- 17 Oct, 2019 40 commits
-
-
Steven Rostedt (VMware) authored
commit 194c2c74 upstream. As instances may have different tracers available, we need to look at the trace_array descriptor that shows the list of the available tracers for the instance. But there's a race between opening the file and an admin deleting the instance. The trace_array_get() needs to be called before accessing the trace_array. Cc: stable@vger.kernel.org Fixes: 607e2ea1 ("tracing: Set up infrastructure to allow tracers for instances") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit 9ef16693 upstream. The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for an instance now. They need to take a reference to the instance otherwise there could be a race between accessing the files and deleting the instance. It wasn't until the :mod: caching where these file operations started referencing the trace_array directly. Cc: stable@vger.kernel.org Fixes: 673feb9d ("ftrace: Add :mod: caching infrastructure to trace_array") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srivatsa S. Bhat (VMware) authored
commit fc64e4ad upstream. max_latency is intended to record the maximum ever observed hardware latency, which may occur in either part of the loop (inner/outer). So we need to also consider the outer-loop sample when updating max_latency. Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu Fixes: e7c15cd8 ("tracing: Added hardware latency tracer") Cc: stable@vger.kernel.org Signed-off-by:
Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srivatsa S. Bhat (VMware) authored
commit 98dc19c1 upstream. nmi_total_ts is supposed to record the total time spent in *all* NMIs that occur on the given CPU during the (active portion of the) sampling window. However, the code seems to be overwriting this variable for each NMI, thereby only recording the time spent in the most recent NMI. Fix it by accumulating the duration instead. Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu Fixes: 7b2c8625 ("tracing: Add NMI tracing in hwlat detector") Cc: stable@vger.kernel.org Signed-off-by:
Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masayoshi Mizuma authored
commit 4585fc59 upstream. The system which has SVE feature crashed because of the memory pointed by task->thread.sve_state was destroyed by someone. That is because sve_state is freed while the forking the child process. The child process has the pointer of sve_state which is same as the parent's because the child's task_struct is copied from the parent's one. If the copy_process() fails as an error on somewhere, for example, copy_creds(), then the sve_state is freed even if the parent is alive. The flow is as follows. copy_process p = dup_task_struct => arch_dup_task_struct *dst = *src; // copy the entire region. : retval = copy_creds if (retval < 0) goto bad_fork_free; : bad_fork_free: ... delayed_free_task(p); => free_task => arch_release_task_struct => fpsimd_release_task => __sve_free => kfree(task->thread.sve_state); // free the parent's sve_state Move child's sve_state = NULL and clearing TIF_SVE flag to arch_dup_task_struct() so that the child doesn't free the parent's one. There is no need to wait until copy_process() to clear TIF_SVE for dst, because the thread flags for dst are initialized already by copying the src task_struct. This change simplifies the code, so get rid of comments that are no longer needed. As a note, arm64 used to have thread_info on the stack. So it would not be possible to clear TIF_SVE until the stack is initialized. From commit c02433dd ("arm64: split thread_info from task stack"), the thread_info is part of the task, so it should be valid to modify the flag from arch_dup_task_struct(). Cc: stable@vger.kernel.org # 4.15.x- Fixes: bc0ee476 ("arm64/sve: Core task context handling") Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reported-by:
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Suggested-by:
Dave Martin <Dave.Martin@arm.com> Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Tested-by:
Julien Grall <julien.grall@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 30045f21 upstream. Since commit c2b71462 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Note that runtime PM has never actually been enabled for this driver since the support_autosuspend flag in its usb_driver struct is not set. Fixes: c2b71462 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Acked-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191001084908.2003-5-johan@kernel.