- 13 Feb, 2021 12 commits
-
-
Florian Westphal authored
Allow userspace (mptcpd) to subscribe to mptcp genl multicast events. This implementation reuses the same event API as the mptcp kernel fork to ease integration of existing tools, e.g. mptcpd. Supported events include: 1. start and close of an mptcp connection 2. start and close of subflows (joins) 3. announce and withdrawals of addresses 4. subflow priority (backup/non-backup) change. Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Once event support is added this may need to allocate memory while msk lock is held with softirqs disabled. Not using lock_fast also allows to do the allocation with GFP_KERNEL. Signed-off-by:
-
Florian Westphal authored
Pass the first/initial subflow to the existing functions so they can pass this on to the notification handler that is added later in the series. Signed-off-by:
-
Florian Westphal authored
In case mptcp socket is already dead the entire mptcp socket will be freed. We can avoid the close check in this case. Signed-off-by:
-
Florian Westphal authored
When remote side closes a subflow we should schedule the worker to dispose of the subflow in a timely manner. Otherwise, SF_CLOSED event won't be generated until the mptcp socket itself is closing or local side is closing another subflow. Signed-off-by:
-
Florian Westphal authored
Prepare for subflow close events: When mptcp connection is torn down its enough to send the mptcp socket close notification rather than a subflow close event for all of the subflows followed by the mptcp close event. This splits the helper: mptcp_close_ssk() will emit the close notification, __mptcp_close_ssk will not. Signed-off-by:
-
Florian Westphal authored
Allows to make some functions static and avoids acquire of the pm spinlock in protocol.c. Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Selftest enhancement and fixes This is a collection of selftest updates from the MPTCP tree. Patch 1 uses additional 'ss' command line parameters and 'nstat' to improve output when certain MPTCP tests fail. Patches 2 & 3 fix a copy/paste error and some output formatting. Patch 4 makes sure tests still pass if certain connection-related packets are retransmitted. ==================== Signed-off-by: -
Matthieu Baerts authored
If we receive less MPCapable SYN or 3rd ACK than expected, we now mark the test as failed. On the other hand, if we receive more, we keep the warning but we add a hint that it is probably due to retransmissions and that's why we don't mark the test as failed. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/148Signed-off-by:
-
Matthieu Baerts authored
Before we had this in case of SYN retransmissions: (...) # ns4 MPTCP -> ns2 (10.0.1.2:10034 ) MPTCP (duration 1201ms) [ OK ] # ns4 MPTCP -> ns2 (dead:beef:1::2:10035) MPTCP (duration 1242ms) [ OK ] # ns4 MPTCP -> ns2 (10.0.2.1:10036 ) MPTCP ns2-60143c00-cDZWo4 SYNRX: MPTCP -> MPTCP: expect 11, got # 13 # (duration 6221ms) [ OK ] # ns4 MPTCP -> ns2 (dead:beef:2::1:10037) MPTCP (duration 1427ms) [ OK ] # ns4 MPTCP -> ns3 (10.0.2.2:10038 ) MPTCP (duration 881ms) [ OK ] (...) Now we have: (...) # ns4 MPTCP -> ns2 (10.0.1.2:10034 ) MPTCP (duration 1201ms) [ OK ] # ns4 MPTCP -> ns2 (dead:beef:1::2:10035) MPTCP (duration 1242ms) [ OK ] # ns4 MPTCP -> ns2 (10.0.2.1:10036 ) MPTCP (duration 6221ms) [ OK ] WARN: SYNRX: expect 11, got 13 # ns4 MPTCP -> ns2 (dead:beef:2::1:10037) MPTCP (duration 1427ms) [ OK ] # ns4 MPTCP -> ns3 (10.0.2.2:10038 ) MPTCP (duration 881ms) [ OK ] (...) So we put everything on one line, keep the durations and "OK" aligned and removed duplicated info to short the warning. Signed-off-by:
-
Matthieu Baerts authored
Info from received MPCapable SYN were printed instead of the ones from received MPCapable 3rd ACK. Fixes: fed61c4b ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally") Signed-off-by:
-
Paolo Abeni authored
Even if that may sound completely unlikely, the mptcp implementation is not perfect, yet. When the self-tests report an error we usually need more information of what the scripts currently report. iproute allow provides some additional goodies since a few releases, let's dump them. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
- 12 Feb, 2021 27 commits
-
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: some cleanups for -next To improve code readability and maintainability, the series refactor out some bloated functions in the HNS3 ethernet driver. change log: V2: remove an unused variable in #5 previous version: V1: https://patchwork.kernel.org/project/netdevbpf/cover/1612943005-59416-1-git-send-email-tanhuazhong@huawei.com/ ==================== Acked-by:
