_irq locking serial: 8250_em: Fix UART port type serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a few small char/misc/other driver subsystem patches to resolve reported problems for 6.3-rc3. Included in here are: - Interconnect driver fixes for reported problems - Memory driver fixes for reported problems - nvmem core fix - firmware driver fix for reported problem All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits) memory: tegra30-emc: fix interconnect registration race memory: tegra20-emc: fix interconnect registration race memory: tegra124-emc: fix interconnect registration race memory: tegra: fix interconnect registration race interconnect: exynos: drop redundant link destroy interconnect: exynos: fix registration race interconnect: exynos: fix node leak in probe PM QoS error path interconnect: qcom: msm8974: fix registration race interconnect: qcom: rpmh: fix registration race interconnect: qcom: rpmh: fix probe child-node error handling interconnect: qcom: rpm: fix registration race nvmem: core: return -ENOENT if nvmem cell is not found firmware: xilinx: don't make a sleepable memory allocation from an atomic context interconnect: qcom: rpm: fix probe child-node error handling interconnect: qcom: osm-l3: fix registration race interconnect: imx: fix registration race interconnect: fix provider registration API interconnect: fix icc_provider_del() error handling interconnect: fix mem leak when freeing nodes interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fix from Borislav Petkov: - Flush out logged errors immediately after MCA banks configuration changes over sysfs have been done instead of waiting until something else triggers the workqueue later - another error or the polling interval cycle is reached * tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make sure logged MCEs are processed after sysfs update
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Check whether sibling events have been deactivated before adding them to groups - Update the proper event time tracking variable depending on the event type - Fix a memory overwrite issue due to using the wrong function argument when outputting perf events * tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix check before add_event_to_groups() in perf_group_detach() perf: fix perf_event_context->time perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "There's a little bit more 'movement' in there for my taste but it needs to happen and should make the code better after it. - Check cmdline_find_option()'s return value before further processing - Clear temporary storage in the resctrl code to prevent access to an unexistent MSR - Add a simple throttling mechanism to protect the hypervisor from potentially malicious SEV guests issuing requests in rapid succession. In order to not jeopardize the sanity of everyone involved in maintaining this code, the request issuing side has received a cleanup, split in more or less trivial, small and digestible pieces. Otherwise, the code was threatening to become an unmaintainable mess. Therefore, that cleanup is marked indirectly also for stable so that there's no differences between the upstream code and the stable variant when it comes down to backporting more there" * tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix use of uninitialized buffer in sme_enable() x86/resctrl: Clear staged_config[] before and after it is used virt/coco/sev-guest: Add throttling awareness virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case virt/coco/sev-guest: Do some code style cleanups virt/coco/sev-guest: Carve out the request issuing logic into a helper virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request() virt/coco/sev-guest: Simplify extended guest request handling virt/coco/sev-guest: Check SEV_SNP attribute at probe time -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fix from Ted Ts'o: "Fix a double unlock bug on an error path in ext4, found by smatch and syzkaller" * tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix possible double unlock when moving a directory
-
Tom Rix authored
smatch reports this warning kernel/trace/ftrace.c:2594:19: warning: symbol 'direct_ops' was not declared. Should it be static? The variable direct_ops is only used in ftrace.c, so it should be static Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.comSigned-off-by:
Tom Rix <trix@redhat.com> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by:
-
Tero Kristo authored
The hwlatd tracer will end up starting multiple per-cpu threads with the following script: #!/bin/sh cd /sys/kernel/debug/tracing echo 0 > tracing_on echo hwlat > current_tracer echo per-cpu > hwlat_detector/mode echo 100000 > hwlat_detector/width echo 200000 > hwlat_detector/window echo 1 > tracing_on To fix the issue, check if the hwlatd thread for the cpu is already running, before starting a new one. Along with the previous patch, this avoids running multiple instances of the same CPU thread on the system. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by:Tero Kristo <tero.kristo@linux.intel.com> Acked-by:
-
Tero Kristo authored
Do not wipe the contents of the per-cpu kthread data when starting the tracer, as this will completely forget about already running instances and can later start new additional per-cpu threads. Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/ Link: https://lkml.kernel.org/r/20230310100451.3948583-2-tero.kristo@linux.intel.com Cc: stable@vger.kernel.org Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode") Signed-off-by:
-