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit d4f4de5e upstream. There are two problems in dcache_readdir() - one is that lockless traversal of the list needs non-trivial cooperation of d_alloc() (at least a switch to list_add_rcu(), and probably more than just that) and another is that it assumes that no removal will happen without the directory locked exclusive. Said assumption had always been there, never had been stated explicitly and is violated by several places in the kernel (devpts and selinuxfs). * replacement of next_positive() with different calling conventions: it returns struct list_head * instead of struct dentry *; the latter is passed in and out by reference, grabbing the result and dropping the original value. * scan is under ->d_lock. If we run out of timeslice, cursor is moved after the last position we'd reached and we reschedule; then the scan continues from that place. To avoid livelocks between multiple lseek() (with cursors getting moved past each other, never reaching the real entries) we always skip the cursors, need_resched() or not. * returned list_head * is either ->d_child of dentry we'd found or ->d_subdirs of parent (if we got to the end of the list). * dcache_readdir() and dcache_dir_lseek() switched to new helper. dcache_readdir() always holds a reference to dentry passed to dir_emit() now. Cursor is moved to just before the entry where dir_emit() has failed or into the very end of the list, if we'd run out. * move_cursor() eliminated - it had sucky calling conventions and after fixing that it became simply list_move() (in lseek and scan_positives) or list_move_tail() (in readdir). All operations with the list are under ->d_lock now, and we do not depend upon having all file removals done with parent locked exclusive anymore. Cc: stable@vger.kernel.org Reported-by:
"zhengbin (A)" <zhengbin13@huawei.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeremy Linton authored
Commit 98dc1990 upstream. ACPI 6.3 adds a thread flag to represent if a CPU/PE is actually a thread. Given that the MPIDR_MT bit may not represent this information consistently on homogeneous machines we should prefer the PPTT flag if its available. Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Reviewed-by:
Sudeep Holla <sudeep.holla@arm.com> Reviewed-by:
Robert Richter <rrichter@marvell.com> [will: made acpi_cpu_is_threaded() return 'bool'] Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jeremy Linton authored
Commit bbd1b706 upstream. ACPI 6.3 adds a flag to the CPU node to indicate whether the given PE is a thread. Add a function to return that information for a given linux logical CPU. Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Reviewed-by:
Sudeep Holla <sudeep.holla@arm.com> Reviewed-by:
Robert Richter <rrichter@marvell.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Will Deacon <will@kernel.org> [jpg: backport for 4.19, replace acpi_pptt_warn_missing()] Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Erik Schmauss authored
Commit b5eab512 upstream. ACPICA commit c736ea34add19a3a07e0e398711847cd6b95affd Link: https://github.com/acpica/acpica/commit/c736ea34Signed-off-by:
Erik Schmauss <erik.schmauss@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jiaxun Yang authored
commit 38dffe1e upstream. A Golang developer reported MIPS hwcap isn't reflecting instructions that the processor actually supported so programs can't apply optimized code at runtime. Thus we export the ASEs that can be used in userspace programs. Reported-by:
Meng Zhuo <mengzhuo1203@gmail.com> Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org Cc: Paul Burton <paul.burton@mips.com> Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Paul Burton <paul.burton@mips.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Burton authored
commit 2f2b4fd6 upstream. GCC 9.x automatically enables support for Loongson MMI instructions when using some -march= flags, and then errors out when -msoft-float is specified with: cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’ The kernel shouldn't be using these MMI instructions anyway, just as it doesn't use floating point instructions. Explicitly disable them in order to fix the build with GCC 9.x. Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: 3702bba5 ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E") Fixes: 6f7a251a ("MIPS: Loongson: Add basic Loongson 2F support") Fixes: 5188129b ("MIPS: Loongson-3: Improve -march option and move it to Platform") Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: stable@vger.kernel.org # v2.6.32+ Cc: linux-mips@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit 031d73ed upstream. When a series of O_DIRECT reads or writes are truncated, either due to eof or due to an error, then we should return the number of contiguous bytes that were received/sent starting at the offset specified by the application. Currently, we are failing to correctly check contiguity, and so we're failing the generic/465 in xfstests when the race between the read and write RPCs causes the file to get extended while the 2 reads are outstanding. If the first read RPC call wins the race and returns with eof set, we should treat the second read RPC as being truncated. Reported-by:
Su Yanjun <suyj.fnst@cn.fujitsu.com> Fixes: 1ccbad9f ("nfs: fix DIO good bytes calculation") Cc: stable@vger.kernel.org # 4.1+ Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josef Bacik authored
commit c5f4987e upstream. Coverity caught a case where we could return with a uninitialized value in ret in process_leaf. This is actually pretty likely because we could very easily run into a block group item key and have a garbage value in ret and think there was an errror. Fix this by initializing ret to 0. Reported-by:
Colin Ian King <colin.king@canonical.com> Fixes: fd708b81 ("Btrfs: add a extent ref verify tool") CC: stable@vger.kernel.org # 4.19+ Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josef Bacik authored
commit 4203e968 upstream. We've historically had reports of being unable to mount file systems because the tree log root couldn't be read. Usually this is the "parent transid failure", but could be any of the related errors, including "fsid mismatch" or "bad tree block", depending on which block got allocated. The modification of the individual log root items are serialized on the per-log root root_mutex. This means that any modification to the per-subvol log root_item is completely protected. However we update the root item in the log root tree outside of the log root tree log_mutex. We do this in order to allow multiple subvolumes to be updated in each log transaction. This is problematic however because when we are writing the log root tree out we update the super block with the _current_ log root node information. Since these two operations happen independently of each other, you can end up updating the log root tree in between writing out the dirty blocks and setting the super block to point at the current root. This means we'll point at the new root node that hasn't been written out, instead of the one we should be pointing at. Thus whatever garbage or old block we end up pointing at complains when we mount the file system later and try to replay the log. Fix this by copying the log's root item into a local root item copy. Then once we're safely under the log_root_tree->log_mutex we update the root item in the log_root_tree. This way we do not modify the log_root_tree while we're committing it, fixing the problem. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Chris Mason <clm@fb.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Wysochanski authored
commit cb248819 upstream. Commit 487317c9 ("cifs: add spinlock for the openFileList to cifsInodeInfo") added cifsInodeInfo->open_file_lock spin_lock to protect the openFileList, but missed a few places where cifs_inode->openFileList was enumerated. Change these remaining tcon->open_file_lock to cifsInodeInfo->open_file_lock to avoid panic in is_size_safe_to_change. [17313.245641] RIP: 0010:is_size_safe_to_change+0x57/0xb0 [cifs] [17313.245645] Code: 68 40 48 89 ef e8 19 67 b7 f1 48 8b 43 40 48 8d 4b 40 48 8d 50 f0 48 39 c1 75 0f eb 47 48 8b 42 10 48 8d 50 f0 48 39 c1 74 3a <8b> 80 88 00 00 00 83 c0 01 a8 02 74 e6 48 89 ef c6 07 00 0f 1f 40 [17313.245649] RSP: 0018:ffff94ae1baefa30 EFLAGS: 00010202 [17313.245654] RAX: dead000000000100 RBX: ffff88dc72243300 RCX: ffff88dc72243340 [17313.245657] RDX: dead0000000000f0 RSI: 00000000098f7940 RDI: ffff88dd3102f040 [17313.245659] RBP: ffff88dd3102f040 R08: 0000000000000000 R09: ffff94ae1baefc40 [17313.245661] R10: ffffcdc8bb1c4e80 R11: ffffcdc8b50adb08 R12: 00000000098f7940 [17313.245663] R13: ffff88dc72243300 R14: ffff88dbc8f19600 R15: ffff88dc72243428 [17313.245667] FS: 00007fb145485700(0000) GS:ffff88dd3e000000(0000) knlGS:0000000000000000 [17313.245670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [17313.245672] CR2: 0000026bb46c6000 CR3: 0000004edb110003 CR4: 00000000007606e0 [17313.245753] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [17313.245756] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [17313.245759] PKRU: 55555554 [17313.245761] Call Trace: [17313.245803] cifs_fattr_to_inode+0x16b/0x580 [cifs] [17313.245838] cifs_get_inode_info+0x35c/0xa60 [cifs] [17313.245852] ? kmem_cache_alloc_trace+0x151/0x1d0 [17313.245885] cifs_open+0x38f/0x990 [cifs] [17313.245921] ? cifs_revalidate_dentry_attr+0x3e/0x350 [cifs] [17313.245953] ? cifsFileInfo_get+0x30/0x30 [cifs] [17313.245960] ? do_dentry_open+0x132/0x330 [17313.245963] do_dentry_open+0x132/0x330 [17313.245969] path_openat+0x573/0x14d0 [17313.245974] do_filp_open+0x93/0x100 [17313.245979] ? __check_object_size+0xa3/0x181 [17313.245986] ? audit_alloc_name+0x7e/0xd0 [17313.245992] do_sys_open+0x184/0x220 [17313.245999] do_syscall_64+0x5b/0x1b0 Fixes: 487317c9 ("cifs: add spinlock for the openFileList to cifsInodeInfo") CC: Stable <stable@vger.kernel.org> Signed-off-by:
Dave Wysochanski <dwysocha@redhat.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabrice Gasnier authored
[ Upstream commit dcb10920 ] End of conversion may be handled by using IRQ or DMA. There may be a race when two conversions complete at the same time on several ADCs. EOC can be read as 'set' for several ADCs, with: - an ADC configured to use IRQs. EOCIE bit is set. The handler is normally called in this case. - an ADC configured to use DMA. EOCIE bit isn't set. EOC triggers the DMA request instead. It's then automatically cleared by DMA read. But the handler gets called due to status bit is temporarily set (IRQ triggered by the other ADC). So both EOC status bit in CSR and EOCIE control bit must be checked before invoking the interrupt handler (e.g. call ISR only for IRQ-enabled ADCs). Fixes: 2763ea05 ("iio: adc: stm32: add optional dma support") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Fabrice Gasnier authored