Jakub Kicinski <kuba@kernel.org>
-
Hao Chen authored
hclge_rm_vport_all_mac_table() is bloated, so split it into separate functions for readability and maintainability. Signed-off-by:
Hao Chen <chenhao288@hisilicon.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
To make it more readable and maintainable, split hclgevf_set_rss_tuple() into two parts. Signed-off-by:
-
Huazhong Tan authored
To make it more readable and maintainable, split hclge_set_rss_tuple() into two parts. Signed-off-by:
-
Yufeng Mo authored
hclgevf_cmd_send() is bloated, so split it into separate functions for readability and maintainability. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
hclge_cmd_send() is bloated, so split it into separate functions for readability and maintainability. Signed-off-by:
-
Jian Shen authored
hclge_dbg_dump_qos_buf_cfg() is bloated, so split it into separate functions for readability and maintainability. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Jian Shen authored
To improve code readability and maintainability, separate the flow type parsing part and the converting part from bloated hclgevf_get_rss_tuple(). Signed-off-by:
-
Jian Shen authored
To improve code readability and maintainability, separate the flow type parsing part and the converting part from bloated hclge_get_rss_tuple(). Signed-off-by:
-
Peng Li authored
To improve code readability and maintainability, separate the command handling part and the status parsing part from bloated hclge_set_vf_vlan_common(). Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Jiaran Zhang authored
Use common ipv6_addr_any() to determine if an addr is ipv6 any addr. Signed-off-by:
Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by:
-
Peng Li authored
As more commands are added, hns3_dbg_cmd_write() is going to get more bloated, so move the part about command check into a separate function. Signed-off-by:
-
Peng Li authored
To improve code readability and maintainability, refactor hclgevf_cmd_convert_err_code() with an array of imp_errcode and common_errno mapping, instead of a bloated switch/case. Signed-off-by:
-
Peng Li authored
To improve code readability and maintainability, refactor hclge_cmd_convert_err_code() with an array of imp_errcode and common_errno mapping, instead of a bloated switch/case. Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== Compile-flag for sock RX queue mapping Socket's RX queue mapping logic is useful also for non-XPS use cases. This series breaks the dependency between the two, introducing a new kernel config flag SOCK_RX_QUEUE_MAPPING. Here we select this new kernel flag from TLS_DEVICE, as well as XPS. ==================== Acked-by: -
Tariq Toukan authored
No real dependency on XPS, but on RX queue mapping, which is being selected by TLS_DEVICE. Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
-
Tariq Toukan authored
Compile-in the socket RX queue mapping field and logic when TLS_DEVICE is enabled. This allows device drivers to pick the recorded socket's RX queue and use it for streams distribution. Signed-off-by:
-
Tariq Toukan authored
Use a new config SOCK_RX_QUEUE_MAPPING to compile-in the socket RX queue field and logic, instead of the XPS config. This breaks dependency in XPS, and allows selecting it from non-XPS use cases, as we do in the next patch. In addition, use the new flag to wrap the logic in sk_rx_queue_get() and protect access to the sk_rx_queue_mapping field, while keeping the function exposed unconditionally, just like sk_rx_queue_set() and sk_rx_queue_clear(). Signed-off-by:
-
Arjun Roy authored
Explicitly define reserved field and require it and any subsequent fields to be zero-valued for now. Additionally, limit the valid CMSG flags that tcp_zerocopy_receive accepts. Fixes: 7eeba170 ("tcp: Add receive timestamp support for receive zerocopy.") Signed-off-by:
Arjun Roy <arjunroy@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Suggested-by:
David Ahern <dsahern@gmail.com> Suggested-by:
Leon Romanovsky <leon@kernel.org> Suggested-by:
-
Heiner Kallweit authored
Cleaning up tx descriptors first increases the chance that rtl_rx() can allocate new skb's from the cache. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Cong Wang authored