[ Upstream commit 31922f62 ] Move STM32 ADC registers definitions to common header. This is precursor patch to: - iio: adc: stm32-adc: fix a race when using several adcs with dma and irq It keeps registers definitions as a whole block, to ease readability and allow simple access path to EOC bits (readl) in stm32-adc-core driver. Fixes: 2763ea05 ("iio: adc: stm32: add optional dma support") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Bartosz Golaszewski authored
[ Upstream commit e735244e ] When emulating open-drain/open-source by not actively driving the output lines - we're simply changing their mode to input. This is wrong as it will then make it impossible to change the value of such line - it's now considered to actually be in input mode. If we want to still use the direction_input() callback for simplicity then we need to set FLAG_IS_OUT manually in gpiod_direction_output() and not clear it in gpio_set_open_drain_value_commit() and gpio_set_open_source_value_commit(). Fixes: c663e5f5 ("gpio: support native single-ended hardware drivers") Cc: stable@vger.kernel.org Reported-by:
Kent Gibson <warthog618@gmail.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> [Bartosz: backported to v5.3, v4.19] Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Brian Norris authored
[ Upstream commit 442f1e74 ] Commit 4b708b7b ("firmware: google: check if size is valid when decoding VPD data") adds length checks, but the new vpd_decode_entry() function botched the logic -- it adds the key length twice, instead of adding the key and value lengths separately. On my local system, this means vpd.c's vpd_section_create_attribs() hits an error case after the first attribute it parses, since it's no longer looking at the correct offset. With this patch, I'm back to seeing all the correct attributes in /sys/firmware/vpd/... Fixes: 4b708b7b ("firmware: google: check if size is valid when decoding VPD data") Cc: <stable@vger.kernel.org> Cc: Hung-Te Lin <hungte@chromium.org> Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20190930214522.240680-1-briannorris@chromium.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
commit 518a8671 upstream. The "mode" and "level" variables are enums and in this context GCC will treat them as unsigned ints so the error handling is never triggered. I also removed the bogus initializer because it isn't required any more and it's sort of confusing. [akpm@linux-foundation.org: reduce implicit and explicit typecasting] [akpm@linux-foundation.org: fix return value, add comment, per Matthew] Link: http://lkml.kernel.org/r/20190925110449.GO3264@mwanda Fixes: 3cadfa2b ("mm/vmpressure.c: convert to use match_string() helper") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
David Rientjes <rientjes@google.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Enrico Weigelt <info@metux.net> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Hocko authored
commit b0f53dbc upstream. Partially revert 16db3d3f ("kernel/sysctl.c: threads-max observe limits") because the patch is causing a regression to any workload which needs to override the auto-tuning of the limit provided by kernel. set_max_threads is implementing a boot time guesstimate to provide a sensible limit of the concurrently running threads so that runaways will not deplete all the memory. This is a good thing in general but there are workloads which might need to increase this limit for an application to run (reportedly WebSpher MQ is affected) and that is simply not possible after the mentioned change. It is also very dubious to override an admin decision by an estimation that doesn't have any direct relation to correctness of the kernel operation. Fix this by dropping set_max_threads from sysctl_max_threads so any value is accepted as long as it fits into MAX_THREADS which is important to check because allowing more threads could break internal robust futex restriction. While at it, do not use MIN_THREADS as the lower boundary because it is also only a heuristic for automatic estimation and admin might have a good reason to stop new threads to be created even when below this limit. This became more severe when we switched x86 from 4k to 8k kernel stacks. Starting since 6538b8ea ("x86_64: expand kernel stack to 16K") (3.16) we use THREAD_SIZE_ORDER = 2 and that halved the auto-tuned value. In the particular case 3.12 kernel.threads-max = 515561 4.4 kernel.threads-max = 200000 Neither of the two values is really insane on 32GB machine. I am not sure we want/need to tune the max_thread value further. If anything the tuning should be removed altogether if proven not useful in general. But we definitely need a way to override this auto-tuning. Link: http://lkml.kernel.org/r/20190922065801.GB18814@dhcp22.suse.cz Fixes: 16db3d3f ("kernel/sysctl.c: threads-max observe limits") Signed-off-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Shilovsky authored
commit 0b3d0ef9 upstream. Mark inode for force revalidation if LOOKUP_REVAL flag is set. This tells the client to actually send a QueryInfo request to the server to obtain the latest metadata in case a directory or a file were changed remotely. Only do that if the client doesn't have a lease for the file to avoid unneeded round trips to the server. Cc: <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Shilovsky authored