dev_ifsioc_locked() is called with only RCU read lock, so when there is a parallel writer changing the mac address, it could get a partially updated mac address, as shown below: Thread 1 Thread 2 // eth_commit_mac_addr_change() memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); // dev_ifsioc_locked() memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr,...); Close this race condition by guarding them with a RW semaphore, like netdev_get_name(). We can not use seqlock here as it does not allow blocking. The writers already take RTNL anyway, so this does not affect the slow path. To avoid bothering existing dev_set_mac_address() callers in drivers, introduce a new wrapper just for user-facing callers on ioctl and rtnetlink paths. Note, bonding also changes slave mac addresses but that requires a separate patch due to the complexity of bonding code. Fixes: 3710becf ("net: RCU locking for simple ioctl()") Reported-by:
"Gong, Sishuai" <sishuai@purdue.edu> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
Stefan Chulski authored
The condition should be skipped if CPU ID equal to nthreads. The patch doesn't fix any actual issue since nthreads = min_t(unsigned int, num_present_cpus(), MVPP2_MAX_THREADS). On all current Armada platforms, the number of CPU's is less than MVPP2_MAX_THREADS. Fixes: e531f767 ("net: mvpp2: handle cases where more CPUs are available than s/w threads") Reported-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Stefan Chulski <stefanc@marvell.com> Reviewed-by:
-
David S. Miller authored
Vignesh Raghavendra says: ==================== net: ti: am65-cpsw-nuss: Add switchdev driver This series adds switchdev support for AM65 CPSW NUSS driver to support multi port CPSW present on J721e and AM64 SoCs. It adds devlink hook to switch b/w switch mode and multi mac mode. v2: Rebased on latest net-next Update patch 1/4 with rationale for using devlink ====================
-
Vignesh Raghavendra authored
J721e, J7200 and AM64 have multi port switches which can work in multi mac mode and in switch mode. Add documentation explaining how to use different modes. Borrowed from: Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Vignesh Raghavendra authored
J721e, J7200 and AM64 have multi port switches which can work in multi mac mode and in switch mode. Add support for configuring this HW in switch mode using devlink and switchdev notifiers. Support is similar to existing CPSW switchdev implementation of TI's 32 bit platform like AM33/AM43/AM57. To enable switch mode: devlink dev param set platform/8000000.ethernet name switch_mode value true cmode runtime All configuration is implemented via switchdev API and notifiers. Supported: - SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS - SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS - SWITCHDEV_ATTR_ID_PORT_STP_STATE - SWITCHDEV_OBJ_ID_PORT_VLAN - SWITCHDEV_OBJ_ID_PORT_MDB - SWITCHDEV_OBJ_ID_HOST_MDB Hence AM65 CPSW switchdev driver supports: - FDB offloading - MDB offloading - VLAN filtering and offloading - STP Signed-off-by: -
Vignesh Raghavendra authored
Register netdevice notifiers in order to receive notification when individual MAC ports are added to the HW bridge. Signed-off-by:
-
Vignesh Raghavendra authored
AM65 NUSS ethernet switch on K3 devices can be configured to work either in independent mac mode where each port acts as independent network interface (multi mac) or switch mode. Add devlink hooks to provide a way to switch b/w these modes. Rationale to use devlink instead of defaulting to bridge mode is that SoC use cases require to support multiple independent MAC ports with no switching so that users can use software bridges with multi-mac configuration (e.g: to support LAG, HSR/PRP, etc). Also, switching between multi mac and switch mode requires significant Port and ALE reconfiguration, therefore is easier to be made as part of mode change devlink hooks. It also allows to keep user interface similar to what was implemented for the previous generation of TI CPSW IP (on AM33/AM43/AM57 SoCs). Signed-off-by:
-
- 11 Feb, 2021 1 commit
-
-
David S. Miller authored
Rafał Miłecki says: ==================== bcm4908_enet: post-review fixes V2 of my BCM4908 Ethernet patchset was applied to the net-next.git and it was later that is received some extra reviews. I'm sending patches that handle pointed out issues. David: earler I missed that V2 was applied and I sent V3 and V4 of my inital patchset. Sorry for that. I think it's the best to ignore V3 and V4 I sent and proceed with this fixes patchset instead. ==================== Signed-off-by:
-