commit c82e5ac7 upstream. Currently the client indicates that a dentry is stale when inode numbers or type types between a local inode and a remote file don't match. If this is the case attributes is not being copied from remote to local, so, it is already known that the local copy has stale metadata. That's why the inode needs to be marked for revalidation in order to tell the VFS to lookup the dentry again before openning a file. This prevents unexpected stale errors to be returned to the user space when openning a file. Cc: <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Shilovsky authored
commit 30573a82 upstream. Currently if the client identifies problems when processing metadata returned in CREATE response, the open handle is being leaked. This causes multiple problems like a file missing a lease break by that client which causes high latencies to other clients accessing the file. Another side-effect of this is that the file can't be deleted. Fix this by closing the file after the client hits an error after the file was opened and the open descriptor wasn't returned to the user space. Also convert -ESTALE to -EOPENSTALE to allow the VFS to revalidate a dentry and retry the open. Cc: <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Harshad Shirwadkar authored
commit b84477d3 upstream. scale_up wakes up waiters after scaling up. But after scaling max, it should not wake up more waiters as waiters will not have anything to do. This patch fixes this by making scale_up (and also scale_down) return when threshold is reached. This bug causes increased fdatasync latency when fdatasync and dd conv=sync are performed in parallel on 4.19 compared to 4.14. This bug was introduced during refactoring of blk-wbt code. Fixes: a7905043 ("blk-rq-qos: refactor out common elements of blk-wbt") Cc: stable@vger.kernel.org Cc: Josef Bacik <jbacik@fb.com> Signed-off-by:
Harshad Shirwadkar <harshadshirwadkar@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steve MacLean authored
commit b59711e9 upstream. During perf inject --jit, JIT_CODE_MOVE records were injecting MMAP records with an incorrect filename. Specifically it was missing the ".so" suffix. Further the JIT_CODE_LOAD record were silently truncating the jr->load.code_index field to 32 bits before generating the filename. Make both records emit the same filename based on the full 64 bit code_index field. Fixes: 9b07e27f ("perf inject: Add jitdump mmap injection support") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
Steve MacLean <Steve.MacLean@Microsoft.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brian Robbins <brianrob@microsoft.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com> Cc: John Keeping <john@metanate.com> Cc: John Salem <josalem@microsoft.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom McDonald <thomas.mcdonald@microsoft.com> Link: http://lore.kernel.org/lkml/BN8PR21MB1362FF8F127B31DBF4121528F7800@BN8PR21MB1362.namprd21.prod.outlook.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Rogers authored
commit 7d4c85b7 upstream. The 'test_dir' variable is assigned to the 'release' array which is out-of-scope 3 lines later. Extend the scope of the 'release' array so that an out-of-scope array isn't accessed. Bug detected by clang's address sanitizer. Fixes: 07bc5c69 ("perf tools: Make fetch_kernel_version() publicly available") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20190926220018.25402-1-irogers@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ard Biesheuvel authored
commit c05f8f92 upstream. The kernel command line option efivar_ssdt= allows the name to be specified of an EFI variable containing an ACPI SSDT table that should be loaded into memory by the OS, and treated as if it was provided by the firmware. Currently, that code will always iterate over the EFI variables and compare each name with the provided name, even if the command line option wasn't set to begin with. So bail early when no variable name was provided. This works around a boot regression on the 2012 Mac Pro, as reported by Scott. Tested-by:
Scott Talbert <swt@techie.net> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.9+ Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Dave Young <dyoung@redhat.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Matthew Garrett <mjg59@google.com> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux-integrity@vger.kernel.org Fixes: 475fb4e8 ("efi / ACPI: load SSTDs from EFI variables") Link: https://lkml.kernel.org/r/20191002165904.8819-3-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Frey authored
commit 82f30156 upstream. When an end-of-conversion interrupt is received after performing a single-shot reading of the light sensor, the driver was waking up the result ready queue before checking opt->ok_to_ignore_lock to determine if it should unlock the mutex. The problem occurred in the case where the other thread woke up and changed the value of opt->ok_to_ignore_lock to false prior to the interrupt thread performing its read of the variable. In this case, the mutex would be unlocked twice. Signed-off-by:
David Frey <dpfrey@gmail.com> Reviewed-by:
Andreas Dannenberg <dannenberg@ti.com> Fixes: 94a9b7b1 ("iio: light: add support for TI's opt3001 light sensor") Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans de Goede authored
commit 97291741 upstream. Since commit 9bcf15f7 ("iio: adc: axp288: Fix TS-pin handling") we preserve the bias current set by the firmware at boot. This fixes issues we were seeing on various models, but it seems our old hardcoded 80ųA bias current was working around a firmware bug on at least one model laptop. In order to both have our cake and eat it, this commit adds a dmi based list of models where we need to override the firmware set bias current and adds the one model we now know needs this to it: The Lenovo Ideapad 100S (11 inch version). Fixes: 9bcf15f7 ("iio: adc: axp288: Fix TS-pin handling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203829Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marco Felsch authored
commit c62dd449 upstream. Since commit 0f7ddcc1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe") the error path is wrong since it leaves the vref regulator on. Fix this by disabling both regulators. Fixes: 0f7ddcc1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe") Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andreas Klinger authored
commit 4043ecfb upstream. Fix bug in sampling function hx711_cycle() when interrupt occures while PD_SCK is high. If PD_SCK is high for at least 60 us power down mode of the sensor is entered which in turn leads to a wrong measurement. Switch off interrupts during a PD_SCK high period and move query of DOUT to the latest point of time which is at the end of PD_SCK low period. This bug exists in the driver since it's initial addition. The more interrupts on the system the higher is the probability that it happens. Fixes: c3b2fdd0 ("iio: adc: hx711: Add IIO driver for AVIA HX711") Signed-off-by:
Andreas Klinger <ak@it-klinger.de> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Navid Emamdoost authored
commit 80b15db5 upstream. In vt6655_probe, if vnt_init() fails the cleanup code needs to be called like other error handling cases. The call to device_free_info() is added. Fixes: 67013f2c ("staging: vt6655: mac80211 conversion add main mac80211 functions") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191004200319.22394-1-navid.emamdoost@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Navid Emamdoost authored
commit 5bdea606 upstream. In fbtft_framebuffer_alloc the error handling path should take care of releasing frame buffer after it is allocated via framebuffer_alloc, too. Therefore, in two failure cases the goto destination is changed to address this issue. Fixes: c296d5f9 ("staging: fbtft: core support") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190930030949.28615-1-navid.emamdoost@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bruce Chen authored
commit e91aafcb upstream. When toggling the level trigger to emulate the edge trigger, the EIC offset is incorrect without adding the corresponding bank index, thus fix it. Fixes: 7bf0d7f6 ("gpio: eic: Add edge trigger emulation for EIC") Cc: stable@vger.kernel.org Signed-off-by:
Bruce Chen <bruce.chen@unisoc.com> Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
commit f8204f0d upstream. The fixed MKHI client on PCH 6 gen platforms does not support fw version retrieval. The error is not fatal, but it fills up the kernel logs and slows down the driver start. This patch disables requesting FW version on GEN6 and earlier platforms. Fixes warning: [ 15.964298] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version [ 15.964301] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: version command failed -5 Cc: <stable@vger.kernel.org> +v4.18 Cc: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191004181722.31374-1-tomas.winkler@intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
commit 4d86dfd3 upstream. Add Comet Point devices IDs for Comet Lake U platforms. Cc: <stable@vger.kernel.org> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191001235958.19979-1-tomas.winkler@intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 726b55d0 upstream. The driver was accessing its struct usb_device in its release() callback without holding a reference. This would lead to a use-after-free whenever the device was disconnected while the character device was still open. Fixes: fef526ca ("USB: legousbtower: remove custom debug macro") Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-5-johan@kernel.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 0b074f69 upstream. The driver would return with a nonzero open count in case the reset control request failed. This would prevent any further attempts to open the char dev until the device was disconnected. Fix this by incrementing the open count only on successful open. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190919083039.30898-5-johan@kernel.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-